Creation of production client copy

Hai,
What are the prerequisites for creation of client copy for production?
This is in regard to eleminate the default company codes existing in 000 client. In case if we opt for sap_cust the entire company code is copied.
Thanks
Hari Mohan

Hi,
you can not eliminate default company code while copying the client from 000 using SAP_CUST profile.
check SAP  Note 550894 - CC-ADMIN: Setting up a new client
Note 552711 - FAQ: Client copy
regards,
kaushal

Similar Messages

  • Production Client copy.

    Hi All,
    We have just installed a ECC 5.0 Production Server. We are creating a new client. We created the logical system and defined the new client as Production. Now when we run the Client copy from 000 it prompts that the target client is production and cannot be overwriiten. My query is, do we need to define the new client as customizing and then change it to production after the client copy?
    Or is there a different procedure for the client copy on production. Please help
    Thanks
    Deepak

    Hi Deepak,
    You can change the status of this client to Development and procced with client copy and afterwards, change it to Production system status.
    Hope this helps.
    --Amrendra

  • Payroll infotypes disappearing after a client copy

    Hi everyone,
    Our project team has done a client copy to two new clients (configuration and master data), and then decommissioned the source client. However, for some reason a number of infotypes do not appear against employee records in PA30. The infotype audit log has no record of their deletions (only their creations), and the client copy logs indicate that the expected number of records for the infotype tables was copied to the destination clients.
    Has anyone else come across this situation before? I am wondering whether the "missing" infotypes are in the client system and require something further to make them appear, given that the client copy logs indicated nothing out of the ordinary.
    Any help or advice would be greatly appreciated.
    Cheers
    Nuwan

    Hi,
    The wage type configuration still exist, but the infotypes themselves are "missing"/hidden.
    Cheers
    Nuwan

  • Need client copy of production server in quality server

    Hi,
    I need the client copy of production server with application data in quality server. How i do this?
    Main purpose is we have no data in quality server in testing purpose.  if we configure the client of production server in Quality, we can test it by our requirement.
    Regards
    Somu

    Try this
    Preparatory steps in source SAP system
    1 Take the trace of control file in the source system using the following command at SQL prompt as below:
    SQL>alter database backup controlfile to trace;
    The trace file can be found in the location <drive>\Oracle\<SID>\saptrace\usertrace.
    2. Open the file with notepad and save a copy as controlsrc.txt
    3. Stop the SAP
    4 Shutdown the database from SQL prompt.
    5. Take backup of database files.
    6. Start SAP
    Steps in the Target system
    7. Install SAP system with <TGTSID>
    8. Stop the SAP.
    9. Shutdown the database from SQL prompt.
    10. Take the backup of database files.
    11. Edit controlfilesrc.txt with regard to the locations of datafiles of source system to be placed in target system taking in to account the space available in different drives and save as control.sql. Also SET DATABASE u201C<TGTSID>u201D RESETLOGS.
    12. Replace the database files with source systems database files conforming to the control.sql
    13. Start the database in nomount state from SQL prompt as below.
    SQL>startup nomount
    14. Run the control.sql script as follows:
    SQL>@@<location of directory>\control.sql.
    Once the script runs successfully, the database will be in mount state
    15. Open the database with resetlogs option as follow:
    SQL>alter database open resetlogs;
    16. Create OPS$ users of source system conforming to target system conventions in database.
    17 Set the environment variable dbs_ora_schema to SAP<SRCSID> as the owner of the database objects will still be as SAP<SRCSID>..
    18. Start SAP.
    Lalit Kumar

  • Client copy & condition records: Printing from QA system to production

    Hi,
    We have the following problem: When production system is copied to quality assurance system (full system copy / client copy), also the condition records are copied. This means that when e.g. a sales order is printed in QA system, this printout goes to a business printer by default. This is a matter which is definitively annoying to the business.
    Is it possible to find an easy way to fix this problem? For example, can the condition records be cleared after the full system copy? Or, is it possible to add word "TEST" on top of the printout if it is printed in QA system? We are looking an easy and simple solution to this.
    I tried to find a solution in SAP Printing Guide, but couldn't find any help in there. Do you have any ideas or suggestions where can I find more help? Do you know if there is an SAP Note for this? Is the Message Control (CA-GTF-BS) http://help.sap.com/saphelp_46c/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm right place to start the investigating?
    Thanks in advance!
    Regards,
    Jarmo Tuominen

    After the system copy we go in and lock all printers then clear all the queues.  Simpler ways we've not found.
    We wrote ABAP programs that lock the printers then deletes the queues thus giving us the chance to clear things up as soon as the copy is done.
    Be nice to hear if anyone has a better way.

  • Client copy duplicate product categories

    How do i delete duplicate product categories in SRM5.0? I have a set of Pcats from the client copy (cats pointing BE of the client that is copied) and another set of Pcats replicated from the backend after client copy with logical system pointng to BE. I want to delete the copied ones and keep the replicated ones,...I had similar problem (doem pointing to quality BE and some dev BE) with products but I manged to change the logical system through BDLS and COMM_PRODUCT table, but in COMM_CATEGORY table i can't change the system as it is duplicated.
    Thanks,
    Shankar

    Hi Shankar,
    You can very well delete the hierarchies and products that are not relavant.
    For deleting products: Use SA38 txn. and run the report for COM_PRODUCT_DELETE_SINGLE , for deleting single product or COM_PRODUCT_DELETE_ALL for deleting all the products.
    For executing this report COMC_PR_TOOL_REG table needs to be populated with the program name, user name and execution date using SE16 txn.
    COM_HIERARCHY_DELETE_SINGLE report needs to be executed using SA38 txn. for deleting the Hierarchy that is material group or material type.
    For deleting product categories which are not relavant use txn. COMM_HIERARCHY and in the change mode double click on R3MATCLASS and choose the concerned back end and select the category to be deleted and click on Dlete category tab.
    Hope this makes you more clear and helps in resolving your issue.
    Award points for helpful answers.
    Rgds,
    Teja

  • Unable to find product categories after client copy

    Hi all,
    We have copied  clients from an existing ones for both SRM and ECC. After client copy we have followed standard procedure after client copy i.e.
    Run transcation BDLS
    created new RFC connections
    changed attributes using the Attributes replace report
    created new distributon model
    maintained CRM parameters
    maintained new site attributes in SMOEAC transaction
    maintained entries in table TWPURLSVR
    however , when i try to create a shopping cart,  I cannot see any product category. The extended attributes for product category point to new ECC client becuse we have run the attributes replace report.
    however in the product category table , COMM_CATEGORY , the product categories listed are all for the old ECC client
    When i tried to load the Object DNL_CUST_PROD1 using transaction R3AS in SRM and tried to pull from new ECC client , it is in runing status for a long time and new categories with new ECC backend reference are not being replicated in the SRM.
    Can you tell me why this could be happening ? How can i get the product categories from new ECC backend into my client?
    Regards,
    Mangesh

    problem solved
    i was using wrong parameters in BDLS

  • Replicating Product groups after client copy WRONG

    Hi Folks,
    I've taken a client copy from client 100 to 050 in both SRM SD1CLNT100 and ECC ED1CLNT100.
    I've done BDLS to replace log. sys. in both systems for both SRM and ECC log sys. eg. ED1CLNT100 to 050 and SD1CLNT100 to 050.
    After replication of config and product groups I'm stuck with the product groups replicateded in CLNT100.
    I get the root node after replication of product groups in the new 050 client but all the product groups are not copied!
    Any ideas to what I'm doing wrong?
    Thanks in advance,
    Thomas

    HI Thomas
    Can you pls go through following replies  --- 
    1 how to delete Product Category ?
    2 Re: Updating Product Categories
    3 Deletion of Product master on Production Client
        Run transaction BDLS to convert logical system from old ID to new logical system ID. The logical system ID now would be PR3CLNT700
    regards,
    Nimish Sheth

  • How to copy production client to development client

    Hello All,
       I have developed one report inwhich I call screen(module pool).My report name is zco11 as well as screen name is zco11.It is working fine and I transported it into production client(900).Now I rename the
    report name as well as my screen name in my development client(300).So now my screen zco11 and screen zco11 is not there in my development client(300).Now I want to copy my zco11 report as well as my screen zco11 from production client(900) to development client(300).is it possiable? if yes then how?
    please help.
    Thanks,
    Rakesh

    hi
    you cant do it yourself.just need to contact your basis team for setting up transports from production Developement.
    you can try System copy as well.
    hope this helps
    regards
    Aakash Banga
    Edited by: aakash banga on Jan 21, 2009 11:53 AM

  • How to copy changes to Productive client? URGENT!

    SAP has a note related to the payroll module which we had to apply to Client 000. We were able to use SCC1 to copy from Client 000 to Client 200 in our QA environment.
    However in Production we are unable to use the same method due to our SCC4 settings.
    SAP revert that we cannot use SCC1 in Production and that we should identify the changes and tie to table changes to a transport request and transport to Production.
    Can anybody please advise what is the best way to copy the changes to Productive client?
    Thank you.

    Hi,
    If that Org is with in the Parent Org unit, you can do.
    Good Luck
    Om.
    <b>Reward</b> ponts are always appreciated.

  • Target client is Productive and Protected againt client copy

    Dear Team,
    I have fresh install SAP R/3 4.7 with SQL .After installation  I make new Client 110.
    I login in 110 with sap* and password  pass.
    then via sccl i just for Client copy.this  messege is comming that is   "Target client is Productive and Protected againt client copy ".
    Where is the problm. Plz help .
    Thanks & Regards
    jagdish Kumar

    Maybe you have in production system in SCC4 the option
    Protection: Client copier and comparision tool - Level 0 activated
    Markus

  • GL Account Creation from Golden Client to Production

    Hi,
    Is there any way that we create GL accounts in Golden Client and automatically it gets created in Production Client? I heard that it's possible through IDOC. Can someone please throw light on how to achieve it?
    Regards,
    Sanjay

    Hi Pushkaraj,
    FS15 / FS16 is not working. Refer thread -
    Error while copying GL Accounts from One Client to another client
    Any other way?
    Regards,
    Sanjay

  • Report copied at FGRP,how to execute it at production client?

    Dear all,i've copied a report done using report painter ( FGRP ) and i already transported it from developmet to production client. but the problem i am facing now is,how should i execute the report? where should i execute it? pls help. Thanks

    check Ke30? where u defined Form for that report .
    if u want to create tcode , then do the same way what sugg.by anji.
    regards
    Prabhu

  • Target client is productive and protected against client copy

    when copy 000 with tran code sccl its give error
    Message no. TA133
    Target client is productive and protected against client copy

    Hi Rahul,
    I mean:
    Execute SCC4.
    Push the "Edit" icon at the top (pencil).
    Double-click the target client.
    At the new screen, change the Client Role (you can select "Test").
    Change the combo "Protection Level" to Level 0.
    Save changes.
    After the Client Copy, you can revert all these changes to the original status.
    Regards,
    JC Llanes.

  • IMG - Target client is productive and protected against client copy

    I am doing post-installation for Solution Manager 4.0 and encounter the above error.
    From the IMG Solution Manager Basic Settings ... --> Create Client, I created client 020 and the role = customizing.  Protection Level 0 and allow change to  repository and cross-client customizing.  Then, I click on Copy Client, it gave me the above error.
    I could not find any information regarding the correct way to work around it.  I tried to log into client 020 with SAP*/PASS to do manual client copy, but could not login either.
    Anyone ran into this problem?  Please share your successful instructions.
    Thanks.

    Hi Teengh,
    you can only do the client-copy in the target client; in your case in client 020.
    Please have a look in TA scc4 whether the client 020 was really created. If it is existing, then you should be able to log on to the client 020 with sap*/pass (password in lower case). What was the error message after you could not login?
    Best regards,
    Kai

Maybe you are looking for