Create Inspection Characteristics

Hello Gurus,
I'm developing a program to create Inspection Characteristics from a file (excel).
I'm using the BAPI <b>BAPI_INSPECTIONPLAN_CREATE</b> but i don't know how to fill the parameters.
Anyone can help me, please.
Thank in advance.

Kindly go to SE37.Enter the name of BAPI n then execute.
Click on each field coming and execute. This was you can test your inputs. You can also save your test data .
This will validate that ur BAPI is o.k n you can ask you Technical team to write a program n assign a transaction to it.

Similar Messages

How do you create Inspection Characteristics?

Hello there,
I had a question.. How do you create Master inspection characeteristics?
Is there a specific Tcode for this?
Are any other assignments needed for this?
Any help would be highly appreciated.
Sincerely,
Aji Kurian Mani

Hi,
You can create Master Inspection Characteristics ( MIC ) with T-code QS21 or use this path
SAP Menu-LogisticsQuality ManagementQuality PlanningBasic DataInspection Characteristics--Create(QS21)
1.Goto T-code QS21
2.Enter Plant & desired code for MIC,then Enter.
3. Here tick for Quantitative Characteristic or Qualitative Characteristic.
4.Maintain control Indicator,catalog,Inspection method,Status,short text,search field.
Then Assign MIC in inspection plan.
Regards.
Raja.

Inspection Characteristics specific to a customer

Hi,
Can anybody tell me about the following
1) Is it Possible to Create inspection characteristics specific to a customer IF Yes how can we .
Please tell the step by step procedure
2) How do we create inspection characteristics specific to a product
Regards,
Raj

1) Is it Possible to Create inspection characteristics specific to a customer IF Yes how can we .
Please tell the step by step procedure
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2004a166-0a75-2c10-0caf-dc63b76c68fe?QuickLink=index&overridelayout=true
2)How do we create inspection characteristics specific to a product
dependent characteristic spec in qp01

Add inspection characteristics to production order created via CO07

Hi, all.
We're creating production orders to perform production rework on assemblies using transaction CO07.
We have a requirement to inspect and make a usage decision on the reworked assembly.
Since there is no material at the header level for CO07 orders, the system isn't allowing us to do an inspection because it has no material master QA view to reference. Although the control key is marked for in-process inspection, the production order still won't allow it.
I can't add "unplanned inspection characteristics", not can I manually create an inspection lot using QA01.
Is there a way to manually force in an inspection for an operation on a CO07 order?
Thanks.
Sarah

Hi,
We cannot do a inspection for a production order unless it has material assigned to it and the material got QM inspection type relevant to that.
regards,
Lenin. A

How to progammatically get Inspection Characteristics from Inspection Plan

How do I programmatically get Inspection Characteristics from an inspection plan? I am currently getting inspection characteristics from inspection lots via a QM-IDI RFC call (QIRF_SEND_REQUIREMENTS_GET_DAT2), but if the Inspection Characteristic is not in an inspection lot, I don't get it via the RFC call. What BAPI/RFC/IDOCS mechanism can I use from an external subsystem (VB.NET app) to get inspection characteristics (Spec Limits, Target, Operation, Activity) associated with a material in an inspection plan?
Thanks,
Ed

The problem is the SAP system that my external subsystem (VB.NET application using QM-IDI) is interfacing with does not have inspection lots (and the customer is not willing to add inspection lots), so the QM-IDI RFC that I'm using (QIRF_SEND_REQUIREMENTS_GET_DAT2) does not return the inspection characteristics (spec limits, etc) that I require. My customer creates a reference (QP11) with inspection characteristics, then attaches the reference to a Material (QP01). When I try to get the inspection characteristics for the material via QIRF_SEND_REQUIREMENTS_GET_DAT2, I don't get the inspection characteristics because there is no inspection lot associated with the material and inspection characteristics.
The design is for my external subsystem to do the Material Inspection Characteristic valuation, and then send the valuation results back to SAP. Is there a way to get Material Inspection Characteristics and then send the results back given the SAP setup I described above?
Thanks,
Ed

Date format in Master inspection characteristics

Hi All
I have a requirement where my user wants to enter the date format in the master inspection characteristic. For example we want to add date of manufacture and the date of expiree as a inspection characteristics and during the results recording they want to enter this characteristics in a date format.
MY question is can we have a master inspection characteristic with a date format, if so what all the settings are required.
Please suggest.
Thanks,
Quantum.

>
quantum wrote:
>Can i use characteristics in the inspection plan instead of the master inspection characteristics. I am using Work bench transaction code CWBQM to create an inspection plan.
Direct characteristic you can't use in inspection plan. If you want to use characteristic in IP then create chara. (CT04), then assign this charac. as class chanr.(QS21) in MIC. Now you can use this MIC in inspection plan.
Hope this helps.
Thanks!!!

Creating inspection lot in REM

Hi
In REM(Repetitive Manufactruing) Scenario:
Is their any possibility to create an inspection lot.
1) At the first GR and no more at subsequent GR or;
2) at each GR?
Thanks in advance
Saravana

Hi kumar
if you want to create inspection lot for REM then following are the settings
1. inspection type 13 for inprocess check for repetative with task list selection
2. maintained inspection characteristics in rate routing for which you want to maintained inspection.like inspection point
3. Inspection creation by tcode MFPR which creates inpsction lot for your production version. manually,
Regards
Pravin

LSMW to Load - Equipment Task List/Operations/Inspection Characteristics

Hello Experts,
Any suggestions on standard LSMW load program for this. The Standard batch Input - 0470/IBIP program does not have the option to load Maintenance Package and Inspection characteristics.
Any other suggestions please.
Thanks

Hi Ananthram,
instead of using the standard batch input program, you could also create a new recording that performs exactly the tasks you need. Mark "Batch-input-recording" and click on Overview. From there, you can start recording your transactions.
I hope this helps and solves your issue.
Marc

Creating Inspection plan using BAPI

HI all,
I am using the FM 'BAPI_INSPECTIONPLAN_CREATE'. I am unable to update the Inspection characteristics as multiple entries. Its getting updated only the last item.
Expecting answer from the experts.
Ravi.

Hi,
you can check the BAPI_INSPECTIONPLAN_CREATE for the named purpose, the values you named are in the structure BAPI1191_CHA_C please read the BAPI documentation:
Functionality
You can use this function module to create inspection plans and all its subordinate objects.
You can create a key date view and the complete history of an inspection plan. It is useful to have a history when transferring data from external systems.
Example
You want to create an inspection plan with operations and inspection characteristics for key date 01.01.2000. Make an entry in the following tables for each object:
TASK
OPERATION
INSPCHARACTERISTIC
If you want to assign test equipment to the inspection characteristic in field ITEM_NO_OF_PRODUCTION_RESOURCE, you must have assigned this test equipment in PARAMETER PRODUCTIONRESOURCE.
Notes
If no error occurs during the transfer of data, the export parameters GROUP and GROUPCOUNTER contain the key for the task list created. A COMMIT WORK must be executed for writing data to the database.
All errors that have occured are logged in the export parameter RETURN. If there are inconsistencies, the inspection plan to be created is rejected
<b>Reward points</b>
Regards

Config settings for Decimal places in Master Inspection Characteristics

Hi,
can any body tell me where to do the configuration settings for decimal places in master inspection characteristics
i want my limits to be 1.234
i want 3 decimals after point
Regards,
Raj

Hi,
Please go through the below link.
http://www.freesaptutorial.com/how-to-create-master-inspection-characteristic-in-sap-qm-module/
While creating the MIC in QS21 after entering the control indicators you will get Quantitative data screen.
In that screen you can enter the decimal places, UOM, target, lower limits etc
Regards
Hari

Inprocess inspection characteristics missing

Dear all
i assigned 03 inspection to a material but forgot to assign inspection characteristics, lot has been created at the time of the creation of production order. now i want to do the inspection but there is no assigned characteristics. i have assigned characteristics to that material in routing but how to get the effect on that lot to get the characteristics without changing order
is there any option plz guide me

Dear Nasir,
You have to try to read the Production Order master data through Production Order --> Functions --> Read Master Data. This is the way you can reset your lot Because In process inspection lot is attached with Production / Process Order. Other wise cancel the production order and create the new one. I hope this will work.
Best Regards,
Ibne Khalil

Link between PRT and inspection characteristics in Rate Routing

I am creating an Z report to show the details of the PRT and the inspection carried out by the same.(inspection characteristics)
Suggest me any table link between two.

got the solution

QP01 - To Create Inspection Plant

Hi Associates and Consultants,
Have any one worked on T-Code QP01 to create a Inspection Plan Using BDC's or BAPI's.
If so please try to ping me.
Regards,
sg

Hi friend,
check the code
REPORT ZQMB_QP01_INSP_PLAN
NO STANDARD PAGE HEADING LINE-SIZE 255 MESSAGE-ID ZQMB_INSP_PLAN.
Description: Upload Program for Create Inspection Plan *
ABAP Name : ZQMB_QP01_INSP_PLAN *
Autor : Vanessa Noronha *
Type : BDC Program for QP01 Transaction. *
Module : QM *
Date : 17 January 2008 *
Transport : D01K948244 -- TR-BDC for QP01 *
Changes (internal Version: Documentation/Info on line level) *
Date Name internal Transp.No. Description *
-Version- *
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_TABDATA,
MATNR TYPE RC27M-MATNR, "Material No
WERKS TYPE RC27M-WERKS, "Plant
PLNNR TYPE RC271-PLNNR, "Key for Task List Group
KTEXT TYPE PLKOD-KTEXT, "Task list description
VERWE TYPE PLKOD-VERWE, "Task list usage
STATU TYPE PLKOD-STATU, "Status
SLWBEZ TYPE PLKOD-SLWBEZ, "Identification for the Inspection Point Field Combination
QPRZIEHVER TYPE PLKOD-QPRZIEHVER, "Sample-Drawing Procedure
END OF TY_TABDATA.
TYPES: BEGIN OF TY_TBCTRL1,
MATNR TYPE RC27M-MATNR, "Material No
WERKS TYPE RC27M-WERKS, "Plant
PLNNR TYPE RC271-PLNNR, "Key for Task List Group
ARBPL TYPE PLPOD-ARBPL, "Work center
STEUS TYPE PLPOD-STEUS, "Control key
LTXA1 TYPE PLPOD-LTXA1, "Operation short text
END OF TY_TBCTRL1.
TYPES: BEGIN OF TY_TBCTRL2,
MATNR TYPE RC27M-MATNR, "Material No
WERKS TYPE RC27M-WERKS, "Plant
PLNNR TYPE RC271-PLNNR, "Key for Task List Group
ARBPL TYPE PLPOD-ARBPL, "Work center
STEUS TYPE PLPOD-STEUS, "Control key
VERWMERKM TYPE PLMKB-VERWMERKM, "Master Inspection Characteristics
PMETHODE TYPE PLMKB-PMETHODE, "Inspection Method
PMTVERSION TYPE PLMKB-PMTVERSION, "Version Number of the Inspection Method
STICHPRVER TYPE PLMKB-STICHPRVER, "Sampling Procedure in Inspection Characteristic
PRUEFEINH(7)," TYPE PLMKB-PRUEFEINH,
PROBEMGEH(3)," TYPE PLMKB-PROBEMGEH,
STELLEN(3), "TYPE PLMKB-STELLEN, "Number of Places to the Right of a Decimal Point (Accuracy)
MASSEINHSW TYPE RQPAS-MASSEINHSW, "Measurement Unit in Which Quantitative Data Is Maintained
SOLLWERT TYPE QFLTP-SOLLWERT, "Target Value for a Quantitative Characteristic
TOLERANZUN TYPE QFLTP-TOLERANZUN, "Lower Specification Limit
TOLERANZOB TYPE QFLTP-TOLERANZOB, "Upper Specification Limit
END OF TY_TBCTRL2.
TYPES: BEGIN OF TY_CHECK,
MATNR TYPE RC27M-MATNR, "Material No
WERKS TYPE RC27M-WERKS, "Plant
PLNNR TYPE RC271-PLNNR, "Key for Task List Group
END OF TY_CHECK.
Declaration of the Internal Table & Work Area.
DATA: ITST_TABDATA TYPE SORTED TABLE OF TY_TABDATA WITH
UNIQUE KEY MATNR WERKS PLNNR,
" Internal table for Non-Table Control Records
WA_TABDATA TYPE TY_TABDATA,
ITST_TABCTRL1 TYPE TABLE OF TY_TBCTRL1 , " Internal table for the First Screen with Table Control
WA_TABCTRL1 TYPE TY_TBCTRL1,
ITST_TABCTRL2 TYPE TABLE OF TY_TBCTRL2, " Internal table for the Second Screen with Table Control
WA_TABCTRL2 TYPE TY_TBCTRL2,
ITST_CHECK TYPE TABLE OF TY_CHECK, " Internal table to check if record already exists
WA_CHECK TYPE TY_CHECK.
Constants
CONSTANTS: C_QP01 TYPE CHAR4 VALUE 'QP01', " Transaction Name
C_A TYPE CHAR1 VALUE 'E', " Mode
C_S TYPE CHAR1 VALUE 'S'. " Status
Global data Declaration
DATA: GV_YEAR(4) TYPE C, " Year part for Date
GV_MNTH(2) TYPE C, " Month part for Date
GV_DATE(2) TYPE C, " Day part for Date
GV_DATUM(10) TYPE C, " Concatenated Date in dd.mm.yyyy Format
GV_ANS TYPE C, " Answer to Continue
GV_FLAG_NEW(1) TYPE N VALUE 0. " Flag to set if Inspection Plan exists.
Declaration of the Internal Table with Header Line comprising of the uploaded data.
DATA: BEGIN OF IT_FILE_UPLOAD OCCURS 0.
INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
DATA: END OF IT_FILE_UPLOAD.
Batch Input Data for a single Transaction.
Message of Call Transaction.
DATA: ITST_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE, " BDC Table
ITST_MSGTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE. " BDC Messages
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001,
BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
PARAMETERS: P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK B2,
END OF BLOCK B1.
E V E N T : AT S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = 'X'
CHANGING
FILE_NAME = P_FNAME.
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Upload Excel file into Internal Table.
PERFORM UPLOAD_EXCEL_FILE. " To Upload the Excel File
IF NOT IT_FILE_UPLOAD IS INITIAL.
Confirm whether you want to proceed with the Upload.
PERFORM CONFIRM_UPLOAD.
IF GV_ANS EQ '1'.
Organize the uploaded data into another Internal Table.
PERFORM ORGANIZE_UPLOADED_DATA.
Validate if already some Inspection Plan exists for that Material Plant
IF ITST_TABDATA[] IS NOT INITIAL.
SELECT MATNR
WERKS
PLNNR
FROM MAPL
INTO TABLE ITST_CHECK
FOR ALL ENTRIES IN ITST_TABDATA
WHERE MATNR = ITST_TABDATA-MATNR AND WERKS = ITST_TABDATA-WERKS AND
PLNNR = ITST_TABDATA-PLNNR AND PLNTY = 'Q' AND LOEKZ 'X'.
ENDIF.
LOOP AT ITST_CHECK INTO WA_CHECK .
LOOP AT ITST_TABDATA INTO WA_TABDATA WHERE MATNR = WA_CHECK-MATNR
AND WERKS = WA_CHECK-WERKS AND PLNNR = WA_CHECK-PLNNR.
IF SY-SUBRC = 0. " If exists SET FLAG = 1.
GV_FLAG_NEW = 1.
DELETE ITST_TABDATA WHERE MATNR = WA_CHECK-MATNR AND WERKS = WA_CHECK-WERKS
AND PLNNR = WA_CHECK-PLNNR.
DELETE ITST_TABCTRL1 WHERE MATNR = WA_CHECK-MATNR AND WERKS = WA_CHECK-WERKS
AND PLNNR = WA_CHECK-PLNNR.
DELETE ITST_TABCTRL2 WHERE MATNR = WA_CHECK-MATNR AND WERKS = WA_CHECK-WERKS
AND PLNNR = WA_CHECK-PLNNR.
ENDIF.
ENDLOOP.
ENDLOOP.
Kick-start BDC Operation
PERFORM F_START_BDC. " If answer is YES, then start BDC Operations
ENDIF.
ELSE.
LEAVE PROGRAM. " If answer is NO or CANCEL then leave program
ENDIF.
*& Form F_START_BDC
text
--> p1 text
<-- p2 text
FORM F_START_BDC .
DATA : LV_FNAM(20) TYPE C, " Concatenated field name
LV_IDX1(3) TYPE N VALUE 1, " Index For Table Control 1
LV_IDX2(3) TYPE N VALUE 1, " Index For Table Control 2
LV_GOTO(4) TYPE N , " Index for GoTo Line No incase of Page Down
LV_PG(3) TYPE N VALUE 1. " Index for Page No
IF ITST_TABDATA[] IS INITIAL.
MESSAGE E000. " If Inspection Plan exists for all items in file, show error message
ENDIF.
LOOP AT ITST_TABDATA INTO WA_TABDATA.
LV_IDX2 = '1'.
CLEAR ITST_BDCDATA.
REFRESH ITST_BDCDATA.
GV_YEAR = SY-DATUM+0(4).
GV_MNTH = SY-DATUM+4(2).
GV_DATE = SY-DATUM+6(2).
CONCATENATE GV_DATE '.' GV_MNTH '.' GV_YEAR INTO GV_DATUM.
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '8010'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RC27M-MATNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RC27M-MATNR'
WA_TABDATA-MATNR. " 'kiz0006c'
PERFORM BDC_FIELD USING 'RC27M-WERKS'
WA_TABDATA-WERKS. " 'B001'
PERFORM BDC_FIELD USING 'RC271-PLNNR'
WA_TABDATA-PLNNR. " 60000000-99999999
PERFORM BDC_FIELD USING 'RC271-STTAG'
GV_DATUM. " '16.01.2008'
IF GV_FLAG_NEW = 1. " If Exists then diff screen for clicking NEW ENTRIES tab
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RC27X-ENTRY_ACT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ANLG'.
PERFORM BDC_FIELD USING 'RC27X-ENTRY_ACT'
'1'.
PERFORM BDC_DYNPRO USING 'SAPLCPDA' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ELSE.
PERFORM BDC_DYNPRO USING 'SAPLCPDA' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ENDIF.
IF WA_TABDATA-KTEXT SPACE.
PERFORM BDC_FIELD USING 'PLKOD-KTEXT'
WA_TABDATA-KTEXT. " 'ZOLMITRIPTAN STAGE C1111'
ENDIF.
PERFORM BDC_FIELD USING 'PLKOD-VERWE'
WA_TABDATA-VERWE. " '5'
PERFORM BDC_FIELD USING 'PLKOD-STATU'
WA_TABDATA-STATU. " '4'
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLKOD-QPRZIEHVER'.
PERFORM BDC_FIELD USING 'PLKOD-SLWBEZ'
WA_TABDATA-SLWBEZ. " '200'
PERFORM BDC_FIELD USING 'PLKOD-QPRZIEHVER'
WA_TABDATA-QPRZIEHVER. " 'ACTIVE'
PERFORM BDC_DYNPRO USING 'SAPLCPDA' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=VOUE'.
LOOP AT ITST_TABCTRL1 INTO WA_TABCTRL1 WHERE MATNR = WA_TABDATA-MATNR
AND WERKS = WA_TABDATA-WERKS
AND PLNNR = WA_TABDATA-PLNNR.
ON CHANGE OF WA_TABCTRL1-MATNR OR WA_TABCTRL1-WERKS OR WA_TABCTRL1-PLNNR.
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1400'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLPOD-LTXA1(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
CONCATENATE 'PLPOD-ARBPL(' LV_IDX1 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL1-ARBPL. " 'qc01'
CONCATENATE 'PLPOD-STEUS(' LV_IDX1 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL1-STEUS. " 'qm01'
CONCATENATE 'PLPOD-LTXA1(' LV_IDX1 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL1-LTXA1. " 'opearation1'
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1400'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLPOD-VORNR(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=QMUE'.
PERFORM BDC_FIELD USING 'RC27X-ENTRY_ACT'
'1'.
PERFORM BDC_FIELD USING 'RC27X-FLG_SEL(01)'
'X'.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-STELLEN(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
LOOP AT ITST_TABCTRL2 INTO WA_TABCTRL2 WHERE MATNR = WA_TABCTRL1-MATNR AND
WERKS = WA_TABCTRL1-WERKS AND
PLNNR = WA_TABCTRL1-PLNNR.
AND ARBPL = WA_TABCTRL1-ARBPL AND
STEUS = WA_TABCTRL1-STEUS.
LV_GOTO = LV_PG * 140. " For Page Down on Second Table Control
IF LV_IDX2 >= 14.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RQPAS-AB_MKNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RQPAS-AB_MKNR'
LV_GOTO .
LV_IDX2 = 2.
LV_PG = LV_PG + 1.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ELSE.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-STELLEN(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ENDIF.
CONCATENATE 'PLMKB-VERWMERKM(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-VERWMERKM. " 'MIC00001'/ ' MIC00050'
IF WA_TABCTRL2-PMETHODE SPACE.
CONCATENATE 'PLMKB-PMETHODE(' LV_IDX2')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PMETHODE. " 'met00001'
CONCATENATE 'PLMKB-PMTVERSION(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PMTVERSION. " '1'
CONCATENATE 'PLMKB-STICHPRVER(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-STICHPRVER. " 'APIFX1'
CONCATENATE 'PLMKB-PRUEFEINH(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PRUEFEINH. " '20'
CONCATENATE 'PLMKB-PROBEMGEH(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PROBEMGEH. " 'G'
CONCATENATE 'PLMKB-STELLEN(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-STELLEN. " '2'
CONCATENATE 'RQPAS-MASSEINHSW(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-MASSEINHSW. " '%'
CONCATENATE 'QFLTP-SOLLWERT(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-SOLLWERT. " '10'
CONCATENATE 'QFLTP-TOLERANZUN(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-TOLERANZUN. " '5'
CONCATENATE 'QFLTP-TOLERANZOB(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-TOLERANZOB. " '15'
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '1501'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENT1'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-VERWMERKM'.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '1502'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENT1'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-PMETHODE'.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '1502'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENT1'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-PMETHODE'.
ELSE.
CONCATENATE 'PLMKB-PMTVERSION(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PMTVERSION. " '1'
CONCATENATE 'PLMKB-STICHPRVER(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-STICHPRVER. " 'APIFX1'
CONCATENATE 'PLMKB-PRUEFEINH(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PRUEFEINH. " '20'
CONCATENATE 'PLMKB-PROBEMGEH(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-PROBEMGEH. " 'G'
CONCATENATE 'PLMKB-STELLEN(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-STELLEN. " '2'
CONCATENATE 'RQPAS-MASSEINHSW(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-MASSEINHSW. " '%'
CONCATENATE 'QFLTP-SOLLWERT(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-SOLLWERT. " '10'
CONCATENATE 'QFLTP-TOLERANZUN(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-TOLERANZUN. " '5'
CONCATENATE 'QFLTP-TOLERANZOB(' LV_IDX2 ')' INTO LV_FNAM.
PERFORM BDC_FIELD USING LV_FNAM
WA_TABCTRL2-TOLERANZOB. " '15'
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '1501'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENT1'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'PLMKB-QMTB_WERKS'.
PERFORM BDC_FIELD USING 'PLMKB-VERWMERKM'
WA_TABCTRL2-VERWMERKM.
PERFORM BDC_FIELD USING 'PLMKB-QPMK_WERKS'
WA_TABCTRL2-WERKS.
PERFORM BDC_FIELD USING 'PLMKB-QMTB_WERKS'
ENDIF.
LV_IDX2 = LV_IDX2 + 1.
ENDLOOP.
ENDON.
ENDLOOP.
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RQPAS-ENTRY_ACT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=QMBU'.
PERFORM BDC_FIELD USING 'RQPAS-ENTRY_ACT'
'1'.
CALL TRANSACTION C_QP01 USING ITST_BDCDATA
MODE C_A UPDATE C_S
MESSAGES INTO ITST_MSGTAB. "#EC CI_CALLTA
ENDLOOP.
ENDFORM. " F_START_BDC
*& Form UPLOAD_EXCEL_FILE
text
--> p1 text
<-- p2 text
FORM UPLOAD_EXCEL_FILE .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FNAME
I_BEGIN_COL = 1
I_BEGIN_ROW = 2
I_END_COL = 19
I_END_ROW = 9999
TABLES
INTERN = IT_FILE_UPLOAD.
ENDFORM. " UPLOAD_EXCEL_FILE
*& Form CONFIRM_UPLOAD
text
--> p1 text
<-- p2 text
FORM CONFIRM_UPLOAD .
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = TEXT-002
TEXT_QUESTION = TEXT-003
IMPORTING
ANSWER = GV_ANS
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2.
ENDFORM. " CONFIRM_UPLOAD
*& Form BDC_DYNPRO
text
-->P_0589 text
-->P_0590 text
FORM BDC_DYNPRO USING PROGRAM
DYNPRO.
CLEAR: ITST_BDCDATA.
ITST_BDCDATA-PROGRAM = PROGRAM.
ITST_BDCDATA-DYNPRO = DYNPRO.
ITST_BDCDATA-DYNBEGIN = 'X'.
APPEND ITST_BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
text
-->P_0729 text
-->P_0730 text
FORM BDC_FIELD USING FNAM
FVAL.
CLEAR: ITST_BDCDATA.
ITST_BDCDATA-FNAM = FNAM.
ITST_BDCDATA-FVAL = FVAL.
APPEND ITST_BDCDATA.
ENDFORM. " BDC_FIELD
*& Form ORGANIZE_UPLOADED_DATA
text
--> p1 text
<-- p2 text
FORM ORGANIZE_UPLOADED_DATA .
DATA : LV_TOTROW TYPE I, " Total Records
LV_ROW TYPE I. " Row No
LV_TOTROW = 1.
SORT IT_FILE_UPLOAD BY ROW
COL.
LOOP AT IT_FILE_UPLOAD.
LV_TOTROW = IT_FILE_UPLOAD-ROW. " To find total rows
ENDLOOP.
LV_ROW = 1.
WHILE LV_ROW <= LV_TOTROW.
LOOP AT IT_FILE_UPLOAD WHERE ROW = LV_ROW.
CASE IT_FILE_UPLOAD-COL.
WHEN '0001'. " Material
TRANSLATE IT_FILE_UPLOAD-VALUE TO UPPER CASE.
WA_TABDATA-MATNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL1-MATNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-MATNR = IT_FILE_UPLOAD-VALUE.
WHEN '0002'. " Plant
TRANSLATE IT_FILE_UPLOAD-VALUE TO UPPER CASE.
WA_TABDATA-WERKS = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL1-WERKS = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-WERKS = IT_FILE_UPLOAD-VALUE.
WHEN '0003'. " Group Key
WA_TABDATA-PLNNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL1-PLNNR = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-PLNNR = IT_FILE_UPLOAD-VALUE.
WHEN '0004'. " Group Counter Desc
WA_TABDATA-KTEXT = IT_FILE_UPLOAD-VALUE.
WHEN '0005'. " Usage
WA_TABDATA-VERWE = IT_FILE_UPLOAD-VALUE.
WHEN '0006'. " Status
WA_TABDATA-STATU = IT_FILE_UPLOAD-VALUE.
WHEN '0007'. " Inspection Point
WA_TABDATA-SLWBEZ = IT_FILE_UPLOAD-VALUE.
WHEN '0008'. " Sample Drawing Procedure
WA_TABDATA-QPRZIEHVER = IT_FILE_UPLOAD-VALUE.
WHEN '0009'. " Work Centre
WA_TABCTRL1-ARBPL = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-ARBPL = IT_FILE_UPLOAD-VALUE.
WHEN '0010'. " Control Key
WA_TABCTRL1-STEUS = IT_FILE_UPLOAD-VALUE.
WA_TABCTRL2-STEUS = IT_FILE_UPLOAD-VALUE.
WHEN '0011'. " Desc
WA_TABCTRL1-LTXA1 = IT_FILE_UPLOAD-VALUE.
WHEN '0012'. " MIC
WA_TABCTRL2-VERWMERKM = IT_FILE_UPLOAD-VALUE.
WHEN '0013'. " Method
WA_TABCTRL2-PMETHODE = IT_FILE_UPLOAD-VALUE.
WHEN '0014'.
WA_TABCTRL2-PMTVERSION = IT_FILE_UPLOAD-VALUE.
WHEN '0014'. " Sampling
WA_TABCTRL2-STICHPRVER = IT_FILE_UPLOAD-VALUE.
WHEN '0016'.
WA_TABCTRL2-PRUEFEINH = IT_FILE_UPLOAD-VALUE.
WHEN '0017'.
WA_TABCTRL2-PROBEMGEH = IT_FILE_UPLOAD-VALUE.
WHEN '0015'. " Accuracy
WA_TABCTRL2-STELLEN = IT_FILE_UPLOAD-VALUE.
WHEN '0016'. " Unit
WA_TABCTRL2-MASSEINHSW = IT_FILE_UPLOAD-VALUE.
WHEN '0017'. " Target Value
WA_TABCTRL2-SOLLWERT = IT_FILE_UPLOAD-VALUE.
WHEN '0018'. " Lower Limit
WA_TABCTRL2-TOLERANZUN = IT_FILE_UPLOAD-VALUE.
WHEN '0019'. " Upper Limit
WA_TABCTRL2-TOLERANZOB = IT_FILE_UPLOAD-VALUE.
ENDCASE.
ENDLOOP.
LV_ROW = LV_ROW + 1.
INSERT WA_TABDATA INTO TABLE ITST_TABDATA .
APPEND WA_TABCTRL1 TO ITST_TABCTRL1.
APPEND WA_TABCTRL2 TO ITST_TABCTRL2.
CLEAR :WA_TABDATA,WA_TABCTRL1,WA_TABCTRL2.
ENDWHILE.
ENDFORM. " ORGANIZE_UPLOADED_DATA
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
Free all internal tables
FREE: ITST_TABDATA,
ITST_TABCTRL1,
ITST_TABCTRL2.
Regards,
Raj.

Create Inspection plan at once for many materials through QP01. Possible?

Dear Friends,
Is it possible to create Inspection Plant for more than one material at onece through QP01 when operation activity and Characteristics are same. I will change the Characteristics specifications afterwards.

As suggested in earlier reply you can assign multiple materials to one inspection plan.
But you may still need more than one plan because of
1. UOM is maintained in Inspection plan header. So you have to create different inspection plan if you receive materials in different Unit of measures.
2. Usage is also at header level, so depending on configuration, usage for 01 inspection type may be different from usage for 0101 inspection type.
If you like the user exit approach.
1. Create a dummy material and assign default inspection plan to this material.
2. In the user exit change the inspection plan assignment. Assign inspection plan from this dummy material.
Form us this was a very useful approach during testing or for new material where inspection plan was not created in time.
Once this default inspection plan is assigned, inspection lot is released even without inspection plan. If we need, we can always change the default inspection plan in QA02 transaction before RR
AK Marwadi.

Error while creating Inspection plan

Hi,
While creating inspection plan in QP01, system is showing error "Material type ZROH is not defined for task list type Q''
Please help me to solve the error.
Thanks
Prasant

Hi,
This is due to the configuration error,
Just use T.Code OP50
Create an entry for task list type "Q" with material type "ZROH" and save,
Then try creating a Quality Inspection Plan, it will work
Regards
Merwyn

Create Inspection Characteristics

Similar Messages

Maybe you are looking for