COST OF QM notification in QM Order

Hi All,
I am   creating QM Order with respect to QM notification by giving defect but I am unable to get cost of notification in QM order in fact I am unable to give cost in QM notification itself, please help on the same.

Hi Sitaram,
Have you activated QM-FICO links as suggested by the below doc by Keerthi P -
Key Quality Management Configuration for Integration with Other Logistic Modules
Then you should take clues form the below discussion thread updated by Gajesh Nagesh -
https://scn.sap.com/thread/1322483
Please can you try these options and feedback. Thanks to all original contributors for their threads!!
Thanks,
Arijit

Similar Messages

  • Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

    Dear All,
    This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
    Thanks & Regards,
    Patrick

    Hi
    I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
    Regards
    Raj

  • LSMW for open notifications,open sales order & open service order

    Hi Gurus,
    Can anyone please tell me how to go about writing LSMW's for open notifications,open sales order & open service order.
    This is for service processing in CS ,where has the scenario is 
    Create Notification (IW51) --> create Sales Order(Multiple Line Items) ( VA02) --> Create Service Order ( IW32)
    Service order is automatically (Item Proposal) generated w.r.t Sales Order (multiple line items)
    How to I do the recording for transactions in such a scenario.
    Please suggest!
    Thanks!
    Vinod

    you can use the below LSMW IDOC method
    SALESORDER_CREATEFROMDAT2       Sales order: Create Sales Order
    SERVICENOTIFICATION_CREATEFROM  Create service notification
      SERVICE_CREATE                  Creation of a Service Master Record
    CARNOT                          Delivery: Shipping notification
    DESADT                          Shipping notification
    DESADV                          Delivery: Shipping notification
    INOTIF                          Notifications
    INTUPD                          Notification Status Update
    ISU_ADVICE                      IS-U Deregulation: Notification
    ISU_CHANGE_REQUEST              IS-U: Notification of Change to
    ISU_MAINT_SO                    IS-U Dereg.: Notification of Dev
    ISU_REMITTANCE_ADVICE           Transfer Notification

  • Issue with Cost center in PO and Work Order

    Dear Expert,
    I am facing an issue with respect to cost center in Purchase Order and Work Order. The PO is made against a work order. There are two cost center associated with the work order. One is updated under u201CAdditional datau201D field and other is at u201Clocationu201D . So the cost center in PO should essentially be the same one mentioned under u2018locationu2019 field of work order. So the issue here is that while creating PO, the cost center is picked from the u201Cadditional datau201D field of work order not from u2018locationu2019 field of WO.
    Is there any exit available that needs to be implemented for overriding the cost center in PO or any other way of solving this problem?
    Thanks in advance.
    Thanks
    Deba

    Hi,
    I guess that there is already some user exit or enhancement in place, since this doesn't sound like standard SAP (picking the cost data from additional data, or even having it there).
    Mario

  • Actual cost is coming zero in service order

    Hi experts
    I am newer in CO.i can not recognise that "Actual cost is coming zero in service order".Please let me know that sollution
    thanks in advance
    sachin

    Have the cost data been archived? If not, please check configurations and whether there is do actual goods issue or activity confirmation posted. Check plan and actual costing variant under tab page 'Control', BOM structure under tab page 'Components' and Routing structure under tab page 'Operations'. And if any goods issue or activity confirmation to the order, cost can be analysed under tab page 'Cost'.

  • Cost of QC sample on Process Order

    When we are posting GR of our Finished or semi finished goods an inspection lot will be created. when we take the Usage Decision on this lot and took samples from the total and post the remaining quantity in unrestricted. the cost will be charged on Process order, which is wrong. we want that the cost should be charged on a QC cost center. when we take Usage Decision on raw and packing material the it always ask for the cost center and the cost is charged on that cost center. in case of finished and semi finished it is not asking. and if we forced it to a cost center it always charged it to a process order.
    1. explain me that charging of qc cost or sample cost on process order is standard?
    2. what could be the solution of this problem?
    3. what could be the work around of this?
    Do participate points are guaranteed on value added input.........

    Hi Syed ,
    In that case what I can think of is introduce a new operation as quality inspection in routing & then implemenent activity as activity cost for the same . Now confirm the operation & there you can capture the time spend in quality & translate that in amount through the activity pricing ......
    But in this also it will have effect in the order cost but you can differrentaiate the amount spend in mfg & amount in quality seperately...........
    Thanks
    Kaushik

  • Hide the cost and margin fields on Sales Orders and Invoices

    Hi all,
    I need to hide the cost and margin fields in Sales Orders and Invoices. We sell our products to our employees sometimes, hence we don't want them to know cost and margin information.
    Can this be done?
    Cheers

    Go to VOV7 & as per the Item category ,de - select the Check Box Determine Cost.
    Else remove the Condition Type VPRS & Margin Condition type from the Pricing Procedure
    Best Regards,
    Ankur

  • Make cost center default for an internal order

    Hi friends,
    I want to make the cost center default for an internal order type. Can you please tell me how can i achieve that.
    Regards,
    Wasim.

    Hi Atif,
    thanks for your valuable reply but i am having different cost element depending on what is ordered. Is there anyway we can achieve this.
    Regards,
    Wasim.

  • Service Notification and service order in ISU

    Dear's
    I want to know that how to configure Service notification and service order in ISU and in ISU their is any posibility if i put a note with meter reading the notification is auto genrate?
    Witing for your positive responce
    Regards,
    Syed Zahoor Ahmed

    Check out [Work Management Help for ISU|http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dc955eafc11d18a030000e829fbbd/frameset.htm].
    Then you can go to your sandbox SPRO and try the configuration.
    For note question, I am not sure whether I understand it correctly. If you want to automatically create MR from the note that you put in notification. There is not configuration for that. you need an enhancement.
    Chaiphon

  • Sales order costing error found in quotation 2 order line items created in

    Sales order costing error found in quotation 2 order line items created in quotation 5000562
    1st line item with third party
    2nd line item with PTO
    Purchase price was entered in the configuration screen
    1st item : 2,000 EUR
    2nd item: 1,200 EUR
    Purchasing info record was created with variant condition for EUR
    Error in sales order costing:-
    System does not take the purchase price in the configuration screen to
    calculate sales order costing. It incorrectly took 1 EUR from variant
    condition in sales order costing for both items.
    By right, it should take purchase price from configuration screen.
    Pls advise
    Thanks

    no replies and my thread was dead.

  • Costing affect with MRP at planned order level and after production order

    Dear all,
    How the costing affect with MRP at planned order level and after production order completion?
    Edited by: Maulik on Jun 24, 2009 1:59 PM

    Dear Maulik,
    check Mr. Vinod's inputs abt costing
    1. Maintain following master data:
    MM01 Material Master with Costing and accounting view. Make sure all the cost Std, Moving avg etc is maintained along with valuation class in Accounting view 1. In costing tab pls make sure "with qty structure" and "Material Origin" are ticked.
    CS01 BOM with components marked with costing relevance in Status/Long Text Tab. Also check all the qty are correct.
    CR01 Work Center in Basic data tab maintain standard value key sau SAP1 and in costing tab maintain the workcenter, activity type and formulas (Usually standard formulas like for Machine Hours SAP006, Labour SAP007, Setup Activity SAP005 is used).
    KL01 Cretae activity types, in basic data tab maintain ATyp Category AS "1" and cost element (as provided by your FI Guy).
    KP26 Activity pricing, here with the combination of Activity type and the cost center you assign price to the activity.
    2. SPRO Activity
    Maintain Costing sheet IMGControllingProd cost controllingProd Cost PlanningBasic settingoverheadsdefine costing sheet.
    OKKN Define costing variant, you define costing type (In the costing type, you define the purpose of a material cost estimate by specifying, for example, which field in the material master record the costing results can be transferred to like std price, moving avg etc), Valuation Variant (defines how the prices are prioratized), date control and transfer structure.
    3. Costing Process Flow:
    1. CK11N CREATE COSTING RUN
    2. CK24 CREATE PRICE UPDATE (You Mark and release the prce to be updated)
    4. COSTING VARIANT WRT PP
    1. OPL1 DEFINE COSTING VARIANT WRT PP
    2. OKK4 or OPN2 DEFINE VALUATION VARIANT
    3. OKK1 or OPM1 DEFINE COSTING TYPE
    4. OPL8 ORDERTYPE DEPENDENT PARAMETER (assign the above creted costing type for both planned and actual)
    Hope this will throw some light on product costing.
    Regards
    kumar

  • User status for Notification and Work order

    We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
    Do you have any suggestions?

    Hey Chandra,
    The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
    Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
    I dont see any other benefit of having User Statuses added to Notification as well.
    Do let me know if you have some more info on Why Customer is requesting this....
    Regards,
    Avi

  • Partner data copy from notification to repair order

    Hi, all
    I have this question, where I want to use one time customer for my repair order. Usually I add this one time customer in notification, when I creating service order (SM03)from repair order it not showing the customer in the service order... all it shows blank space. I am able get the address into SM02 order type but its not getting any details for SM03 type.
    Can anyone tell me what I am missing here, to get this done.
    Means the way to copy partner address from notification to repair order & from repair order to service order.
    Any help is very helpful....thanks a lot in advance
    Thanks

    Please check whether you have maintained same Partner Determination procedure for SM03 order type as notification type. You might have maintained same for SM02 & respective notification type.
    http://www.sapfans.com/forums/viewtopic.php?f=7&t=323195&start=0&st=0&sk=t&sd=a
    Regards,

  • Archive service notification and service orders

    Hello
    We need to remove few service notification and service orders from the system.These were created by mistake and now we want to remove those orders and notificaiton from the system
    Please explain with required transactions.
    Regards
    Santosh

    Check preconditions for archiving notification :
    1) The notification has been marked as u201Ccompletedu201D in Change Notification.
    To archive notifications, go to transaction SARA. The archiving object for Notification is NM_QMEL.
    Click on the Write button in the initial screen of Archive Administration to start an archive session of archiving notifications.
    RQARCNMA u2013 Archive Notifications
    RQARCNMD u2013 Delete Notifications
    hope that your problem will be solved.

  • Actual & planned costs calculated while creating Plant Maintenance Order

    Hi All,
    I would like to know how the actual & planned costs calculated while creating Plant Maintenance Order (PM Order)
    Thanks,
    Ajay

    You need to create an activity rate for 2014 for cost centre 51260201 and activity type NAHG20.
    This can be done via transaction KP26, but is usually performed by your Finance team.
    PeteA

Maybe you are looking for

  • Displaying an HTML Data Set on button click

    I'm using the code from the HTML DATA Set Example I have the code in a function and I want to have it display in a div on the page when a user clicks a specific button. I get this error message: "spry:region or spry:detailregion attribute has no data

  • Sending attachments/binary data from flex to Restful APIs

    Hi, We have a requirement of sending the files (or binary data) from flex GUI to Restful services(backend APIs). We are using flex HTTPService component to invoke the rest apis. The Rest APIs are designed to accept the multipart/mixed data which can

  • F4 Help for Classical ALV Grid ( REUSE_ALV_GRID_DISPLAY_LVC)

    Hi All, We have an ABAP program that displays data using REUSE_ALV_GRID_DISPLAY_LVC. There is an editable column in the report for which we need to display F4 help. The functionality of the F4 help will completely user-defined. Please let me know how

  • Gallery for client photo review

    Search didn't give me much useful, so I post. What recommendations to you have for a easy to navigate LR gallery for clients to add comments and return them to me. Or, do people have recommendations for galleries they like for presenting images to cl

  • Maintenance schedule in PAM03 Planning table

    Hi, I have read in SAP help that the maintenance planned for vehicles can be seen in PAM03 planning table. But there is no further information on how to get this. Kindly provide your valuable suggestions. Thanks&Regards, Pavan