Conversion of prod orders

Hi, when we convert planned order into production orders in md04 aftr mrp run, please advise how system knows that the prod order type is pp01 or pp03 etc?. what i mean is that since we will have n numbr of sfg/fg, how system knows that for certain material  sfg / fg it is pp01 or for certain materials it is pp03 etc? please advise.

Dear Raju,
1) Go to plant parameters i.e OPPQ , here
2) give ur plant & execute
3) Now u have maintain Plan orders option, just under that u have option Conversion
4) Now click this, again an option is there plan order to Production order
5) Click this, now for prodution order we can give PP01 or PP03 ( the conversion will take place from here
6) another input will be OPKP, for ur plant & order type
7) U can give Order type , just scroll down the mouse u will get under order type option
8) make to Stock - here u can give ur order type
Regards
kumar

Similar Messages

  • MD04 to CO40 - PLOR conversion to Prod Order Problem

    Hi,
    I have the following Problem,
    When converting Planned Orders to Production Orders in MD04 and calling C040 this does not take account of my BOM status which is set to block, but if I create a Production Order directly in CO01 the BOM status is referenced and the creation of the Production order is denied but this does not happen with MD04 calling CO01.
    I have searched OSS and found Note 453755 which is the exact problem I am having, but the note only refers to version 4.6c however we are on 4.7.
    Anyone have similar problems please let me know how you resolved it.
    Thanks

    Hello,
    Even the Note is applicable to only 4.5Version, Check if the Code is already incorporated in your current version. if not you might need to implement that note.
    Hope this helps.
    Rajeev

  • Conversion of planned orders to prod orders in background

    hi All
    Is there any program for mass conversion of planned orders in production orders which we can schedule in background.
    Amit

    Hi Amit,
    Try below method
    TCode: COHV (tab selection --- plant and etc...,, tab mass processing --- function - conveted planned order, order type - PP01, collective orders - do not collective orders)
    after Menu -- Program --- Excute in background -- set properties -- to set send SAP spooler --- click button immediate then check box periodic job and periodic values after save
    to monitor and get spool request bcackground this job
    TCode SM37
    or
    you can create background job using TCode SM36
    pls create varient for COHV
    PRG: PPIO_ENTRY with Varient
    Regards,
    Sankaran

  • Converting SNP Planned Order /Purch Req to Prod.Order/Purch.Order

    Guys
    What is the standard process to Convert the SNP Planned Order /Purch Req. into a Prod.Order/Purch.Order ?
    Can the conversion indicator be set in APO for SNP Planned Order /Purch Req.and then transferred to R3 as Prod.Order/Purch.Order  or can the convesrion of Planned Order /Purch Req to Prod.Order/Purch.Order  can be done in R3 itself ?
    I am not clear on how exactly this works. Would appreicate if you could provide me with the standard process and any config involved in the same such as Number Ranges and how to set the conversion indicator automatically through SNP planning runs ?
    Thanks

    When you set this indicator for a planned order or a purchase
    requisition, the system automatically converts the order into a
    Production order or purchase order after the transfer to the
    connected SAP R/3 system.
    The converted orders are then retransferred to the SAP APO system with a
    different category; a purchase requisition with category BS-ANF becomes
    a purchase order delivery schedule line with category BS-EIN.
    Please check configuration setting in SPro for transfer setting to R/3.
    1. Configure Transfer to OLTP Systems(SNP)
    2.Maintain Global Parameters and Defaults(PPDS)
    Also on R/3 side you can see it in MD04/MD07 collectively for a product . or individually on
    MD13 : planned order
    MB51n: PR
    Manish

  • Prod Order Type Automatic selection

    Dear Sir,
    In MTO, after MRP run, during the conversion of planned order to production order, how system detect the production order type automatically if I have more that one production order type.
    Thanks and Regards,
    Chetan

    Dear Chetan,
    1.Check if the production scheduling profile/production scheduler has been assigned in the material master.
    2.If only production scheduler has been maintained means,then in OPJ9,check whether this prod.scheduler has been linked to
    prod scheduling profile(through which the default order type can be set),if only prod scheduling profile means then directly check
    in OPKP for this profile what is the order type.
    3.IF no prod.scheduler/prod scheduling profile has been maintained means check whether any MRP group has been assigned in
    MRP1 view which has the default production order type settings in OPPR.
    Check and revert back
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Aug 22, 2011 12:37 PM

  • Order type for conversion of planned order

    Hi gurus,
    I have configured 6 different order types for PPPI and not maintained any default order type for conversion of planned order into process order. But when I am trying to convert planned order into process order by branching out from MD04 to COR7 via the popup window, default order type PI01 gets selected which  cannot be changed. However, if I am converting the planned order into process order directly through COR7, then choice of order type is available.
    Could you please tell me how to ensure choice of order type while branching from MD04 to COR7?
    Regards,
    Abhik

    Hi Datta
    The order type is selected as below
    First it will look for any scheduling profile is maintained. If so it will select default from the profile.
    Next if the profile is not there it will look for any scheduler is assigned in material master. Through the scheduler it will select the profile and default order order type.
    Next it will look in plant parameter. With conversion from plan order to prod order  order type
    Next it will look in MRP group conversion order type,  if you have mainted it in Material master.
    This is the sequence. Please check have to maintained any of these.
    Hope this is clear
    Regards
    J . Saravan

  • Conversion of Planned order into a Production Order.

    Hi All,
             I have one ticket in which I have to change the format of generating serial no.s.This format has to consider
    Basic Start Date while generating it.In our project Serial No is getting generated at the time of Production Order.
    So I have to pass this start date before Prod Order is getting created from a Planned Order.What i want to know is it possible to pass a start date when a Planned Order is getting converted into Prod Order as i think it will be a standard SAP program which will convert a Planned Order into Prod Order.Any suggestions on how to achieve this is most welcome.
    Thanks in Advance,
    Saket

    Hi,
    I am not able to get what is passing the start date.
    Second thing is how you are generating the serial number - manually or automatic?
    If you are generating serial number automatic, then it is not possible to generate it considering the basic start date.
    But if you are entering the serial number manually, then there should not be any problem as system will accept that serial number which you enter at the time of conversion of planned order to production order.
    Regards
    Amit parkhi

  • No prod.order created after setting creation flag in APO

    Hi all,
    I'm encountering a new problem. I created a material, and some data adjacent to it (planned order, prod. order, planned ind. rep., various stocks, a routing and various BOMs) in ECC 6.0, which I successfully CIF-fed to APO 5.0.
    When I modify the quantity of the prod. order in the prod.view in APO everthing works out just fine, i.e. the modification is taken over in ECC, BUT when I set the conversion flag in order to create a production order in ECC triggered from APO... absolutely nothing happens.
    I get no error-message (only planning result successfully saved). When I try to remove the conv. flag again, the system says that it's not possible.
    Any ideas what could be the problem?
    Thanks in advance!
    Regards, Bobby

    Hi y'all,
    as an add-on-information to the previously written:
    if a planned order exists in R/3 and is CIF-fed afterwards the conversion works fine (i.e. the planned ord. is converted to a prod. order in R/3 and the prod.ord.number is made known to APO).
    In case the production order has yet to be created, the whole process is stuck!
    Anybody help, please!
    Regards,
    Bobby

  • Can we reverse the status of the planned/prod order with ATP check

    Dear all,
    i ahve 1 query. When in the product view, if u select any planned order/prod order, and click on ATP check.
    if the quantity is confiremd, then the stutus of the orde change to checked and confirmed.
    i want to know can we change this status. can we reverse this status.??
    let me know ASAP. if yes plz explain in deatils
    Regards
    Pravin Mukkawar

    hi Praveen
    You can reverse/change the status of a Planned Order if it shows "checked and fully confirmed/partially confirmed" in
    /sapapo/rrp4( process receipts).
    To do this, enter your location product and run the transaction. be sure you are in change mode.you will get a list of planned orders.select your planned order and select the "pegging structue conversion" push button. then in the next screen select the valid line and push the "delete ATP status" button.
    refresh product view and you can see the new status "Not Checked" for your product.
    Hope this helps you.
    Regards
    Mohan V R Chunchu

  • Link between Prod Order and Sale Order schedule line

    Dear all,
    Ours is a MTO (81).
    In Scheduling Agreement / Sale Order , there are multiple schedule lines for a single item .
    Production Orders are generated for every schedule line of the Item.
    The client wants to know (for a custom developed report) , against which schedule line of the Sched Agreement/ Sale Order, the Production Order is generated ?
    This Information can be seen in MD04.But  I am not able to fetch from the tables .
    The schedule line field (KDEIN ) is not updated in AFPO table & the order no (AUFNR) is not updated in VBEP table .
    Say,
    Sale Doc No : 42000506
    Schedule line/Dely date            Order qty          Prod Order No
    06.10.09                                    500kg               100170
    15.10.09                                    300kg               100171
    Pls give your valuable inputs.
    Regards,
    Sheik

    Hi,
    Only Sales Order No & Sales Order Item No is updated in the table.
    Whereas , I want to know the Sales Order Schedule Line no.
    Regards,
    Sheiki

  • Creation of production order from manual or conversion from Planned Order

    Hello Guru,
    i would like to know why does the production finish date differ when we do manual and conversion of planned order into a production order?
    Thanks

    Ryan,
    When a planned order is created it just uses the Inhouse production time defined to derive the dates, whereas incase of production orders, it would try to schedule the operation and based on that the scheduled dates are derived. The other possibility is the different scheduling types are used for Planned order and Production order. Check transaction OPU5 and OPU3
    Regards,
    Prasobh

  • Material staging indicator not populating in prod order WM pick list item

    Hello,
    I have an issue with material staging in an prod order
    1) PP-WM interface is activated
    2) Control cycle for material is created
    3) Production storage location is created for material
    4) storage type is 100 for production
    5) There is one discontinued material and also the follow up material
    6) stock of discontinued material is zero and requirement are passed to follow up material
    When we confirm the order the stagging indicator for both follow up material as well as discontinued material automatically populates zero (Non relevence to pick list items) where as it should be one (1 - for pick list items).
    One more issue user has manually inserted discontinued material as well as follow up material in production order change mode.
    In the BOM of a main material both discontinued as well as follow up material is there with some quantity as a component.
    For the same work center, control cycle , production storage location the indicator is populating.
    These two material (discontinued as well as follow up) are appearing twice in the WM pick list screen where first two line items are OK and populating indicator "1". But in line item last and second last indicator is not there.
    My question is why the stagging indicator is not automatically populating in the production order WM pick list screen in front of components.

    Unfortunately, WM material staging via production orders is not possible
    from the pull list.  Please see the long text of message RMPU 311
    (WM material staging for production order reservation not possible):
    "You cannot carry out a WM material provision for pick parts from
    production order reservations in the pull list". The reasons for this
    are cleary explained in the SAP on-line documentation via the
    following path :
      Logistics -> Logistics Execution -> Warehouse Management Guide ->
      Goods Issue -> Goods Issue for Production Supply ->
      Material Staging for Repetitive Manufacturing
    See the following under the Selection heading :
    The choice of the selection type influences which types of WM material
    staging are supported in the pull list. However, the pick parts can be
    staged via RS headers/planned orders but not with the current BOM
    explosion. The release order parts, on the other hand, can also be
    staged if the current BOM is used for calculating the dependent
    requirements.
    WM material staging via production orders is not possible from the pull
    list.
    I think you may try in CO02 or COR2 for production order or process order.

  • Block creation of multiple prod. order against single sales order in CO08

    Hi All,
    We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
    How to achieve this?
    SmanS

    Hi,
    you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
    Pls revert if you need any further information.

  • Settlement rule SDI in prod order

    Hi,
    I used strategy make to order in my client, when i create prod order the settlement rule is always MAT and want the settlement rule to be SDI to my sales order.
    What should i config to achieve this ? since i tried to change order type dependent parameter and it did not allow (only PP1 and PP2 allowed).
    Please kindly help
    Best regards,
    Freddy Ha

    Hi,
    i tried to change the requirement class for makte to order so the setlement become SD1 in setting for requirement type KE. In the OPJH i still used PP01. and now it work thanx for all off your input.
    Thankx once again.
    Good day,
    Freddy Ha

  • Different batch no in prod order at the time of creation of prod order

    Hi, we need different batch numbers in production order at the time of creation of production order. tried in system, i can able to create only one batch no at the time of creation of order. we need different batch no at the time of order creation and same no should be assigned at the time of GR from prod order. pls advise how to map this.

    Dear,
    Use the Exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create batch for your order. You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement.
    Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
    Refer this thread,
    Re: Batch creation
    Please try and revert back.
    Regards,
    R.Brahmankar

Maybe you are looking for

  • Cursor becomes a question mark and prevents input

    I first entered this in the Mini forum, then realized it had to be a software issue. My cursor arrow changes to a question mark. Odd things are happening. In Firefox and PhotoShop, numerous "Help" windows open. If I try to shut them, I just get more.

  • Restoring photos from my iphone to my iMac

    Unfortunatley i just broke my iphone 5, i was unable to turn the phone back on, so i was wondering how i can restore my pictures from my iphone to my iMac? I tried following the directions on apple's website but they are not working for me. I am runn

  • Can you run CRXIR1 and CRXIR2 on the same machine?

    I have CR XI R1 Developer edition installed on a workstation which I use to maintain imbedded reports in a large system written in VC++ V6, as well as several newer applications written in VB2003.  The IT department issued me a new machine on which i

  • AE CS5.5 can't import RAW image sequence

    Hi all, I'm running a late 2011 imac full spec, with a CS5.5 retail version. If I try to import a RAW (CR2) image sequence I get the following error: After Effects error: Photoshop file format error (-30504) I updated AE and all other relevant softwa

  • Computer comes on automatically every day - how do I stop this?

    I'm asking for help for a friend. She has a G5, with Mac OS X - Version 10.4.1. Even though she shuts the computer down each night, it comes back on by itself each morning, playing music. She'd like to turn this off, particularly as she is often away