Coverage not provided by master plan

Hello all,
When I run MD02, planned orders are generated but no purchase requisition is generated. The error is : "Coverage not provided by master plan".
What can I do to sort out this error?
Thanks in advance.

Dear,
Please go through the links which will give idea about your issue.
Where as Coverage not provided by master plant is an exception message which details situation as : "Coverage not provided by master plan Excess stock planned based on the "Range of Coverage" profile. Coverage profiles should not be in use. Remove the "Range Of Coverage Profile" from the MRP view of the Material Master and run MRP manually. Contact the HelpDesk for assistance if unable to resolve error".
http://www.sap-img.com/production/mrp-not-creating-purchase-requisition.htm
http://help.sap.com/saphelp_45b/helpdata/en/f4/7d32bb44af11d182b40000e829fbfe/frameset.htm
Regards,
Syed Hussain.

Similar Messages

MD50 , getting exception "Coverage not provided by Master Plan"

Dear Sir,
We have mate-to-order scenario and MRP run was made using MD50 against a Sale-Order .
After the MRP run , we are getting an exception in MD04 for a Material which is a Bought-out Material . The exception is "Coverage not provided by Master Plan" .
The detail about the Material (X) having exception is as below :
The requirement for the Material X as per BOM is 15 nos . We have 10 numbers quantity for Material X available in own Stock . The Material X has Individual/Collective Indicator set as 2 in MRP view .
After the MRP run under MD04 , for Material X following information appear :
Date            MRP Element    MRP Element Data     Rec./Reqd Qty       Available Qty
20.06.2008   Stock                                                                             10
24.06.2008   DepReq            1300-100                    15-                        5-
As a logical for the balance 5 qty , Planned Order of 5 nos qty must be generated . But no Planned Order has been generated . In MD04 view , the Item has exception "Coverage not provided by Master Plan" .
We request , to kindly guide us as what is the reason for the mentioned exception and how to resolve it . Why it has not generated Planned Order for 5 nos qty .
Regards
B Mittal

can you please speicify the what is the MRP type used for materials X, the material for which requirement is not generated in the planning run?

MRP Exception message :- 40- coverage not provided by master plan

HI ,
I have a sales order & i run the MRP & after MRp run , the rpoduction order generate for the componant material , the systemeis nshowing me the exception message 40- coverage not provided by master plan .
I have checked the stockes for the all componant material , there is no stock for the componant material ?
Please help me out in this
Piyush

Dear,
Please refer OSS notes 550441 question no 06 for Exp message 40 Coverage not provided by master plan.
Exception message '40' resulted from the calculation of the ATP quantity in Transaction MD04.The calculation of this ATP quantity is not provided anymore in Transaction MD04 since it was not an "actual" ATP quantity as in Transaction CO09, but it was calculated according to a separate logic which did not take into account certain relevant parameters.Branching to the ATP quantities now leads to Transaction CO09 which considers all MRP elements, checking rule and scope of check.This instrument should be used now, here the previous exception message '40' is equivalent to a negative, cumulated ATP quantity.In Transaction MD04 exception messages '10' and '30' from the rescheduling check can also be used to determine receipt elements that are not covered.
Regards,
R.Brahmankar

Coverage not provided by master plan - EXCEPTION MESSAGE 40

Dear All,
I am continuously getting the message - Coverage not provided by master plan - EXCEPTION MESSAGE 40 - after MRP run for the materials at 2nd level of BOM and no planned orders are getting created.
I tried in all different ways reffering to different forums, but unable to resolve the issue.
How to overcome this issue.
Regards,
Pavan

Dear Mario,
Thanks for your reply.
Here requirements for production are coming from WBS from Project.
We made changes in the dates in WBS and run MRP, Now system is able to run without any errors.
Regards,
Pavan

Why does Verizon not provide 3G coverage in Western Maryland (Garrett County) and why does it not have an agreement with US Cellular for such coverage?

Why does Verizon not provide 3G coverage in Western Maryland (Garrett County) and why does it not have an agreement with US Cellular for such coverage?

Thanks for the zip code pfekete. I looked into the coverage in your area and I do see you are in an extended 1X data coverage which explains why you're not connecting to 3G. What phone do you have? We may be able to advise you on how to adjust the settings so it picks up the strongest signal. I apologize for the inconvenience.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Adobe Media Encoder - .wmv export not provided?

I'm using Adobe Media Encoder CS6 on a Windows 7 machine. I need render out a Windows Media format (.wmv) but it is not found in any of the presets or from the format drop-down menu. Only F4V, FLV, H.264, H.264 (Legacy) and MP3 are available.
I can't find any information that indicates that I need to install extra codecs, but I believe this is the problem.
Or, maybe it's the version of Creative Suite that doesn't allow for certain file formats?
Anyone?
Thanks.

Hi thanser,
Adobe Media Encoder has all the codecs like QuickTime, WMV and others if you have any Video application Like, Premiere Pro, After Effects or SpeedGrade installed because these are royalty bearing codecs and can be activated if you have Video application installed and activated with the respective serial number. If you have license for Indesign, Illustrator or Photoshop you might not get these codecs. So, The video applications are provided with Master Collection suite or Production Premium suite and if you have any other suite you can only use Video Products as a trial for 30 days and get these codecs for a limited time.
Regards,
Vinay

Powershell, design manager, uploading html file not creating associated master page file

I am uploading a xyz.html file through powershell for 2 site collections, when .html file is uploaded and published it automatically creates xyz.master file. It is working fine for not publishing sites collection only, for publishing site collection .html file
is uploaded successfully but it is not creating associated .master file. If I close powershell console and run again it works successfully.
another interesting thing I noticed that if I specify "spadmin" account which I used to install sharepoint as site collection primary administrator, all works well, currently I am using "spsiteCollection" account for primary site collection
administrator and I am having above mentioned issue.
powershell script is also running with spadmin account.
I have ensured .html is checked in and publish properly, If I manually unpublish and publish .html file it creates .mater file. What could be the issue?

Hi,
According to your post, my understanding is that you have an issue about upload html file to master page gallery.
I have used the PowerShell contains in the codeplex to upload the files to master page gallery, it works without any issue.
https://uploadmasterpages.codeplex.com/
You can check your PowerShell with this article, or use this bat file to upload directly to check whether it works.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Error: web template does not exist in master system

I have Bex 7x query. I wnat to publish it on SAP enterprise portal (EP 7.0 SP19).
When I create a Bex iview and provide link of query, I get following error in preview:
The webtemplate <queryname> does not exist in master system.
Could you please let me know what can be the root cause of this error?
Regards,
Deepti

Dear Deepti,
Can you please make sure that Web template "0ANALYSIS_PATTERN" is acive in your system. If not, please activate it from
Business content.
You can check this by following below steps:
Please run TX SE38 and Execute Report RS_TEMPLATE_MAINTAIN_70 and enter the template name and execute.
If you could see the HTML code , this means it is activated.
Could you also please confirm me the settings you have in TX RSCUSTV27.
Regards,
Arvind

Master Plan - problem with calendar into Subproject

If the
save in the sub-project baseline
and then connecting it to the
master plan during the publication of
the master plan, an error is returned
"not found the appropriate calendar project............".
The solution is to
first connect the subproject to the master
plan and only store in the
sub-project baseline. Do you know why this is happening
and whether Microsoft is going to fix it?
Do you know when I may see the problem
with calendars, which should be avoided?

If the
save in the sub-project baseline
and then connecting it to the
master plan during the publication of
the master plan, an error is returned
"not found the appropriate calendar project............".
The solution is to
first connect the subproject to the master
plan and only store in the
sub-project baseline. Do you know why this is happening
and whether Microsoft is going to fix it?
Do you know when I may see the problem
with calendars, which should be avoided?

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Personalize link not visible in mast head

Hi ,
The personalize link is not visible in mast head.
Can anyone guide me on this .
Best Regards
Sid

Hi
Go to Content administration -> Portal content-> Content provided by sap -> End user content->Standard portal users -> Worksets-> Portal personalization to the role of the user
You can also assign eu_role role to that user to enable the personalize link in masthead but this brings iviews too in the content area.
Regards,
Ganesh N

Reimbursement of services not provided

I attempted to go on the $45 month to month plan on July 25th. The CS rep took my info and charged my debit card $49.28 for the first month, supposedly set me up and gave me instructions on activation. I followed her instructions, but the activation failed. I then contacted tech service at the # she provided in case of such occurrence. While talking with the tech we decided that a better plan for me was to go with the loyalty plan, and was activated successfully on that plan. I have tried numerous times in these 6 days to contact the right person to reimburse my account for the $49.28 charged to my account that services were not provided. Every person I have contacted tells me the same thing....."this is not my dept", and transfers me to another person who says the same thing, and transfers me. I have talked to so many ppl that I am frustrated as hell, and start taking it out on the person I'm talking to next. I have contacted my bank about these charges, but it was too late as they were already paid. I just need the correct person to talk to so that issue is resolved.
Where do I go from here to resolve this and get reimbursed?

Obviously you are not understanding me cause your questions and answers are irrelevant to my issue. However I finally found a customer service rep who looked over my account and understood the problem. My account has now been credited.

Sales order (SOBKZ = &1) is not provided for this goods movement the messag

Dear Friends,
I have created one subcontracting PO based on a sales order, so the order is belonging to special stock...
Now i got a below error when i transfer the stock to subcontractor against this PO through MB1B but it likes as warning msg(in Yellow) but i can't post this transaction.
Sales order (SOBKZ = &1) is not provided for this goods movement the message no is M7374
Kindly help me how to over come from this?
please note that as per the system suggesion i go to Define Attributes of System Messages for changing the message type from E to W. But i can't find this kind of message type in that list.
regards,
sathes

Hi,
Subcontracting for Sales Order Stock: -
Purpose: - Subcontracting is also possible in conjunction with sales order stocks. The subcontracting orders are account-assigned to a sales order. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock the time of the goods receipt. The material manufactured is also posted to the sales order stock.
The cost of subcontracting is then debited to the sales order.
Since the components are not transferred to the "stock of material provided to vendor", it is recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks.
Features: -
Withdrawal from Stock of Mat. Provided or Sales Order: -
For components that are managed in sales order stock, you can define whether the components are to be withdrawn directly from each sales order or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
In the MRP view of the material master record (MRP 4)
In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types )
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock.
Refer following link;
[Subcontracting for Sales Order Stock and Project Stock|http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm]

Sim Card Service Not provide Internet

Hello,My Sim Card Service Not provide Internet Now tell me how installe game in my phone BB 8310 .how use internet ?

Hi goldpk,
Sorry but at the time when I posted I had seen that you had mentioned Voice Signal as your carrier anyway thanks for the update, to download Apps login to App world here Blackberry App World from your PC or Laptop using your Blackberry ID ,or from your device open App world to download games or anything you want,But make sure as I said you must have a Blackberry Data Plan to access App World.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Master Planning Object Structure

Hi Everybody,
Can any one please clarify my doubt as to whether the MPOS (or Master Planning Object Structure) has characteristics or key figures or both of them?
Thanks & Regards,
Ujwal Arora
SAP Support Consultant

Hi ,
MPOS only have the characteristics value not keyfigures,
The planning area only having your keyfigures values.
The value of the characteristics which is stored in planning area that's why you refencing your MPOS in planning area while creation.
Let me know if you need more information.
Regards,
Prabhu

Coverage not provided by master plan

Similar Messages

Maybe you are looking for