Core-1 and Core-2 study materials question

first let me start by apologizing if i am posting this in the wrong section, I'm pretty new here. I am enrolled to take the labview core-1 and core-2 classes at a training center in Ft Wayne Indiana in February. I am having surgery tomorrow on my foot so I will be off of work and laid up for a few weeks, so I was wondering if there were any good study materials i could start using to help gain some knowledge before attending the classes. I play with labview a bit, but not knowing much I'm limited on what i understand while "playing" with it. i have found this forum to be great for finding information, but not having any official training most of the stuff i find in the forums is still over my head. i do intend on continuing my education in labview and going for the CLAD certification when i get to that point and feel ready to take the exam. can anyone help guide me in a good direction to start gaining knowledge that will help me along in my journey in learning this amazing world of labview? thanks in advance for any help you can offer. again, i apologize if I am posting this in the wrong section.

3 Hour Introduction
6 Hour Introduction
LabVEW Basics
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Learning NI
Getting Started with NI Products
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

LabVIEW Core 1 and Core 2 training effectiveness

I'm scheduled to take LabVIEW core 1 and core 2 training in the second week of October. I would like to get an idea on how effective this training is, and how to approach it.
I work in a test and measurement lab and we use LabVIEW to automate our testing (RF, EMI/EMC). We currently have some labVIEW programs up but no one to maintain/upgrade or design new processes and I am planning to step into this role. Is it feasible to expect to jump right in after the training?
Thank you.

Jeff·Þ·Bohrer wrote:
Core I and Core II will teach you the fundamentals of what LabVIEW does. (And some very valuable skills)
It will not teach you how to architect a robust framework for test. That's something you will need to learn to step into a Lead Developer role.
It will not "Give" you a source code control repository. That's something your boss will need to provide to keep your work product safe.
It will not provide mastery of best methods and practices with a thourough knowledge of the intracacies of programming in LabVIEW for yor companies needs. BUT, you found the forums.....come back often! You'll learn more here by accident than you might imagine!
I found Core 1 and 2 to be very nice affirmations of what I have learned here!
I would highly recommend taking this tutorial in advance, so it won't be totally alien to you when you start the training. It's better to start out with some questions and some answers, than no questions or answers.
Post-training, I would recommend Bloomy's LabVIEW Style Book. You don't have to get the latest, greatest edition - most of the guidance there is timeless.
[edit]
LOL it would appear that I am responding the wrong post. I assume Jeff has advanced LabVIEW knowledge.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Java Development issue/differences between Core Duo and Core 2 Duo (??)

Hi Everyone,
I am a Java developer that uses my 17" MBP Core Duo for all of my development. Lately, I've been trying to use both the Glassfish Application Server V2 (from Sun) and Maven 2.09 from the Apache project. I have configured identical scenarios on my MBP Core Duo and on a 15" MBP Core 2 Duo.
The scenario involves compiling and running some webservices (at least on the Core 2 Duo) in a local development environment. Both machines use the default JDK 1.5.0_13 installed on the machine.
On the 17" Core Duo, issuing a "mvn install" command produces the following error:
[INFO] Compiling 1 source file to /Users/john/downloads/soabook-code-20070504/chap07/endpoint-provider/modules/en dpoint/target/classes
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD ERROR
[INFO] ------------------------------------------------------------------------
[INFO] Fatal error compiling
Embedded error: Prohibited package name: java.lang
[INFO] ------------------------------------------------------------------------
[INFO] For more information, run Maven with the -e switch
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 12 seconds
[INFO] Finished at: Fri Sep 05 07:09:06 CDT 2008
[INFO] Final Memory: 9M/17M
[INFO] ------------------------------------------------------------------------
Running Maven with the "-e" switch turned on produces the following stacktrace:
org.apache.maven.lifecycle.LifecycleExecutionException: Fatal error compiling
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecyc leExecutor.java:564)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle(De faultLifecycleExecutor.java:480)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycl eExecutor.java:459)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailure s(DefaultLifecycleExecutor.java:311)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(Default LifecycleExecutor.java:278)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExe cutor.java:143)
at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:334)
at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:125)
at org.apache.maven.cli.MavenCli.main(MavenCli.java:280)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
Caused by: org.apache.maven.plugin.MojoExecutionException: Fatal error compiling
at org.apache.maven.plugin.AbstractCompilerMojo.execute(AbstractCompilerMojo.java: 498)
at org.apache.maven.plugin.CompilerMojo.execute(CompilerMojo.java:114)
at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPluginManager.j ava:443)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecyc leExecutor.java:539)
... 16 more
Caused by: java.lang.SecurityException: Prohibited package name: java.lang
at java.lang.ClassLoader.preDefineClass(ClassLoader.java:534)
at java.lang.ClassLoader.defineClass(ClassLoader.java:669)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at org.codehaus.plexus.compiler.javac.IsolatedClassLoader.loadClass(IsolatedClassL oader.java:56)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:675)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at org.codehaus.plexus.compiler.javac.IsolatedClassLoader.loadClass(IsolatedClassL oader.java:56)
at org.codehaus.plexus.compiler.javac.JavacCompiler.compileInProcess(JavacCompiler .java:398)
at org.codehaus.plexus.compiler.javac.JavacCompiler.compile(JavacCompiler.java:141 )
at org.apache.maven.plugin.AbstractCompilerMojo.execute(AbstractCompilerMojo.java: 493)
However, the exact same software setup on the Core 2 Duo produces this result (which I would expect on the Core Duo):
[INFO] Installing /Users/john/Downloads/soabook-code-20070504/chap07/endpoint-provider/pom.xml to /Users/mjhart/.m2/repository/soabook/chap07-endpoint-provider/1.0/chap07-endpoi nt-provider-1.0.pom
[INFO]
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO] ------------------------------------------------------------------------
[INFO] CHAP07-ENDPOINT-PROVIDER-WSDL2JAVA .................... SUCCESS [1:35.885s]
[INFO] CHAP07-ENDPOINT-PROVIDER-ENDPOINT ..................... SUCCESS [7.221s]
[INFO] CHAP07-ENDPOINT-PROVIDER-CLIENT ....................... SUCCESS [16.525s]
[INFO] CHAP07-ENDPOINT-PROVIDER .............................. SUCCESS [1.597s]
[INFO] ------------------------------------------------------------------------
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESSFUL
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 2 minutes 1 second
[INFO] Finished at: Fri Sep 05 07:07:23 CDT 2008
[INFO] Final Memory: 16M/30M
[INFO] ------------------------------------------------------------------------
I have installed the same software versions and have the same configuration on a Windows desktop running XP SP2 and get the same successful result.
Is this an issue between the Core Duo and Core 2 Duo? I can't see that it is since I don't believe the hardware influences the software to that degree. However, I am at a loss for what is causing the issue and the Apache Maven list insists that there are developers that are using Maven successfully on OS X.
I really need to get past this issue, but I am at a loss. Please help.
Thanks,
John

Have you repaired permissions? (/Applications/Utilities/Disk Utility.app)
Are you sure you're using JDK 5? (Applications/Utilities/Java/Java Preferences.app or output of $ javac -version)
--greg

Core Duo and Core 2 Duo

So, my black 2 ghz Core Duo is in need of a new hard drive. Of which I'm waiting for a warranty replacement.
My wife's white 2.16 Core 2 Duo macbok will be mine for the next week. Will my RAM from the black macbook work in the white macbook? Are they interchangable?
TIA!

All white and black MacBooks come from the factory with PC2-5300 (DDR2 667) memory - more than likely CL=5. They should be interchangeable, but there is the caveat about total memory supported in various versions of the MacBook.
I'm not sure why you'd want to do this unless somehow your Core Duo has more memory than the Core 2 Duo machine. The standard build for the Core Duo MacBooks was 2x256MB, while the standard build for the Core 2 Duo 2.16 was 2x512MB.

Difference between core duo and core 2 duo

I want to upgrade to Leopard starting where ever i need to but I cant figure out how o do it. On some of the discussions it says must have core 2 duo more, my macbook says core duo. Is this the same thing or different? Any advise on how to upgrade would be appreciated. I want to upgrade itunes and cant because i get the message not compatible wit this version of OS X.. Please help

1. As stated above, you need to purchase Snow Leopard on DVD. Don't worry about any intermediate versions.
2. The newest version of iTunes which will run on 10.4.11 is 9.2.1. If you need to upgrade because you purchased a new iPod or similar device, you'll almost certainly need to upgrade your OS too.
(65426)

Please verify core duo vs. core 2 duo speed comparison

Hi,
I was looking for RAM to upgrade my MacBook CoreDuo 512mb to 2gb, and found this:
http://eshop.macsales.com/Reviews/MacBook/Testing/Memory_Benchmarks
If you go down, there is performance comparisons b/t core duo and core 2 duo, and between different size of rams. I am looking at photoshop result. Notice C2D 1gb is FASTER than CD 2gb.
Since I will be using Photo Editing Apps. to process RAW files, speed is my primary concern. Could you please verify this data? If this is true, I am going to consider selling my current MB and getting a new one with C2D.
Thanks!

Performance comparisons vary from tests to tests. And even if you test the same machine 10 times, you will get 10 different results. But from looking at the data, it seems though that the differences are very minute.
Selling your CD MB to get a C2D MB would not be a smart investment for that small improvement in performance, but the decision is up to you. If you decide to upgrade since speed is your primary concern, why not opt for Macbook Pro?

Study materials for Adobe LiveCycle Core ACE

Hi All,
Know it is not a strictly Workbench question, but no category really fits
Adobe has recently developed an Adobe LiveCycle Core ACE exam
http://partners.adobe.com/public/en/ace/ACE_Exam_Guide_LiveCycleEX2_Core.pdf
Thats very exciting and I now want to practice for it and take it. When I read the suggestions for study materials I dont find much help, so I want to hear from others what resources they have used og plan to use? Bring on your clever ideas so we all can improve our skills!
Cheers,
/Thomas Groenbaek

Hi Thomas,
Good question. We are working on putting together a document that will identify different learning vehicles to help meet the different objective areas for the exam. Goal is within the next week to have something ready .... it would be a living document as learning content is always popping up ... docs, whitepapers, demos, training, etc.
In the future, as Adobe releases more Enterprise certification exams this kind of learning map will be available when the exam is announced.
It will be posted to the Adobe site but I will be sure to post here this one time in specific response to your question in the event that the publishing process would cause delays.

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Ask the Expert: Hierarchical Network Design, Includes Core, Distribution, and Access

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about hierarchical network design.
Recommending a network topology is required for meeting a customer's corporate network design needs in their business and technical goals and often consists of many interrelated components. The hierarchical design made this easier like "divide and conquer" the job and develop the design in layers.
Network design experts have developed the hierarchical network design model to help to develop a topology in discrete layers. Each layer can be focused on specific functions, to select the right systems and features for the layer.
A typical hierarchical topology is
A core layer of high-end routers and switches that are optimized for availability and performance.
A distribution layer of routers and switches that implement policies.
An access layer that connects users via lower-end switches and wireless access points.
Ahmad Manzoor is a Senior Pre-Sales Engineer at AGCN, Pakistan. He has more than 10 years of experience in first-rate management, commercial and technical skills in the field of data communication and services lifecycle—from solution design through sales pitch, designing RFPs, architecture, and solution—all with the goal toward winning projects (creating win/win situations) of obsolete solutions. Ahmad also has vast experience in designing end-to-end data centers, from building infrastructure design to data communication and network Infrastructure design. He has worked for several large companies in Pakistan and United Arab Emirates markets; for example, National Engineer, WATEEN Telecom, Emircom, Infotech, Global Solutions, NETS International, Al-Aberah, and AGCN, also known as Getronics, Pakistan.
Remember to use the rating system to let Ahmad know if he has given you an adequate response.
Because of the volume expected during this event, Ahmad might not be able to answer every question. Remember that you can continue the conversation in the Solutions and Architectures under the sub-community Data Center & Virtualization, shortly after the event. This event lasts through August 15, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Dear Leo,
We are discussing the following without any product line, discussing the concept of hierarchical design, which will help you to take decision which model is better for you Two Layer or Three Layer hierarchical model.
Two-Layer Hierarchy
In many networks, you need only two layers to fulfill all of the layer functions—core and aggregation
Only one zone exists within the core, and many zones are in the aggregation layer. Examine each of the layer functions to see where it occurs in a two-layer design:
Traffic forwarding—Ideally, all interzone traffic forwarding occurs in the core. Traffic flows from each zone within the aggregation layer up the hierarchy into the network core and then back down the hierarchy into other aggregation zones.
Aggregation—Aggregation occurs along the core/aggregation layer border, allowing only interzone traffic to pass between the aggregation and core layers. This also provides an edge for traffic engineering services to be deployed along.
Routing policy—Routing policy is deployed along the edge of the core and the aggregation layers, generally as routes are advertised from the aggregation layer into the core.
User attachment—User devices and servers are attached to zones within the aggregation layer. This separation of end devices into the aggregation permits the separation of traffic between traffic through a link and traffic to a link, or device. Typically, it is best not to mix transit and destination traffic in the same area of the network.
Controlling traffic admittance—Traffic admittance control always occurs where user and server devices are attached to the network, which is in the aggregation layer. You can also place traffic admittance controls at the aggregation points exiting from the aggregation layer into the core of the network, but this is not common.
You can see, then, how dividing the network into layers enables you to make each layer specialized and to hide information between the layers. For instance, the traffic admittance policy implemented along the edge of the aggregation layer is entirely hidden from the network core.
You also use the core/aggregation layer edge to hide information about the topology of routing zones from each other, through summarization. Each zone within the aggregation layer should have minimal routing information, possibly just how to make it to the network core through a default route, and no information about the topology of the network core. At the same time, the zones within the aggregation layer should summarize their reachability information into as few routing advertisements as possible at their edge with the core and hide their topology information from the network core.
Three-Layer Hierarchy
A three-layer hierarchy divides these same responsibilities through zones in three vertical network layers,
Traffic Forwarding—As with a two-layer hierarchy, all interzone traffic within a three- layer hierarchy should flow up the hierarchy, through the layers, and back down the hierarchy.
Aggregation—A three-layer hierarchy has two aggregation points:
At the edge of the access layer going into the distribution layer
At the edge of the distribution layer going into the core
At the edge of the access layer, you aggregate traffic in two places: within each access zone and flowing into the distribution layer. In the same way, you aggregate interzone traffic at the distribution layer and traffic leaving the distribution layer toward the network core. The distribution layer and core are ideal places to deploy traffic engineering within a network.
Routing policy—The routing policy is deployed within the distribution layer in a three- layer design and along the distribution/core edge. You can also deploy routing policies along the access/distribution edge, particularly route and topology summarization, to hide information from other zones that are attached to the same distribution layer zone.
User attachment—User devices and servers are attached to zones within the access layer. This separation of end devices into the access layer permits the separation of traffic between traffic through a link and traffic to a link, or device. Typically, you do not want to mix transit and destination traffic in the same area of the network.
Controlling traffic admittance—Traffic admittance control always occurs where user and server devices are attached to the network, which is in the access layer. You can also place traffic admittance controls at the aggregation points along the aggregation/core edge.
As you can see, the concepts that are applied to two- and three-layer designs are similar, but you have more application points in a three-layer design.
Now the confusion takes place in our minds where do we use Two Layer and where the Three layer hierarchical model.
Now we are discussing that How Many Layers to Use in Network Design?
Which network design is better: two layers or three layers? As with almost all things in network design, it all depends. Examine some of the following factors involved in deciding whether to build a two- or three-layer network:
Network geography—Networks that cover a smaller geographic space, such as a single campus or a small number of interconnected campuses, tend to work well as two-layer designs. Networks spanning large geographic areas, such as a country, continent, or even the entire globe, often work better as three layer designs.
Network topology depth—Networks with a compressed, or flattened, topology tend to work better as two-layer hierarchies. For instance, service provider networks cover large geographic areas, but reducing number of hops through the network is critical in providing the services they sell; therefore, they are often built on a two-layer design. Networks with substantial depth in their topologies, however, tend to work better as three-layer designs.
Network topology design—Highly meshed networks, with many requirements for interzone traffic flows, tend to work better as two-layer designs. Simplifying the hierarchy to two levels tends to focus the design elements into meshier zones. Networks that focus traffic flows on well-placed distributed resources, or centralized resources, such as a network with a large number of remote sites connecting to a number of centralized Data Centers, tend to work better as three-layer designs.
Policy implementation—If policies of a network tend to focus on traffic engineering, two-layer designs tend to work better. Networks that attempt to limit access to resources attached to the network and other types of policies tend to work better as three-layer designs.
Again, however, these are simple rules of thumb. No definitive way exists to decide whether a network should have two or three layers. Likewise, you cannot point to a single factor and say, “Because of this, the network we are working on should have three layers instead of two.”
I hope that this helps you to understand the purposes of Two Layer & Three layer Hierarchical Model.
Best regards,
Ahmad Manzoor

HP Pavilion dv7-4083cl (w/ Intel Core i5 and ATI GPU): Which is its normal temperature?

Hello,
I have a question about HP Pavilion dv7-4083cl (w/ Intel Core i5 and ATI GPU):
Which is its normal temperature?
Environment: 24 °C (Celcius)
HWMonitor and Real Temp agrees with the numbers find below.
The two CPU Cores starts at 37 °C and in about an hour are at 53 °C, with CPU usage under 10%.
The GPU starts at 34 °C and easly goes to 57 °C, with some peaks at 72 °C
Regarding "Hewlett-Packard 144B": (under low/idle CPU usage)
TZ01: starts at 40 °C and very fast goes to 55 °C or 65 °C (and more, under CPU load)
PCH starts at 59 °C and very fast goes to 76 °C (and stays there)
GMCH: starts at 40 °C and very fast goes to 55 °C or 65 °C
ATI Mobility Radeon HD 5470 (TMPIN0): Starts at 34 °C and easily goes and stays at 57-58 °C
Note: I'm also using a cooler (two fans, under its base)
If I run Real Temp (v. 3.6) "Sensor Test", the cores goes up to 100 °C , and even a bit more.
Which is the normal / expected behavior / operational range?
Steady PCH at 76 °C is it normal?
TZ01, GMCH at 55 - 65 °C is it normal?
i5 Cores at 55 °C is it normal? (and easily going to 70 °C or more)
GPU (ATI) at 57 °C is it normal?
is it normal to climb up to 100-105 °C under a 5 minutes high CPU usage operation?
Thanks!

i roll back to bios F.25 which is the older version of bios that support my device but still suffering from same D90 system overheating error.
i can't contact hp support or send it to offical hp center currently coz i am from Egypt and i live in far town

Switch configuration urgent help (edge and core)

hi
i have new project in with the bellow product :
20 X WS-C2960-24TC-S
2 X WS-C3750X-48T-S
2 X WS-C2960S-24TS-S
i need to configure this switch in order to work without having vlan, first the 2 core switch for redundancy, then each catalyst switch 2960(edge Switch) connected to the two core with 2 uplink each uplink will be connected to single core switch(i have 2 core switch and i want to configure it in stack mode redundancy)
i need help to configure this switch to work perfectly with each other in best redundancy mode any configuration for this switch will be very helpfull for me
thank you

Hey,
This is a very open question but i believe the document below is a good point to start:
http://www.cisco.com/c/dam/en/us/td/docs/solutions/Enterprise/Small_Enterprise_Design_Profile/chap2sba.pdf
HTH.
Regards,
RS.

Values for net.core.rmem_max and rmem_default

A quick question
On Metalink (notes 419646.1 and 421308.1 to be precise)
the values for installing Oracle 10g on RHEL5/64bit build for net.core.rmem_max and rmem_default is 262144
For RHEL5/x86 the same suggested value is 1048576
Does anyone know why this is so, or is it just an oversight in the docs.
regards

Hi user;
On Metalink (notes 419646.1 and 421308.1 to be precise)
the values for installing Oracle 10g on RHEL5/64bit build for net.core.rmem_max and rmem_default is 262144
For RHEL5/x86 the same suggested value is 1048576
Does anyone know why this is so, or is it just an oversight in the docs.RHEL5/64bit and RHEL5/x86 is 32 bit, soo all arch. are different. Its mean oracle need to run different settings on each version or architect
Hope it helps
Regard
Helios

I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

HELP I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

Use Photoshop menu Help>system Info... use its copy button and paste that info in an append here.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Switches for Access, Distribution, and Core Layer

I have this case study in school and we are tasked to build a network in a school. So we've decided to use the three layer hierarchical model. I'm not sure about what switch is best for these layers but I've decided that I'll use 3750 for the Access layer, 4500E for the Distribution layer, 6500 for the Core layer. Are these the ideal switches for each layer? If not, could you suggest any switch that is better than the current? Need your suggestions or thoughts about this. Thanks in advance!

Hi Seb, thanks for replying. My groupmates and I have already decided that we're going to have a distribution layer. So basically, is 3750 enough to be the backbone/core of the network? We're configuring the to have a Layer 3 design so that makes me choose on 3750 on distrib and core rathen than 2960 switches cause I think that's better than Layer 2 though I don't know specifically what makes it better. Do you know? So I could have a thorough explanation when I present it to my professor. As for the budget, the case study didn't give us any limit so I think layer 3 would be a better choice than layer 3. Thanks Sib, appreciate it.

[945 Series] 945P Platinum and core cell :(

HI!
Anybody tell me some issue about core cell and the 945P??
core cell does'nt work at all...My two board fans ( 120mm) turn a 2300 rpm and the cpu fan 2400 rpm !!! With my big Zalman, Idle time, the cpu ( INTEL 820) is very cold! 27 degres....!! Samething at 3000 mhz....
I would like to know if a patch is available ( I have the last one core cell at the MSi site) or if someone can give me some alternative...
My house is like an airport right now...you can imagine how!
Thank you!

Core Cell doesnt have a good rep on here...many problems. If i were you i would try out SpeedFan. You can download the program for free and it will ajust all your fan speeds for you after you configure it. It lets you set the temps and speeds, along with monitoring them for you. Just google SpeedFan and use the help section for the walk through on the configuration. Good Luck with your airport
Post back with questions

Core-1 and Core-2 study materials question

Similar Messages

Maybe you are looking for