Cost element date

Dear Friends,
I have tried to change the cost element date into future to avoid this element in current period. I tried in edit---analysis period the moment system shows the edited period but it is not saving in the system.
How can i save the changes to a cost element?
Thanks in advance
N.M.B

Dear ,
You can only Run Std Cost estimate for open period.
In SAP only 2 months can be open at the same time.
Current & previous only 2 months will be open.
So you can Run Std Cost estimate for last month or current month not for future month as it update material master also when you release it
Hope above will helpful.
Revert back for further assistance.
GOPAN

Similar Messages

Cost Elements (Data Migration)

Dear Experts,
I am new to data migration. I would like to check whether do we need to migrate controlling documents relating to cost elements (Primary and Secondary) to the new system.
If yes, where can I find the information
Thank you in advance.

Hi,
Controlling documents are created internally when you do transaction along with FI posting and this can be uploaded with LSMW.As it is a data that can be uploaded after the master data has been uploaded in the new system. For LSMW you can visit the following link.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/47/165469e5453699e10000000a11466f/frameset.htm
Thanks,
Ashish

Secondary Cost Element data in CO-PA

Hi,
I have a doubt in CO-PA, regarding the flow of secondary cost element costs.
I want to report the costs flowing through the Secondary cost elements (activity costs) in Profitability Analysis.
Can someone advise me on process to do this.
Thanks in Advance,
Safi

Hi,
Please define a group for Secondary cost elements or identify the secondary cost elements and define an Assesment cycle using KUU5 in that go to Extras-Cycles-Create and define the cycle and attach segment in cycle with appropriate sender and receivers and then execute the cycle to see the values flown into COPA
Regards
Balaji

How to get the table of cost elements data?

Dear friends,
I want ot get the Chart_of_Accounts, Cost_Element, Short_Text into an internal table, but how can I find the related tables in SAP system?
Thanks a lot!

Hi,
The table for cost element is CSKA.
Alternately you can use the bapi BAPI_COSTELEM_GETDETAIL for getting the details also.
Regards,
Ankur Parab

Secondary cost element actual data not posted

Hi Gurus,
Actually we are posting the actual cost elements data into particular cost cenetr through batch job.upto 12/31/2009 the actual data is showing for the particular secondary cost element(overheads).Only after 01/01/2010 the actual data is not posted for this particular cost element inthat particular cost center.For the remining cost elements into that particular cost cnetr the actual data is posted thru batch job.We checked that particularsecondary cost element,the validity period is upto 31/12/9999.Suggest on this one.
Thanks in advance
Jana

Hi,
Did you execute overhead allocation processes as from 01/01?
Regards,
Eli

Error while creating/changing/desplay cost element

Gents
Need urgent help. I am getting a below error while creating/changing/Displaying the cost element.
Table CI_CSKB is not an active table
Message no. AD 228
Kindly help me to get the resolve this issue.
Thanks and Regards
Vinay Thakre

hi
In Cost Elements (Data is Dependent on Controlling Area), please go to extras and check your controlling area while creating the cost element, and make sure if u r creating Primary CE, it has been created as a G/L account and also make sure you use correct CE Category.
Thanks
plz award points if helpful.

CSKA & CSKB Tables -Cost Element+ Controlling Area, Cost Element Category

I have few questions on Chart Of Accounts and Controlling Areas and CSKA(Cost elements (data dependent on chart of accounts)) and CSKB (Cost elements (data dependent on controlling area)) Tables--
1) One Chart Of Accounts has one or more Controlling Areas. Is there any situation where One Controlling Area contains many Chart Of Accounts.
2) CSKA Table contains all the Cost Elements under the Chart Of Accounts. So does all these Cost Elements appear under CSKB Table. Are there any Cost Elements which doesn't fall under any of the Controlling Area and only exists under Chart Of Accounts Level in CSKA Table.
3) In CSKB Table How do we know the corresponding Chart Of Accounts for the Cost Element.
4) In CSKB Table Cost Element Category depends on both Cost Element and Controlling Area. So does a Cost Element can be Primary Cost Element for one Controlling Area which happens to be GL Account and Secondary Cost Element for some controlling Areas.
5) Are there any Company Codes under the Chart Of Accounts which doesn't belong to any of the Controlling Area and doesn't have any Cost Elements.

Hi,
1) One Chart Of Accounts has one or more Controlling Areas. Is there any situation where One Controlling Area contains many Chart Of Accounts. Never
One controlling area can be assigned to many company codes, but all must have been assigned to the same chart of accounts only. This is the pre requisite for the so called cross company controlling
2) CSKA Table contains all the Cost Elements under the Chart Of Accounts. So does all these Cost Elements appear under CSKB Table. Are there any Cost Elements which doesn't fall under any of the Controlling Area and only exists under Chart Of Accounts Level in CSKA Table.
If some data exists in CSKA table, it mean that, it must have been created as a CE in any of the controlling area
3) In CSKB Table How do we know the corresponding Chart Of Accounts for the Cost Element.
In CSKB, you wont get the correspondant COA for the given controlling area. If you want to know it pass field value CSKB-KOKRS to table field TKA01-KTOPL to get the assigned COA
4) In CSKB Table Cost Element Category depends on both Cost Element and Controlling Area. So does a Cost Element can be Primary Cost Element for one Controlling Area which happens to be GL Account and Secondary Cost Element for some controlling Areas.
You cannot create a secondary cost elemant using a key matching with an GL code in cross company controlling. In case of both company codes assigned to different controlling areas this can be possible
5) Are there any Company Codes under the Chart Of Accounts which doesn't belong to any of the Controlling Area and doesn't have any Cost Elements.
Only In case of CO module is not active for the a company code
Note: If you have more queries, post it separately rather than asking all in one thread. and be specific with your requirement with the actual scenario.
Thanks,
Srinu

Cost element assigned to which GL account

i wanted to find out cost element XXXXXX assigned in which CC & Cost element XXXXXX assigned to which GL accounts.
can you please suggest the table name to check the cost element data assigned to which Company codes & which GL accounts.
Moderator: help.sap.com. Please, avoid asking basic questions

Hi,
Can please somebody answer my question
Regards
Harish

Same Cost Element in multiple Controlling Areas

Can a same Cost Element under the Chart Of Accounts(CSKA) used in multiple controlling areas under the Chart Of Accounts or it should be used only by one Controlling Area. Then as Cost Element category is under CSKB (Cost elements (data dependent on controlling area)) it depends on Cost element and controlling area. So can a Cost elemtnt in different controlling areas has different cost element category. Is that possible as in that case COst ELement becomes GL Account in one Controlling area and doesnt have GL Acvcount in another.

Yes. Provided it's the same chart of accounts being used across all of the controlling areas. In the case of primary cost elements, you will still need to individually create the equivalent G/L accounts in every applicable company though.

CO - Cost element group

Hi,
We use the tcode KAH1 to create Cost element groups. Here we can organize the cost elements (G\L) as a hierarchy.
My task is to get the transport table(s) that contains this hierarchy.
Can somebody help me with that?
Best regards,
Mohamad.

Hi,
You can all teh tables given below acc to ur req:
COKA CO Object- Control Data for Cost Elements
COSP CO Object- Cost Totals for External Postings
COSS CO Object- Cost Totals for Internal Postings
CRCO Assignment of Work Center to Cost Center
CSKA Cost Elements (Data Dependent on Chart of Accounts)
CSKB** Cost Elements (Data Dependent on Controlling Area)
CSLA Activity master.
To fetch the cost element from a given cost element group.You can use code given below:
Cost Element group can be viewed from field SETCLASS of table SETLEAF.
To Fetch the relevant cost element from a cost element
group, we can use FM: 'K_HIERARCHY_TABLE_READ'.
Sample code for this purpose:
Call Function module to fetch values corresponding to a
Cost Element group
CALL FUNCTION 'K_HIERARCHY_TABLES_READ'
EXPORTING
e_class = p_c_class
e_setid = p_v_setid
e_kokrs = p_kokrs
TABLES
t_nodes = p_it_cenodes
t_values = p_it_cevalues
CHANGING
c_info = v_info
c_overwrite = v_overwrite
EXCEPTIONS
no_controlling_area = 1
no_chart_of_account = 2
different_controlling_areas = 3
different_chart_of_accounts = 4
set_not_found = 5
illegal_field_replacement = 6
illegal_table_replacement = 7
fm_raise = 8
convert_error = 9
no_overwrite_standard_hier = 10
no_bukrs_for_kokrs = 11
OTHERS = 12.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
In this FM:
Export Parameters: p_c_class = (SETLEAF-SETCLASS) i.e '0102' for cost element group.
p_v_setid= The first four characters is the setclass ('0102'), the next four characters is the controlling area,the remaining characters is the cost element group.
p_kokrs = Controlling area.
Tables: p_it_cenodes = TYPE STANDARD TABLE OF ty_seth_node_line.
p_it_cevalues = TYPE STANDARD TABLE OF ty_seth_val_line.
Get the cost element in table p_it_cevalues
Please reward points if you find it helpful.

Secondary cost element table

Hi All,
We recently configured a new company code and I want to take out all the list of secondary cost elements which we used during testing for this company code.
Which table should I use and how can I do that?
Please assist.
Thansks in advance

Hi ,
Following are the table related to Cost Center Accounting
COKA CO Object- Control Data for Cost Elements
CSKA Cost Elements (Data Dependent on Chart of Accounts)
CSKB Cost Elements (Data Dependent on Controlling Area)
I hope it will be helpful.
thanks
Alok

Tables For Secondary Cost Elements

Dear Folks,
Please Help me for getting details (TABLES) of Secondary Cost elements Actual Line items Date wise and Cost Center wise
Thanks in advance
Regaards
ASHOK K

Hi Ashok,
some important Costing tables
COEP - Line Items (by Period)
COEJ - Line Items (by Fiscal year
COKA - Control Data for Cost center wise
COEJT - Line Items for Prices
COEPT - Line Items for Prices
CSKA Cost Elements (Data Dependent on Chart of Accounts)
CSKB Cost Elements (Data Dependent on Controlling Area)
CSKS - Cost Center Master Data
CSLA Activity Master
COBK - Document Header
COEJL - Line Items for Activity
COEJR - Line Items for SKF
COEPL - Line Items for Activity
COEPR - Line Items for SKF
COKL - Control Data for Activity
COKP - Control Data for Primary
COKR - Control Data for Statics
COKS - Control Data for Secondary
AUSP - Characteristic Values
A132 - Price per Cost Center
A136 - Price per Controlling Area
A137 - Price per Country / Region
COSC - CO Objects: Assignment of Original
CSSK - Cost Center / Cost Element
CSSL - Cost Center / Activity Type
KAPS - CO Period Locks -
regards
Gokul

Some cost elements are missing

Hi gurus,
We have peculiar situation,some costelements are missing in the table
how do we check them
anand

Hi
Check in the Table CSKB (Cost Elements (Data Dependent on Controlling Area) whether the cost element exists or not.
Also let me knwo wheter you are checking for primary or secondary cost elements
Assign points f helpful
regards,
radhika

Error while uploading cost element planning data into KP06 transaction

Hi,
I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
Error accured when generating data for the planning processor
Messange no.K9400
Revenue element 451000 can not be planned on cost center 9720
Thanks
Kishore

The cost element which have category 01 only can be planned in the Kp06.
Regards
Ranjan

How to Add new fields in Cost element Master data transaction: KA01/02/03?

New fields ZORGUNIT(CHAR 4) is needed to be added in a separate tab. The data should be updated in cost element master data trx.

>
Sr!^^ wrote:
> Hi
>
> try with PM01
Is there any relevancy in your answer?
Have you read the question?

Cost element date

Similar Messages

Maybe you are looking for