Core Midi Server does not respond after launching Logic 8

Hi,
COREmidiserver crashes directly after logic 8 start. Any ideas, download links etc.?
Thanks very much.
Best regards
Tim

tbuechse wrote:
Hi,
COREmidiserver crashes directly after logic 8 start. Any ideas, download links etc.?
Hi Tim,
How do you know? You get an error message saying this?
What Mac & OS are you using?
How much experience do you have using Logic?
Have you been using L8 before without problems?
What MIDI interface are you using? And what Audio Interface?
And this always happens, no matter how you open Logic?
Or is this since you've installed it?
Do you have 3rd party plugins installed?
regards, Erik.

Similar Messages

Report Server does not respond after certain idle time

We have an oracle 10g application server on solaris 10.
The report server has the defaul settings for time out , callback etc..
After the report server stays idle for 2 or 3 hours and the first report that comes after that takes around 8 to 10 minutes to generate. The report server engine does not seem to be getting active immediately.
Is there any parameter I can change so that the reports do not get effected.
Thanks

I have put the idle time out at 300 minutes and the max idle time as 350 minutes. But that does not seem to have helped.And also I have min engine as 1 , max as 10.
Even with the above settings , When the report engine is idle after 30 minutes the 1st report to generate after 30 minutes takes 9 minutes.
please let me know if there are any other parameters I need to change.
thanks

Server does not respond my Activacion! Server is Broken!

Hi every one,
i cant activate my iphone 5
and server does not respond my Activacion

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Server does not Respond

When I try to Sync my E61 with Ovi.com I get this message: Server does not respond.
Can someone help me with this?

Sorry, Erga, for the late reply. Yes, I got the sms settings and I can acess the internet. I've already tried removing the device and adding it again to Ovi. I got a new sms but the end result is the same: Server does not respond...

Enqueue replication server does not terminate after failover

Hi,
We are trying to setup high availability of enqueue server where in we have running enqueue server on node-A and ERS on node-B all the time.
Whenever enqueue is stopped on node-A, it automatically failovers on node-B but after replication of lock table, enqueue does not terminate the ERS running on node-B and as a result our enqueue and ERS both keeps running on the same host (Failover node-B) which should not be the case.
We havenu2019t configured polling in that scenario SAP note-1018968 depicts the same however this is applicable only for version-640 and 700.
Ideally when enqueue server switches to node-B, it should terminate the ERS on the same node after replication and then HA software would take care of its restart on node -A.
We have ERS running of version 701; could anyone please let me know if the same behaviour is common for 701 version as well?
Or there is any additional configuration to be done to make it working.
Thanks in advance.
Cheers !!!
Ashish

Hi Naveed,
Stopping ERS is suppose to be taken care by SAP only and not the HA software.
Once ERS stops on node -B there would be a fault reported and as a result HA software will restart the ERS on node A.
Please refer to a section of SAP Note 1018968 - 'Enqueue replication server does not terminate after failover'
"Therefore, the cluster software must only organise the restart of the replication server and does not need to do anything for the shutdown."
Another blog about the same:
http://www.symantec.com/connect/blogs/veritas-cluster-server-sap
- After the successful lock table takeover, the Enqueue Replication Server will fault on this node (initiated by SAP). Veritas Cluster Server recognizes this failure and initiates a failover to a remaining node to create SAP Enqueue redundancy again. The Enqueue Replication Server will receive the complete Enqueue table from the Enqueue Server (SCS) and later Enqueue lock updates in a synchronous fashion.
So it is nothing about HA software, it is the SAP which should control ERS on node-B.
Cheers !!!
Ashish

The Connection Server does not start after an upgrade to BO4.1 SP3

Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
Gerd

Hi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need help

Originally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem

Finder DOES NOT Respond after Restart, Or Shut Down

I am running an iMac G5 on OS X 10.5.4, After a shut down or restart, Finder does not respond, The only thing on my desktop is My HD and Chosen wallpaper. I can launch Apps from the Dock, but not folders from the dock, Not Downloads folder, Documents Folder, Just Applications, which is weird because they are in finder too! Mail starts up when I log in so I can access Mail, I use Firefox, When I click on it in the dock it starts up no problem, after a while Finder does respond, I get all my icons back on my desktop and can access folders. I have Cleared System Cache, Browsers Cache, I ran Disk Utility and REPAIRED Disk permissions. No help. Short of RE-Installing Mac OS X, What Should I do? Is this happening to anyone else??

I am having the same problem!
I have tried the following: deleting the com.apple.finder.plist, deleting the com.apple.sidebar.plist, I have reinstalled the 10.5.5combo update, I have deleted all of my photoshop preferences (possible solution from another thread), and it is still doing it!

Satellite A65 freezes and does not respond after adding of RAM

Gents,
My laptop Satellite A-65 has been upgrade from 512 MB RAM to 1024 RAM. It recognized additional memory without any problem (as it should be according to manual).
But unfortunately after 1 day it begun suddenly stops, pictures on screen freezes, laptop does not respond at all - only reset (pushing and holding power button) can help. some times laptop is able to work 2 or 3 hours, but then again stops.
Memory place cover is rather hot, fan very often work uninterruptibly. so i can't decide whether problem is in new memory card or not enough cooling or might be in changing of BIOS version (or BIOS setttings) and might be memory becomes full and does not clear itself properly (last remark was found on some forumes).
Experts, help to find exact reason especcially if u had similar problem.

Hi
Im not expert but I would recommend removing the new memory module and let run the notebook only with the standard memory module.
If the notebook will not hang and will not freeze then its a very clear case for me.
Either the second module is not compatible or faulty.
In my opinion you should use branded modules like Kingston for example. The quality is much better as a no-name module.
Additional use the modules recommend by Toshiba

User does not respond-after reading countless post i still don't understand

hi. i have been reading post on the 'user does not respond' and i still do not understand. i don't know how to check my ports and how to change them. all of them have been pretty technical. please, is there anyone that can explain it in layman's term?
2006-09-17 07:57:14 -0400: sentosa225 did not respond.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
218.111.157.122:5060, 169.254.186.77:5060, 192.168.1.8:5060
that is what i get. i read and saw that 5060 is the correct port, is it?
can anyone please help me. there seem to be no end to this.

Hi Mark,I think I'll have to brush up my english first of all.Or think about how to put it,so that you can understand my abstract question.I tried to find a site of Adobe support in Dutch because that may be easier for me and for others to understand,because everything computer related is so new to me,that my questions are not very clear most of the time.But I can't find support in my language,so I will try and think a bit more how to answer your questions to my question.Bye.Marion

Canon LiDE 100 does not respond after wake from sleep

I have a Canon LiDE 100 flatbed scanner. I constantly put my iMac to sleep and only ever shut it down once every few weeks.
When the computer wakes from sleep the scanner does not respond. Image Capture lists the scanner in the device list but reports the following error;
"An error occurred whilst communicating with the scanner"
I have to unplug the USB cable and plug it back in for it to work (or restart the computer, both always work).
Since I only moved to the Macintosh in July I have no idea how to uninstall drivers to give myself a fresh start and the scanner does not come with an uninstall utility.
Any suggestions on how to fix this little problem?
Thanks.

I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it.

Server Does not start after backup complition

Dear All,
We are facing following problem some times after backup completion.
Our Setup is : SAP ECC 6, Oracle 10g, HP-UX 11.31.
We are scheduling the whole database offline + archive log backup during night.
After completion of backup the SAP does not start. I have checked the following things.
1. Database is started : OK.
2. SAP related services at O/S level : OK
3. Listener is OK
4. No startup log generated related to SAP
But I am not able to connect to SAP thru SAP GUI.
If I tried to start SAP using startsap it will not respond for long time. Even I have tried to startsap after shutting down database, kill all SAP related services at O/S level. But startsap doesn't respond.
When I restart the server, after that I am able to start SAP.
Is there any memory fragmentation related problem ?
Before some time same thing is happened with our production server, but at that time I have deleted Archivelog files manually before tacking backup. In this case if I take backup "whole database offline + archive log " then server doesn't start. At that time also I have to restart the server. So the Problem is identified.
But in this case i.e on our Quality Server not able to trace out problem.
Thanks in Advance,
Nirav

Hi,
Yes the problem is related to memory. I think during the backup memory is allocated but not release after completion of database backup.
in case of archive log backup what option your are using means are you using save and delete option or other.
In the case of the production server archive log backup you to use to the option save and delete.
Please also check wheather core file getting gernerated should be deleted frquently from work folder.
Thanks & Regards,
Vidyadhar K

My ipad 2 does not respond after upgrade to ios 8

I tried to upgrade my Ipad 2 to ios 8, which has been said to be copatible. During the upgrade process the Apple logo apeared on the black screen and has stayed there everysince. The ipad does not react on a hard reset and is not identified on connecting to a computer, Apple or PC. Screen stays on untill the battery has been emptied. Apple Store in Munich could not help me and told me guarantee has run out, there is nothing they can do, than to offer me a new Ipad 2 for 200 €. I can not understand, that an upgrade can "destroy" my property.

I had a problem connecting to my exchange server. It turns out that Exchange will only allow ten devices to be partnered to your account at a time. Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships." I followed the instructions and delted all the old accounts...problem solved.

Safari Does Not Appear After Launch After Extended Period Before Logging In

Dell Dimension E521
Windows XP Pro (all updates installed)
I restart the computer, and then I log into my user account immediately. I launch Safari (5.0.2). It launches and operates properly.
I restart the same computer, and then I log into my user account thirty or more minutes later. I launch Safari. There is no apparent Safari activity, except for the hour glass. Safari never appears onscreen, nor does the Safari icon appear in the task menu at the bottom of the screen. If I subsequently launch another application, then Safari appears behind it. Safari runs properly thereafter.
In the second scenario, if I launch other applications instead of Safari, then they appear onscreen and run properly. Safari seems to be the only application that displays this behavior.
Has anyone else experienced this issue? Can anyone recommend a solution?
Thank you.
Kurt Todoroff

By the way, can Windows place a computer into hibernation or sleep if a user is not logged in, since those settings have not yet been loaded?
It's a good question ... I was doing some reading up on BIOS before posting before, and there is some sign that BIOS or EFI can load some power management settings.
An alternate possibility is that the PC is in S0 (awake) while in that 30 minute period, but some individual devices on the PC may have slept:
http://msdn.microsoft.com/en-us/library/aa373229(VS.85).aspx
... and running Safari might not be waking up, say, the network adaptor properly.
I guess if that is the case, it might be possible to test it ... if you launch a different web browser (like IE) immediately after the "delayed log-ins", will Safari launch immediately for you if you launch it after launching the other browser?

Core Midi Server does not respond after launching Logic 8

Similar Messages

Maybe you are looking for