Create Operation with Integration Gateway for SOAP Webservices
Dear All,
Has anyone used the create operation for Soap Webservices for SMP 3.0 to invoke a POST into the system using OData and Integration Gateway.
Can you please help with the steps.
Thanks,
Best Regards,
Rakshit Doshi
I tried the same sometime back but faced some issues. Then i came to know about one known issue.
Reference
Rgrds,
JK
Similar Messages
-
Error when connecting an oracle DB with Integration gateway
I followed the steps from the blog How to connect an Oracle DB with Integration Gateway in SMP3 and the ojdbc was deployed successfully to SMP. Still, i'm getting "Driver class oracle.jdbc.driver.OracleDriver not found" error message when i try to test my connection. The first difference i saw when completing these steps was that I'm using SMP3 SP05, could this be the issue?
Joao D Franco Net
Could you share below information:
Can you cross check if deployed driver are OSGi enabled? Refer this.
Can you share screenshot of the destination settings and error ?
note: The blog you followed is referring to SP03 (1st GA of SMP3)..You should not have any problem in connecting to Oracle DB being on any SP.
Regards,
JK -
1310 with integrated antenna for 100M client conneciton
I would like to use as a AP to connect from my laptop which 100M away. Is it possible to use aironet 1310 with integrated antenna for this approach? Any experience?
Yes, You can use the 1310 device and configure it as a AP and connect it to your Wireless laptop. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge is a flexible platform with the capability of access point, bridge, and workgroup bridge functionality.
-
How to create Integration Flow for SOAP to RFC scenario?
Hello Friends,
We have Single Stack SAP PO 7.3 EHP 1 SP08 AS Java in our environment. We have a scenario where a RFC needs to be made available as SOAP Web Service. So we are using SOAP Sender Adapter and RFC Receiver adapter. We want to build this scenario with NWDS (Eclipse). We have imported the RFC and created data types, message types, service interfaces etc. But we are facing trouble in creating the Integration flow.
Please let us know if we need to create only one integration flow or need to create two integration flows (one for request and one for response) and what all configuration would be needed in Business Component and Communication Channel.
A step by step guide would be highly appreciated.
Best Regards,
Shreyansh ShahHi Shreyansh,
Found these links for you. Have a look at them and go through them. They should help you.
https://help.sap.com/saphelp_nw73ehp1/helpdata/en/95/8969b91d50439296dbd0a8ded93da7/content.htm
Understanding Integration Flow - Process Integration Tools (Eclipse-Based) - SAP Library
https://help.sap.com/saphelp_nw73ehp1/helpdata/en/e4/c9be6beab94f0b932e3c67f50e0093/content.htm
Regards,
Jannus Botha -
Problem with "Database Gateway for SQL Server"
Hello,
i am testing the different technologies for connecting an oracle database with a sql-server database.
The way using 10g-generic-connectivity with ODBC works fine, but the 11g-DG4MSQL makes problems.
Environment:
Server PEGASUS (32bit Windows Server 2003 R2 SP2) with Oracle Database 10g Release 10.2.0.4.0
Server OBELIXUS (32bit Windows 2000 Sp4) with MS-SQL-Server 2005
On PEGASUS i have installed the gateway in a new oracle home directory:
"D:\oracle\product\10.2.0\db_1" => home directory of 10g
"D:\oracle\product\11.1.0\tg_1\" => home directory of the gateway
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
MSSQLDG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DG4MSQL)
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MSSQLTEST)
(HS = OK)
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
D:\oracle\product\11.1.0\tg_1\dg4msql\admin\initDG4MSQL.ora:
HS_FDS_CONNECT_INFO=OBELIXUS/MSSQLSERVER/testuju
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
D:\oracle\product\10.2.0\db_1\hs\admin\initMSSQLTEST.ora:
HS_FDS_CONNECT_INFO=DSN_MSSQL
HS_FDS_TRACE_LEVEL=OFF
HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252
HS_FDS_FETCH_ROWS=100
HS_RPC_FETCH_REBLOCKING=OFF
How mentioned above, the access from oracle to sqlserver using MSSQL(10g hsodbc.exe) works fine.
But when trying to acces the sqlserver using MSSQLDG (11g dg4msql.exe) I get the following error:
ORA-28500: Verbindung von ORACLE zu Fremdsystem gab diese Nachricht zurück:
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.
[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).
[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
ORA-02063: vorherige 2 lines von DBL_MSSQL4
Here the contect of the file "DG4MSQL_agt_2332.trc":
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
HOSGIP returned value of "RECOVER" for HS_FDS_RECOVERY_ACCOUNT
HOSGIP returned a value for HS_FDS_RECOVERY_PWD
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "DG4MSQL"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.1.0.6.0_0006, Instance:DG4MSQL
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2008/08/22-16:17:42
RC=-1 from HOSGIP for "PATH"
PATH from environment is "d:\oracle\product\11.1.0\tg_1\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Programme\IBM\Informix\Client-SDK\bin"
Exiting hgolofn, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2008/08/22-16:17:43
Entered hgolgon at 2008/08/22-16:17:43
reco:0, name:testuju, tflag:0
Entered hgosuec at 2008/08/22-16:17:43
uencoding=UTF16
Entered shgosuec at 2008/08/22-16:17:43
Exiting shgosuec, rc=0 at 2008/08/22-16:17:43
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using testuju as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2008/08/22-16:17:43
HS_FDS_CONNECT_INFO = "OBELIXUS/MSSQLSERVER/testuju"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2008/08/22-16:17:43
dsn:OBELIXUS/MSSQLSERVER/testuju, name:testuju
optn:
Entered shgogohn at 2008/08/22-16:17:43
ohn is 'OraGtw11g_home1'
Exiting shgogohn, rc=0 at 2008/08/22-16:17:43
Entered hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
##>Connect Parameters (len=223)<##
## DRIVER=Oracle 11g dg4msql-OraGtw11g_home1;
## SERVER=OBELIXUS\MSSQLSERVER;
## Database=testuju;
#! UID=testuju;
#! PWD=*
## AnsiNPW=Yes;
## QuotedId=Yes;
## IANAAppCodePage=2252;
## ArraySize=100;
## PadVarbinary=0;
## SupportNumericPrecisionGreaterThan38=1;
Exiting hgogenconstr, rc=0 at 2008/08/22-16:17:44
Entered hgopoer at 2008/08/22-16:18:00
hgopoer, line 159: got native error 14 and sqlstate 08001; message follows...
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
Exiting hgopoer, rc=0 at 2008/08/22-16:18:00
hgocont, line 1890: calling SqlDriverConnect got sqlstate 08001
Exiting hgocont, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgocont.c LINE:1910 ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgolgon.c LINE:612 ID:Calling hgocont
Entered hgoexit at 2008/08/22-16:18:00
Exiting hgoexit, rc=0 at 2008/08/22-16:18:00
Many thanks in advance for any help!
Regards HartmutAt first your configuration is not really correct.
=====================================================
In the LISTENER.ORA from 10g, you must only refer to the database and hsodbc 10g
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
===========================================================
Then you have to create a new listener (new name) in the gateway oracle_home on a different port than instance database:
D:\oracle\product\11.1.0\tg_1\network\admin\listener.ora
SID_LIST_LISTENERGTW =
(SID_LIST =
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENERGTW=
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1522))
To start it, use the command below:
D:\oracle\product\11.1.0\tg_1\bin\LSNRCTL start listenergtw
===========================================================
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
match the DG4MSQL with the listener on 1522 port
HSODBC match with binary10g on listener 1521 port
MSSQLDG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1522))
(CONNECT_DATA =(SERVICE_NAME = DG4MSQL))
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =(SERVICE_NAME = MSSQLTEST))
(HS = OK)
Try to configure and let me know your feedback
regards,
Mireille -
Create Task with C# - App for SharePoint 2013
Hi everyone,
I need to create an app that can manage holiday for my company and we want to sync the demand Holiday with their tasks in Project Server 2013.
Unfortunatly, I cannot find how to add a task with an "App for SharePoint 2013" and in C#.
I've tried to add the task by entering an entry in the Project Server database but unfortunatly, it does not work.
Are there an other way to create task programmatically in Project Server 2013 ?
Thanks by advance,
PatmolHi,
According to your post, my understanding is that you want to use resource files in your SharePoint app project.
Here is an article for your reference:
http://msdn.microsoft.com/en-us/library/office/fp179919.aspx
Code sample: SharePoint 2013: Localize the app web, host web, and remote components of an app
http://code.msdn.microsoft.com/office/SharePoint-2013-Bookstore-328060fc/sourcecode?fileId=60464&pathId=1536365664
Best Regards
Dennis Guo
TechNet Community Support -
Create XML with digital sign and SOAP header...
Hi.
With ABAP, I need create an XML file iwith SOAP envelope. The message has to be signed and the sign data saved in the ws-security part in the SOAP header. I have to sign the file with a X509v3 certificate in base64.
Somebody can tell me how can create the SOAP header and sign it with ABAP for the XML.
Thanks.Please refrain from implementing WS-Security yourself.
NWAS ABAP 7.x provides support for WS-Security - in both roles, as Consumer and Provider.
The right approach is to generate a proxy based on a given WSDL.
What kind of (message-based) authentication is demanded by the WS Provider?
Other info source: see https://wiki.sdn.sap.com/wiki/display/Security/SingleSignonforWeb+Services
Edited by: Wolfgang Janzen on Jul 8, 2009 12:11 AM -
Problem with creating Operation with the BAPI_ROUTING_CREATE
I try to create a routing with operations attached to the default sequence with the BAPI_ROUTING_CREATE, via an external rfc-program.
I have no problems to transfer the Task Header und the MaterialTaskAllocation, but the transfer of the operation allways fails, without an error message. The system creates the Routing without any operation.
Are there some additional fields needed for the tranfer of an operation, in the online documentation there is only
the field OPERATION_ID defined as needed.
Thank's for any help
Jörg SloksnaitisI'll share my code snippet since I got this kind of working this morning. The following code with hard-coded values works and is a fairly simple and straightforward Routing. This may be something you can build on.
Task List Header
w_bapi1012_tsk_c-VALID_FROM = sy-datum.
w_bapi1012_tsk_c-VALID_TO_DATE = '99991231'.
w_bapi1012_tsk_c-PLANT = zzplant.
w_bapi1012_tsk_c-LOT_SIZE_FROM = '1'.
w_bapi1012_tsk_c-LOT_SIZE_TO = '99999999'.
w_bapi1012_tsk_c-TASK_MEASURE_UNIT = 'EA'.
w_bapi1012_tsk_c-TASK_LIST_STATUS = '4'.
w_bapi1012_tsk_c-TASK_LIST_USAGE = '1'.
append w_bapi1012_tsk_c to t_bapi1012_tsk_c.
Material Fields
w_bapi1012_MTK_C-material = zzmaterial.
w_bapi1012_mtk_c-plant = zzplant.
w_bapi1012_mtk_c-VALID_FROM = sy-datum.
w_bapi1012_mtk_c-VALID_TO_DATE = '99991231'.
append w_bapi1012_mtk_c to t_bapi1012_mtk_c.
Operation
w_bapi1012_opr_c-ACTIVITY = '9000'.
w_bapi1012_opr_c-CONTROL_KEY = 'RP02'.
w_bapi1012_opr_c-WORK_CNTR = ' '.
w_bapi1012_opr_c-PLANT = zzplant.
w_bapi1012_opr_c-DESCRIPTION = 'Test Operation'.
w_bapi1012_opr_c-BASE_QUANTITY = '1'.
w_bapi1012_opr_c-OPERATION_MEASURE_UNIT = 'EA'.
w_bapi1012_opr_c-VALID_FROM = sy-datum.
w_bapi1012_opr_c-VALID_TO_DATE = '99991231'.
w_bapi1012_opr_c-DENOMINATOR = '1'.
w_bapi1012_opr_c-NOMINATOR = '1'.
append w_bapi1012_opr_c to t_bapi1012_opr_c.
Thanks,
Tim Stadler
Menasha Corporation -
How to Force mac Thunderbolt External Display with Integrated GPU for Macbook Pro 2012?
I have been getting GPU Panic whenever I use external Thunderbolt Display.
Not sure whether this is software after(Mavericks) or hardware, if anybody could shed some light I would appreciate it.
The Current Discrete GPU will only work for few seconds 10 sec max before it became blank and require you to force shutdown. This also happened even without external display Blank and GPU Panic upon restart. So I suspected either the discrete GPU failure or software in Mavericks.
But at the moment I'm looking for workaround so I can use the intel intergrated GPU to use my Mac Thunderbolt External Display.
Thank you in advance for any input.
Anonymous UUID: 08E3F48E-64B8-B380-1B7A-A676656BE0A6
Fri Nov 1 21:55:27 2013
panic(cpu 0 caller 0xffffff7f8876bfac): "GPU Panic: [<None>] 4 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x102c00000 0xffffff80fe1b8000 0x0e7150a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80fd8b3540 : 0xffffff8006422f69
0xffffff80fd8b35c0 : 0xffffff7f8876bfac
0xffffff80fd8b3690 : 0xffffff7f87020cf8
0xffffff80fd8b3750 : 0xffffff7f870ede26
0xffffff80fd8b3790 : 0xffffff7f870ede84
0xffffff80fd8b3800 : 0xffffff7f87318f31
0xffffff80fd8b3870 : 0xffffff7f87111011
0xffffff80fd8b3890 : 0xffffff7f87027841
0xffffff80fd8b3940 : 0xffffff7f87025362
0xffffff80fd8b3b40 : 0xffffff7f870263cd
0xffffff80fd8b3c20 : 0xffffff7f86fd365a
0xffffff80fd8b3db0 : 0xffffff7f86fd23e4
0xffffff80fd8b3dd0 : 0xffffff7f8873e812
0xffffff80fd8b3eb0 : 0xffffff7f8873e6ee
0xffffff80fd8b3f00 : 0xffffff7f8873d55e
0xffffff80fd8b3f20 : 0xffffff800644a15a
0xffffff80fd8b3fb0 : 0xffffff80064d6aa7
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8875e000->0xffffff7f88770fff
dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f88756000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8772a000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f88759000
com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f86fd0000->0xffffff7f8723afff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f86fc0000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
com.apple.nvidia.driver.NVDAGK100Hal(8.1.8)[3CF8C2FA-83E6-39E3-A5B7-C7CC839B8C7 5]@0xffffff7f87245000->0xffffff7f873f4fff
dependency: com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f86fd0000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
com.apple.driver.AGPM(100.14.11)[087FCB18-55FA-300E-9D22-DDE636C74BE1]@0xffffff 7f8873c000->0xffffff7f8874dfff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
dependency: com.apple.driver.IOPlatformPluginFamily(5.5.1d27)[C86803C1-60BC-386D-9C54-2E6D7 4CCEA74]@0xffffff7f87733000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f86fc0000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
dependency: com.apple.AppleGraphicsDeviceControl(3.4.12)[C171C5AF-1BB6-385A-A4DB-3ED5626711 1E]@0xffffff7f8841c000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000006200000
Kernel text base: 0xffffff8006400000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 88932950458
last loaded kext at 12260883008: com.intego.Family-Protector.extension 1770 (addr 0xffffff7f8888a000, size 53248)
loaded kexts:
com.intego.Family-Protector.extension 1770
com.intego.virusbarrier.kext.realtime 775
com.intego.netbarrier.kext.network 653
com.intego.netbarrier.kext.process 653
com.intego.netbarrier.kext.monitor 653
com.rim.driver.BlackBerryVirtualPrivateNetwork 1.0.15
com.parallels.virtualsound 1.0 22731.929773
com.Cycling74.driver.Soundflower 1.6.6
com.veldom.driver.EM_Usb 1.0.48
com.cyberic.SmoothMouse 7
com.intego.Family-Protector.safe-boot 1770
com.rim.driver.BlackBerryUSBDriverInt 0.0.97
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AGPM 100.14.11
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.2fc2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleHWAccess 1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.driver.AppleIntelHD4000Graphics 8.1.8
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.GeForce 8.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIntelFramebufferCapri 8.1.8
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBXHCI 650.4.3
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.nvidia.driver.NVDAGK100Hal 8.1.8
com.apple.nvidia.driver.NVDAResman 8.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOAcceleratorFamily2 98.7.1
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleThunderboltEDMSink 1.2.1
com.apple.driver.AppleThunderboltDPOutAdapter 2.5.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOReportFamily 21
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.6 GHz, 8 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM512E, 500.28 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4I have the same problem with an early 2013 macbook pro. gfxCardStatus ( http://gfx.io/ ) will allow you to force integrated and not do dynamic switching, however the external display still doesn't work.
-
How can i create a dynamic cavs simultor for single webservice.
im using CAVS to create simulator .
im able to created a simulator that returns a predefined response for any request.but is it possible to create a simulator that can generate response dynamically base on data in the request?.See the following program, it builds a dynamic internal table based on the company codes from the select option.
report zrich_0001 .
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
data: it001 type table of t001 with header line.
selection-screen begin of block b1 with frame title text-001.
select-options: s_bukrs for it001-bukrs.
selection-screen end of block b1.
start-of-selection.
select * into table it001 from t001
where bukrs in s_bukrs.
perform build_dyn_itab.
* Build_dyn_itab
form build_dyn_itab.
data: index(3) type c.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'PERIOD' .
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
loop at it001.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = it001-bukrs .
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 4.
append wa_it_fldcat to it_fldcat .
endloop.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
Regards,
Rich Heilman -
Why to use DI Server when I do have Integration Platform for SOAP messages?
Hi All,
a general question is to understand which may be the advantages of 'DI Server' versus 'Integration Platform' and vice versa when there is a need to integrate with a third party system (eg exchange SOAP messages). I don't know if there is already any material, blog etc
Best Regards,
VangelisFrom the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit. -
Ip sla operations with different keys for the same destination
Hi all,
the customer wants to use different ip sla operations for the same destination (ip sla responder). From the first source router he uses key key1 and from the second source router he uses key key2. The ip sla responder responds only for the first router which uses the key key1.:-( Is it a normal behaviour? Can I use different keys for different ip sla operations for the same ip sla responder?
See the configuration on the responder:
key chain test
key 1
key-string 7 *key1*
key 2
key-string 7 *key2*
ip sla key-chain test
ip sla responder
He tried to use ip sla responders on:
Ciscu 2911
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
Cisco 881
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Thank you.
RomanThomas,
Have a look at:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-2mt/sec-conn-dmvpn-share-ipsec-w-tun-protect.html#GUID-2B448241-FD10-4F3B-BFF8-DFD44982D235
If you're using one tunnel source you need to use one ipsec profile, unless you're running (a) p2p tunnel which you're not in this case.
While you MAY have some luck with sharing/unsharing among different interface I'm afarid it will not be ever mentioned as supported.
The situation will change with upcomfing 3.10 and 3.11 IOS XE releases (and corresponding IOS releases).
M. -
ISE: create rules with AD groups for Users and Computers
Hello,
We've just begun to work with ISE.
Is it the good place to post on ISE, or there is a dedicated forum in another place?
We'd like to create some rule depending of Computer member groups AND Users member groups from AD, but we meet some difficulties.
We've created AD groups for Computers and Users depending of their Department:
Users_1
Users_2
Computers_1
Computers_2
When we create some basics rules regarding one group only:
- with a group Computers_x to attribute a specific VLAN to a computer (when no Windows session is opened), it runs correctly.
- with a group Users_x to attribute a specific VLAN to an user (when Windows session is opened), it runs correctly.
But when we create a rule regarding a group from Computers and one from Users, to attribute a specific VLAN to an user on a specific computer, this rule is not applied.
Is it possible to use ISE on this way?
Thanks for help.
Regards,
ChrisEnable EAP Chaining— if you want Cisco ISE to allow authentication of both machine and user in the same EAP-FAST authentication.
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_80_eapchaining_deployment.pdf -
Create URL with multiple values for one parameter
Post Author: cbamberg
CA Forum: General
While I have no problems to create the URL to open a report with a single value for a parameter from my Java application, I don't know how to format multiple values for a parameter when I want to pass the "&prompt0=" value. The values I want to pass are numbers, not strings.
Anyone can help?Hi gayatri,
you need to select both the product id and custname.put a count on the prodid column and write a condition of count>1 and apply it.
Thanks
Hari -
Not able to create STO with serial assignment for returning defective goods
Hi all,
I am facing problem while creating STO (641 movement) for returning defective engines which are manufactured at client plant.
The actual problem is:
My client manufactures engine with serial no. profile attached.The steps which is followed is (all the movements are reflected in Equipment master ie03 )
1. They create Stock using Assy. Back flush (131 movement)
2. They do Sloc transfer using 311 movement.
3. They send the engines to other plant by raising STO (641 movement)
4. The Receiving Plant is doing GR (101 movement) using Tcode migo and while doing GR they delete the Serial no attached to the particular engine against material manually.
5. Everything was going fine till some days before some engines were found defective, now they want to raise return STO against the sending plant to send back those defective engines.
I had simulated the same case in QA client, but after GR when i am trying to raise return STO by attaching serial no. it is throwing error like check Equipment status i had tried all one but nothing worked.
Your fast and reliable solutions needed.
Thanks and Regards,
AmarHi,
For converting PR to PO in the configuration you need to first set up which PR Document Type can be converted to which PO type.
You can check if the PR Doc type is assigned to PO doc type here
SPRO-IMG-Materials Management-Purchasing-Purchase Order(Purchase requisition)-Define Document Types
And if you need to prevent the referencing of PR for PO creation then you assign parameter EFB to the user role. This is done by BASIS.
You can whether your role has been assigned to any of the parameters. Ask you basis team to find this out .Tell the basis team your User ID and ask them which Parameter is assigned to your role. Give them the following configuration path if need
SPRO-IMG-MM-Purchasing-Authorisation Managment-Define Function Authorisation for Buyers
Regards,
Niranjan
Maybe you are looking for
-
I've fallen in love with the Envy 14-series and specially these three combinations of processors and memories: 1. Intel Core i5-480M processor (6 GB RAM DDR3) --> 8.499 kr. 2. Intel Core i7-720QM processor
-
Problem with USB on K7T 226 Pro2
I've read the manual through a couple times and it says that with the PC to PC USB network thing, plug it into JUSB 2. But the connector on the actual part only has 9 holes, the empty one it says to align with pin #2 isn't a hole... Basically I can'
-
Mapping from xsd:date to ABAP dates (yyyy-mm-dd)
Hi there, I've an automated activity that calls an ABAP web service in our SAP ERP. In my BPM data object I've a date in format xsd:date which should be passed as web service parameter. I've tried to use (Data_Object/Requestor/FromDate) cast as date
-
SAPehp tool does not know the host for Java stack
I am running SAPehp tool to apply enhp2 to a dual stack with ABAP and JAVA on seperated Windows boxes. I started SAPehp at the ABAP box. Because there is no way to tell where is the Java host, how do I apply the enhp2 to the Java side? How to make A
-
Time Machine is it or isn't it working
Hi I have a 1TB drive partitioned 350/650 - I have set TimeMachine to backup the the local volume and the 350 partition. I have installed the widget. The 350 partition is the home of my itunes and iphoto library and some other bits and bobs. widget m