Constant power button and greyed out screen (needed restart)
So I'll use my computer in the normal way that I would (ichat, MSWord,iTunes and maybe some other programs) and every now and again (more often than that actually) the computer screen would go dark and I would get a notification that I need to restart my computer in the way of holding down the power button.
I've run though disk utilities and fixed whatever problems it could. I've also run the Maintanence automation from the download site.
This is usually what will happen:
I'll use my computer normally
a program will quit unexpectadly
a) annother program will quit in the same way and then the computer will crash
b) the computer will crash
I've had this computer for a year and this only started happening a month or so after a full reinstalation of MaxOSX (annual cleanup)
What should I do?
After doing more reading into my issue I figured what was going on was my Kernel was Panicking (can I use the terms like that or is it just Kernel Panic... anyway)
so I went ahead and found the logs on it and as you can see, it's happened a few times SO... without further stalling:
Thu Jun 15 23:00:31 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000080610050 PC=0x000000000003FCFC
Latest crash info for cpu 0:
Exception state (sv=0x44E00000)
PC=0x0003FCFC; MSR=0x00009030; DAR=0x80610050; DSISR=0x40000000; LR=0x0003FCE4; R1=0x21F1BCF0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0282F4D0 0x001401B0 0x0016350C 0x0028F804 0x00295358 0x002AABD4
0x000ABEB0 0x2F2F2F2F
Proceeding back via exception chain:
Exception state (sv=0x44E00000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x383DEA00)
PC=0x9001B1EC; MSR=0x0200F030; DAR=0x00880000; DSISR=0x40000000; LR=0x913E6748; R1=0xF01803F0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x44E00000)
PC=0x0003FCFC; MSR=0x00009030; DAR=0x80610050; DSISR=0x40000000; LR=0x0003FCE4; R1=0x21F1BCF0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0282F4D0 0x001401B0 0x0016350C 0x0028F804 0x00295358 0x002AABD4
0x000ABEB0 0x2F2F2F2F
Exception state (sv=0x383DEA00)
PC=0x9001B1EC; MSR=0x0200F030; DAR=0x00880000; DSISR=0x40000000; LR=0x913E6748; R1=0xF01803F0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Tue Jun 20 17:52:10 2006
Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x000000000000D8EC PC=0x0000000000000000
Latest crash info for cpu 0:
Exception state (sv=0x3818E280)
PC=0x00000000; MSR=0x40009030; DAR=0x0000D8EC; DSISR=0x40000000; LR=0x0025EF70; R1=0x22073D00; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x00000000 0x0025F174 0x0025D26C 0x0025CFCC 0x002AABD4 0x000ABEB0
0x73747269
backtrace terminated - frame not mapped or invalid: 0xF00FF840
Proceeding back via exception chain:
Exception state (sv=0x3818E280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x37DFF000)
PC=0x9001494C; MSR=0x0000D030; DAR=0xA130C1EB; DSISR=0x40000000; LR=0x907DCC74; R1=0xF00FF840; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x3818E280)
PC=0x00000000; MSR=0x40009030; DAR=0x0000D8EC; DSISR=0x40000000; LR=0x0025EF70; R1=0x22073D00; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x00000000 0x0025F174 0x0025D26C 0x0025CFCC 0x002AABD4 0x000ABEB0
0x73747269
backtrace terminated - frame not mapped or invalid: 0xF00FF840
Exception state (sv=0x37DFF000)
PC=0x9001494C; MSR=0x0000D030; DAR=0xA130C1EB; DSISR=0x40000000; LR=0x907DCC74; R1=0xF00FF840; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Wed Jun 21 01:08:21 2006
Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x000000000000D8EC PC=0x0000000000000000
Latest crash info for cpu 0:
Exception state (sv=0x3818E280)
PC=0x00000000; MSR=0x40009030; DAR=0x0000D8EC; DSISR=0x40000000; LR=0x0025EF70; R1=0x22073D00; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x00000000 0x0025F174 0x0025D26C 0x0025CFCC 0x002AABD4 0x000ABEB0
0x73747269
backtrace terminated - frame not mapped or invalid: 0xF00FF840
Proceeding back via exception chain:
Exception state (sv=0x3818E280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x37DFF000)
PC=0x9001494C; MSR=0x0000D030; DAR=0xA130C1EB; DSISR=0x40000000; LR=0x907DCC74; R1=0xF00FF840; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x3818E280)
PC=0x00000000; MSR=0x40009030; DAR=0x0000D8EC; DSISR=0x40000000; LR=0x0025EF70; R1=0x22073D00; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x00000000 0x0025F174 0x0025D26C 0x0025CFCC 0x002AABD4 0x000ABEB0
0x73747269
backtrace terminated - frame not mapped or invalid: 0xF00FF840
Exception state (sv=0x37DFF000)
PC=0x9001494C; MSR=0x0000D030; DAR=0xA130C1EB; DSISR=0x40000000; LR=0x907DCC74; R1=0xF00FF840; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Wed Jun 21 11:02:07 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000003CF73AC PC=0x000000000003ECC8
Latest crash info for cpu 0:
Exception state (sv=0x3867A280)
PC=0x0003ECC8; MSR=0x00001030; DAR=0x03CF73AC; DSISR=0x40000000; LR=0x0003ED2C; R1=0x21FD3AC0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x0003ED2C 0x0003F0C0 0x0001CF90 0x0001CE78 0x0001AC44
0x00029574 0x0002E614 0x0003C744 0x000A9894
Proceeding back via exception chain:
Exception state (sv=0x3867A280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3846A500)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x3867A280)
PC=0x0003ECC8; MSR=0x00001030; DAR=0x03CF73AC; DSISR=0x40000000; LR=0x0003ED2C; R1=0x21FD3AC0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x0003ED2C 0x0003F0C0 0x0001CF90 0x0001CE78 0x0001AC44
0x00029574 0x0002E614 0x0003C744 0x000A9894
Exception state (sv=0x3846A500)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Wed Jun 21 14:10:27 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000001 PC=0x00000000001026EC
Latest crash info for cpu 0:
Exception state (sv=0x456C0780)
PC=0x001026EC; MSR=0x00001030; DAR=0x00000001; DSISR=0x40000000; LR=0x001026E0; R1=0x220E3490; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x001026E0 0x00102BD8 0x0002CE94 0x002741FC 0x00274670 0x00008ED0
0x02768EC8
backtrace terminated - frame not mapped or invalid: 0xF0F00000
Proceeding back via exception chain:
Exception state (sv=0x456C0780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x388E7780)
PC=0x90019ACC; MSR=0x0000D930; DAR=0x37FEDFC6; DSISR=0x40000000; LR=0x000115E0; R1=0xBFFFF400; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x456C0780)
PC=0x001026EC; MSR=0x00001030; DAR=0x00000001; DSISR=0x40000000; LR=0x001026E0; R1=0x220E3490; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x001026E0 0x00102BD8 0x0002CE94 0x002741FC 0x00274670 0x00008ED0
0x02768EC8
backtrace terminated - frame not mapped or invalid: 0xF0F00000
Exception state (sv=0x388E7780)
PC=0x90019ACC; MSR=0x0000D930; DAR=0x37FEDFC6; DSISR=0x40000000; LR=0x000115E0; R1=0xBFFFF400; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Fri Jun 23 09:54:51 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002C1D9000 PC=0x000000000094F040
Latest crash info for cpu 0:
Exception state (sv=0x3846F780)
PC=0x0094F040; MSR=0x0000B030; DAR=0x2C1D9000; DSISR=0x42000000; LR=0x0094EFC0; R1=0x22053BF0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0094EFC0 0x0092CFAC 0x002E87E0 0x002EA6AC 0x0008C4B0 0x000291C0
0x000233AC 0x000AC02C 0x67743B49
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x925000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x843000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x867000
Proceeding back via exception chain:
Exception state (sv=0x3846F780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x38535780)
PC=0x9000B0A8; MSR=0x0200F030; DAR=0x000E9F50; DSISR=0x40000000; LR=0x9000AFFC; R1=0xBFFFE8E0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x3846F780)
PC=0x0094F040; MSR=0x0000B030; DAR=0x2C1D9000; DSISR=0x42000000; LR=0x0094EFC0; R1=0x22053BF0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0094EFC0 0x0092CFAC 0x002E87E0 0x002EA6AC 0x0008C4B0 0x000291C0
0x000233AC 0x000AC02C 0x67743B49
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x925000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x843000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x867000
Exception state (sv=0x38535780)
PC=0x9000B0A8; MSR=0x0200F030; DAR=0x000E9F50; DSISR=0x40000000; LR=0x9000AFFC; R1=0xBFFFE8E0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Fri Jun 23 11:58:12 2006
panic(cpu 0 caller 0x000A8D80): Uncorrectable machine check: pc = 000000000009D78C, msr = 0000000000141000, dsisr = 0A000000, dar = 000000008FE532C8
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8D80 0x000A8010 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x39DFD780)
PC=0x0009D78C; MSR=0x00141000; DAR=0x8FE532C8; DSISR=0x0A000000; LR=0x0009D6C8; R1=0x21FC34D0; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x030DE948 0x0009A0A8 0x00098EB4 0x0006AA14 0x0006B100 0x0006B5F0
0x00038070 0x002658B8 0x002722EC 0x00025250 0x000AC138 0x00026CF4 0x000A8B3C 0x000A88FC
0x000ABD00
Exception state (sv=0x37B23500)
PC=0x90A3AF80; MSR=0x0000D030; DAR=0x00000000; DSISR=0x40000000; LR=0x90A3AED0; R1=0xBFFFF5E0; XCP=0x00000003 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Fri Jun 23 13:10:39 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000180 PC=0x00000000002D6F08
Latest crash info for cpu 0:
Exception state (sv=0x383A5500)
PC=0x002D6F08; MSR=0x00009030; DAR=0x00000180; DSISR=0x40000000; LR=0x0092939C; R1=0x2205BC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0092B634 0x0092939C 0x0092A904 0x0092A9E0 0x002D0940 0x002CF808
0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x925000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x8ba000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8de000
Proceeding back via exception chain:
Exception state (sv=0x383A5500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3D415C80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x383A5500)
PC=0x002D6F08; MSR=0x00009030; DAR=0x00000180; DSISR=0x40000000; LR=0x0092939C; R1=0x2205BC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0092B634 0x0092939C 0x0092A904 0x0092A9E0 0x002D0940 0x002CF808
0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x925000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x8ba000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8de000
Exception state (sv=0x3D415C80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
Fri Jun 23 13:36:23 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000180 PC=0x00000000002D6F08
Latest crash info for cpu 0:
Exception state (sv=0x383A5500)
PC=0x002D6F08; MSR=0x00009030; DAR=0x00000180; DSISR=0x40000000; LR=0x0092939C; R1=0x2205BC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0092B634 0x0092939C 0x0092A904 0x0092A9E0 0x002D0940 0x002CF808
0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x925000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x8ba000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8de000
Proceeding back via exception chain:
Exception state (sv=0x383A5500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3D415C80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x383A5500)
PC=0x002D6F08; MSR=0x00009030; DAR=0x00000180; DSISR=0x40000000; LR=0x0092939C; R1=0x2205BC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0092B634 0x0092939C 0x0092A904 0x0092A9E0 0x002D0940 0x002CF808
0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x925000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x8ba000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8de000
Exception state (sv=0x3D415C80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
As a note I really do appreciate people looking at my issue and thank anyone in advance what would take a look at this.
Cheers
Similar Messages
-
Won't wakeup w/o power button, then grey dimmed screen with progress bar
Hello to all,
My PB Alu works flawlessly but for one problem. I can't wake it up as I usually do by simply touching the keyboard or opening it up.
I now have to push the power button for a long time, then it kind of restarts but instead of getting the usual startup, I get the last screen I had when the computer got in sleep mode, totally dimmed and in black and white (slightly grey) with a progress bar at the bottom. When finished, the computer returns to the screen I had when I put it to sleep.
A long slow procedure and specially annoying when an external screen is connected.
What can this be?
Thanks for the help.
MarkHello:
I would try restoring as an approach to eliminating some software glitch. However, you might also have a hardware problem (not good news).
Barry -
Tx ML81n missing buttons and greyed out fields
Hi,
Can anyone suggest why i miss in tx ML81n buttons (insert line, delete service line, service selection) and are fields as Service number, short text, quanty, unit of measure, gross price greyed out in my DEV although in the QAS and PROD it all works properly?
Normally it cant be an authorisation issue since i have sap_all.
thanks.
PeterHi,
Thanks for your replies. But yes it is in change mode and it is exactly there (Other Purchase Order and the create entry sheet) where i have this problem. So it is when i am in change mode and have created a new entry sheet.
So when being in tab: basic data, fields as external number location etc are fill in fields, below that there are the lines, there the fill in fields are greyed out.
Please suggest.
regards,
Peter -
I pushed the power button and now the screen won't light up and the keyboard lights a on
Have have purchased a MacBook Air 13" and as I went to go turn the volume up, I pushed the power button instead, now the display is black and the keyboard lights are still on! I don't no what to do plez help
In OS X Mavericks behavior of the power button changed.
Power button /sleep function
http://support.apple.com/kb/HT5869
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best. -
Our I-Pad has never connected with our wireless internet from since we got it. Our laptop connects just fine and we have a strong signal. We now have a locked screen stated that I-cloud has not been backed up in 9 weeks. Plug into internet? However when you click the button to try to get to the internet it does nothing. The power off button is greyed out so not an option to shut down. Just froze on that screen?
Any help would be greatly appreciated:)
Thank you in advance.Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
As the title states everytime I boot up my mini mac the 'go back' and 'continue' buttons are greyed out and I cannot continue with the installation. I even went out and bought an external cd drive to try and load the operating system and that did not work either.
Hi, what OS version is it? And which year Mini?
-
my iphone blanked out and will not cut on i tried holding the power button and the home button any advice?
Hey there mello12,
It sounds like you are not able to turn on your phone. You should use these steps in the following article to help resolve it, or setup service if needed:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Take care,
Sterling -
After I open the first Firefox browser window, any additional window I open does not open my homepage, but opens a blank page with "New Tab" showing on the tab. An orange "Firefox" tab with a drop down arrow shows at the upper left hand corner of the screen. All of the options (File, Edit, etc.) are greyed out, however they will work if you move your cursor over them.
The URL address window says "Go to a Web Site". After I've gone to a website, the back button remains greyed out and I am not able to go back to a previous page. My RoboForm and Netcraft toolbars only show up in an abbreviate form. The add-on bar doesn't show up at all.
Again, this is a recent problem, and only happens after I've opened one browser window (which works fine) and then open additional browser windows (as few as one additional).I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)
-
i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work. -
when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution
restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired
-
Why does my ipod keeps powering off, when I have to turn it on ... I have to press on the power button and the screen button at the same time ??? over and over again. I just got this in December 2011 as a gift.
I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.
-
Firefox loads to a blank page, not my home page. When I click on the home button it takes me to the home page. The back, forward, refresh and stop buttons are greyed out and not usable. The webpage I am on does not show up in the address bar. If I type something into the address bar, that address stays there no matter what page I go to next.
Just upgraded to v4. It did NOT fix the problem.
-
Please can someone help a total technophobe?!!! I have recently set up a new mail account and since I've done that my wifi button has greyed out. Not sure what happened as I had help from my daughter. She doesn't think that she did anything wrong as has been an iPhone user since day one!! She's at work now so I'm totally lost. Please help. Many thanks.
it's' an issue on 4S..... here same problem, even after restore the firmware.... wifi and bt are lost....
-
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
Maybe you are looking for
-
New iMovie app for iPhone 4 not showing up in Location Services (Settings)
iMovie app for iPhone 4 not showing up in Location Services (Settings). It apprently needs to be both viaible and turned on in Settings/General/Location Services in order for the app to discover previously taken video (Location Services correctly rec
-
Deleting alternate frames from the timeline
Hi I have a movie which is made up of individual frames (like an old style cartoon animation), whereby each frame moves on a bit from the previous one and when viewed in Flash, looks like a movie. I want to remove some of the frames - probably every
-
Hello Recently, the volume buttons, pause/play, fast forward and rewind media keys only work when I am on the Now Playing screen whereas they were working on every other screen in the past; even when my phone was locked. I don't know why it's suddenl
-
Display blob file with oracle forms
I need to display an image file with oracle forms. can any body tell me how to do this ? Thanks
-
Connect 10.9 to a 10.6 directory
I'm having issues binding my 10.9 server to my 10.6 server which hosts open directory. On the 10.9 server I can add my 10.6 LDAP directory in directory utility.app, but none of my users from 10.6 are visible in the server.app on my 10.9 machine. I kn