CP1518ni, manual feed error

My Laserjet CP1518ni gives me a manual feed error message with every print job.  This started when I manually fed using Paper Tray 1 to complete a print job.  I must have changed a setting somewhere and have no idea how to change it back.  I've printed the Configuration page and it shows the Manual Feed is ON under the Paper Settings, but when I go into Paper Settings, there are no options to change the Manual Feed.
Any suggestions or help on where to make that change would be appreciated.
Jack

jackt2 hope you are doing well and sorry to learn that you are having this issue;
If you still facing this issue i will do my best to help you
Have you update the firmware of the printer GO HERE 
what operating system are you using  if you are using windows HP designed a quick and easy tool that diagnoses and resolves many printing, scanning, and connectivity problems HP print and scan doctor
Hope this helps let me know the outcome will do my best to help you if you need furhter asistance
Regards;
RobertoR
remember↓↓↓
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

  • Multiple-feed error

    unable to resolve Multiple-feed error, printer picks-up large stacks of paper & jams. Difficulty opening rear cover (sticks), however, once open the bunch-up paper requires pliers to remove.  In an earlier warranty calls to tech. support in India,  I was instructed to return the printer for replacement. But I was diagnosed with cancer, in 2009 unable to follow through & comply due to medical complications, was discharged from Memphis Hospital in 2014 . What are my present options? Is there a manual paper feed option, bypassing paper tray? Thank You!

    Hi , I understand that you are having issues with the printer pulling in multiple pages at the same time. I will certainly do my best to help you. I am very happy to see that you are doing better. Best of luck with your recovery. Unfortunately this model doesn't have a priority tray for single sheets. Please try these solutions:
    1. Remove the stack of paper from the tray and flex it, rotate it 180 degrees, and flip it over. Do not fan the paper. Return the stack of paper to the tray.
    2. Use only paper that meets HP specifications for this product.
    3. Use paper that is not wrinkled, folded, or damaged. If necessary, use paper from a different package.
    4. Make sure the tray is not overfilled. If it is, remove the entire stack of paper from the tray, straighten
    the stack, and then return some of the paper to the tray.
    5. Make sure the paper guides in the tray are adjusted correctly for the size of paper. Adjust the guides
    so they are touching the paper stack without bending. I checked out the Laserjet Color Pro CM1415fnw printer in our lab. Try these steps to see if it may help.Turn off the printer and disconnect the power cable. Remove the paper tray and flip up the jam access door. Look inside where the paper tray was, at the back area, in the middle. You will see two little white rollers. Make sure they are moving freely and I would clean them with a damp cloth and then dry them off again. Open the back access door and check for any rollers also need to be cleaned. Try running a cleaning page through the printer.From the Home screen, touch the Setup icon.
    Touch Service.
    Touch Cleaning Page. What type of paper are you using? You may Contact HP Support to inquire about the trade in options or service. Fill in the model number and the form to receive a case number for quicker assistance. If you appreciate my efforts, please click the 'Thumbs up' button below. Please let me know the outcome. Thank You.
     

  • P1505 "Status: Manual Feed Required."

    I installed a P1505 on a Vista laptop via USB last week, and it worked fine. Today, the user called me and said that after she'd turned her printer on (which she claimed she hadn't turned off?) this morning, she printed one document, and it began saying "Manual Feed Required" and refuses to print anything else. I am at a loss, there don't seem to be any troubleshooting docs which refer to this error, googling brings up references to using the printer on a print server which is no help to me, and reinstalling the printer software drivers etc seems to have not done anything.
    Message Edited by coyo7e on 07-13-2009 11:01 AM

    Test reply by James Ugrin - never used the forum before and want to see if I get an email.

  • 2015 DN manual feed problem

    Hi all:
    I have a two 2015DN printers.  One runs fine in all respects but the otherone has an odd problem with the manual feed.
    If I have any paper in the manual feed tray that printer will not automatically grab it and print, but instead hangs with a "no paper" feed error.  The other printer will automatically take paper from the manual feed tray if it is present.
    Any ideas what is hanginging the printer or what to look for.  I have a copy of the service manual but it doesn't address this issue.
    While this is a critical issue it would be nice to have the printer work properly. 
    This same printer also sometimes doesn't recognize that the normal feed tray is seat and it is sometimes necessary to "firmly" seat the paper tray to turn the warning light out.
    All help appreciated.
    John S. (aka Fr. Frog)

    The webpage and driver are not linked in any way. The webpage is for jobs submitted on the webpage.The driver will always print to the regular tray and the bypass is used when the job is programmed for what is in it, which typically is something abnormal to plain white Letter. So if you were to set the driver to print on "labels" and the printer bypass tray is loaded with Labels (Programmed as such) then the Auto select would work in the driver as long as Labels was set.  

  • Print a document with mixed Legal/Lett​er paper with 1 tray and manual feed

    I have an HP Laserjet Pro MFP M521 with one paper tray. I need to print a document that has a mix of legal and letter size pages. Is there a way to set it up using the one tray and the manual feed so that it will print correctly?

    hello, please don't open new questions for the same topic, but keep all your answers in your original thread at [https://support.mozilla.org/questions/985876]! this will make it easier for contributors to provide effective help.
    thank you!

  • How to turn off Manual Feed envelope prompt on printer scrn LaserJet Pro 200 Color MFP M276?

    Somehow, in trying to figure out how to get an envelope to print from the feeder tray (which I found out isn't possible), I turned on something that produces a printer screen prompt that says something like 'Manual Feed" then says the size of envelope and waits for response.  This is every time I print an envelope & it's really a pain and I'm not finding where/how to turn this off.  Can anyone help?  Thanks in advance.

    Hello miebs, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having envelope issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Also, What programs are you printing from?  Does it occur from multiple programs?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP LaserJet 4200 -- manual feed tray not working after 10.6 install

    Hi all...
    One of my users pointed this out to me. I'm looking for confirmation (or a solution)?
    We have an HP LaserJet 4200 printer added to our mac clients as an IP printer. Under 10.5.8, printing to "Tray 1 (Manual)" goes where you think it would -- to the manual feed tray.
    Upgrading to 10.6.1? Manual print jobs are going to the internal "Tray 3".
    It's the same behavior if I use the 10.6.1 "5.3.0" printer driver or the HP Printer Update 2.1 updated "5.4.0" version.
    Can anybody else confirm/deny the problem with their 4200 printer under 10.6? If you can confirm it, do you know of a fix (short of rolling back to 10.5.8).
    A remove and readd of the printer did not help here. Unfortunately.
    Thanks!
    - Steve

    Resolved this two ways:
    1) the "gutenprint" driver worked.
    2) The larger problem was the manual tray had been set to "A4" size.
    I used the web admin interface to set this to "any size" and "any" type and that fixed the problem with the 5.4.0 "LaserJet 4200 Series" default printer driver...
    Luckily, somebody else on campus had one of these printers and we were able to compare the printer setting differences to figure this out.
    I hope this helps somebody!
    - Steve

  • LaserJet 4700dn Always prints from Tray 1 (Manual Feed)

    I have a networked LaserJet 4700dn in a lab environment that recently has starting trying to print all jobs on the manual feed Tray 1.  I cannot find a way to reset this to use Tray 2 as the default tray.  I have checked all the OSD settings and used the web interface to attempt to rectify this.  I have installed the latest firmware and driver package on my test computer with no luck. I have read threads here for different printer models with the same issue but the solutions given are not available for the 4700 printer.
    TIA

    The problem for me was that the paper tray setting slipped back from LTR to A4. Take out the paper tray and make sure the arrow is aligned with LTR.

  • I am not able to create database manually.unexpected error incountered why?

    I am not able to create database manually.unexpected error incountered why?
    Same step is worked in another system
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area 97589952 bytes
    Fixed Size 453312 bytes
    Variable Size 46137344 bytes
    Database Buffers 50331648 bytes
    Redo Buffers 667648 bytes
    SQL> ed
    Wrote file afiedt.buf
    1 CREATE DATABASE icici
    2 LOGFILE GROUP 1 ('F:\oracle\oradata\icici\logfile\redo01.log') SIZE 10M,
    3 GROUP 2 ('F:\oracle\oradata\icici\logfile\redo02.log') SIZE 10M,
    4 GROUP 3 ('F:\oracle\oradata\icici\logfile\redo03.log') SIZE 10M
    5 MAXLOGFILES 5
    6 MAXLOGMEMBERS 5
    7 MAXLOGHISTORY 1
    8 MAXDATAFILES 10
    9 MAXINSTANCES 1
    10 CHARACTER SET US7ASCII
    11 NATIONAL CHARACTER SET AL16UTF16
    12 DATAFILE 'F:\oracle\oradata\icici\datafile\system01.dbf' SIZE 100M REUSE
    EXTENT MANAGEMENT LOCAL
    13 DEFAULT TEMPORARY TABLESPACE tempts1 TEMPFILE 'F:\oracle\oradata\icici\d
    atafile\temp01.dbf' SIZE 100M REUSE
    14 UNDO TABLESPACE undotbs DATAFILE 'F:\oracle\oradata\icici\datafile\undot
    bs01.dbf'SIZE 100M REUSE
    15* AUTOEXTEND ON NEXT 5120K MAXSIZE 300M
    SQL> /
    CREATE DATABASE icici
    ERROR at line 1:
    ORA-01092: ORACLE instance terminated. Disconnection forced
    SQL>

    Check the alert log. Paste the end of the file over here.
    Yoann.

  • Custom size manual feed?

    Why do envelopes default to a manual feed, but custom sizes pull from the main paper tray? Can you change which feed type the custom size defaults to?
    I have a Lexmark E234n mono laser printer which works just fine. I like to print odd sized stuff, though, like bank deposit slips, envelopes and index cards. Usually, I call up a #10 envelope in Page Setup, and format my page to stay within the actual paper. When I print, the printer defaults to the manual feed slot, and patiently waits for me to insert the envelope.
    Today, I got the bright idea to create a custom paper size for 4x6 index cards. Pages formats the page fine, of course. But, when I print, it pulls from the main tray instead of waiting for a manual feed.
    Logically, wouldn't most people who make a custom size use the manual feed slot? That is the input method for irregularly shaped items after all, and the main tray is usually filled with normal sized paper.
    Any printer-fooling workarounds would be much appreciated!
    rcarbaugh

    Peter:
    The "where to print" dialog takes place in the print menu, not the page setup. So, even in a template, the print dialog follows the last file printed, rather than any data in the template.
    There are a couple of ways to make it happen, but they are "workarounds" for the issue. I can do that, of course; I have been using workarounds since my Mac Plus. The answer I am looking for is why does the printer know when you select an envelope page setup, but not when you select a 4x6 card setup. There is a difference in the page setup, and I would like access to it, if possible.
    You may be right, though, about it being in the driver from the printer mfr. If that is the case, there is probably not much hope for a complete solution. It used to do it in my GCC laser, too, if I recall correctly.
    Thanks.
    rcarbaugh

  • Printer Driver Problem?  Page margins shift when using paper tray vs. manual feed

    I am printing to an Apple LaserWriter 12/640 PS. The printed page and page margins are PERFECT (WYSIWYG; "What you see is what you get") when printing either to: (a) the MANUAL FEED TRAY of the Apple LaserWriter 12/640 PS; or (b) PDF to view on screen.
    HOWEVER, when printing to the LaserWriter using the (ordinary/usual) paper cassette (you know, the thing that holds the 200+ sheeets of blank paper), two margin problems occur: (1) the uppermost portion of page content is shifted down 3/4" (maybe closer to 11/16") vs. its position on the manually fed paper.  This, in turn, causes the botttom portion of the page content to run off below the printed page.  (2) The "unprintable region" on the right edge of the paper expands from 1/8" with the manually fed paper to 7/16" when using the paper cassette.  This shows up as an extra 5/16" (7/16" - 1/8" = 5/16") of white space/missing page content on the right edge.
    The problem is consistent and reproduceable.  It happens with cassette fed output from Safari, Word 2011, Acrobat X, TurboTax, Quicken Essentials for Mac, and TextEdit.
    BIG problem when printing long documents whose content and margin settings I cannot control (e.g., third-party documents from Acrobat, anything from Quicken Essentials or TurboTax, pages from Safari, etc.).  The only workaround is to feed everything manually (UGGH!).
    I suspect the printer driver is faulty since the problem detailed above happens with so many applications.  Is there a way to edit a plist (using the application/utility "Pref Setter" or similar) to overide the driver's margin settings?
    I believe the print driver is "Apple LaserWriter 12/640 PS v2015.105" (from Sytem Prefences->Print&Scan->Options and Supplies->Driver).
    Any help greatly appreceated.

    Thanks!  It works perfectly!  I even saved my original "oversize" document by printing it to PDF with the scaling so the problem is permanently cured, at least for this document.

  • I keep getting a "We had difficulty downloading episodes from your feed" error.

    I've been trying to post a podcast, but I keep getting a "We had difficulty downloading episodes from your feed"  Error message.  The RSS feed I created is http://feeds.feedburner.com/blogspot/mjBrW.  Any help would be appreciated.

    Your feed is now OK and can be subscribed to in iTunes, so that's a start. However your media file itself is not accessible. The URL for it in the feed is
    http://feedproxy.google.com/~r/InTheFace/~5/B6E3DAcZCXU/InTheFaceEpisode1BadGran dpa.mp3
    This redirects to
    http://a1.podbean.com/646726/InTheFaceEpisode1BadGrandpa.mp3?AWSAccessKeyId=AKIA JLA6NPUL6BLALQ2A&Expires=1385103002&Signature=l4iImb8F5UB%2FZzo9gAmzyXwM%2FBc%3D
    And this brings up
    <Error>
    <Code>AccessDenied</Code>
    <Message>Request has expired</Message>
    <RequestId>D2B711C098C2AF2E</RequestId>
    <Expires>2013-11-22T06:50:02Z</Expires>
    <HostId> /vxmBjlZGuT2p5gdqXe51JV90o9Ep08YLQWJVW10bn17PUBcRyX85n/FL0K0qqnc</HostId>
    <ServerTime>2013-11-22T07:33:36Z</ServerTime>
    </Error>
    Basically the file is requiring authorization to access, so you have to turn that off.
    As to https, the iTunes Store cannot access media files with this prefix, and many podcast creation services will not create the enclosure tag if it's in use.

  • The infamous "We had difficulty downloading episodes from your feed" error

    Hi all,
    I'm trying to submit a podcast to iTS, but it's failing with the infamous "We had difficulty downloading episodes from your feed" error.
    The feed validates (here and here); all the tags that are suppossed to be there are there; the enclosures are there and readable; the server accepts byte-range requests.
    Could someone smarter than I have a glance over and see if they can spot anything?
    A sample feed can be seen here.
    Many thanks.

    I would ask one simple question - Why are you not just releasing your episodes as .mp3 format?
    The recommended encoding for audio podcasts is:
    .MP3 - format
    64 kbpb - Bit Rate
    44.1 khz - sample rate
    mono or joint stereo
    This gives good audio quality at the size of 0.5 mb per minute.  It is used by most of the big shows in iTunes and it compatible with all players and aggregators.
    Trying to trick the system to use a non-standard format is likely going to cause you issues - it is best to go with the settings above if you want the least amount of issues for you and your potenital listeners.
    Rob W

  • How to fix the 'We had difficulty downloading episodes from your feed' error

    I'm getting the error 'we had difficulty downloading episodes from your feed' error but I can subscribe directly to the rss feed via File>Subscribe to Podcast.
    The rss feed is: http://ithinkyouthink.libsyn.com/rss
    I've used feedvalidator and it says everything is good except for some minor suggestions. How do I fix this? I'm waiting on Libsyn to contact me directly, but I figured I'd try this to see if anyone could help.

    This is a bug in the iTunes submission system where it gives a false negative.  Libsyn servers are 100% compliant with iTunes.
    Please submit again - it usually will go through the second time.  If not wait 10 minutes and submit again.
    Apple is aware of this issue - but it has been around for a while.

  • "Difficulty downloading episodes from your feed" error

    There seem to be a lot fo threads like this, but none of the problems are quite the same. I've got a self-hosted wordpress site, and a soundcloud account.
    I applied for the podcasting beta from soundcloud, and the RSS they provide is here. If I add that feed to itunes, it says "The feed has no episodes."
    So I said fine, I'll host the .mp3s on archive.org, so I did that, and got the wordpress plugin "Seriously Simple Podcasting," set it up including links to the mp3 files hosted on archive put at the top, the RSS feed for that is here. When I punch that in to itunes, it gives me the "we had difficulty downloading episodes from your feed" error. So I tried to use feedburner, (feed here) either to syndicate the seriously simple podcasting feed, or to syndicate the feed from my wordpress site directly (without the plugin). I've also tried plugging that last feed directly into itunes w/o feedburner, in all cases, I get the "difficulty downloading episodes..." error.
    Very confused. I'm guessing there's something wrong with the way that the services (the SSP wordpress plugin or feedburner) is trying to make enclosures out of the mp3 hosted at archive, but I have no idea how to fix that. Any help would be greatly appreciated.

    DO NOT use the souncloud RSS feed - if you ever decide to leave them you will loose all your audience.
    They do not provide the tools needs to change your feed to a new host.
    You can't add in the iTunes new feed tag nor can you add in a redirect.
    What ever your do - do NOT use the soundcloud RSS feed.
    Regards,
    Rob W

Maybe you are looking for