Credit/Down payment Request

Dear Gurus,
I am using credit management and assign a credit limit to the customer all ascenario are working fine.
But one of my material client is selling on advance basis, so here i want that no credit can be utilize and system need a advance payment and than move forward. Advance can be receive before and after saving an order.
can any of my guru suggest that how i will cater this scenario. Is down payment or some thing like that will assist me in that.
Looking for the gurs response.
regards,

Hi,
http://www.sap-img.com/financial/how-down-payments-are-configured.htm
Advance payment Scenario
kapil

Similar Messages

Down Payment request more than PO value

Hi All
How I can stop making a down payment Request of more amount than the P.O
Value?
I have changed the Message control and made the warning as error.....Now if
I make a downpayment more than the P.O amount in a single posting, it gives me error message. But, if I create partial payment requests against a PO, it exceeds the value of PO.
For example, suppose I have P.O of Rs 50000
and still I make two downpayments of 40,000 and 50,000 system accepts
I have tried for the user exits, BADi also, but I am unable to get a solution.
Kindly help me in finding a proper solution to this.
Regards
Debasis Panda

Hi Jaya Jaga
As per my knowledge, this is finance related Anyway, I can answer this question and please configure accordingly. Please give feed back.
Follow the Configuration Path
SPRO u2013 Financial Accounting u2013 Accounts Receivable and Accounts Payable - Outgoing Invoices/Credit Memos - Carry Out and Check Document Settings - Maintain Field Status Variants
Then Double click
(OR)
Transaction Code OBC4
Change Radio button option from Suppress to Required. Entry option in Purchase Order field. Then SAVE
Hope this can be clear.
Thanks
Vijay

Down payment request: posting using BAPI_ACC_DOCUMENT_POST

Hello, Gurus!
We have a problem with posting DPR using BAPI.
We can't carry out DPR for a Vendor.
The following parametrs were set:
1) BSTAT = 'S'
2) ZUMSK = 'A'
3) BSCHL = '39'
4) SHKZG = 'H'
5) WRBTR (negative sum is written)
6) GLVOR (business transaction) - RFBU
7) we also set assignment to a Funds reservation document.
When we try to execute BAPI it returns an error RE 041 "Amount in document &1 &2 may not be exceeded".
Perhaps, FM-PSM thinks that we try post a credit memo...
We used F-47 before, but we need to use the BAPI.

Hi,
I had the same problem with posting a down payment request using BAPI. Actually, it seems SAP does not allow to post this kind of document "natively". Therefore, you have to implement a BADI (ACC_DOCUMENT) in order to make it work.
1. Be sure you have the latest notes applied for BAPI_ACC_DOCUMENT_POST (especially note 561175)
2. As for as DP request, call BAPI with DOCUMENTHEADER, ACCOUNTRECEIVABLE and CURRENCYAMOUNT filled with your needed lines.
In my case, I set SP_GL_IND to 'F'.
3. In your implementation of BADI, in method CHANGE, set ACCIT-BSTAT to 'S' (noted items) so that balance check will not take it into account. You may customize your line if needed.
This should be enough to have your document posted. I can give you more details should you need help.

A/p Down Payment Request and A/p Down payment Invoice

hi All,
I am Using SAP B1 2005B
A/p Down Payment Request :-
1.Wnen i want to give a 50% Advance Based on Purchase Order What is the Procedure. whether i have to use A/p Down payemnt request or A/p down payemnt invoice.
2.whenever i am making down payment request there is no JE and There is No GL and BP affected.
2.a. While making payment against down payment request there are 3 accounts hitted
1.Bank Account.
2. Bp(As Advance-Debit balance)
3.GL linked with BP.(Acccounts payable).
Is Correct or Not?
3. While Making A/p Invoice can we pick this Advace in A/p invoice Entry and can we Adjust .
at this stage Whenever i want to Check the balance of the BP should be Debit Balance(as Advance).
A/p Down payment Invoice:-
What is the Procedure, When it will be Used and What are the GL affected.
Thanks & Regards,
yusuff

Hi,
We are using A/p Down Payment Invoice where the entry is
Party Credited
Advance for capital purhase ie. ofset account is debited
and making payment
Party Debited
Bank Credited
and when linking with Invoice
Advance for capital purhase ie. ofset account is credited
GRNI of Asset A/c is debited.
Here the main issue is in Party ledger its showing 1st credit and then debit and your requirement that Party should be shown debit balance it will be not there it will be in Offset account i.e "Advance for capital purhase ie. offset account"
Now you have to generate query base report if you want to show advances given to party.
This is what we are doing if there is any other possibility kindly revert back all experts.
Thanks
Kamlesh

Down Payment request reversal

Frnd
I have below situation.
I have created down payment request for 1000$ for one vendor. then when i go to FBL1N and execute it with onlny noted item selection, it show me credit balance of 1000$ and red dot which i expected, since it s not cleared.
but later on i reversed the down payment request and executed FBL1N with noted item tab and again it shows me 1000$ credit balance with green dot cleared, which i expected but why would it still show me $1000 credit balance.
even though i have reversed it, it is showing me credit balance, rather it should show me zero balance.
please let me know your thoughts
thanks

Hello,
Yes, at first look that is weird. But, if you run FK10N, you will see there this amount won't appear. I believe because there it doesn't consider the Noted items.
Also, if you reversed the noted item with FB08, you will see the reverse document is in fact a clearing document without items. As the noted item is not, in fact, an accounting document (because it doesn't have Debits and Credits), for me that makes sense!
Daniel.

Down Payment Request not being listed on F110

Hi Guys
I have completed down payment config for Sp GL indicator A and F.
I have set up the recon accounts and allocated the required SP GL indicator to the paying company code.
I have posted a down payment request.
The open item credit is lying against the vendor and is due for payment.
When I run the payment proposal it does not recognise the down payment request.
Any suggestions?
Thanks
Dennis

hi Clinton,
Please note that when there is <b>Balance </b>of line itme showing then only u can run the F110 and u can clear the payment.
IF u want u can also cleate the Payment trough the F-58 and this is also through the Check method.
Steps in F110
Go to F111
Enter parameters (tab on the application bar)
Enter next payment run ( some other later date), company code, pament method and your GL
account (rent account)
Then click on payment medium, give variant under rffous_c
Go back and click onl dynamic selections enter your housebank details
Enter aditional log, check line items display and give your other gl account there (payable
account)
Then save, you got the message parameters have been entered...
then click on proposal.. you will get message ...then press enter
then click on payment medium ... you will get message... then press enter....
save....
Then go to SE38 give program variant rffous_c and enter remaining required fields and then
execute F8
assign the points...if need full..
Ranjit

Difference between A/p down payment request and invoice

hi,
can any tell me what is difference between A/P downpayment request and Invoice
Regards
Srinivas

Hi Friend,
I list some information here, which might help you better understand.
Down Payment Invoices
The Down Payment Invoice behaves like a regular Invoice. A Down Payment Invoice can be based on a Sales Quotation, a Sales/Purchase Order or a Delivery/Goods Receipt PO in the same way as a regular Invoice; however this will not close the base document.
A Down Payment Invoice can be cancelled by a Credit Memo; however this Credit Memo cannot be based on multiple Down Payment Invoices.
In addition, this Credit Memo will not affect the warehouse stock or the stock valuation.
Note that cash discounts are not available in the Down Payment Invoice.
The Down Payment Invoice will be displayed in the Tax Report as a regular Invoice (if Deferred Tax is not checked).
Down Payment Request
This method of Down Payments is suitable mainly for Germany where it is necessary to show the tax payable at the time of receipt of payment. A journal entry for the tax is created by the payment of a Down Payment Request. The payment will also be displayed in the Tax Report.
A Down Payment Request can be based on a base document the same way as a regular
Invoice; however it does not close this base document, i.e. the base document remains
open and can be copied to another target document if required.
Kind Regards,
Dani Zhao
SAP Business One Forums Team

Down payment request clearing in manual bank statement

Hello,
can somebody advice how to configure manual bank statement posting rule in order to clear down payment request (sp.GL indicator F).
The case I would like to solve is the following:
1. I have created a down payment request via F-37.
2. On the bank statement I have payment received from customer for the above payment request
3. I need to configure a posting rule in manual bank statement in order to post the received down payment.
    Debit : bank account
    Credit : customer account with sp.GL indicator A and clear down payment request.
Thank you for any advice!
Gabriela

I am in 4.7. It seems that the interpretation algorithm doesn't search the items in statistical postings (down payment request). I have choosen interpretation algorithm 021 Reference document number search. The down payment request as XBLNR 134134. In program RFEBKA00, I have XBLNR number interval 112000 - 199999 and the program doesn't find the down payment. FEBCL is empty. When I fill FEBCL in the user exit, the clearing process works fine without any manual action.
When looking in the program RFEBBU10, I can see:
FORM X-TREFFER_PROBELESEN.
CLEAR TREFFER.
LOOP AT TREFFER.
    SELECT * FROM BKPF WHERE BUKRS = FEBKO-BUKRS
                         AND BSTAT = ' '
                         AND XBLNR = TREFFER-NUMMER.
Since the down payment request has BSTAT 'S', that explains why the standard interpretation algorithm doesn't find the document (TREFFER-NUMMER has the right value 134134).

Paid Down Payment Request from 2007 not visible in 8.8

Hello experts:
I recently upgraded a customer from 2007 to 8.8, and an existing fully paid down payment request is now not visible anymore in the "incoming payment" window due to some of the changes in 8.8. But I also cannot reconcile the transaction because paid down payment requests cannot be reconciled.
I tried to cancel the incoming payment in order to apply it differently, but that also fails with a strange error message ("Cannot cancel payment: One of the credit notes has been deleted. [3524-6]").
I could create a JE to transfer the balance from the liabilities account to the asset account within the BP, then reconcile the two transactions in the asset account, and effectively having zero balance in the liabilities account, but I'd like to reconcile the two transactions in the liabilities account as well, so that they're really closed.
Any ideas?
Thanks in advance.
Joerg.

Thanks for your reply Jitin.
My issue is related to A/R, so the mentioned query doesn't turn up any results. However, a few minutes ago, the same issue appeared in A/P, so I tried the query again, with no luck.
I will proceed to log a support message and post back with the solution.
Thanks,
Joerg.

CO Object Assignment Error while posting Down Payment Request

User is raising a Down Payment Request for the purchase of an Asset through a Purchasing Document. This Asset Master has got the cost center and WBS Element assigned in it.
System while saving the DP Request is throwing an error that CO Account Assignments has different Profit Centers
I have also checked the cost center master but the profit center assigned there is correct only. Should I check the OKB9 settings ? If yes, for which GL Account do I need to check ? Where else can I check the CO Object Assignments for profit centers ?
Requirement is critical. Please help.
Thank you
Ravi
9849393564

Hi,
Good evening and greetings,
Please have a look in GGB1 (Profit Centre Substitution), there may be some rule which is overriding the OKB9.
Please reward points if found useful.
Thanking you,
With kindest regards,
Ramesh Padmanabhan

Vendor down payment request over PO value

Hi All,
I have a requirement for vendor down payment request amount compare to PO value checking.
I have PO with total value - 600 USD.
When I create down payment request using F-47, I input amount 1000 USD.
The system never show me any message.
I want the SAP to block me from posting down payment request over PO value.
I've read in the forum, to change message type F5373 with error type. But the message never appear in my F-47 screen.
Anyone can help me, what am I missing here ?
Thanks,

Hi,
You are right about message F5 373. But this is applicable at the time of the Payment of the Advance i.e. F-48. It is not available at the time of creating the Advance Payment Request against T Code F-47.
If you want to have this control in the Payment Request, then you will have to use the validation, which you can put with the help of your abaper.
Regards,
Amit

Vendor down payment request Error

Hi all,
i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
Kindly help me,
Thanks in advance
Ani Varghese

Hi,
The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
You might not have maintained the GL Accounts for this. Maintained it in OB40.
Regards,
Amit

Vendor Down payment request

Hi,
I have 2 queries regarding vendor down payment request F-47
1) Want to create DPR on header level (We have ECC.6 No enhancement package)
2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will create multiple request of same line item with actual amount or less amount (but more then actual amount in total) will be not stop me.
I already active F5 373 message into error.
Thanks,
Farrukh khan

Hi,
You are getting this error becausea either you have giving more amount than the PO value or GRN and IV has already been created for this item.
You are requested to do create DPR as per below given screen shots
Press Enter
Click on
Hope, this solves your issue.
Regards,
Tejas

Vendor Down Payment Request on WBS (F-47)

Dear Fellows:
I have came across a problem that while creating a Vendor Down Payment request (T.code: F-47) on WBS, my system is not stoping me over budget exhaust. I have Budget of 100 and i create request for 101, system allows it and post the document.
Vice Versa if i create a Vendor Down Payment request over Commitment iten, then system check the budget and generates message.
any good solution to it would highly be appreciable.
Regards.

Hi,
The budget availability check is done only against the assigned values and
Following entried does not contribute to the Assigned value
    V: Value type not relevant (<> Act./Plan/Stat.Act./Stat.Plan/Commt)
    D: Delivery
    S: Settlement to object with no budget control
    R: Revenue cost element
    C: Cost element is exempt cost element
    M: Minimum from actual + commitment and plan per order value update
    P: Plan value is not on apportioned order / network
    B: Plan Costing Single Position
    S: Funds Commitment in Balance
So the down payment is not covered for the calculation of the assigned value.
Hence no check is carried out for the Availability check.
hope its useful.
Reward points if useful.
Thanks..

Vendor down payment request to MM purchase order

We want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole, so without the line item numbers.
Thanks
Martien
Edited by: M. van den Eshof on Mar 12, 2010 1:10 PM

Dear Martien,
we have had the same problem here at our company. In ECC6.0 we haven't found a solution for this.
We are doing a workaround:
We post the down payment request only on one, the main item in the purchase order. But this causes negative effect on cash management.
If you find a other solution, so please tell me.
Best regards.
Manuel

Credit/Down payment Request

Similar Messages

Maybe you are looking for