Create custom device driver package
Hello,
I'm working with LabVIEW 2014 + RT and FPGA addons.
I have to provide a real-time application to many customers.
This application is created and can be installed using MAX as User Component to run at startup. I created a CDF file to do this.
Our customer don't need to use LabVIEW. They just need the device drivers linked to our application.
Is it possible to create a custom device driver package in order to provide only needed device drivers ?
I would like to do something like the device drivers installer but only with a litle part of it in order to install automatically everything needed and not more to deploy my application using MAX.
Best Regards,
CFOE
Perhaps you could use the RAD tool (or a modified version of it - it's open source)? See here: http://www.ni.com/example/30986/en/
You can use it to create an 'image' of your RT controller which you can then use the tool to restore the image onto the device. There are also a lot of utilities in the System Configuration palette to help you do this.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets
Similar Messages
-
How Create Custom Device in CS4 DC?
I need to create a new device for a phone in development. Any
one know how to create a custom device profile? I've tried
duplicating a current device and editing the XML but it doesn't
show up in the Local Device Library.
Thanks,
Sonny>I need to create a new device for a phone in development.
Any one know how
>to
> create a custom device profile? I've tried duplicating a
current device
> and
> editing the XML but it doesn't show up in the Local
Device Library.
See if this helps
http://www.adobe.com/devnet/devices/articles/custom_profiles.html
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu -
Device driver package / loading device driver at the boot time
I have finished writing device driver. Now I have to make a package
for it and I dont know how to write files in package format.
Maybe there is another way to support to user installation tools.
I need my driver to be loaded every time boot is done at the boot time.
Is there any way to do this?
Any help would be appreciated.
[email protected]vcolonel wrote:
Have you got NTFS-3G installed? "sudo pacman -S ntfs-3g".
Then you can edit your /etc/fstab and do:
/dev/sdb1 /media/whatever ntfs-3g defaults,user,locale=en_US.utf8 0 0
thanks, vcolonel.
Yes, I have ntfs-3g installed. But although I edited fstab as you said, it couldn't mount the drive automatically.
I guess this problem is not caused by ntfs. Because it happens to ext4 and fat too.
And I found that the partition had been overwritten.
sudo fdisk -l /dev/sdb
Disk /dev/sdb: 120.0 GB, 120034122752 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441646 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x093be277
Device Boot Start End Blocks Id System
/dev/sdb1 16065 234436544 117210240 f W95 Ext'd (LBA)
/dev/sdb5 16128 234436544 117210208+ 7 HPFS/NTFS/exFAT
I don't know why and how it happenned. It should have only one ntfs partition.
Last edited by dannyking630 (2011-08-25 10:23:51) -
Has anyone created a device driver for the DG101 Programmable Delay Generator?
I am wondering if anyone has written a LabVIEW driver for the DG101 Programmable Delay Generator third party device?
I have looked at the instrument driver network and there is nothing listed there. The board comes with the source code for the device as well as a gui to run under windows but I am working on the PXI-8196 embedded controller running a RTOS so the .dll that comes with the board is not compatible. I have been on the phone and email with NI over the last 3-4 weeks trying to figure out how to import the .dll, how to wrap the .dll, and how to create a new .dll. I spoke with someone yesterday and they told me that I would have to write a register level interface driver to work with the board and that it is very difficult for even the most experienced person. They suggested I outsource it but I was just curious, seeing that this board belongs to a very small community of programmable delay generators, that someone may have written a driver that is available.
Thanks,
Tracy L.
Message Edited by Tracy L. on 09-19-2006 11:48 AM -
Hi everyone,
I'm trying to deploy a Windows Embedded Standard 7 (trial key at the moment) image in SCCM 2012 SP1 with a very simple task sequence.
I have a 'build and capture' and an OSD TS. I'm testing these on Hyper-V PCs and both work fine when i create stand alone media. The problem arrises when I try to deploy (or build & capture) with a bootable media;
The TS starts, formats the disk, applies the OS, Windows and network settings, Apply Device Drivers etc., but when it reboots into Windows
(or WES7 to be exact) it cant boot. The Windows Boot Manager reports a 0xc0000359 for storvsc.sys
And I can't figure out what's wrong. I will post the SMSTS log further down below. The SAME TS works fine when it's a stand alone media.
I have tried to:
- Apply the WIM manually (nothing wrong - boots fine)
- Create and apply driver package for the Hyper-V machines (from the MSI's Windows5.x-HyperVIntegrationServices-x86 and Windows5.x-HyperVIntegrationServices-x64)
- No dice
- Create a new boot image with the hyper-v drivers in it. No dice
- Google everything related I can think of.
I suspect it has something to do with the lines where it says:
"Failed to find a suitable device driver for device xxx”
It also has a couple of 401 errors when trying to get the packages, but it seems like it DOES end up getting the content.
Please help! What could it be?
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
SMSTS log key points are (the log is too long to post here):
401 - Authentication failure on request with anonymous access, retrying with context credentials.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
401 - Authentication failure on request with context credentials, retrying with supplied credentials.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/s3cap.inf to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\s3cap.inf
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vmbusvideo.cat to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vmbusvideo.cat
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vms3cap.sys to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vms3cap.sys
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Download done setting progress bar to 100
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) VerifyContentHash: Hash algorithm is 32780
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Installing driver "Microsoft Emulated S3 Device Cap"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Adding "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to Windows driver store.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting %SystemRoot% to "C:\WINDOWS"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "amd64"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Added list item with key value '1'
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Calling Package manager to add drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Command line for extension .exe is "%1" %*
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Set command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Executing command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Process completed with exit code 0
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Dism successfully added drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Successfully added "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to the Windows driver store.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Successfully installed driver "Microsoft Emulated S3 Device Cap".
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Entering ReleaseSource() for C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) reference count 1 for the source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA before releasing
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Released the resolved source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{57164F39-9115-4E78-AB55-382F3BD5422D}\{FD149E91-82E0-4A7D-AFA6-2A4166CBD7C0}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Intel 82443BX Pentium(R) II Processor to PCI Bridge'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Generic Monitor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{A9A0F4E7-5A45-4D96-B827-8A841E8C03E6}\{242FF919-07DB-4180-9C2E-B86CB68C8C55}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Numeric data processor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{35FA2E29-EA23-4236-96AE-3A6EBACBA440}\{2450EE40-33BF-4FBD-892E-9FB06E9214CF}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'CD-ROM Drive'.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Exiting with return code 0x00000000
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264)
In advance: Sorry...Hi,
0xc0000359 for storvsc.sys
Looks like Hyper-v Storage Controller driver issue.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Device Driver Issue - Please help
Hello All,
We are currently using SCCM 2012 SP1 for OS Deployment and i have been working on a HP elitebook 820 G1 and probook 650 G1. Both build successfully but do not install any device drivers.
I have downloaded the driver package from HPs website, extracted all the drivers (inf,sys,cat) and put them into 'one' folder, i then created a driver package and imported the drivers into the package and category.
In the task sequence i have created a 'apply driver package task' with the wmi query for this model, i have also tried disabling the 'auto detect drivers' so that it doesn't look into the DB.
So far i haven't had any luck and have been working on this for over a week.
I have looked at the smsts log on the workstation after the build and there are no errors relating to drivers.
Any help will be appreciatedHonestly it sounds like something isn't right with the WMI query. Can you confirm that your WMI query is correct? Open a command prompt on one of the computer models you are having issues with. Run "wmic csproduct get name" which will report back the computer
model as seen by WMI. Confirm that your WMI query would be valid based on that name. WMI queries that I have used...
Most manufacturers:
SELECT * FROM Win32_ComputerSystem WHERE Model like "<model name from WMI>"
Lenovo:
SELECT * FROM Win32_ComputerSystemProduct WHERE Version like "ThinkPad T510"
Jarvis
Blog:
http://verbalprocessor.com Twitter:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
The postings on this site are my own and don’t necessarily represent my employer’s positions, strategies or opinions. -
CiscoWorks LMS 3.2 device driver discovery problem
Hi,
We have many devices Cisco 3825 on our network. For some of them, the device driver is correctly discovered but not for others.
- Devices correctly discovered : cisco3825 : Cisco IOS Software, 3800 Software (C3825-ADVSECURITYK9-M), Version 12.4(5a), RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Fri 13-Jan-06 21:09 by alnguyen : snmp oid : .1.3.6.1.4.1.9.1.543
- Devices not recognized : cisco3825 : Cisco IOS Software, 3800 Software (C3825-ADVSECURITYK9-M), Version 12.4(15)T9, RELEASE SOFTWARE (fc5)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Tue 28-Apr-09 17:45 by prod_rel_team : snmp oid : .1.3.6.1.4.1.9.1.543
I didn't see any new device driver package on Cisco site.
Does somebody has an idea ?
Many thanks,
Fabien GIRAUDI'm not sure I clearly understand the problem. Are you saying that some 3825s are not being discovered by Common Services Discovery? If so, are they showing up as unreachable, or are they not showing up at all in the Discovery reports?
-
Execution of RT driver VIs in custom device
Hi All
I am building a custom device wherein I am expecting some user input.( user provides input on the main page of the custom device).
Once the input is provided , based on it i am reading specific data from file and creating channels and section.
Previously creation of channels and section i was doing in initailiazation code. But now As i am expecting user input i cannot create those channels in initialization(reason is before getting input channels will be created which i dont want. My channel creation depends on the user input ).
So this channel creation logic I am now writing in RT driver VI along with my main logic of reading and writing of channels. For this I just want to know when does exactly RT driver VI starts its execution ?
If the RT driver Vi starts execution after adding custom deivce in veristand and after giving the user input then my purpose will be solved.
I hope i have explained my question correctly.
Solved!
Go to Solution.The driver starts after the system definition is deployed. I don't think you can add channels in the driver VI. Nor do I think you want to, because you won't have an interface to them in the system definition. Without an interface to the channels, i.e. mapping, how will you get data into and out of them? I think your plan to create channels based on user input and config data is fine. I suggest you implement in the main page or in custom pages under the main page.
-Steve K -
OSD - Creating 1 Image with choice of Software & Driver Packages
I am kindda new to SCCM 2012. I was wondering if it is possible to have like 1 Windows 8.1 Image and when it is being deployed we get a prompt for choice of Driver and Application Packages. The reason is that we have different kind of laptops and different
requirements for software. It would be good to have a prompt where you can choose which Driver Package to deploy based on the hardware and choice of software package that depends of the user's department.Retrograde_PAK, a good majority of our software deployments occur based on our computer naming convention so having a decent naming convention would
be very helpful. I also create collections for all(most) of my software packages and am able to pull device records into their deployment collections based on membership queries again typically I leverage our naming convention but you could use any number
of things... AD location... Installed OS... basically anything that sccm has stored in its db for those records. then those collection are populated automatically based on those queries and the package is installed. -
Custom PCI Device Driver for Phar Lap
Hi all,
I have deployed Labview Real-Time to a compact-PCI card in a cPCI chassis (non-NI brand for several unavoidable reasons). I need to do high-speed communication with another card in the chassis at minimum rates of 20 MB/s read, 4MB/s write - but preferably much higher. After extensive testing, we believe that NI VISA is incapable of maintaining those speeds in our system, and it barely maintains half those (side note: the hardware is more than capable as we have deployed embedded software that easily achieved the desired data rates).
Another engineer is responsible for finding ways to optimize VISA. The purpose of this post is to explore the option of writing a custom kernel driver for Phar Lap 2013 in C to handle communication with the other card. I have experience in writing windows kernel drivers, but the NI documentation for Phar Lap is severely lacking in this area.
So the overarching questions are:
1- Is it possible to do this?
2- If so, is it possible to use LabWindows/CVI to do this?
Any and all input is appreciated. ThanksHi:
Yes, it does.
You need this driver for the PCI Device.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79371-2&cc=us&dlc=en&lc=en&... -
Create customized and managed msi package for software installation in gpo
Hello everybody,
I have a many users in a domain and need to install different software on systems ,but each software has it's own
configuration, for example we need to install internet download manager(idm) and want to check mark and define some options in menus .
what's the solution ? or which program is good to create msi package with custom details ?
thanks for replyHi Nima,
>>or which program is good to create msi package with custom details ?
Based on your description, we can try to use Orca.exe to customize .msi package.
Regarding this point, the following thread and articles can be referred to for more information.
Create custom .msi package from existing .msi
https://social.technet.microsoft.com/Forums/windows/en-US/6059d374-8cfc-4229-bca8-93a34aaff314/create-custom-msi-package-from-existing-msi?forum=itproxpsp
Orca.exe
http://msdn.microsoft.com/en-us/library/aa370557(v=vs.85).aspx
Customizing MSI packages with ORCA
http://www.frickelsoft.net/blog/?p=240
Besides, to use group policy to deploy software, the following article can be referred to as reference.
How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003
http://support.microsoft.com/kb/816102
Best regards,
Frank Shen -
Hi All,
It has been mentioned to be that it is possible to have both "Apply Driver Package" and "Auto Apply Device Drivers - PNP' " specified in the same task sequence, with some kind of logic specified that if the Apply Driver Package step does
not run due to the hardware wmi query not being valid then the 'Apply Device Drivers -PNP' will run instead. Vice-versa - if the "Apply Driver Package" wmi query is correct and driver package applied then the 'Auto Apply Device Drivers -PNP'
will not run and be skipped.
Is this possible ?
I can't seem to find any documentation or reference indication this can be done. :-(
Many thanks everyone..To add some info here, note that the end result of both tasks is the same. Neither actually *installs* drivers in any way. Both simply copy the drivers to the target system and inject them into the image being deployed where they are then available to Windows
Setup (which runs during the Setup Windows and ConfigMgr task) to install based upon the Windows Setup standard PNP detection.
Thus, using both task types, depending upon what is in the driver packages and what is detected by the OSD PNP detection (which differs slightly from the OS PNP which is far more complex and has been described as a "black art"), potentially injects
more drivers into the image potentially making more drivers available to Windows Setup. This could of course increase your deployment time.
I've thought about this approach before and it is technically valid, but I've never had to resort to it. I've always just made sure that the drivers packages are complete. If you're trying to address the scenario of hardware without a explicit driver package,
I could see it working but I could also see it causing problems because drivers are weird. In general, I would recommend always testing new hardware and anything not accounted for is considered unsupported.
Jason | http://blog.configmgrftw.com | @jasonsandys -
Create additional installer error code -12 file not found from device driver cd
I'm trying to build an installer for a project that includes several NI drivers - specifically NI-DMM. NI-SCOPE, NI-SWITCH, NI-845x, and a few others (MAX, DAQ, etc). When I build the software standalone (and only include the run-time engine), it works fine. However, when I try to build the installer with the additional installers (mentioned above), the build prompts me for device driver cds, and then fails. Specifically, it fails on the February 2006 Device Driver cd. The error is attached below.
I have tried
- repairing all the installations of the software mentioned
- using a new project and re-adding the files
- building the additional installers seperately (no source code installed)
- copying the driver cds to the harddrive and referencing them there when needed
The next step will be to reinstall all of those drivers from scratch, but I really would prefer not to. Does anyone have any ideas (or solutions) regarding this problem?
CDK_CreateNewWizard_Invoke.vi.ProxyCaller >> CDK_CreateNewWizard_Invoke.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> CDK_Engine_PromptForMissingDist.vi >> NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'NI-845x Software 1.0.1' from: C:\National Instruments Downloads\NI-845x\1.0.1\ to: C:\PTF\Builds\**********************<edited out>
Copying distribution 'National Instruments Device Drivers - February 2006, Disk 1' from: C:\National Instruments Downloads\DCD-Feb06-1\ to: C:\Program Files\National Instruments\Shared\ProductCache\
*** Error: Windows SDK function returned an error. (Error code -12)
The system cannot find the file specified.
*** End Error Report
Done building deploymentI have had this happen a lot espescially with LV 8.0 -8.20. What I had to do was take the device drivers CD and copy it to the and run the installation of the software from the copy on the hard disk.
When you build an exe with additional installers it looks at the last place that you installed the drivers from. Anyway it worked for me so it might work for you.
Joe.
"NOTHING IS EVER EASY" -
HP LaserJet Pro 300/400 (M375nw & M475dn) - Driver packages will not install
Hello all,
I need some assistance with a very persistent and frustrating issue trying to get driver software packages for our LaserJet M375nw & M475dn to install correctly. We are running Windows 7 Pro x64 on HP 8300 desktop PCs.
We have these printers printing properly via our print server and the proper .inf driver but need the ability to scan to the PC. I would like to install the HP-provided software packages (which include the Scan driver & utility) but am running into the error below.
"A problem occurred while preparing to install software to your system. Please restart your computer, and run this installer again. If the problem persists, please check the product support web site for your product."
I get this error at 80% in the "preparing to install" process. I am using the latest drivers from the website for each of these models (which actually use the same package). I have tried both the Full and Basic driver package with the same results.
We have these printers installed via a static IP on the Network, not USB. I am trying to install as a Local Administrator. UAC is disabled. The PC is fully updated and doesn't have much in the way of custom software. It has SCCM client, MS SQL Native Client, Google Earth, Adobe, Trend Micro AV, OnBase, Office 2007 and Chrome installed.
Here are some of the things I've tried w/o success:
Tried installing with latest drivers from HP website
Ran all Windows updates
Ran the Scrubber uninstaller provided in the package / Running "uninstall" executable from HP software
Disabled all non-MS startup programs/services in msconfig, disabled Antivirus, rebooted, tried to again
Restarting computer (many, many times between different troubleshooting steps)
Tried disabling "Smart Install" (though I think this only applies to USB connections)
Checked print spooler - it indeed is started/running properly
Uninstalled all HP-branded software
Can any of you offer some help please? I'm not sure what to try next.
Some other posts I've looked at w/ no success are:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-CM1410-Series-install-error/td-p/3960480/page/2
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02018709
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4208157&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03123997-9%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/laserjet-pro-200-error/td-p/2702269
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/laserjet-pro-400-color-MFP-m475dw-scanner-stopped-working-in/td-p/3109875
Thank you!!!
P.S. This thread has been moved from Laserjet to Multifunction and All-in-One. - Hp Forum moderator
This is soulsecur again. I have used the FileToEmail.exe Utlity in the Driver package to generate logs. I looked through the installer log (hpbcsiInstaller.log) and found the info below. Can someone please help me make sense of this error? 08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Entry. 08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Preload Driver INF file list count = 1
08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): INF File: ..\\hppasc19.inf
08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. name: ..\\hppasc19.inf
08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. m_installDriverInfFileName: ..\\hppasc19.inf
08:49:12.7343 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. isPrinterDriver: True
08:49:12.7343 Information DifxHandler.DriverPackagePreInstall(): Entry.
08:49:12.7343 Information DifxHandler.DriverPackagePreInstall(): Calling DIFxServiceClient.DriverPackagePreInstall(): file = ..\\hppasc19.inf
08:49:12.7343 Information DifxHandler.DriverPackagePreInstall(): Calling DIFxDriverPackagePreInstall(): file = ..\\hppasc19.inf
08:49:12.7343 Information DIFxServiceClient.WaitForInitialCreateChannel(): Checking to see if the Channel has been created.
08:49:12.7343 Information DIFxServiceClient.CheckStatus(): Checking status of Service
08:49:13.0643 Information DIFxServiceClient.FixChannel(): Channel appears to be ok
08:49:13.1424 !ERROR! DIFxServiceClient.DIFxDriverPackagePreInstall(): Caught Fault Exception
08:49:13.1424 !ERROR! DIFxServiceClient.DIFxDriverPackagePreInstall(): Exception Detail Message: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
08:49:13.1424 !ERROR! DIFxServiceClient.DIFxDriverPackagePreInstall(): Exception Message: DIFxService:IFxServiceDriverPackagePreInstall Logs:08:49:13.06 ServiceMarshaller PreInstalling inf: ..\\hppasc19.inf
08:49:13.06 ServiceMarshaller Calling DIFxAPI.DriverPackagePreInstall. INF File: ..\\hppasc19.inf, Flags = 2
08:49:13.1424 !ERROR! DIFxServiceClient.DIFxDriverPackagePreInstall(): DIFxService:IFxServiceDriverPackagePreInstall Logs:08:49:13.06 ServiceMarshaller PreInstalling inf: ..\\hppasc19.inf
08:49:13.06 ServiceMarshaller Calling DIFxAPI.DriverPackagePreInstall. INF File: ..\\hppasc19.inf, Flags = 2
08:49:13.1424 Exception
System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]] DIFxService:IFxServiceDriverPackagePreInstall Logs:08:49:13.06 ServiceMarshaller PreInstalling inf: ..\\hppasc19.inf
08:49:13.06 ServiceMarshaller Calling DIFxAPI.DriverPackagePreInstall. INF File: ..\\hppasc19.inf, Flags = 2 Void HandleReturnMessage(System.Runtime.Remoting.Messaging.IMessage, System.Runtime.Remoting.Messaging.IMessage)
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at HP.InstallManager.CSI.IDIFxServiceMarshaller.DIFxServiceDriverPackagePreInstall(String infName)
at HP.InstallManager.CSI.DIFxServiceClient.DIFxDriverPackagePreInstall(String infName)
DifxHandler.DriverPackagePreInstall => DIFxServiceClient.DIFxDriverPackagePreInstall => NLogLogger.HP.CommonTools.CSI.ILogger.LogError
08:49:13.2024 Information DIFxServiceClient.DIFxDriverPackagePreInstall(): proxy State: Opened
08:49:13.2024 Information DifxHandler.DriverPackagePreInstall(): DIFxDriverPackagePreInstall(): returned: -1
08:49:13.2024 !ERROR! DifxHandler.DriverPackagePreInstall(): DIFxServiceClient Preinstall failed: code = -1
08:49:13.2024 !ERROR! DifxHandler.DriverPackagePreInstall(): DIFxServiceClient Preinstall failed: Error string = Unknown error (0xffffffff)
08:49:13.2024 Information DifxHandler.DriverPackagePreInstall(): Returning: FinishedFailError
08:49:13.2024 Information DriverPDUEngine.DriverPackagePreInstall(): Returning FinishedFailError
08:49:13.2024 Information DriverPDUEngine.HandleDIFXAction(): Returning: FinishedFailError
08:49:13.2024 Information InstallManager.FireStatusEvent(): Firing Status event. Sender = Driver PDU Engine, Text = HP.InstallConfig.CSI.PDUEngineActionItem, Status = FinishedFailError
08:49:13.2024 Information PDUManager.get_PrepareToInstallPercentComplete(): m_stepCountPrepareToInstall = 26, m_numStepsPrepareToInstall = 32
08:49:13.2024 Information InstallManager.get_PrepareToInstallPercentComplete(): Prepare to install percent complete = 81
08:49:13.2024 Verbose CSIViewModel.PagePropertyChangedHandler(): >>>>>>> Property Raised - CurrentPercentage
08:49:13.2024 Verbose CSIPageViewModelBase.CheckForUserError(): Checking for User Error: - EventStatus: FinishedFailError -
Customized manufacturer driver cant be updated.
Hello, my computer is a HP p6642f with windows 7 64 bit OS. I need to update my graphics card for gaming, I have tried updating my graphics card from HP but the version my computer came with is the most recent version that HP provides, 8.15.10.2119 dated 20/04/2010. I dont know exactly what graphics card I have, my dxdiag says;
System
System Information
Current Date/Time: December-26-12 7:07:40 pm
Computer Name: OWNER-HP
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: p6642f
BIOS: 7/12/10 14:03:04 Ver: 6.12
Processor: Intel(R) Core(TM) I5 CPU 650 @ 3.20GHz (4 CPUs), ~3.2GHz
Memory: 6144MB RAM
Page File: 6649MB used, 5106MB available
DirectX Version: DirextX 11
Display
Device
Name: Intel(R) HD Graphics
Manufacturer: Intel Corporation
Chip Type: Intel(R) HD Graphics (Core I5)
DAC Type: Internal
Approx. Total memory: 1760 MB
Current Display Mode: 1680 x 1050 (32 Bit) (59 Hz)
Monitor: generic PnP Monitor
Drivers
Main Driver: igdum64.dll,igd10um64.dll,igdumd>
Version: 8.15.10.2119
Date: 20/04/10 9:18:38 PM
WHQL Logo'd: n/a
DDI Version: 10
Driver Model WDDM 1.1
What I need to know is what graphics card I have, what the most recent update is that will be compatible, and how to install the new version over the Customized manufacturer driver. Any help will be greatly appreciated. I received 2 games for christmas, DOOM 3 BFG Edition and Medal of Honor Warfighter Limited Edition. Neither will run and I suspect that updating my graphics card may fix both problems. When I try to load DOOM 3 BFG Edition I get the message:
'Unable to initialize OpenGl' followed by;
QA Timing INIT: 000124ms
D3BFG 1.1400 win-x86 Nov 9 2012 10:38:21
3192 MHz Intel CPU with MMX & SSE & SSE2 & SSE3 & HTT
5872 MB System Memory
-1284 MB Video Memory
Winsock Initialized
Found interface: {F9AFD013-48F7-493D-9C22-4B7CE725EA9F} Microsoft Virtual WiFi Miniport Adapter - 0.0.0.0 NULL netmask - skipped
Found interface: {79F8D309-CA49-4F2A-91FB-E5E15A263ED0} Realtek PCIe GBE Family Controller - 192.168.0.43/255.255.255.0
Found interface: {C4E9EFF8-DC43-4D3A-BD95-6E8012AB6738} 802.11n Wireless LAN Card - 0.0.0.0 NULL netmask - skipped
Sys_InitNetworking: adding loopback interface
doom using MMX & SSE for SIMD processing
enabled Flush-To-Zero mode
enabled Denormals-Are-Zero mode
------ Initializing File System ------
Loaded resource file _common.resources
Loaded resource file _ordered.resources
Loaded resource file _sound_pc.resources
Loaded resource file _sound_pc_gr.resources
Reading resource CRCs...
Current search path:
C:\Program Files (x86)\Steam\steamapps\common\DOOM 3 BFG Edition/base
C:\Users\owner\Saved Games\id Software\DOOM 3 BFG/base
file system initialized.
WARNING: Unable to open resource file maps/_startup.resources
----- Initializing Decls -----
Couldn't open journal files
execing default.cfg
couldn't exec D3BFGConfig.cfg
couldn't exec autoexec.cfg
----- R_InitOpenGL -----
Initializing OpenGL subsystem with multisamples:0 stereo:0 fullscreen:1
...registered window class
...registered fake window class
...initializing QGL
...calling LoadLibrary( 'opengl32' ): succeeded
X..WGL_EXT_swap_control_tear not found
display device: 0
DeviceName : \\.\DISPLAY1
DeviceString: Intel(R) HD Graphics
StateFlags : 0x8000005
DeviceID : PCI\VEN_8086&DEV_0042&SUBSYS_2A9C103C&REV_18
DeviceKey : \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
DeviceName : \\.\DISPLAY1\Monitor0
DeviceString: Generic PnP Monitor
StateFlags : 0x3
DeviceID : MONITOR\HWP2654\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
DeviceKey : \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
dmPosition.x : 0
dmPosition.y : 0
dmBitsPerPel : 32
dmPelsWidth : 640
dmPelsHeight : 480
dmDisplayFlags : 0x0
dmDisplayFrequency: 59
...calling CDS: ok
display device: 0
DeviceName : \\.\DISPLAY1
DeviceString: Intel(R) HD Graphics
StateFlags : 0x8000005
DeviceID : PCI\VEN_8086&DEV_0042&SUBSYS_2A9C103C&REV_18
DeviceKey : \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
DeviceName : \\.\DISPLAY1\Monitor0
DeviceString: Generic PnP Monitor
StateFlags : 0x3
DeviceID : MONITOR\HWP2654\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
DeviceKey : \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
dmPosition.x : 0
dmPosition.y : 0
dmBitsPerPel : 32
dmPelsWidth : 1280
dmPelsHeight : 720
dmDisplayFlags : 0x0
dmDisplayFrequency: 60
...created window @ 0,0 (1280x720)
Initializing OpenGL driver
...SetPixelFormat failed
Shutting down OpenGL subsystem
...wglMakeCurrent( NULL, NULL ): failed
...releasing DC: failed
...resetting display
...shutting down QGL
...unloading OpenGL DLL
Initializing OpenGL subsystem with multisamples:0 stereo:0 fullscreen:1
...initializing QGL
...calling LoadLibrary( 'opengl32' ): succeeded
X..WGL_EXT_swap_control_tear not found
display device: 0
DeviceName : \\.\DISPLAY1
DeviceString: Intel(R) HD Graphics
StateFlags : 0x8000005
DeviceID : PCI\VEN_8086&DEV_0042&SUBSYS_2A9C103C&REV_18
DeviceKey : \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
DeviceName : \\.\DISPLAY1\Monitor0
DeviceString: Generic PnP Monitor
StateFlags : 0x3
DeviceID : MONITOR\HWP2654\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
DeviceKey : \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
dmPosition.x : 0
dmPosition.y : 0
dmBitsPerPel : 32
dmPelsWidth : 1680
dmPelsHeight : 1050
dmDisplayFlags : 0x0
dmDisplayFrequency: 59
...calling CDS: ok
display device: 0
DeviceName : \\.\DISPLAY1
DeviceString: Intel(R) HD Graphics
StateFlags : 0x8000005
DeviceID : PCI\VEN_8086&DEV_0042&SUBSYS_2A9C103C&REV_18
DeviceKey : \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
DeviceName : \\.\DISPLAY1\Monitor0
DeviceString: Generic PnP Monitor
StateFlags : 0x3
DeviceID : MONITOR\HWP2654\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
DeviceKey : \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
dmPosition.x : 0
dmPosition.y : 0
dmBitsPerPel : 32
dmPelsWidth : 1280
dmPelsHeight : 720
dmDisplayFlags : 0x0
dmDisplayFrequency: 60
...created window @ 0,0 (1280x720)
Initializing OpenGL driver
...SetPixelFormat failed
Shutting down OpenGL subsystem
...wglMakeCurrent( NULL, NULL ): failed
...releasing DC: failed
...resetting display
...shutting down QGL
...unloading OpenGL DLL
Unknown command 'vid_restart'
Unable to initialize OpenGL
Shutting down OpenGL subsystem
...shutting down QGL
And when I try to load Medal of Honor Warfighter Limited Edition I get a window saying:
'DirectX device creation error' followed by;
Failed creating D3D device of at least version 10.0 on adapter "Intel(R) HD Graphics" with driver "Unknown". Error is DXGI_ERROR_UNSUPORTED ("Unsuported.").
This is typically casued by not having the minimum required DirectX support in the GPU.
For NVIDIA GPUs, DirectX 10.0 support is required.
For AMD and GPUs from other vendors, DirectX 10.1 support is required.
Ok, for Medal of Honor Warfighter it says my graphics processor doesnt support DirectX 10.1, but the fact is I have direct X 11 which contains everything that DirectX 10.1 contains. So I assume that DirectX or Medal of Honor Warfighter is looking at the name of my video card, comparing it to a list of compatable cards, my card having been customized by the manufacturer is not on the list, and so it refuses to try to load DirectX or Medal of Honor Warfighter? I dont know, if there is some other way to correct the problem that would be great, but I'd really like to update my video card. I have heard that updating a customized manufacturer driver can casue instability, but i'm willing to take the risk. If I cant get a solution to my problem here, I'd like to at least know what my graphics card model is other than just 'Intel(R) HD Graphics (core I5)' so that I can continue searching on my own.
This question was solved.
View Solution.Well, yes and no... the card requires 2 "physical slots" but only connects to one "electrical slot"... the PCIe x16 slot. Your computer has 5 expansion slots... one PCIe x16 slot, three PCIe x1slots, and a mini-PCIe x1 slot. The mini-PCIe x1 slot hosts the factory wireless card and it appears the the other four slots are empty. The GTX 550 Ti card would connect to the PCIe x16 slot and cover or hide the adjacent PCIe x1 slot. This is normal and designed to work like that. It just requires that the adjacent slot is empty.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Maybe you are looking for
-
Anyone know how to drag an angle of a image?
say if i load an image picture from file looks like this: [http://img294.imageshack.us/img294/3993/1111ru2.jpg] is that possible to drag any angle of it like this? [http://img294.imageshack.us/img294/5359/1112np5.jpg] i couldnt find a right method to
-
Command link not working for project on deployment as ear file
Hi Jdev team / Jheadstart team, Its a very strange problem i am facing .. I have two screen with the same VO showing the details records split in two pages ( Master/ details) it shows a table structure in the firts screen and on clicking through the
-
http://img.photobucket.com/albums/v481/ynk1121/trackpad.jpg I look in my system preferences and it seems they added two finger scroll! I'm sure it wasn't there a few weeks ago. It must have come with one of the recent system updates.
-
What is procedure to post payment without reference
Hi, I need to be able to post a negative payment in SAP without any reference to the original payment. I was wondering what the best procedure is for this? Thanks.
-
What is the key command for locating a bar and beat
I record myself and clients who want to continually locate and start playing at different bars and beats very quickly so I can punch them in to record. In Digital Performer I use the period key to type in the bar and beat and in Pro Tools I use the