Copy and replace sequences

Hi!
I have a running sequence containing a main loop. Depending on input from user, a given subsequence (in separate file) is called and when it has executed we go back to the main file. From the main loop I have made it possible to run a batch file that copies the whole set of sequence files from a network drive to the local folder.
Problem: The files seem to not always update, meaning when one certain sub file is called it is still unchanged although the network master was edited and saved. All the sequences are set to unload after execution.
Ideas?
/Stefan

Hello!
When programming with the ActiveX API in TestStand you can get object references to the sequence file, sequence, steps, execution and so on that is executing at the moment. By using these references you can close the open sequence file and the re-load them the ordinary way.
One of the methods you can use is: SequenceFile.UnloadModules
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

Similar Messages

  • Question to CAD Desktop - Feature Copy and Replace

    Hello,
    I want two use the feature "copy and replace" in CAD Desktop to copy and replace the document info set with a new one but also change its document info set type.
    Is that in general possible, how to customize it?
    Kind regards,
    Axel Tackenberg

    Hi,
    here the link to the docu:
    http://help.sap.com/erp2005_ehp_04/helpdata/en/ea/56e93ba948ca1ee10000000a114084/frameset.htm -> Processing of doscuments - > Copy and Replace.
    Best regards,
    Martin

  • How to copy and replace new Mountain Lion hard drive with old Snow Leopard drive?

    So far I have not found an answer to my question, so I am hoping that this is feasible.
    A while ago I purchased a used 2010 Macbook Pro running Snow Leopard that did not have the installer disc. A week ago the hardware died on me, so I replaced it with a new 2012 Macbook Pro running Mountain Lion.
    The problem is that I purchased a 1 TB aftermarket HD for my old Macbook Pro and want to replace the current smaller hard drive in my new computer with it. I've already run Time Machine and put all of my data in my new computer so I figured that it would be possible to simply copy that disk image back over to my old drive and replace it. However the computer showed that they weren't compatible. When I tried to put my old hard drive in my new computer there was not a bootable OSX available.
    Since Mountain Lion already came on my new computer I do not have an installer that I can use.
    Is there anyway I can copy the current Mountain Lion information from my new hard drive and basically have a fully functioning, bootable copy on my old hard drive that I can put back into my new computer?
    Thank you.

    Well, if you put the HDD from the old Mac into an external enclosure you can use a tool like Carbon Copy Cloner or SuperDuper! to clone the Mountain Lion installation onto the 1TB drive.  If you go this route, I would suggest you consider using CCC as it does have the option to clone the Repair Partition as well as the boot volume.
    Another route you could take would be to put the 1TB drive into the new MBP, and then boot to the Internet Recover .  From there you can re-partition the drive and install Mountain Lion clean on the 1TB drive.  During the installation process, you will have the option to use the Migration Assistant to migrate your data & apps.  You can use your Time Machine backup for that, or if you have the original drive in an enclosure, you can migrate directly from the external drive.  I have used this latter method myself a few times.

  • Third party utility to allow "copy-and-merge" instead of "copy-and-replace"

    I'm looking for a utility that can allow me to copy folders and files over existing ones, and have them merge instead of replacing everything. Where can I find one?

    You can use FileMerge:
    install the Developer tools from the Leopard DVD,
    then go to this folder:
    /Developer/Applications/Utilities

  • Ricoh reader-SDHC for backup-cannot do copy and replace

    I have used the Ricoh reader to back up my data partition by drag-and-drop copy to Transcend SDHC card. When I try to use drag-and-drop copy again to copy the updated data partition I get the message that there is not sufficient free space. But when I use this procedure on an external USB HDD I do not have that problem--Windows simply copies over the old file on the external HDD. Why does this not work with SDHC card in the Ricoh reader? Also, with this Class 10 SDHC card the initial backup took ages! Please advise, as I really want to use SDHC in the Ricoh reader as a backup medium.

    Aryeh: I have been thinking you are probably right re lack of sufficient free space on the SDHC, such that Windows would "see" enough free room on the target drive already containing 13gb of backup data for all the info to be copied from the source drive using the copy command. I am guessing that the target drive format (NTFS vs FAT32 vs exFAT is not the problem that has prevented me from using the copy command with my 16gb SDHC. So I am going to try to do the backup of 13gb data instead with a 32gb SDHC, which would provide more than enough free space once it is populated with an initial backup comprising about 13gb of data. Will post the outcome here.

  • Copy and Past Nested Sequence loses link to Master

    Has anyone else noticed this problem? I've got a nested sequence that I'm cutting and editing around and most of the time everything is fine. If I doubleclick the nested sequence in my main sequence, it opens the nested one and if I then double click the nested sequence in my Browser, it goes to that same sequence. Changed in one will show up in the other.
    BUT, if I copy and paste the nested sequence in my main sequence, the new pasted version will open a NEW sequence that isnt linked to the Master in my Browser. So now, changes in the new nested sequence or the Master dont show up in the other one.
    Is this just me thats having this problem?

    I can see where you are coming from, and where the engineers at Apple were coming from, but I strongly disagree with this behavior. In my opinion, if you want to have a separate copy of a sequence, you should make a copy in your bin and bring that in. That way your new sequence HAS a master sequence and you can CHANGE the name, both of which help to avoid confusion.
    So, maybe you're right and most people prefer it the way that it is, but let me explain the workflow I'm using and you'll see why this is so absolutely frustrating to me.
    I'm editing a documentary in Chinese and as I dont speak Chinese, I've had it all translated, and added subtitles to the interview footage so I can edit it. And to make absolutely sure that the subtitles and footage stay in sync (since I wouldnt know it if they werent) I've put all the footage into separate sequences and I'm editing those sequences as if they are raw footage.
    And due to this, I'm throwing sequences around every which way while I try to create my story. And sometimes that means copying a series of edits into a new timeline to work on separately from the larger project. And as I see it, there is NO WAY to do that currently and keep the sequences linked to the masters, other than pulling up each master sequence into the Viewer, changing the in and out points to match the clip I want and Inserting it into a new timeline. And when you want to copy over a segment that has perhaps 20 edited bits, thats WAY too much trouble.
    So I'll admit that I'm editing in a somewhat abnormal way due to my subtitles, but as there is no way to copy and paste sequences and keep the link to the Master, I think the behavior is broken.
    Oh, and the "Tools->Create Master Clips" command, which is supposed to relink clips to their masters if there are any in the Browser, doesnt work for Nested Sequences.

  • How do I find and replace recurring images?

    I was wondering if I could find and replace recurring thumbnails in a document. I actually want to delete the specific thumbnail in mass.

    Then Paste and Match Style option shift command v to remove the graphics.
    It is under the Edit menu of most OSX apps.
    There are also utilities that remove all styles and other formatting automatically for you when you do a simple copy and replace.
    Peter
    PS The Pages09_UserGuide.pdf is available from under the Help Menu.

  • Copy and paste journal remarks

    Hi all
    What is the shortcut to copy and paste a certain word in journal entry remarks to all rows without affecting other words in the same remarks
    like excel Find copy and replace all function?
    Kedalene Chong

    Hi
    you can use the replace function of SQL
    update JDT1 set LineMemo=REPLACE(LineMemo,'From Word','To Word')
    shachar

  • I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

    I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

    You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

  • Upon opening a sequence some of the footage is missing and replaced

    Strange things here.
    Been working on a project for a couple of weeks with no problems. Now I go to open it and a few of the files are missing and have the extension on the timeline of MC2 rather than MVI. They also have diagonal lines thru the timeline boxes. A  few of them have different footage in place of the original files. I can't seem to figure this out. The files are on the drives. I did look. The other odd thing is the audio for the tracks is still there. Just the video is wacked on these.
    Clues??
    Thank you ahead.
    David

    Yes everything has been on the drive and the files were there yesterday. I think I found what the MC1 or MC2 is. I did a multicam sequence as well with this other sequence. I believe I copy and pasted from the multicam sequence to my new sequence a few of these files. Hmmm. But how would that expain this. I did go back to my multicam sequence and it is missing the same parts as well but I can go to the original files and drag and drop them back into place just fine so they are on the drive but miss located by Premier project file? I did do an update yesterday from adobe for premier and it knocked my gtx 560ti card out of mercury so I had to redo the unlock today.

  • Render and Replace Different Format In Same Sequence

    Is there any way to keep the Interpret Footage settings after make Render and Replace option?
    I have a sequence setting in 1080 50p with two different formats  50p 720 (interpret in 25p) / 1080 25p, I did a render and replace of the total. And the result was that the rendered footage doesn´t  respect me the interpret settings.
    Thanks.

    Render and Replace is currently designed to transcode the clip and keep the Interpret Footage settings applied to the clip (not burned/rendered in). There is a feature request to burn/render in Interpret Footage (and other effects) to the transcoded clip.
    Not ideal, but a possible workaround would be to export the clips with "Import into project" selected in Export Settings, then Replace with Clip to get your desired outcome.

  • Copy and paste clips to anamorphic sequence...having trouble

    I captured all my broll DV/DVCPRO NTSC Anamorphic. I started editing on a sequence that was not checked for anamorphic under Sequence Settings.
    In order to fix this, I created a new sequence with the anamorphic box checked and copied all of my edits from the previous sequence. Now it seems like the anamorphic has been applied twice, like it seems widescreen twice over.
    I was wondering if it were possible to copy my edits from the wrong sequence and paste them into the sequence with right settings, while keeping the correct anamorphic view. If not, then it seems I would have to redo all my edits on the correct sequence.
    Thanks in advance,
    Jeff

    Jeff, when you copied and pasted your edits then those clips retained all previously applied settings, filters etc, including those distortions automatically applied by FCP that made your anamorphic clips display properly in the older non-anamorphic sequence .. what you need to do is to remove those distortions:
    Select all the clips in the new timeline (Cmd-A) then invoke the Remove Attributes dialog (Cmd-Opt-V) and put a tick in the Distort checkbox, then click OK.
    That should do it ... although if you did any intentional distortions then those will have to be redone as they will be removed along with the automatic anamorphic distortion.
    Cheers
    Andy

  • Cannot Copy/Paste into Find and Replace

    Help! I used to be able to do this, but now I cannot seem to
    copy/paste source code into the Find and Replace dialog box. I am
    stumped as to why this is a problem. I am running Dreamweaver MX
    2004 (educational version). I would appreciate any help!!!

    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=dd550772
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "sabina" <[email protected]> wrote in
    message
    news:eqimpu$f9j$[email protected]..
    > Help! I used to be able to do this, but now I cannot
    seem to copy/paste
    > source
    > code into the Find and Replace dialog box. I am stumped
    as to why this is
    > a
    > problem. I am running Dreamweaver MX 2004 (educational
    version). I would
    > appreciate any help!!!
    >

  • Is it possible to retrieve a registration key for a hard copy of iWork 06? Moved and cannot locate disc, and replaced the computer it was originally installed on. When I transferred the program to new Macbook, the reg key apparently didn't transfer.

    Is it possible to retrieve a registration key for a hard copy of iWork 06? Moved and cannot locate disc, and replaced the computer it was originally installed on. When I transferred the iWork from original Macbook Pro to new Macbook Pro, the reg key apparently didn't transfer. Any ideas?

    Do you still have access to the old MacBook Pro? If so, you can transfer the license by copying the com.apple.iwork.plist from Macintosh HD > Library > Preferences to the same location on the new Mac. Note that this IS the main HD Library, not your user library. I have found that these files are not moved during setup or migration.
    Are you really running Tiger 10.4.7? If so, you should update to 10.4.11. You can find the updater here. You also might consider buying the retail disk of iWork '09 from a third-party such as Amazon.com or eBay. It will add a lot of features for you. iWork '09 does require Tiger 10.4.11 at a minimum.

  • Copy and paste action sequence?

    i have an action sequence set to play on application start, but i also want to set it up to play whenever a user navigates to that specific page

    Hello.
    You can't copy-and-paste action sequences yet.
    But you can if you were to open it in Flash Builder, but this would require a lot of 'fiddling about' with.

Maybe you are looking for