Creation of suspension line items for Subscription orders

hi ,
I am currently working on IS-Media project.
I have a requirement that I need to create a suspension for all the line items available for the subscription orders.
I mean I have to create a new line item for all the active line items of a subscription order.
I have seen the FM : ISM_SALES_ORDER_CHANGE.
it is working for only single active line item.
Could you please suggest any of the Function moulesavailable in the SAP : IS-Media?
Thanks in advance.
Vijay.

Vijay,
The best FMs that would meet your needs are below. They are listed in the order that will best address what you are trying to accomplish. They are ISM_SALES_ITEM_UNLIMIT_CHANGE, ISM_SALES_ITEM_SUSPEND and ISM_SALES_SCHEDULE_CHANGE.
I hope this helps.
Sibu

Similar Messages

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

Display report : plan line items for internal orders

When running the report with KOBP tcode, although i have some plan cost line items in the order, i have the message :
No plan line items were selected
Message no. KB421
Could anyone advise?
However, the report with KOB1 tcode works well and i have the results as expected for actual line items.

this is may be config issue.
can you explain with accounting entries for said line items and offsetting GL for each line?
regards.
ashok

New contract account for every line item in subscription order....

Hi Guys,
I am having a problem with the subscription order.
Whenever I change the subscription order and add a line item to it, SAP by default creates a new contract account for that line item. Whereas I want to assign the same contract account to the second line item also.
Can you suggest me any solution for this problem?
Thanks in advance...
Regards,
Abhay

Hello Abhay,
This is the normal and correct function for SAP. If you would like for the subscriptions to be on the same contract that you subscriber has, an enhancement has to be developed.
We had a similar requirement and an enhancement was developed per specifications.
Regards,

Issue in creation of new line item in repair order-Reg

Hi all,
I have a query in Service Management Module of SAP while working in standard IDES System.
I followed the procedure given in the IDES material.
As per the standard system the fourth line item in the repair order should be automatically created, once the service order is technically confirmed and completed. In my case iam able to get the first three (Item Categories - IRRS,IRRE,IRRP) line items but even after completing the service order technically iam not gettin the fourth line item (IRAL). Only based on the Fourth line item we can create the Outbound delivery for the repaired item. After that the billing process need to be processed. My query is how to get the fourth line item automatically in the repair order after i technically complete the Service Order.
To brief you on the entire process that i have followed:
1. The QM Check need to be activated for the material.
2. Creating the Service Notification and the repair request.
3. Posting the GR of a piece of equipment to be repaired.
4. Processing the technical check.
5. Displaying the repair request and the service order.
6. Editing the Service Order.
7. Processing and Confirming the Service Order.
8. Technically Completing the Service Order.
9. Delivering the Repaired Piece of Equipment.
Then Comes the BILLING.....
In the above, after the eighth Step the Fourth Line item will be created automatically created but it DOESNT....
regards
Venu

Hi ,
Review your repair procedure and copy controls defined for this stage...mya be some thing is missing over there causing this behaviour.
As you told completion of Service order will determine the last item and enable us to delivery the item to customer...
Thanks,
sudhi

How to get the texts for each line item for Sales order in a smartform

I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....

Hi There,
But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
Like for ex:
PO No. Material Code        Line Item        Basic        Excise       Tax       Inv Value
0000001 5000251                010               100           16         4.64      120.64
0000001 5000252                020               200           32         9.28      241.28
Can u help me on this?
Regards,
Jitesh

Sales order: Two schedule line items for single order item

Hi,
I have an issue with the schedule lines in the sales order. When we create a sales order with today as the delivery date, it creates two schedule lines for the single order item. But if we give future date as the delivery date, then it creates one schedule line only. The confirmed quantity for the first line item (with today we the delivery date) is zero and second line item confirmed quantity (with delivery date as tomorrow) is actual order quantity. So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do we have stock.
We donu2019t have availability check on and we use custom line item and schedule line categories.
Please give some hints on what might be the issue.
There was on post with this kind of issue, but it was closed without answer.
Thanks,
Srini

Hi Srinivas,
So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do have stock.
As per my understanding although you have sufficient stock for the material system may be confirming the quantity in future date because of the forward scheduling. As you know system adds different times while evaluating the confirmed delivery date. Check the route which system is using.

Maximum no of Line items for sales order,delivery document and billing docu

Dear friends,
How many line items we can enter for the following,
1) a Sales order
2) a Delivery document
3) a Billing Document
Thanks in advance.
Regards,
Shrikant

Hello,
the maximum limit of line items are as follows
order-9999
for delivery and invocie , it is restricted to 999 accouitng line items. since the tranfer to accounting can handle only 999 items , the restriction on delivery and invocie
ex if there are excise postings, for a single line , there might be 5/6 lines genetrated for each line in invocie , therfore as per this the line in invocie get restricted
you have a sap note , which offers suggestions to partially over come this
hope this helps
Thanks
akasha

Maximum allowed line items for sales order

Hi All,
I am creating sales order thru' BAPI, I heard there is a constrain like only 999 line items allowed for one Sales Order.
Is there any such constrain is there in SAP. (if yes.. Is there any way to resolve the problem...)
I am working in SAP ECC 6.0 version.
Thanks in advance.
Regards

I have not heard of any particular limit imposed by SAP. The field length for line item number (POSNR) is 6 digits, so technically it is limited to 999,999 line items.
The item number assignment is, however, driven by the configuration. Some companies might choose to increase the number by, say, 10 (i.e. the line numbers will be 10, 20, 30, etc.), therefore limiting the total available lines. Note also that line item assignment is different on the billing document, so enough space should be allowed on the order to accomodate all the consequent documents.
An obvious solution is to split the large orders into several smaller ones to avoid running over the limit.

Reg WBS Element in Sales Order Line Item For Sales Order BOM

Hi ,
Greetings!!!!
I have a requirement, in a Sales Order I am Exploding BOM. After that Projects will be Created.
Once Project will be created i need to Assign WBS element for All Items in Sales Order.
My requirement is When I assign WBS element for Header Material (Parent Item) system will auto assign WBS for Child Items.
for this what Configuration I have to do.
Please do need full.
Thanks,
Regards,
Prasad.

Hi Dayananda
Check in transaction VTFL for given item category what copying routine are set. Check those copy routine and see if there is any data is being copied from table VBAP
Similar to above also check transaction VTFA for copying routine (if any)
As a standard SAP even we create an invoice with reference to the delivery document, still there are some data which is being copied from a sales order i.e. all pricing relevant information is copied from your sales order and not from delivery.

Budget Line Item for Internal Order was disappeared

Dear GURU,
I have the problem when posting budget via Tcode KO22 KO24 and KO26.
When posting budget in the first time, the system was not generate budget document.
But it was created when I post budget again in the second time.
Please tell me what happen for this situation, I am not sure there is SAP note for support this error or not?
Thanks in advance.
Regards,
Nattakarn A.

Hi Eli,
Thanks for your response.
This situation was only occurred in the first time of budget entering for each internal order.
Please kindly to help me to solve this problem.
Thanks in advance.
Regards,
Nattakarn A.

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

Production order from sales order with multiple line item(for one material)

Dear Gurus,
I am working in MTO scenarios. If there is several line item in a sales order for one material, multiple production order( same as no. of sales order line item) is getting created against each of the line item.My requirement is,since the material code is same in each line item and sales order is one, one production order should be generated for all line item. please tell me how to do it.
(Here for one material, multiple line item is required for some specific reason)
Regards
Rajib Pathak

Hi,
This is not possible.
In Std SAP will create one production order for one sales order. The stock is also allocated to thet particular sales order only. Because each and every sales order may vary in any one of the parameters. Considering this, SAP has designed like this.
Regards,
V. Suresh

Report for deleted line-items in Transfer Orders

Dear All,
Please help me in writing the code for "Report for deleted line-items in Transfer Orders".
regards,
nishu

Thanks. Repor completed.

Same material can exist on multiple line items for the same order.

Hi
Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
Regards

No.
But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
Eawar Ram
http://www.parxlns.com

Creation of suspension line items for Subscription orders

Similar Messages

Maybe you are looking for