Create Archive splits one video into 3 parts -- why?

I'm finding that Final Cut Pro X can import video from my tape-based Canon GL2 with no problem for the most part. But when I choose Create Archive instead of importing, for a one-hour miniDV tape, the Archive typically shows up as two or three separate clips. This happens even with a one-hour video I just shot last week, as one continuous video. When I import the archive, I'm stuck with three separate clips that, when assembled in a project timeline, have an audible glitch where the breaks are. Anybody know what might be causing this, and what I can do about it (other than not use the Create Archive function)?

BenB wrote:
… Well, about that FAT 32 issue, as a retired IT engineer I can factually say no it doesn't. 1st, a Mac can not write files to a FAT 32 Windows format drive. Read, yes. Write, no.
you should tell Apple, e.g. in this article
http://support.apple.com/kb/HT3764?viewlocale=en_US&locale=en_US
fat32 is read/write for years.
using it on a daily basis.
or, ever noticed the formatting option in MacOS' DiskUtility?
ever used an out-of-the-box usb-drive? any manufacturer, any size? in 99% fat32 formatted, fully functional with MacOSX.
or did you mean ntfs?
… but as a 'retired IT engineer' … -
.... sorry, but I'm outa here.-

Similar Messages

Music app splitting one podcast into two - why?

I have a 4th gen iPod Touch running iOS 6.1.6 - newest available. I listen to podcasts through the standard Music app. For some reason I have one podcast that shows up as two on that app - even though they have the same name. AND in iTunes on my Mac it is a SINGLE podcast that contains all of the episodes - including the six that are split out on the iPod. No change in the stream location; no change in the podcast name; nothing different between the meta fields when you do "get info" on the podcasts. In that separate podcast on the iPod, there are 6 podcasts (un-played) from 2012. Everything in the "main" podcast that is un-played is 2013 or newer.
I done a lot of googling and can find nothing on split podcasts other than when the actual podcast changed its name or the stream location. This is not the case here.
Any ideas???

This thread helps you, at least Brian's answer:
https://discussions.apple.com/message/23507673
At least this was the resolution for me.

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

Split one IDoc into two IDocs ?

hello all,
I wanna split one IDoc into two IDocs in XI?
how can implement it?
plx give some suggestions.
thx in advance
best regards
Yaning
Message was edited by:
Yaning Liu

Yaning,
Please find the below blog for changing the ocurrences of IDOC
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Best regards,
raj.

Split long video into small 15 second clips

Hi, I have a long video (7 minutes) I would like to upload to Instagram. Since they only takes 15 second clip, I would like to split my video into small clips. How can do it easily with iMovie?
Thanks,
fireman

First, you may not need to spit the event clips at all. You can select short bits of the long event clip and drag it into your project as you wish.
Having said that, there are good reasons to split event clips. For example, the 75 minute movie may contain many logical events that you wish to split out by date. In this case, iMovie 11 can do it, but I would not recommend it. It is a slow process and is prone to error.
I would recomment that you use a free app called MPEG Streamclip from Squared Five (google it).
To use MPEG Streamclip, drag your long clip into MPEG Streamclip.
Then, move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then, FILE/EXPORT TO QUICKTIME (or FILE/EXPORT TO DV if it is DV). Then repeat until you have done this for all clips you want.
If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
When finished splitting your long clip, import into iMovie by using FILE/IMPORT...MOVIE

Splitting one column into 4 columns

Hi,
I want to split one column into 4 columns as shown below.
parameters
PanelPanel=MP01110201&YearYear=2013&Source=1&UserID=aad2779
PanelPanel=MP12100173&YearYear=2013&Source=1&UserID=aac6440
it should be display as
panel yearyear source userid
MP01110201 2013 1 aad2779
MP12100173 2013 1 aac6440
there will be thousands of rows in the column. Can anybody help how to split it as shown.The length may very from row to row
Thanks for your help.........
BALUSUSRIHARSHA

It is working...thank u very much... I found one more issue here
PanelPanel=MP01110201&YearYear=2013&Source=1&UserID=aad2779
PanelPanel=MP11100070&Source=1&PNR=2&YearYear=2014&UserID=ddc1535
PanelPanel=MP11101276&Source=1&YearYear=2014&PNR=2&UserID=ddc1565
I found 3 kinds of formats in the same column... I didn't observe the data carefully while posting the
question..sorry about that. In this case if we need to show as
panel yearyear source
userid
MP01110201 2013 1 aad2779
MP11100070 2014 1 ddc1535
MP11101276 2014
1 ddc1565
is it possible to filter like this? Should we use any case statement in query while we have diff formats
like this?
BALUSUSRIHARSHA

Help... Why did the dvd to ipod converter split one movie into 2 files?

I have a 80GB Video Ipod and I'm confused on why when I ripped a dvd using the dvd to ipod converter for mac program it split the dvd into 2 files.. Is there a way I can merge the files together so it is 1 file?.. I would apprciate any help or suggestions...
G3 Ibook.. 15, 40 and 80GB Video Ipods... G4 PowerMac Mac OS X (10.4.2)

Go to their support forum and ask-you will get a better answer from people who actually use the program.
It's not a paid for program is it?
A totally free program that rips and converts DVD's for Macs can be found here: http://handbrake.m0k.org/
Why would anyone on a Mac pay for a DVD rip program?

Splitting single video into multiple files - workflow improvements?

I regularly need to split a single video into multiple separate files that are used by other programs. I'm using Premiere Pro CS4 for a number of reasons including the ability to easily and accurately select a scene by individual frames, native audio and video effects/filters, and the ability to import and export various video types. I'm open to using other tools, but I haven't yet found one that is even close to Premiere Pro when it comes to accurately selecting split points.
I'm not a Premiere Pro expert. I have been doing this for about four months and have read many resources (books, forum posts, help guides) to refine the workflow I'm currently using. My question: does anyone know any improvements that might save me time/keystrokes.
Current workflow:
I've bound F8 to File > Export > Media
Import video file
Open in source monitor
Set In and Out points for scene in source monitor
Ctrl-drag from source monitor to Project Panel (creates a subclip)
Repeat 3 and 4 for all scenes/subclips
Select all subclips from Project Panel and drag to timeline
Set work area bar to first subclip in timeline by the following four keystrokes: Home, Alt-[, PageDown, Alt-]
Type F8 (File > Export > Media shortcut). Type output file name, click OK and the first subclip is put in the AME queue
For the remaining subclips, type: Alt-[, PageDown, Alt-], F8, output file name, OK and repeat until done
Any thoughts/ideas on workflow improvements?
Thank you!

Thank you Hunt.
For the sake of brevity, I didn't include all of the details about the various aspects of the projects.
Early on I was doing what you suggested and yes, it is a little quicker. I learned (painfully) a couple of months later that I sometimes have to go back and adjust the clips and this method (trim to timeline with no subclips) resulted in quite a bit of duplicate effort (to reobtain start/stop points). I've since learned that managing the "scenes" as subclips in topical bins allows me to go back and make adjustments, long after I've totally forgotten about the project content, without a lot of unnecessary reworking.

Splitting large video into smaller segments

Is there a way to split a large iMovie Captured event into smaller segments/clips.
Am attempting to convert my home videos ( Analog: 8mm) into iMovie clips.
Used a ADS Pyro that converts my composite signal ( RCA: Yellow+Red/White) to a digital signal via Firewire using the iMovie capture. However, this creates a single 2 hour file that takes approx 26Gb because there is now DV information.
I would like to (a) Break this into smaller segments/clips then (b) Change the date on these.

Download MPEG Streamclip, which is free, from Squared 5.
Drag your long clip into MPEG Streamclip.
To split your video, move the playhead to your desired in point and type i. Then move the playhead to your desired out point and type o. Then File/Export to DV.
For more tips, [see this post|http://discussions.apple.com/thread.jspa?threadID=2255575], especially numbers 9b and 9c

ICal splits one event into two, how do I fix this?

I have one weekly repeating event entered. For the first two weeks it shows up like normal, as one event. But two weeks later it splits that one event into two different side-by-side bubbles. I did not alter the event. Does any one else have this problem? How can I fix this?

That is because you are sharing an Apple ID.
On both phones go to:
Settings > Facetime > turn off iPhone Cellular Calls
I would also suggest you check here to make sure your husbands number is not checked on your phone or yours on his:
Settings > Messages > Send & Receive
Settings > Facetime
Otherwise you will get each others Messages and FaceTime calls.
I recommend that you each get your own Apple IDs if for nothing else than iCloud, iMessage & FaceTime.

PRE9: How to split one clip into two (or more) clips?

I can't believe this is so hard to do... But HOW?

You don't necessarily need to separate the file into individual clips. When you do a cut on the timeline, this is a virtual cut, leaving the original file untouched but determining what will appear in the output. You can split the clip into multiple pieces, delete the bits you don't want, add transitions, insert new bits, whatever you want, all without affecting the original file in any way. Once you're happy, you output a new file using the Share options, and you get a new video file, with your original files still untouched.
If you want to split your file into multiple individual files, you can use the sliders on the time scale, and export (Share) using the Share Work Area Only checkbox. If you're doing this for purposes of reassembly, it would be better to save the individual clips in as lossless a format as possible, the default AVI format taking considerably more space but not losing quality. Hint: the sliders can be positioned to the time marker using Alt-[ and Alt-]. Once you've done this, note that your original file will still be there, untouched.
There is also VideoRedo Plus, a cheap program which gives frame-accurate selection and allows rapid subdivision of a piece of footage. It doesn't re-render as PE9 would (this is where loss of image quality creeps in using compressed formats such as MPEG), copying the original frames. You can then reassemble the bits using your video editor.

How to split one video in 2 screens?

Hello,
I have been trying to do this for a while but I can't find the way. Hopefully someone here will know how.
I want to be able to split one movie in 2 screens. The movie is panoramic format (1440 x 480). I have done it in the past but using DVD players and a syncronizer, which is complicated and expensive.
Using a computer, what tipically happens is that, for instance using QT, it asks you to use one or another screen, but it won't play in both.
An example of what I mean can be found here (first image on the top):
http://www.digitaltigers.com/dual-monitors.shtml
This is easy with a picture, I would like to do the same with video. I have contacted that company and they advised me to talk to Apple saying is probably an issue with the video card.
I heard there is video cards for PC that will do it, does anyone knows of a card for the Mac?
Thanks
Mac Pro 2.66 Mac OS X (10.4.8)

Also, ideally I would like to connect 2 video
projectors to the computer and run the video in 2
screens.
If the projectors have VGA inputs you can use the Matrox DualHead2Go
<http://www.matrox.com/graphics/en/gxm/products/dh2go/home.php>
It will make the two projectors appear to the computer as one wide screen projector. You connect it to the computer's DVI port with a DVI to VGA adapter.
If the projectors are set to 1024 x 768, the computer will see a 2048 x 768 display.

Split one row into multiple columns

Hi,
Data in one CLOB column in a table storing with delimiter, ##~~##. Ex. ##~~##abc##~~##defgh##~~##ijklm##~~##nopqr (data starts with delimiter). Please help me to split the data into multiple rows like below and it should be in the same order.
abc
defgh
ijklm
nopqr
I am using Oracle 11g.
Thanks.

Thanks Hoek for your response. Before posting my question in the forum, I tried similar query. It is working with one character as delimiter.
with test as (select 'ABC,DEF,GHI,JKL,MNO' str from dual )
select regexp_substr (str, '[^,]+', 1, rownum) split
from test
connect by level <= length (regexp_replace (str, '[^,]+')) + 1;
Above query is giving correct result by fetching 5 rows. I have modified the query like below...
with test as (select 'ABC,,,DEF,,,GHI,,,JKL,,,MNO' str from dual )
select regexp_substr (str, '[^,,,]+', 1, rownum) split
from test
connect by level <= length (regexp_replace (str, '[^,,,]+')) + 1;
Above query resulting 13 rows and last 8 rows are nulls. Number of null rows are increasing, if I increase number of characters in delimiter. Could you please tell me how to avoid those null rows.
Thanks.

How to split one monitor into two, differently configured desktops

Hello,
I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
- one window/space on one side (say, on the left) of the screen would contain the document from top to bottom, with no dock bar on the bottom
- the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
Is this possible? Can anyone recommend an application or type of setup?
Thank you,
-celso

Looking for something like this?
You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
http://www.funk-isoft.com/index.php/display-maid

How to split one page into different frames in ADF?

Hi,
Can any one please guide me how to split a jspx into different frames.
i.e., left frame contains <af:panelSideBar> which contains multiple <af:commandMenuItem> s. And whenver we click on the one <af:commandMenuItem>, it has to show the corresponing page inside center frame in this page itself. Is it possible in ADF? Which component we need to use?
Can anyone guide me on this?
Thanks in advance,
Regards,
Suresh Kethireddy

You can use a combination of the ADF Faces 10.1.3 components like:
af:panelPage
af:panelSideBar
af:panelHorizontal
af:panelGroup
to organize the screen layout, but it is not the interactive splitter that the 11g product provides.
You can all all the 10.1.3 ADF Faces Components here:
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/tagdoc/core/imageIndex.html

Create Archive splits one video into 3 parts -- why?

Similar Messages

Maybe you are looking for