COPA document with missing values

Hi Experts,
after posting in SD (debit memo rebilling) a CO-PA document is created, but with missing value for value field 'interest'. In transaction KE4I, there is correct assignment of SD condition to value field
'interest'. We use cost based CO-PA.
We have tried to Check Value Flow in Billing Document Transfer - transaction KEAT and also to Simulate billing document transfer with KE4ST, but in these transactions everything seems correct.
Can you please write any other reconcilliation reports I can try for this?
Which customizing do I have to check?
Are there any OSS notes for this problem?
Thank you very much for your help,
Michal

Hi,
The problem was solved using OSS note 20254.
Best regards,
Michal

Similar Messages

  • Deleting  rows with missing values in field in start routine of update rule

    Hello experts,
    how can I delet rows with missing values in a specific field in the start routine of update rules?
    I think ABAP code should look something like this:
    delete ...  from DATA_PACKAGE where Z_NO = ''.
    thanks in advance for any suggestions!
    hiza

    Write:
    delete data_package where field = value.
    Hope it helps.
    Regards

  • ERS generated document with zero value for SES

    Hi,
    I have maintained service entry sheet.
    Accounting entry is generated.
    When I run T code MRRL, it has generated document with zero value.
    This is not a free goods PO.
    Why this is happening?
    Please guide on this issue.
    Regards,
    Piyush

    Hi,
    Creating an ERS zero document is an expected system behavior ,you           
    could create an ERS zero document by doing the following wrong           
    procedure:                                                                               
    1. Create PO with ERS falg ON.                                           
    2. Perform GR for PO.                                                    
    3. Create the invoice by MIRO.(Not MRRL).                                
    4. Run MRRL (LIV-ERS).                                                                               
    For every purchase order with flag 'ERS' a table entry is generated.     
    If a goods receipt is posted, this GR should be invoiced via ERS         
    (Tr. MRRL). Manually posted invoices should be avoided, because          
    the table entry will not be deleted. A new invoice receipt must be       
    created while running ERS (but with amount and quantity zero and without 
    FI documents) in order to give a message to the vendor because he        
    has sent you an invoice by mistake.                                      
    Could you please check also the note:1069215
    Best regards
    Erika

  • COPA document with out customer

    Dear All,
    Our AR Team clears small differnces through reason codes which posts the amount automatically to the account 310011 (Sales Credits & Allowances-revenue cost element) but while posting this they are not entering the customer number manually in profitable segment which resulting in the creation of COPA document with amount but with out customer number.
    Is there any way we can automatically determine the customer number in the profitable segment while clearing the customer open items through reason code ?
    I would greatly appreciate respnses.
    Thanks,
    Ram

    Hi Ram
    Refer note 137552.. It populates Customer no in te discount line item... See if this helps you
    This note uses exit COPA0005.. You can write your own code in COPA0005 incase this note does not help
    br, Ajay M

  • COPA document generated , but value field 'Revenue' was missing.

    Hi COPA-Experts:
    I got a problem when tranferring 'Billing document to COPA'.
    COPA document was generated but some value fields missing, like 'Revenue'
    i checked it by T-code 'KE4ST'(simulate), everything is OK in that session.
    then I checked the pricing procedure, the price condition type was assigned by 'KE4I'
    Cost element was also checked , revenue account have a CE category '11',
    ULINE
    when i changed 'account assignment group' in Material Master,
    (by VKOA, another G/L account assigned to account assignment group )
    everything was OK  both in COPA and simulating.
    so i guess,  account assignment group(material) is revelant to COPA value fields?
    how did it do that?

    Resolved.
    Other one had written some code in user exit (SMOD "COPA0002"),
    update some value fields by account assignment group for material.
    then the user exit was assigned in KE4U.
    so , that's the answer

  • Extra accouning line item in billing document with zero value

    Hi,
    I am using TAXINN procedure, the following accounting document has been generated during billing.This accounting document contains an extra line item with zero value.
    However, There is no necessary for this line item with zero value. Can you tell me how to remove this line item?
    000       50          VAT Payable                       A0             0.00
    001       01          Sale within state                 A0      1,212.00
    002       50          Sales f/goods-Dome.          A0      1,000.00-
    003       50          ED Collected Clr.                 A0          160.00-
    004       50          ED Collected Clr.                 A0              3.00-
    005       50          ED Collected Clr.                 A0              2.00-
    006       50         VAT Payable                      A0            47.00-
    Thanks,
    Kanhu

    Hi
    Check if there is any summarization active for billing documents generated through SD. The path for the same is:
    IMG>Financial Acxounting>General Ledger Accounting>Integration>Sales & distribution
    Check for table VBRK
    Regards
    Sanil  K Bhandari

  • COPA Document with different exchange rate

    Hi
    We have created a Sales Order in 2007.
    Now in 2008 we have raised credit request for this order. The accounting doc generated correctly and currency translated as per the exchange rate maintained in the table as on today.
    But the copa document generated with the exchange rate of 2007.
    Can you please let us know is it the correcy way of behaviour or the COPA doc also should generate with current date exchange rate.
    Thanks and Regards
    RS

    Hi Ram
    Thanks for your reply.
    This is my scenario.
    The company code currency is THB.
    The second local cuurency is USD.
    The Operating currency is USD.
    Reporting Currency is USD.
    We have created a Sales order in December 2007 for currency THB. The billing document and accounting document also generated in the same year. The exchange rates are picked correctly as per the exchange rate table.
    The exchange rate is @42. The COPA document also created with exchange rate @42.
    Now in the month of January a credit note created against the order. The accounting doc generated @32 as per the exchange rate tables. But the COPA document generated with exchange rate @42.
    This is happening only for the credit notes.
    Can you please let us know is this standard behaviour or something wrong with customization.
    Best Regards
    RS

  • Multiplot graph with missing values fills them with zero instead of NaN

    I have a waveform graph with multiple arrays (2D) which has different numbers of points in each array.  LabVIEW finds the array with the most points and then plots all arrays with that many points.  It assigns the missing points a value of zero and displays those zero values.  This means arrays with fewer points than the maximum will have values of zero appear in their plots.  This can be avoided by filling in missing points with NaN.  I am acquiring data in a loop and displaying it which requires continuous determination of the number of actual points and filling in of missing points with NaN.  Not difficult, but this could be avoided if LabVIEW would fill missing points with NaN instead of with zero.  Any way to have this happen automatically ?
    Steve
    Attachments:
    Graph MultiPlot Missing Data.vi ‏18 KB

    You can also consider using an XY graph so you don't have to do additional data manipulation. See attached for comparison.
    Attachments:
    Graph MultiPlot Missing Data mod.vi ‏22 KB

  • COPA document generated with Old Plant..

    Hi Team,
    Our Client has migrated from old plant code 1 to new plant code 2.
    When the Internal Oder/WBS settled, two COPA documents were created. One COPA Document with Record type B (Direct postings from FI/MM) with new plant code 1 and another COPA document with Record type C (Project/order settlement) with old plant code 2.
    However, I have gone through the material master, settlement rules and Internal Order/WBS to verify for the plant and it was mentioned with new plant code 2 only, And I dont see the derivation rule for the plant also.,
    Why the COPA document is been created with old plant code instead of new plant. And this issue we are facing with only for Order/WBS settlement for the record type C.
    Please let me know your inputs
    Thanks in Advance
    Edited by: pathurivenki on Feb 12, 2012 8:47 PM

    Hi All,
    To Answer my question above, The COPA Realignment wasn't done after changes to new plants. Whenver the changes has been made at controlling orgn level, the realignment needs to do.
    Closing this thread..
    Thanks,
    Venkat Pathuri

  • Foreign trade--Billing document should not be created with missing data

    Hi,
    We have foreign trade set up. In that we defined incompletion schema at line item level with commodity code and country of origin as "Field ready for input - Incompletion check active".
    Can anybody tell me that, in the above setup,  is it possible to avoid the creation of billing document with missing above data.
    Generally ,  system will go for the accounting status for block with foreign trade data missing.  But our users don't want to create the billing document if the data is missing.
    Can any body suggest us.
    Rajesh.

    Hi Rajesh
    You have to set up a new subroutine or you have to copy the standard subroutine and include the logic that it should read the foreign  trade details at both sales order and delivery levels.you need to assign the subroutine in both  VTFL and VTFA copy controls (header and item levels)
    Another option is you have to go with user exit RV60AFZZ.Please refer this link,hope it should solve your problem
    http://forums.sdn.sap.com/thread.jspa?threadID=1361141&tstart=3735
    Regards
    Srinath

  • COPA document correction

    Hi All,
    is there any way to change the COPA document amount that already posted in the system? plz help me if any body done this previously.
    for EX: we created the billing document and with that billing COPA document also generated means the amount already posted to various value fields at COPA side.
    but the amount posted to one value field is wrong that supposed to be zero amount. i mean the values is posted 300 INR instead of 0.
    now my question is :  is there any way to change the value field amount at COPA side manually or in any other way.
    is there any SAP notes or any other ways to do correction for COPA document.
    would appreciate ur quick reply.
    thanks alot.
    Sandhya Reddy.

    font:Verdana}
    Dear Sandhya,
    You need not panic over this wrong posting. As said, you can post the reversal entry though KE21N, if you need to set right only the PA Document. Pick up all Characteristics values in the COPA document and the values with negative value, then test it by entering in your testing client. You can see the nullifying effect in KE24. Since this is updation of transactional data, it is better to get the approval of the user through UAT in quality before proceeding to Production Client.
    Trust this answers to your query and helps much in resolving your problem!
    Regards,
    Ashok SINGH

  • JS - Center Selection to Artboard / New Document with certain Artboard size

    TL;DR:
    how do I center my current selection to the artboard?
    just like hitting the "horizontal align-center" and "vertical align-center" buttons.
    Hi,
    I've been searching for the last two hours and before my head hits the keyboard I wanted to ask you for help.
    What I'm struggling with:
    in my init function i create a new document and then copy all layers from the previous document step by step to the new document and then save it as SVG.
    // Init
    (function(){
              destination = Folder.selectDialog('Select folder for SVG files.', docPath);
              if (!destination){return;}
              holderDoc = app.documents.add();
              stepThroughAndExportLayers(docRef.layers);
    my problem is that holderDoc = app.documents.add(); always creates a document that is not the same size as my initial document where the layers get copied from.
    so I want the exact same artboard size as in my initial document.
    I'm fine with either doing it as fixed values or taking directly the values of the inital doc.
    i tried this in the segment where I create the new document:
    // Init
    (function(){
      destination = Folder.selectDialog('Select folder for SVG files.', docPath);
      if (!destination){return;}
      holderDoc = app.documents.add();
      holderDoc.artboards[0].artboardRect = [0,0,128,128];
      stepThroughAndExportLayers(docRef.layers);
    and get this error message:
    "Error 1200: an Illustrator error occured: 1346458189 ('PARM')
    Line: 83
    -> holderDoc.artboards[0].artboardRect = [0,0,128,128];"
    which from what I've read on the web means that illustrator doesnt know what document to pick. but i have called it directly. so what could be the issue?
    to clearify: I do not want to fit the artboard to the images/layer. the artboard should always have a certain size. (for me 128px by 128px)
    I would highly appreciate you helping me with either fixing my approach or propose a completely new one.
    Thanks so much in advance.
    // edit: workaround
    (function(){
              destination = Folder.selectDialog('Select folder for SVG files.', docPath);
              if (!destination){return;}
              var activeArtboard = app.activeDocument.artboards[app.activeDocument.artboards.getActiveArtboardIndex()];
              var ABRect = activeArtboard.artboardRect;
              holderDoc = app.documents.add();
              holderDoc.artboards.add(ABRect);
              holderDoc.artboards.remove(0);
              holderDoc.artboards.setActiveArtboardIndex(0);
              //stepThroughAndExportLayers(docRef.layers);
    i now added a new artboard to the new document with the same size as the artboard on the initial document.
    i remove the predefined artboard on the new doc and set the new artboard as active.
    BUT!
    the artboard is now not centered into the window. which lets illustrator place my image with ctrl+c -> ctrl+v somewhere outside the artboard.
    i now need to align my selection to the center of the artboard. but i cant find any reference on how to center a selection to the artboard.

    yes of course. i never modify the author's comments in original scripts.
    but I wont post the script anywhere when it doesnt work anyway haha.
    this is what I've done now:
    // Init
    (function(){
              destination = Folder.selectDialog('Select folder for SVG files.', docPath);
              if (!destination){return;}
              var activeArtboard = app.activeDocument.artboards[app.activeDocument.artboards.getActiveArtboardIndex()];
              var ABRect = activeArtboard.artboardRect;
              // create new document with same artboard as original
              holderDoc = app.documents.add(DocumentColorSpace.RGB, new UnitValue ((Math.abs(ABRect[0]-ABRect[2])), "px"), new UnitValue ((Math.abs(ABRect[0]-ABRect[2])), "px"));
              stepThroughAndExportLayers(docRef.layers);
    in order to create the new document with the same dimensions as my orignal doc, I first read the artboardRect dimensions of the current artboard and then create the document with those values passed as parameters. the calculation is to get the real width since artboardRect gives you left,top,right,bottom values and not just height and width.
    this only works for square formats though. to make it properly you'd have to change the second "new UnitValue" to use the top and bottom values of artboardRect but I currently dont need to do so.
    * Layers to SVG - layers_export.jsx
    * @version 0.1
    * Improved PageItem selection, which fixed centering
    * @author Anton Ball
    * Exports all layers to SVG Files
    * I didn't want every layer in the SVG file so it first creates a new document
    * and one by one copies each layer to that new document while exporting it out
    * as an SVG.
    * TODO:
    * 1. More of an interface wouldn't hurt. Prefix option and progress bar of some description.
    // Variables
    var docRef = app.activeDocument,
              docPath = docRef.path,
              ignoreHidden = true,
              svgExportOptions = (function(){
                        var options = new ExportOptionsSVG();
                        options.fontSubsetting = SVGFontSubsetting.GLYPHSUSED;
                        options.embedRasterImages = true;
                        options.fontType = SVGFontType.OUTLINEFONT;
                        return options;
              destination, holderDoc;
    // Functions
    var stepThroughAndExportLayers = function(layers){
              var layer,
                        numLayers = layers.length;
              for (var i = 0; i < numLayers; i += 1){
                        layer = layers[i];
                        if (ignoreHidden && !layer.visible){continue;}
                        copyLayerTo(layer, holderDoc);
                        // Resize the artboard to the object
                        selectAll(holderDoc);
                        exportAsSVG(validateLayerName(layer.name, '-'), holderDoc);
                        // Remove everything
                        holderDoc.activeLayer.pageItems.removeAll();
              holderDoc.close(SaveOptions.DONOTSAVECHANGES);
    // Copies the layer to the doc
    copyLayerTo = function(layer, doc){
              var pageItem,
                        numPageItems = layer.pageItems.length;
              for (var i = 0; i < numPageItems; i++){
                        pageItem = layer.pageItems[i];
                        pageItem.duplicate(holderDoc.activeLayer, ElementPlacement.PLACEATEND);
    // Selects all PageItems in the doc
    selectAll = function(doc){
              var pageItems = doc.pageItems,
                        numPageItems = doc.pageItems.length;
              for (var i = 0; i < numPageItems; i += 1){
                        pageItems[i].selected = true;
    // Exports the doc to the destination saving it as name
    exportAsSVG = function(name, doc){
              var file = new File(destination + '/' + name + '.svg');
              holderDoc.exportFile(file, ExportType.SVG, svgExportOptions);
    // Makes sure the name is lowercase and no spaces
    validateLayerName = function(value, separator){
              separator = separator || '_';
              //return value.toLowerCase().replace(/\s/, separator);
              return value.replace(/\s/, separator);
    // Init
    (function(){
              destination = Folder.selectDialog('Select folder for SVG files.', docPath);
              if (!destination){return;}
              var activeArtboard = app.activeDocument.artboards[app.activeDocument.artboards.getActiveArtboardIndex()];
              var ABRect = activeArtboard.artboardRect;
              // create new document with same artboard as original
              holderDoc = app.documents.add(DocumentColorSpace.RGB, new UnitValue ((Math.abs(ABRect[0]-ABRect[2])), "px"), new UnitValue ((Math.abs(ABRect[0]-ABRect[2])), "px"));
              stepThroughAndExportLayers(docRef.layers);

  • ERS generated document with zero vaue for SES

    Hi,
    I have maintained service entry sheet.
    Accounting entry is generated.
    When I run T code MRRL, it has generated document with zero value.
    This is not a free goods PO.
    Please guide on this issue.
    Regards,
    Piyush

    Repeated by mistake

  • Reconciling open GRPO documents with GL

    Has anyone reports or methods to reconcile the value of open GRPO documents with the value in the general ledger GRNI account?
    I've always found the lack of a report a big limitation. The obvious problem is that the open GRPO documents might be Service or have non-stock Items, neither of which affect the GL.
    I've asked similar questions before but not really got anywhere. I'm hoping that someone's got something new.
    Regards,
    Douglas

    I  am trying to tell users how they can reconcile open GRPOs with the GL balance for GRNI. This would be something that they would do routinely, say every month, so it's not just a one-time exercise. (I am using the word reconcile in this sense to mean compare to or check against. I don't mean Business One's Internal Reconciliation function.)
    This is very similar to what an accountant would do to reconcile (compare) the Debtors (Sales) to the GL. The accountant would run an Aged Debtors report to see the open balance on the debtors (customer) documents then compare that to the balance on the Debtors Control Account in the general ledger. For Debtors, you would expect that they would be exactly the same.
    The problem with GRPOs, as you know, is that not all the values on the GRPOs go onto the GL. So the question is, how can you reconcile the two, i.e check one against the other?
    For me, this is a big omission in the way that Business One works, and I keep hoping that someone has come up with a technique. We keep getting asked this question by users.
    Regards,
    Douglas

  • Can you add People Picker with multiple values to Word Document using Quick Parts?

    Hi all, I've been trying to develop a form in Word that takes a bunch of metadata from the SharePoint library. Most of it works okay, but when I try to add any fields that have been set up to take multiple entries in a people picker, they don't show up
    in the add quick parts list. Any ideas, or is this a limitation?

    Hi NREL,
    According to your description, my understanding is that the people picker column with multiple values was missing in Word Quick Parts.
    This is by design that we are unable to use the fields which is allowed multiple selections.
    As a workaround, you can use a text field(Single line of text) to store the multiple values of the people column. When you create a document, start a workflow to update the text field using the values of the people column, then use the
     text field in Word Quick Parts.
    You can do as the followings:
    Open your library, and create a new column using Single line of text.
    Open your site with SharePoint 2010 Designer, create a workflow based on your library.
    Add the action “Set Field in CurrenItem”, and set it like the screenshot.
    Set the Start Options is “Start workflow automatically when an item is created”.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

Maybe you are looking for