Create AP_INVOICE_LINES entry programatically via interface?

Hi,
is there a public or private API/interface that supports creating a new invoice line (ap_invoice_lines + distribution + ...) entry for an existing invoice?
I tried fiddling with the open interface (AP_INVOICES_INTERFACE/AP_INVOICE_LINES_INTERFACE,ap_import_invoices_pkg) but to no avail :-(
Thanks
Christoph

Thanks for the helpful examples, but:
skimming through the code I think that it will import an invoice header + line.
The invoices I want to add lines to are already imported/comitted so I don't need a header. Calling the interface processor for an existing invoice gives me a DUPLICATE rejection (actual string might vary).
Since the first post I learned that the functionality changed significantly between releases so I have to add that I'm on eBS release 12.1.3

Similar Messages

CBAC: creating temporary entries in another interface?

Hi,
I am trying to understand the example at http://www.cisco.com/en/US/docs/ios/sec_data_plane/configuration/guide/sec_cfg_content_ac.html#wp1002224 in which the "ip inspect" command is applied to Ethernet 1/0 but the document says that the dynamic temporary entries will be created in the ACL 100 which is applied to another interface (Etherent 1/1). Is this true? I am under the impression that "ip inspect ... in" will add entries to the outbound ACL for the same interface, while
"ip inspect ... out" will add entries to the inbound ACL for the same interface.
Thanks in advance!

Hello Ka,
You do not need it, as soon as you have the inspection the returning traffic that matches the connections being inspected by CBAC will be allowed and will overwrite any ACL denying that traffic.
I think its a way to see things because as an example:
Inside------Router----Outside
Lets say you have an ACL denying all traffic on the outside interface inbound direction, with CBAC configure on the inside for outbound TCP connections, all the TCP traffic returning for a connection that matches the traffic being inspected will be allowed ( so yes a temporary entry will be added to the inbound ACL on the outside interface.
That is the whole purpose of CBAC ( A stateful firewall)
Regards,
Julio

"Buffer table not upto date" while creating Service entry via BAPI

Hi All,
I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further processing. I have checked the relevant threads for this message but since there is no SRM involved, I couldn't track the exact solution.
Regards,
Garima

Hi ,
Please close all the applications and re-check your rquirement.
Also, check for any information from SM21 logs.
Some times, it can be due to program /report not correctly maintained.
Finally, Basis people need to validate & may re-start (cautios of Production system) system.
Regards
Nagaraju

How do I create a new schedule via the Metadata Navigator Web interface?

Hi All,
Just wondering if it is possible to create a new schedule via the Metadata Navigator Web interface? What security rights do you need? Is this even possible? I have logged in as SUPERVISOR and It still looks like I can't do it.
Thanks,
Erik

You can't. To create a new schedule, use the Operator or Designer tool.
Craig

Sales Orders not to be created for certain customers via legacy

Hi,
We have an inbound interface from legacy into SAP which creates Sales Orders in SAP. But we have a requirement where the business does not want sales orders to be created for certain customers in SAP via the interface.
To prevent the sales orders from being created for those customers via the interface, we have created entries in the look-up tables (Hope other projects also use lookup tables and are aware of what are look-up tables). But still the sales orders are being created in SAP for those customers via the interface.
What else should we do to prevent the sales orders from being created for those customers.
Thanks in advance.
Mick

Hi ABAP gurus, need your help on this one. Any help would be greatly appreciated.

Not able to create row in HANA via .create or ajax call (oData Services)

Hello Experts,
SYSTEM: AWS (Amazone Cloud with HANA SPS06), tunneling via VPN. My HANA-Studio is rev.70 with the "Kepler" addons. I´m the owner of this Schema and granted the necessary privliegues to the __SYS_REPO User.
The following issues when I try to add a row with SAPUI5 - GUI:
The following code are in the index.controller.js implemented and triggered by a button:
Further to the developer guide (SAPUI5....) there is a create Statement to add rows into the Table in HANA. I tried the following:
//Einfacher Datensatz welcher in die HANA geschrieben werden sollte:
var oModel = new sap.ui.model.odata.ODataModel
("..(censored)../BL_TI/2005/zaginfothek/Opportunities.xsodata", false);
var oEntry = {};
oEntry.id = 7777;
oEntry.LfdNr=1;
oEntry.Customer=2;
oEntry.Thema=3;
oEntry.Leadueber=4;
oEntry.Owner=5;
oEntry.MarketDeveloper=6;
oEntry.ThemenfokusnachBL=7;
oEntry.Industry=8;
oEntry.PDs=9;
oEntry.Revenue=0;
oEntry.Probability=1;
oEntry.ProbableRevenue=2;
oEntry.Start=3;
oEntry.Finish=4;
oEntry.Duration=5;
oEntry.Phase=6;
oEntry.Status=7;
oEntry.ATPDecision=8;
oEntry.Date=9;
oEntry.SupplyChain=0;
oEntry.Technology=1;
oEntry.Region=2;
oEntry.Kontaktquelle=3;
oEntry.CASStatus=4;
oEntry.Angebotsnummer=5;
oEntry.Archiv=6;
oEntry.Angebotabgelegt=7;
oEntry.LeadmeldunganSAP=8;
oEntry.ArtderAnfrage=9;
oEntry.tmstmp= "/Date(1390557603727)/";
//Instantzierung mit Anhang Opportunities
oModel.create('/Opportunities', oEntry, nullfunction(){
alert("Create successful");
 },function(e){
for (var property in e.d){
alert(property + "=" + e.d[property] + oEntry + "failed");
I get the following Errormessage:
ERROR: 2014-03-17 12:51:52 The following problem occurred: HTTP request failed501,Not Implemented,<?xml version="1.0" encoding="utf-8" standalone="yes"?><error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"><code/><message xml:lang="en-US">Feature not supported.</message></error> -
After this I tried it with an ajax call:
var aUrl = '..(censored)../BL_TI/2005/zaginfothek/Opportunities.xsodata/Opportunities';
//all in one ajax – Statement included and tried to create the row via POST:
jQuery.ajax({
method:'POST',
url: aUrl,
data: {"id": "7778",
"LfdNr" : "1" ,
"Customer" : "2",
"Thema" : "3" ,
"Leadueber" : "4",
"Owner" : "5",
"MarketDeveloper" : "6",
"ThemenfokusnachBL" : "7",
"Industry" : "8",
"PDs" : "9",
"Revenue" : "0",
"Probability" : "1",
"ProbableRevenue" : "2",
"Start" : "3",
"Finish" : "4",
"Duration" : "5",
"Phase" : "6",
"Status" : "7",
"ATPDecision" : "8",
"Date": "9",
"SupplyChain" : "0",
"Technology" : "1",
"Region" : "2",
"Kontaktquelle" : "3",
"CASStatus" : "4",
"Angebotsnummer" : "5",
"Archiv" : "6",
"Angebotabgelegt" : "7",
"LeadmeldunganSAP" : "8",
"ArtderAnfrage" : "9",
"tmstmp": "/Date(1390557603727)/"
contentType: 'application/json',
dataType: 'json',
success: function(e){
alert(e.response + "success");
error: function onErrorCall(jqXHR, textStatus, errorThrown){
alert(jqXHR.status);
alert(aUrl);
sap.ui.commons.MessageBox.show(jqXHR.status,
"ERROR",
"Error in calling Service" );
// return;
The last statement with ajax send me a success message back, but there is still no row added in the HANA.
Has anyone an idea what´s going wrong?
I woulb be happy for any hints, thanks
André

Hi Ben,
well I tried out your code and it works with an small correction of your insert:
save: function(){
 var oData = new sap.ui.model.odata.ODataModel('...censored.../BL_TI/2005/TEST_USER/Opportunities.xsodata', true);
 // New user panel
// var pnlUser = new sap.ui.commons.Panel({text: "User-Data"});
// var tfUserId = new sap.ui.commons.TextField({placeholder: "User-Id"});
// var tfUserName = new sap.ui.commons.TextField({placeholder: "User-Name"});
// var btnSave = new sap.ui.commons.Button({text: "Save"});
// pnlUser.addContent(tfUserId).addContent(tfUserName).addContent(btnSave);
// btnSave.attachPress(function() {
 var entry = {};
 entry.ID = "3"; //tfUserId.getValue();
 entry.USERNAME = "4"; //tfUserName.getValue();
 oData.create('/USER', entry, null,
 function() {
 alert("Create successful");
 function() {
 alert("Create failed");
Try to write your id instead of 3 -> "3" That was the only what I´ve changed.
Greetz,
André

Issue while creating ADF Table programatically

Hi,
I am trying to create a table programatically...And i implemented like below:
 RichTable phoneTable = new RichTable();
 phoneTable.setEmptyText("No Phone Details yet");
 getContactPhone(contactObj.getPhone());
 phoneTable.setValue(contactObj.getPhone());
// contactObj.getPhone() is a ArrayList<TelephoneBOD> in pojo Object...
// Which is taken from a Object returned from DataControl Method (Captured in pageFlowScope)
 phoneTable.setVar("row");
 // Add Columns
 RichColumn column = new RichColumn();
 column.setHeaderText("Type");
 column.setId("phoneType");
 column.setAlign("right");
 column.setWidth("100");
 // Set output.
 RichOutputText output = new RichOutputText();
 output.setValue("#{row.phoneType}");
 // Add output into column.
 column.getChildren().add(output);
 // Add column into table.
 phoneTable.getChildren().add(column);When i try to implement like this i am getting fllowing error:
popup:
ZIP_STATE_FAILED
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #2log:
Caused By: java.io.NotSerializableException: org.ieee.internal.ws.proxy.conf.types.TelephoneBOD
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1156)
 at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
 at java.util.ArrayList.writeObject(ArrayList.java:570)
 at sun.reflect.GeneratedMethodAccessor252.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:945)
 at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1461)
 at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1392)
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
 at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1338)
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1146)
 at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1338)
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1146)
 at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1338)
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1146)
 at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
 at org.apache.myfaces.trinidad.component.TreeState.writeExternal(TreeState.java:239)
 at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1421)
 at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1390)
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
 at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1338)
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1146)
 at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
 at org.apache.myfaces.trinidad.component.TreeState.writeExternal(TreeState.java:241)
 at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1421)
 at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1390)
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
 at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1338)
 at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1146)
 at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)I think this is happening because i am not serializing the object passing to Table. If this is the Reason.. How to serialize the object?
Or i am missing something in the code?
Thanks
Thoom
Edited by: User007 on Aug 31, 2011 1:47 PM
Edited by: User007 on Aug 31, 2011 1:47 PM

Thanks Timo.. for simple solution.
Actually.. TelephoneBOD is auto-generated on creation of web service proxy from web service.
I don't think.. updating those Java files directly is a best practice. Because they will be changing if there is any change in web service schema..
You think there is any other way to do so?
Thanks
Thoom

Can't create a new record via Import using Integration ID

I have custom object records (+Assets+) that includes data attributes from another custom object (+Acme Products+ - not the same as CRMOD Products object). I would like to create new Asset records that pulls data in from the Acme Products object via the Import process, but I cannot always use the "Acme Products: External Unique ID" field to connect the data because Products don't always get created externally, most are created directly in the user interface. I'd like to use the "Acme Products:Integration ID", but that field doesn't appear when I'm mapping the fields on Step 3. Is there another way to connect the data?
Edited by: user2320847 on May 27, 2011 3:14 PM

You could use web services. Post this question on the CRM On Demand Integration Development Forum.

I'm trying to find when I actually created an entry/event in my iCal.

I'm trying to find when I actually created an entry/event in my iCal.

So you previously turned on FIndMyiPod on the iPod in Settings>iCloud? That message sounds like you did not. Are you using the same Apple ID used in Settings>iCloud on the iPod?
- To find wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

User-Exit / Badi for ML81n (create service entry sheet)

Dear experts,
I am looking for a User-Exit / Badi for ML81n (create service entry sheet), which will enable me to compare its date with the referenced PO's item's delivery-date, befor saving , and send an error message (with no update) if the check is not OK.
Remark : I have tried MB_DOCUMENT_BADI but with no success because you can't send an error message from it.
Thank you
Yaacov

hi check below thread
User-Exit for Service Entry Sheet via ML81N?
regards
vijay

Create a virtual classroom via Adobe Connect 9 Web Services

Is it possible to create a virtual classroom via Adobe Connect 9 Web Services? I could not find a way in "Using Adobe Connect 9 Web Services" documentation.

The answer of Jorma Jenning is almost correct. I investigated it myself and finally made a working solution.
The trick is that virtual classroom does not have a special type, instead it is a "meeting inside trainings folder with the icon of virtual-classroom". Kinda strange logic and to add another level of hell the "trainings folder" is the one with the type "my-courses", so, finally, we get the the following workflow:
1. Call h-ttps://example.com/api/xml?action=sco-shortcuts and filter sco-s until you find one with the type="my-courses" and remember its sco-id — this will be your folder-id.
2. call h-ttps://example.com/api/xml?action=sco-update&type=meeting&icon=virtual-classroom&name=October All Hands Meeting
&folder-id=2006258750&date-begin=2006-10-01T09:00
&date-end=2006-10-01T17:00&url-path=october
The thing with icon is important.
Note that if you call report-my-training service immediately after sco-update you won't see this virtual-classroom. This is because the default permissions do not allow that. Add yourself to the user list via permissions-update and it will appear in your training list. This is different from creating virtual classroom from web interface as there you are added as a host by default.

Create Contra-Entry with FIDCCP01

I am currently creating an "interface" between a third party supplier -> XI -> R/3 FI.
Unfortunately, I am only passed across the single entry (credit posting), and I need to create the "contra entry/offsetting account" within the mapping. I have created a look up to obtain the reconciliation account to post to, but am unsure about how to create an additional single line entry to post this 2nd entry.
There could potential have upto 998 line items (which will be forced within the other software) which leaves me the single available line to create this entry.
Can someone point me in the direction of some literature that covers this, if possible, or give me some pointers on creating this additional entry? Will I use "constants" for this? and if so, how do I make sure only one entry is created and not an entry for each line item?
This maybe a basic question, but it has been four months since my training, and my first go at creating an interface in XI.
Regards
Barry Neaves

Hi,
The time infotypes 2XXX are not yet decoupled as per the standard infotype framework. Hence there are no decoupled classes delivered in standard.
Regards
Roy
SAP Labs

Error while creating a callable object - User Interface

Hello,
When i'm trying to create a callable object - User Interface in the guided procedure design time. i'm getting an error. An internal server error. This is happening while i'm trying to create a guided procedure with webdynpro's.
Is there any body who allready had somthing like this.
Greetings
Kurt

Hi Raja Akella,
I allready had the roles and my portal version is upgraded until SP8 and all the possible patches.
I get an internal server error when i want to create a callable object. specially when i want to create a webdynpro ( ABAP / JAVA).
In the visual administrator i get the following errors.
Error 1
Exception occured during processing of a Web Dynpro application: "com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.".
[EXCEPTION]
com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
 at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:640)
 at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponentInternal(IWDApplicationInfo.java:286)
 at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponent(IWDApplicationInfo.java:270)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.addWdappsElement(COConfigWDApp.java:646)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readWebDynproApps(COConfigWDApp.java:631)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readApplications(COConfigWDApp.java:308)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalCOConfigWDApp.readApplications(InternalCOConfigWDApp.java:190)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.initCreate(VSelect.java:306)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.onPlugFromDispatch(VSelect.java:174)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalVSelect.wdInvokeEventHandler(InternalVSelect.java:168)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
 at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)
 at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:178)
 at com.sap.tc.webdynpro.repository.persistence.xml.XMLPersistence.doReadVMO(XMLPersistence.java:126)
 at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.readVMO(RepositoryPersistence.java:356)
 at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.doFindRepositoryObject(RepositoryPersistence.java:598)
 at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.findRepositoryObject(RepositoryPersistence.java:170)
 at com.sap.tc.webdynpro.repository.model.Repository.findRepositoryObjectInternal(Repository.java:590)
 at com.sap.tc.webdynpro.repository.model.RepositoryObjectRelation$XMLGuidWrapper.getModelObject(RepositoryObjectRelation.java:462)
 at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.getCurrentLayerObject(RepositoryPersistence.java:702)
 at com.sap.tc.webdynpro.repository.model.Repository.getCurrentLayerObject(Repository.java:1483)
 at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.doMergeInheritedTarget(NonSharedRelationToOne.java:85)
 at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.mergeInheritedTargets(NonSharedRelationToOne.java:49)
 at com.sap.tc.webdynpro.repository.model.RelationToOne.getTarget(RelationToOne.java:93)
 at com.sap.tc.webdynpro.repository.model.AbstractRepositoryModelClass.getRelatedModelObject(AbstractRepositoryModelClass.java:234)
 at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:636)
 ... 39 more
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)(:main:, row=1, col=491) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
 at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:148)
 at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:166)
 ... 52 more
Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
 at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1566)
 at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1687)
 at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2792)
 at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259)
 at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:278)
 at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:340)
 at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
 ... 53 more
error 2
Processing HTTP request to servlet [dispatcher] finished with error. The error is: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
 at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:640)
 at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponentInternal(IWDApplicationInfo.java:286)
 at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponent(IWDApplicationInfo.java:270)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.addWdappsElement(COConfigWDApp.java:646)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readWebDynproApps(COConfigWDApp.java:631)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readApplications(COConfigWDApp.java:308)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalCOConfigWDApp.readApplications(InternalCOConfigWDApp.java:190)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.initCreate(VSelect.java:306)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.onPlugFromDispatch(VSelect.java:174)
 at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalVSelect.wdInvokeEventHandler(InternalVSelect.java:168)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
 at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)
 at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:178)
 at com.sap.tc.webdynpro.repository.persistence.xml.XMLPersistence.doReadVMO(XMLPersistence.java:126)
 at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.readVMO(RepositoryPersistence.java:356)
 at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.doFindRepositoryObject(RepositoryPersistence.java:598)
 at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.findRepositoryObject(RepositoryPersistence.java:170)
 at com.sap.tc.webdynpro.repository.model.Repository.findRepositoryObjectInternal(Repository.java:590)
 at com.sap.tc.webdynpro.repository.model.RepositoryObjectRelation$XMLGuidWrapper.getModelObject(RepositoryObjectRelation.java:462)
 at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.getCurrentLayerObject(RepositoryPersistence.java:702)
 at com.sap.tc.webdynpro.repository.model.Repository.getCurrentLayerObject(Repository.java:1483)
 at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.doMergeInheritedTarget(NonSharedRelationToOne.java:85)
 at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.mergeInheritedTargets(NonSharedRelationToOne.java:49)
 at com.sap.tc.webdynpro.repository.model.RelationToOne.getTarget(RelationToOne.java:93)
 at com.sap.tc.webdynpro.repository.model.AbstractRepositoryModelClass.getRelatedModelObject(AbstractRepositoryModelClass.java:234)
 at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:636)
 ... 39 more
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)(:main:, row=1, col=491) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
 at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:148)
 at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:166)
 ... 52 more
Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
 at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1566)
 at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1687)
 at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2792)
 at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259)
 at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:278)
 at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:340)
 at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
 ... 53 more
error 3
Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
Exception id: [00505691431B006F0000003E00000FE800041B45B87F7617]
thanks in advance
Kurt

Dialogue program to create/modify entries of ztable

hi experts,
i want to create a ztable. After creating the ztable i want to create an dialogue program using that dialogue program i have to create/modify entries of that ztable using text box and push button options.
can anybody having sample coding pls send me.....
thanks in advance,
ravi

Hi Ravi ,
Instead creating the Dailog Program u can creat the Table Maintanance Generator (TMG). Here u will have all the option of creation, deleting , modifying the record.
In se11 main screen go to utilities:-> Table Maintanance Generator .
here u have to enteg the Function group name and screen NO. system wil generate the dialog program for u to maintan the data in that table. Then go to T-CODE SM30 give the same table name and click on maintanance push button and maintain ur entries the table.
IF helpfull reward points
Anees
9886358645

I have two lists. The first is "Tasks", second is "Journal". I need a "Create Journal Entry" link in the Tasks list. How do I do that?

Let's say I have a Task named "Build SSIS for Duke Energy" and it has another column called Active. Now every day I look at my task list and If I worked on that task I want to create a Journal entry of what I have done. So from the Task
list I'd like a third column that calls the "Journal Entry" list's new form page and pass it in the ID of the task. I have found several TextToHtml scripts out there, but they have to be stored in a script library, and then sourced to a content
editor web part. The problem is they don't fire when I have my list grouped. In addition to, every time someone creates a new view, I have to go in and add the Content Editor web part, point to the script....
Any thoughts. It is the grouped view that really bug me.

Hi,
If you only want to add a hyperlink to create a Journal entry in the task list, I recommend to add a Hyperlink column in the task list and then create workflow to update the column.
You can follow the steps as below:
Open the task list, add a hyperlink column named Create Journal Entry.
Create a workflow associated to the task list, start the workflow automatically when an item is created.
Add actions as below:
Then when a task is created in the task list, the workflow will be stared automatically to update the “Create Journal Entry” column.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Create AP_INVOICE_LINES entry programatically via interface?

Similar Messages

Maybe you are looking for