System Status MSPT cannot set a user status

When creating a user status for PM orders (transaction OIBS) we have a user status WOM (waiting on material). The user status profile is assigned to the PM order Object type. We want the user status WOM to be automatically set when the system status MSPT is active. However, there is no business transaction for "missing parts" or "material shortage", etc. How can I get system status MSPT to set a user status automatically?

Marc,
If its not possible by business transaction, then you will need to develop something.
Its pretty straight forward by utilising user-exit IWO10009 and function module STATUS_CHANGE_EXTERN
PeteA

Similar Messages

Set a User Status for Quality Notifications only if they are "Activated".

Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?

Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status.

How to restrict manual setting of User Status?

Hi,
I have created an User Profile where a particular User Status is "set" based on the Business Transaction "Release".
However, we are also allowed to set this User Status manually without carrying out the Business Transaction "Release".
How do I restrict manual setting of those User Statuses that are "set" based on a Business Transaction?
Raj

Pete,
I did read that post. But it is about providing authorisation to set a Status for an User.
The case I am referring is, an User Status is auto set by a Bus. Trans Release. But I am also permitted to set the status transition manually. This way, Users tend to skip Releasing the Service Order. This is affecting upstream processes.
Is there a way where we can restrict manual setting of User Statuses that have to be normally auto set by Bus. Transactions?
Raj

BAPI/FM for setting the user status for the Project definition and WBS elem

Hi,
I have to set the User Status for the Project Definition and the WBS elements in that project.
The User status to be set is the same for the project and wbs elements.
Please let me know if there is any BAPI/FM to set the user status..
Thanks in advance.
Regards
Shiva

Hi Shkithija,
There is a dump encoutered in the form "PS_FLAG_GET_GLOBAL_FLAGS" for 'chk_precommit_ok' in the "BAPI_PS_PRECOMMIT".
But it is showing SY-SUBRC = 0 when used along with BAPI_TRANSACTION_COMMIT.
May i know what are input parameters we need to pass it to "BAPI_PS_PRECOMMIT".
Do you have any idea.
Please let me know
Regards
vishnu

Can I reset a non numbered user status based on a numbered user status?

Can I reset a non numbered user status based on a numbered user status?

Yes. Numbered status are mutually exclusive ie. succeding status resets previously set status.
My requirement is like this: I have 3 numbered status and 2 non numbered status. Lets say, the first numbered status & two numbered status are set at the begining. Now when I click the second numbered status, both the numbered status and two non numbered status should be automatically reset. Only numbered status is getting reset and not the other two.
Thanks
Edited by: Smartsoft General User on Jul 22, 2009 4:36 PM

Create APG ( approval granted) status in process order through user status

Dear Gurus,
My business requirement is to create APG ( approval granted) sytem status in process order through user status functionality, if possible.
This needs to be activated while creating process order itself. Any help is greatly appreciated.
Warm Regards,
Satish

As of this date, we have still not implemented a fix, but I did get some information from someone else who has.
I'll post his information here for all to see. Hope you find it helpful.
From: Joe
Yes we managed to do it.
After several false starts and CMOD/projects which suffered because only the default keys (for order number, aufpl etc) were in place and not the actual, we coded up the IN_UPDATE method in the WORKORDER_UPDATE badi. This gives us the final format after the DB save (but before the commit). The update of the STATUS using the SAP std function module was actioned successfully but the status profile was not actually passed through. We assumed that this was because of the update task - so we introduced an INSERT into JSTO instead (a bit naughty I know, but desperate needs etc). If you require anything more let me know.
Best Regards
Joe

Cannot set up users on iMac since I updated to 10.4.4. Please help!

I have just rebuilt 2 of my computers in my class room and when I start the computer up I only get the admin screen to log into the server. I cannot set up users in preferences. I can get online and connect to the server via admin but my students cannot log in with their own accounts. What have I done wrong?

Recently I updated to Leopard 10.4.6
You appear to confused with which which Mac OS you have; Leopard is 10.5
you mention: 10.6, 10.4 and 10.5
Click on the Apple menu > About this Mac this will show the actual Mac OS you have
I looked in applications on the harddrive and iwork version 4.0
There is no such version as "iWork 4"
open Keynote and go to Keynote > About Keynote
Provide the correct information and you will get a reply based on the correct software versions

How to set a user status (complete) when ever system status is set complete

Experts,
We have configured status profile and few user status (say open, pre-release, complete) and assigned the status profile to the item category(zxxx).
The problem we have is if we have a service order that is created with the item (item category zxxx) -- Say the header status is open and the item status is pre-release. Now end user comes and sets the header status to completed - then the item status is still set pre-release. It is not changing to complete as expected.
Yes, the Item system status is set to completed but not the user status. How do I configure to set a complete user status when the header and item system status are set to completed.
Thank you
Edited by: ram on May 4, 2010 8:51 PM

I am not sure if this can be "reverse engineered" in Status profile.
But here is some hint. You can use the BAdI CRM_ORDER_STATUS mehtod AFTER_CHANGE and actually break when the Header status is changed, and set the item status as desired.

Set a User Status depending on System Status

Hi,
I would like to activate a user status of the sales document depending on the Rejection Status.
Do you know how this could be done?
Thanks
Edited by: mforman on Feb 25, 2011 11:54 AM

I've created a Status Profile with the Object Types: Sales Order header and Sales Order item.
But I don't know which Business Transaction I should allow/set in order to get this status set once a rejection reason is assigned to an item.
Any suggestion? Or workaround?
Thanks

How to add new actions in customization setting of user status ?

Hii All
I am tring to use user status for blocking the creation of new breakdown notification if one breakdown ntification is already pending on it. I want to set equipment under Breakdown status on equipment when breakdown notification created on it, but when i check for setting the action in user status customization setting, cannot locate the create notification there action there & also cannot add the same in it.
Can any body tell me how new action can be added there??
Regards

Makarand Gurjar,
You won't be able to do this with user-statuses.
See your other [VERY similar post|Blocking of Equipment for Notification creation;
PeteA

PM order for set/reset user status

I have one requriement like this I need to update the user status for many operations of single PM order at a time when user sets or resets the status. Kindly let me know is there any function module or any bapi for this or can you suggest me how to proceed with the further actions to handle this.
thanks in advance for your help.

Hi Jaya,
Before i tell you the FM, there is something u must know about changing the user statuses in PM.
User statuses are sequential in nature. Eg, if current user status is 15 and you want to set the new status to 30, you must set it to 20, then 25 and then finally 30.
For this you must first fetch all the valid statuses for the PM order depending on its status profile.
Next, call the following FM repeatedly each time passing the next status number in sequence until you reach the desired status number:
'STATUS_CHANGE_EXTERN'.
Hope this is helpful.
Thanks,
Sonal

Config User Status to the Equipment Master User Status

All,
I created a user status profile and assigned the same user profile to a sales order item category and also an equipment master. I was hoping that when I created my sales order and selected a user status and then saved the order and also delivered and PGId the delivery. I was hoping since it's the same user status profile that my equipment master would get updated automatically but it didn't. Is there anyway to do this that anyone knows of without using a user exit? Thanks for any help in advance.

Hi,
For single equipment, there would be "n" number of PM orders. While doing MIGO, PM order status will be changed by automatic. Why do you want to change the Equipment Status? How do you want to change the status. Please elaborate your concern.
Regards,
Maheswaran.

Setting System status on assigning User status

We can change the user status by changing the system status ...
is there some work around to change a system status e.g REL on Setting a User Status .. ?
Please advise. Thanks

Hi,
I think this is possible using "Maintain Substitutions", but no sure. Try out once.
SRP0 - Project Systems -> Structures ->Operative structures -> Work Breakdown Structures (WBS) -> Maintain Substitutions.
Regards,
Punith.

Prevent User Status from being set by System Status

Hello,
I wonder if there is a standard way to prevent setting some User Status as long as activity network is not released.
Thanks in advance,
Best Regards.
Nir

Hi Nir,
Go through the link mentioned below,
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm
Once you have read it thoroughly create a user status. Dont forget to select the object types for which this user status should work. Once you have created the user status, in the business transactions list, for the transaction Release check the radio button under Forbidden. This should fulfill your requirement. When you assign this user status to a Network or an activity it should prohibit the release transaction.
Hope this helps.
Best Regards,
Gokul
Edited by: Gokul on Jan 14, 2010 9:53 AM

Cannot set status of Urgent Change after manual transport

Hi all,
We are usng CHARM in Solution Manager 7.1 for import to the SAP ECC (EHP6) systems.
I cannot set the status of the Urgent Change document (ZMHF) to status "To be Tested" after the transports were manually released and manually imported to the ECC QA system.
When I use action "Pass Urgent Change to Test", the system stopped with error "Not all task are yet released" and will not change the status .
Based, on the Task List log, the system started the release process although no transports were released.
Is there any way that I can update the status of the Urgent Change document to "To be Tested"?
I tried program CRM_SOCM_SERVICE_REPORT but still did not change the status.
Any suggestion?
Thanks,
Tess

Hi Venu,
have a look under System Administration - System Configuration -- Knowledge Management -- Configuration --Content Management -- User Interface -- Commands -- UI Command Groups -- StatemanagementGroup.
See Java class: com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementGroupCommand. Take the class and decompile this and everything needed around to understand how this class works.
Then you can choose to extend this CommandGroup to also have a command "Resubmit for Approval" or you can implement your own UI Command only for resubmitting (you will also have to activate your command (group) by settings within the configuration).
On the other hand, if all this is completely new to you, I'm a bit sceptical if the task isn't a bit too big as a first task on KM implementation topics...?
Hope it helps
Detlev

System Status MSPT cannot set a user status

Similar Messages

Maybe you are looking for