Corrupt Canvas

Is there any way I can save my canvas without deleting and recreating it? The problem is that I have three canvases. One is content and the others are stacked. Some how I got the first stacked canvas setting on top of the content canvas. I cannot see my first canvas in navigator unless I delete my first stacked canvas. If I changed the first stacked canvas to content then it goes away. I have tied to delete and copy the same canvas from another form that has no stacked canvas. I still get the same results. I don't know how this happened but it is causing others problems with my processing. I guess I don't understand stacked canvases. I was told that if I touch a data block I must continue until something is clear or a go_item is issued for another item in another canvas. If I have an item that is in one block and that item is used to process data in a different block and canvas that I can use a control_block to passed data. What is the proper way to handle stacked canvases? If I have items that are processed in the first block but are shown on the stacked canvas would I need to move those items to the next block or just assigned the values to the control_block and continue processing tried to keep the data blocks and canvases separate but I couldn't get them to display.
I fixed my previous problem but it cause another problem with my previous processing.
I think that if i could fixed the content canvas that my problem might go away. I would appreciate any help.
:-{                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Steve,
The stacked canvas is horizontally the same but vertically smaller Have you every seen a stacked canvas on top of the content one? I tried to go into the canvas and highlight the stacked canvas to delete it. It will not allow me to delete it. It appears that it is attached to the content one. I don't know how this happen I need to see the top portion of my content canvas when I am processing items on the stacked canvas. Something like this.
Based on what command I entered, the content canvas displays either with or without
the stacked canvas.
program:_________
Command:________ content canvas
ac_seg:_____
WO_NBr_____ stacked canvas
Repair______
proces clear
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
print clear
It Navigator this is what my content canvas looks like.
However, the stacked canvas looks like this;
ac_seg:_____
WO_NBr_____ stacked canvas
Repair______
proces clear
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
print clear
So the content canvas doesn't suppose to show the stacked canvas on top of
the content canvas in Navigator.
I appreciate any suggestions to fixing my problem.
Kimosabe

Similar Messages

  • Motion Generator appears fine in timeline/canvas, corrupted on export (missing layers)?

    I have a custom Motion Generator with a lot of layers & editable text fields that acts as an overlay to my video, so it runs through the whole project, broken up into clips whenever the text needs to change.
    I recently finished my editing, scanned through the project in Final Cut (seeing no errors), and exported it. But when I look at the exported .mov, one of the generator clips didn't render properly. The text is there, but the background images aren't. This isn't even something I can toggle in my Generator, it just like... half-rendered.
    The clips on either side were fine, and again, this only appears in the exported .mov. Within Final Cut Pro X, there is no way to tell something is wrong.
    So I opened the project back up, found the generator clip in question, and tried disabling/reenabling it, then exporting just a tiny section to see if that fixed it. The test was rendered properly, so I went back and exported the entire project again.
    This time, the original error was fixed, but in another section of the project (minutes earlier, in a different compound clip), the generator failed to render properly. This time, only half of the images loaded (rather than none), and a piece of text was rendered twice (once properly, once smaller in the middle of the screen, over someone's face).
    And again... it still looks fine within FCPX itself.
    Has anyone else experienced missing layers on a custom Motion Generator on export only?

    Elated - I have found the problem and, more importantly, a solution.
    While converting the original footage to ProRes, Compressor complained about one of the segments (the JVC camera records in around 18 minute chunks) I was trying to import. Sure enough there were some visual glitches on playback but FCP never seemed to care, but Compressor refused to convert it to ProRes.
    Which got me thinking.... back to the timeline I went. Knowing which segment had caused Compressor problems, I isolated it, and cut out all footage with distortion on it. I had used b-roll footage to cover the glitches anyway, but this time I used the blade tool to remove the offending video on V1 even though it was being obscured by V2.
    As if by magic, and to my great relief, the footage rendered and as we speak DVD Studio Pro has just spat out my first burn of the DVD (mind you it did take close to 6 hours to encode the footage to MPEG2!)
    So there you go folks, corrupt video footage, even though it isn't playing was enough to halt my export and suck two days from my life. Lesson learned.

  • Macbook Air 11" i7 corrupt files problem with Adobe Illustrator CS4

    Hi
    this problem may not be entirely related but maybe someone could help anyways or knows how I can proceed...
    I'm running Illustrator CS4 on a Macbook Air 11" (latest 2011 model, with i7, 4GB, 128SSD), and lately some files are getting corrupted. specifically, adobe illusrator CS4 files with weeks of work. interestingly, the time machine backups are also getting corrupted.
    its like I'm working on a file for a few days, backing up with time machine as well
    closes the file, after a few days returns to it… (normal behavior)
    then when i try to get back to the file then sometimes it says "Cant open the illustration, could not complete the operation" and opens a blank canvas.
    restoring the file via time machine also gives the same error (its like all versions get corrupted simultaneously), even 4-5 versions backwards, even though they worked before when the file worked
    it happened quite a few times, ruining weeks of work.
    I tried the following:
    reinstalling CS4 - didn't work
    Opening the files on CS5 - still don't open
    doing the file recovery thing and then opening it in a notepad - didn't work at all
    using Time machine - the files are still corrupt
    it only happenes with AI files, not photoshop files, for example.
    I thought maybe it has anything to do with SSD? since my previous macbook pro (15", 2007) never did these errors…
    please help
    Eido

    If at all, this would be I/O performance and bandwidth issues with Time Machine, but I don't think that's the problem. More to the point I think that it's a case of Preview opening the files to genereate thumbnails and icons and something going wrong there. I'd look up some guides on how to edit the relevant plist and conf files to exclude your AIs or turn off the behavior to generate these previews globally. This may help hugely...
    Mylenium

  • Safari 5.0.6 plug-in html file corrupted (now Safari doesn't run)

    Not sure how well I can explain this, as I'm definitely a novice!  Basically, Safari won't run or access certain websites b/c I'm guessing the html file for installed plug-ins is corrupt (Safari won't open the file file:///Applications/Safari.app/Contents/Resources/English.lproj/Plug-ins.html. While trying to open this file, I continuously see the spinning "wheel").  Also, interestingly, I can't open the website listing Safari's extensions gallery for the security options.  Safari will, however, let me access other sites (e.g., Apple Support).
    This all started to happen the DAY after the following:  In the interest of better securing my machine and/or having Safari run less slowly, I'd installed and enabled several RECOMMENDED Safari extensions (e.g., Web of Trust, Dr. WebLink Checker, and Ad Blocker).  I'd also enabled ClicktoFlash and changed several preferences (to accept cookies only from sites I visit; unclicking "Enable Java"). Everything was working BEAUTIFULLY (must faster and, when visiting a site containing videos or banners, I could click FLASH to run Flash for videos/banners requiring it).  Then, just this a.m., I first discovered I couldn't SEE ClicktoFlash and then discovered I couldn't open the plug-ins html file. I couldn't get into Canvas (a learning delivery system) that I desperately need.  I've tried uninstalling the new Safari security extensions mentioned above, clearing Safari's cache and its history, restarting my machine, restarting Safari, and even resetting Safari.  I've also repaired my disc permissions and restarted the machine, restarting Safari, etc. Nothing works to restore the plug-ins html file.
    My husband -- who is very proficient with MACs --  can't figure this out.  He did just install HIS version of Safari (same one for same OS) on my machine and disabled MY version of Safari.  Still having the exact same problem re the plug-ins html file.
    HUGE SIGH and thanks tremendously for recommending a fix!! I'd really rather use Safari than other browsers.
    Tamarajf

    Andy:  BTW, do you have any ideas about WHY the plug-in html file will no longer load in Safari?  As noted in my original query, this is what I'd done about one day before the plug-in file wouldn't load:  " I'd installed and enabled several RECOMMENDED Safari extensions (e.g., Web of Trust, Dr. WebLink Checker, and Ad Blocker).  I'd also enabled ClicktoFlash and changed several preferences (to accept cookies only from sites I visit; unclicking "Enable Java")."  Thanks for any hints you can share! Tamara

  • Corrupt canvases

    I have inherited a large database and front end created in Forms Builder 6i. I now need to edit some of the detail in the forms, but have found that two of the canvases have become corrupt. At least this is the impression I have formed. If I try to compile the form with these two missing, the only error message I get is that the system can't find them. If I try to edit the canvases in question, the whole Forms Builder package shuts down and delivers a Windows message asking if I want to let Microsoft know about the problem.
    What I need to know is if there is any way to sort out these two canvases without having to completely rebuild them (they are substantial).
    Any help would be appreciated.

    Sorry this reply took so long.
    I followed the advice given by Francois Degrelle, by just recreating the canvas in question. It took some time, but it works a treat.
    Thank you for all te replys, and thank you Francois for the working solution!

  • Maximum Artboard Size (Not Canvas Size)

    Hi,
    I read that maximum canvas size is 227in but Illustrator CC on both mac and windows and several different computer does not allow me to exceed 120in x 120 in. I can change my artboard size manually (shift+o) and drag the corners to 227inches but the number on the right upper corner is stuck on 120 inches. So what is the maximum size that I can work in Illustrator? If it is 227in why can't I make an Artboard bigger than 120 inches? And to avoid more confusion what is the canvas and what is the art board?
    Thank you

    mus,
    When things become seriously weird, as in your case, it may be worth trying the list (you have been through 1) and 2) already, and I would suggest your skipping 3) and 5), which leaves 4) and 6).
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
    https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Moving or zooming the canvas crashes my system.

    Been having this problem for a while now, and I just cannot seem to fix it. It also seems like nobody asked the exact same question before. All previous forum posts seem to be about photoshop itself crashing, while in my case my entire system locks up.
    It seems to work fine at the start, but it will lock up on me on random. I tried finding out what the exact problem was, and it seems that moving about the canvas in any way always seems to be the cause. I also often get this while I try to save, in the saving process I would move my canvas around, and it would lock up on me. Thus making my .psd-file corrupt/unreadable. I want to say I'm getting frustrated with this, but I already am...I can NOT get any work done.
    I tried different methods to approach this, but no luck. One is installing the latest video driver, but it already seemed to be up-to-date. Second would be disabling certain plugins in Photoshop, like the FastCore and the MMXCore ones. But even that did not solve the crashing. I feel I am running out of options I can find, so I am pointing my attention here, hoping that someone can help me.
    Basic system specs:
    VGA: GeForce GTX 580
    CPU: Intel Core i7 3930K
    Motherboard: ASUS P9X79 DELUXE
    RAM memory: 8GB
    Operation system: Windows 7 ultimate.
    Photoshop CS5
    - Stephan

    One of the things I can mention about my RAM is, The cooling I installed on my CPU was so big that I couldn't properly place the RAM under it, so right now there is a 4GB chip on each outer slot instead of the recommended position. Would RAM misplacement be the problem? If so I should probably get some smaller RAM then (which I feared I had to when I built it). I want to know for sure.
    If the RAM isn't the cause...I wouldn't know how to figure out which one of the other components could be the issue.

  • Get canvas.toDataURL('image/jpeg') and convert base64 encoding to java.sql.Blob

    Convert canvas.toDataURL('image/jpeg') to java.sql.Blob.
    I am using oracle adf so I am able to action a backing bean from javascript and pass in parameters as a map. I pass in the canvas.toDataURL('image/jpeg') which I then try to decode in my bean. Using BASE64Decoder and the converting the bytearray to a file I can see the image is corrupted as I can't open the file thus converting the bytearray to blob is also a waste.
    Has anyone any ideas on base64 encoding from canvas.toDataURL to file or Blob?

    Use Case:
    A jsf page that enables a user to take photos using the HTML5 canvas feature - interact with webcam -, take photos and upload to profile
    1. I have created the jsf page with the javascript below; this pops up as a dialog and works okay and onclick an upload image, triggers the snapImage javascript function below and sends the imgURL parameter to the serverside managedbean
    <!-- java script-->
    function snapImage(event){
                    var canvas = AdfPage.PAGE.findComponent('canvas');
                    AdfCustomEvent.queue(event.getSource(),"getCamImage",{imgURL:canvas.toDataURL('image/jpeg'),true);
                    event.cancel();
    <!-- bean -->
    public void getCamImage(ClientEvent ce){
    String url=(String)ce.getAttributes().get("imgURL");
    decodeBase64URLToBlob(url);
    private BlobDomain decodeBaseB4URLToBlob(String url64){
                    BASE64Decoder de=new BASE64Decoder();
                    byte[] bytes=de.decode(url64);
                    File file=new File("abc.jpg");
                    InputStream in = new ByteArrayInputStream(bytes);
                    BufferedImage bImageFromConvert = ImageIO.read(in);
                    in.close();
                    ImageIO.write(bImageFromConvert, "jpg", file);
                    return createBlobDomainFromFile(file);
    ----problem---
    Accessing the generated jpeg file shows the image is corrupted, probably missing bytes or encode/decoder issues.and the blob image after uploading to database is saved as a binary stream which ondownload doesnt render as an image or anything i know of.
    Is there anyways of achieving the conversion without errors?

  • Corrupt render files

    Can corrupt render files cause artifacts like small square white blocking?

    Yep, seeing it on footage that has been rendered on the edit suites I was working in at uni. Capture Scratch footage(raw captured footage)seems fine. Artifacts appear on canvas and external monitor. Monitoring via firerwire 400 port through mini dv deck on ext monitor. Working from an external firewire drive on a lacie pci firewire 800 port. Uni runs fcp 4.5 with OSX 10.4.2.
    Brought drive home to work on my system with fcp 5 artifacts still appearred until I reconnected them to the captured files and did a re-render. The artifacts have dissappeared, i think. I have saved a copy of the original to work with fcp 5 so i still have the original to work with at uni on fcp 4.5. I need to be able to work at uni as well as home.
    Do you think this problem stems from corrupt render files? To begin with I thought it might have been a tape problem but tapes play back clean, the clean captured raw footage seems to back this up.
    cheers for help

  • Stacked Canvas - FRM-40202

    I having this problem with my form. I getting a FRM-40202 error when trying to run my
    form which has two stacked and 1 content canvas.I have tried hiding the canvas.
    hide_view('canvas150'); go_item('control_block.pwo_nbr');
    AURUT is the content one.
    canvas150 is the stacked canvas I don't want to see.
    AWR is the stacked canvas i would like to see.
    the data blocks are as followed:
    reports
    range1 and range 2 are associated with the canvas150.
    range 3 and range 4 are associated with the AWR canvas.
    The first problem I have is that the AURUT canvas has the canvas150 canvas on top of it
    I tried deleted the canvas150 canvas and recreated it but it is still on top.of the content one and I also have a stacked canvas(canvas150) in my form.
    I think that my form is corrupt. How can I fixed this problem without redoing the whole form? I tried created a contol_block and assigning the items to the control_block in my program unit. But I still see canvas150. I getting frm-40202 error. What I have read about this error is that a field in my canvas150 needs to be filled in before it will allowed me to continue to the next canvas(AWR). I don't even want to see canvas150 while I processing the items on AWR. I'm lost as to what i can do to fixed this problem. If I changed the field in question in canvas150 to "NOT REQUIRED" my form crashes.
    I didn't have this problem with my first stacked canvas. Introducing my second stacked canvas has cause this problem.
    Thanking in advanced

    If I changed the field in question in canvas150 to "NOT REQUIRED" my form crashes.This should not happen. What happens when it crashes? Is there an error message when the crash occurs?

  • Cant see the document canvas just grey background

    CANT SEE THE CANVAS PS4 ?just built a new pc and my ps4 (previous hdd ) runs fine ( so the mob and video card seem all good ). I created a new os on a new hdd and installed ps4 everything seems fine but cant see the canvas , can draw on it but just see the grey backround ( i  can see it creating in the layers pallet). Illustrator works fine ..please help

    If all else fails try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
        A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • Black edge around canvas footage

    A friend of mine has been editing together his showreel on my system. when i came home he asked me why the footage in the canvas viewer was surrounded by a black edge...and I had to tell him: i don't know...
    my first inclination was to check all the settings, both for the clips and the sequences, and they were all correct and matching each other.
    what i noticed then was that if i put "show image+wireframe" in the canvas, i saw that each piece of footage was completely square, not slightly rectangular as I thought they should be...
    the files need constant rendering, sometimes it doesnt want to render as if the files have been corrupted or something, but the play properly.
    I am not sure where the files are from or what codec, etc, as my friend didn't know. all he knew whas that they were off a digibeta tape he had gotten from a respectable post-prod place.
    I also know that two of the 'films' where originally on dv and the third one on HD.
    I cannot make sense of this, anyone elese can?
    -j-

    EDIT My turn to be too slow... sorry Andy. END EDIT
    Right click on one of his clips in the browser and go to Item Properties > Format.
    Get out a note book and write down all the information you see (or do a screen grab or print screen – just make sure you have the information available to you.)
    Now click in his time line and hit Command-Zero. Change the setting in the General tab to match the settings of the clips that you wrote down.
    This might take a little trial and error especially if you aren't familiar with some of the terms, but you will get there.
    When you do, render problems should disappear and the black edges should disappear.
    Let us know.
    Tom

  • Opening previously saved XLF file, application freezes - on Loading Canvas

    When opening an existing XLF file, as the application is "Loading Canvas", the application locks up.  Have tried closing application and restarting, but cannot get Xcelsius to open the canvas.

    Some plug-ins and effects often take a lot just to render depending on what you're using, it's often taxing. What I would recommend is either turning off the "eye" or visibility before saving on any taxing effects that may slow the computer, or reducing the preview quality to a lower setting (Quarter for maximum save) before you save and exit. That way, when you open it up again, you can just turn on the eye to see your effects one at a time without AE loading it all up at once. Turn them on, render it out, and you shouldn't have an issue.
    If the memory isn't the issue, then it could be a variety of things. If it's a corruption issue, then it's well worth the effort to fix and prevent it from happening to the rest of  your projects. I'm afraid I can't say much for "rescuing" your AE files, only preventing or narrowing down the problems. AE programs freezing is sadly vague issue and could be anything. I wish you good luck!
    -Gunsang

  • Have lost the canvas and the custom layout option is greyed out (no longer possible to click on).

    how can we re-trieve?
    have tried to re-open and customise but keep getting the above.
    using FCP 7.0.3

    iditinjersualem wrote:
    how can we re-trieve?
    Have you closed the Canvas? Have you gone to  the menu Window > Canvas to toggle it on?
    If so and it has not appeared, have you moved the Canvas so that it is hidden, or mostly off screen?  Type Control - U  to reposition all windows in their standard position.
    Is the timeline missing as well? If so go to the menu File > New > Sequence and create a new sequence. Does it reappear then?
    If all this does not help, then your preferences may have become corrupt and you many need to trash them. Go to:
    http://www.digitalrebellion.com/prefman/
    and download Prefernce Manager (free) to reset your preferences.
    iditinjersualem wrote:
    have tried to re-open and customise but keep getting the above.
    The Custom layouts will appear greyed out until you create one first. From the FCP manual:
    More info at:
    http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=10%2 6section=3%26tasks=true
    Again, if you are following this procedure and it is not working, try trashing your preferences.
    MtD

  • Corrupt Oracle9IDS Files

    Trying to download Oracle9iDS from the following page:
    http://technet.oracle.com/software/products/ids/htdocs/winsoft.html
    But after downloaded all files and following the directions, double clicking on the exe file opens up winzip which said that is it not a valid zip file. In addition, the file size of the file1, file2 and file4 are not 100MB. We are using Windows XP and IE to download.

    Yep, seeing it on footage that has been rendered on the edit suites I was working in at uni. Capture Scratch footage(raw captured footage)seems fine. Artifacts appear on canvas and external monitor. Monitoring via firerwire 400 port through mini dv deck on ext monitor. Working from an external firewire drive on a lacie pci firewire 800 port. Uni runs fcp 4.5 with OSX 10.4.2.
    Brought drive home to work on my system with fcp 5 artifacts still appearred until I reconnected them to the captured files and did a re-render. The artifacts have dissappeared, i think. I have saved a copy of the original to work with fcp 5 so i still have the original to work with at uni on fcp 4.5. I need to be able to work at uni as well as home.
    Do you think this problem stems from corrupt render files? To begin with I thought it might have been a tape problem but tapes play back clean, the clean captured raw footage seems to back this up.
    cheers for help

Maybe you are looking for

  • OBIEE 11g Dashboard Prompt Reset Button Functionality

    Dear Experts, Can anyone explain what is the exact functionality of 'Reset' Button in any OBIEE 11g Dashboard Prompt. If anyone found any documentation related to it... please let me know. thanks, Varun

  • Windows XP to Windows 8.1 update 1 - ADK 8.1 with Confi manager 2012 R2

    Hi ,  We have windows xp systems that need to be migrated as referesh and replace to Windows 8.1 Update 1.  It is ADK 8.1 with Config manager 2012 R2. I remember there was a WinPE issue with ADK 8.0 is need to support win XP-win 7\8 migrations for re

  • Checks in RSRV for BIA

    Can anybody explain the difference between the checks in RSRV concerning BIA : 'Check definition of logical index' and 'Compare index defintion with database table'. They seem to be simular.

  • FM for pulsing of status bar

    Hi I am looking for function module to make sap session bar in windows pulsing. the reason is that when user has few sap sessions open, and in one of them sth happens (my event), this session should be pulsing in order the user to see it. I found FM

  • Can't close marquee performed by Lasso's Polygon tool

    Hi, When I double click to close the selection, the marquee vanishes instead of closing the selection.  Yes, I double click on the starting point. Here's what the manual proclaims (step 4): Draw a straight-edged selection area 1 Select the Lasso tool