Crio-system in sleeping-mode or software-switching-off ?

hi,
i have a cRIO - 9012 system and i want to know, if anyone knows if it's possible to send a signal to a i/o module on the target that says that the cRIO-system should switch in a sleeping-mode or that switches it off. if it's possible how, and how can i turn it on again? maybe via the ethernet port ?
or does anyone know, if there is a module that has an elko or anything else, that can power the system for a few seconds after you switch the main power supply off ?
thanks for your replies,
simon

Hello Simon,
I think i may have found what you have been looking for:
http://digital.ni.com/public.nsf/allkb/AE7320AEEB6D77188625713B007EC2C4?OpenDocument
This Knowledgebase shows how to set the cRIO chassis and modules in sleep mode.
This "sleep mode" works only for the chassis (FPGA) therfore you will have implement "Wake on Lan" functionality in the Real Time part yourself.
There already is a Produkt suggestion for this feature so it may be implemented in the Future.
As far as i know there aint no C Series module providing a Capacitor huge enough to power the System for a few seconds.
But you can use standard Uninterruptible Power Supply (UPS) to power the System when the line voltage is missing.
Regards
Wetzer

Similar Messages

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

Ipod would only go inot sleep mode but not turning off

ever since I update the software to 1.2.3., my ipod won't turn off. every time I press play/pause, it goes right into sleep mode. I didn't realize it until my ipod started being out of battery almost every 2 or 3 days several times when i only used it for 1 or 2 hours per day. (while before that, with the same usage, I only need to charge it like every 2 weeks.) Is anyone having the same problem? and how can i solve it?

First step is to do a reset on the iPod. You might need to plug it into a USB port and leave it there for 30 minutes to trickle charge. Then...
Slide the hold switch from OFF to ON back to OFF then immediately hold down BOTH the center and Menu buttons for a good 15 seconds or until it restarts with the Apple logo.
Resetting isn't always effective once and you may need to retry it several times to get it to work.
Patrick

Insomnia (phone will not sleep and cannot be switched off)

I have had problems after trying out the Z2 mag charging dock, my phone keeps waking the screen when it is being charged (the screen timeouts and turns off before being turned back on again after a few seconds, showing the lock screen), even after i switch back to the standard USB charging cable (charging directly to the microusb port). I have checked developer options and keep screen awake when charging is not ticked so that's not the problem.
Additionally, my phone is not able to be switched off. When i switch off, it will enter into a sort of bootloop where the phone will spontaneously turn itself on showing 'Sony' screen > black screen and it repeats this cycle. The phone can however be turned back on during this bootloop if i i press and hold the power button while the screen is black.
I have scanned the phone using various reputable antivirus apps and none of them have turned up anything. Did a factory reset but it didn't solve either problem.
Appreciate any help I can get.

Hi, I know its been a while since you posted this issue, but was wondering if you have got it solved and if yes how you did it.
I have run into excactly the same problem yesterday after accidentaly connecting magnetic charging cable the wrong way.
The phone went instantly dead (battery discharge), after that Red Light came on and starting blinking when on wall charger.
I left it on charger for 4 hours and was able to get it restarted. Now whenever I put it on charger the screen will not sleep. It will dim and turn off but straight away turn on again. I have run PC Companion twice to repair but it is still doing the same thing over and over again. I also have the issue that I cant switch it off as it will go into a Sony Logo Bootloop. I have to force shut down and then I can charge it without problem. Once I remove phone from charger it will go into Sony Logo Bootloop again until switched on.
Any ideas??

"Not desturb" mode doesn't Switch Off

"Not desturb" mode (Moon sign in Front of Time) doesn't Switch Off on set off time since 2013.
Same Problem with iPhone 5 and iPad Mini. Both iOS 6.0.2

Do Not Disturb scheduling feature will resume normal functionality after January 7, 2013. Before this date, you should manually turn the Do Not Disturb feature on or off.
To turn off the scheduling feature, tap Settings > Notifications > Do Not Disturb and switch Scheduled to Off.
http://support.apple.com/kb/HT5467

Z10 sleep mode doesn't turn off notifications

When I activate the sleep mode, it shows 'notificationsoff' but I still get audible alerts. Is there something I'm missing? Any settings I can check for the sleep mode?
Thanks

Hey bbjohnm.
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What version of BlackBerry 10 are you running? Go to Settings>About to get this information.
Also if you remove the battery and place it back in and then try sleep mode, do you still get notifications?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Ipad 3 in sleep mode the wifi shuts off

The wifi on my ipad 3 just started shutting off in sleep mode. Could this be my router? I've tried resetting my ipad.

You are most welcome

Ipad sleep mode? Or power off?

just curious to see if users are leaving their ipads on but in sleep mode or completely shutting them down when not in use? And does leaving it in sleep mode for a long period adversely affect the ipad?

I have only turned mine off once in the two weeks I've had it. Others have reported that they turn it off to keep from having WiFi problems. I've been fortunate I suppose. Taken it on a business trip, used several different hotspots and haven't had a problem.

HT201263 iPad screen went black when fully charged and would not come out of sleep mode, turn on or off and did nothing when connected to USB port?

I really do not want to restore this iPad if I can find another solution. I had to let the battery drain completely in order to prepare it for restore, so I'm prepared to do that if I must.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Voice over mode does not switch off

When I go to turn off voice over mode - I double tap on voice over but it turns off only for a second the. Turns back on again

Hi there Gottliebsen,
You may also want to try triple clicking the home button to disable VoiceOver. Take a look at the article below for more information.
iOS: Configuring accessibility features
-Griff W.

Prevent Macbook/Cinema display sleep mode when switching from plugged-in/off

Hello, I've a macbook connected to a Cinema Display. On Energy Saver, all is set to never go to sleep. I'm trying to prevent my macbook going to sleep mode when I plugged off it. Do you have any solution for this?

KinoBillie wrote:
Hi tjk,
Yes I mean when I disconnect the power supply (that comes from the Cinema Display) the macbook pro goes into sleep mode until i press a button on the keyboard, then it returns into running mode (even if in energy saver all is set to never go to sleep).
I would like that, if there is a power cut in my house, the mbp does not go into sleep mode but continue to be in execution (by means of battery) avoiding sleep mode.
Thanks
Looks like someone already cut in to try answering, but I'll answer the question you asked me anyway. You can read Apple's directions http://support.apple.com/kb/HT3131 and see that unplugging is the cause. It's not really an issue, it's just the way it works.
Contrary to the statement "There's no way around it." you may want to look into UPS (uninterrupted power supply) if it's important enough to you. I have never used one so I am not familiar with them, but by their very nature/purpose, I would think they'd do what you need.

WINDOW 8.1 ON SLEEP MODE SHUTS DOWN

Please i have been having issues with my Windows 8.1. I find it very difficult to put my system on sleep mode , when using this boot option my system automatically restarts itself and all unsaved information or documents is lost. How do i reset this options
to it's default.Thanks

Hi olagoke,
Did the issue occur accidently , have you installed any software recently?
First of all, please install the latest drivers for the machine and update the BIOS to check whether the issue is gone.
Apart from this, I agree with the Clean Boot , Device Clean Boot and Powercfg command solutions involved in the link posted by
arnavsharma.
If the issue persists, I recommend you check the Event Viewer to collect some information for further diagnostic.
To check Event Viewer:
Event Viewer \Windows logs \System
Best regards

Internet is EXTREMELY slow after computer has been in sleep mode (T61)

Pretty self-explanatory. I did a system restore to factory settings recently and ran the ThinkVantage system restore tool and updated everything. Now, whenever I put my computer to sleep, it fluctuates between going around 3 MB/s 5% of the time and around 0.01 MB/s the other 95% of the time when it's woken up. The only temporary fix is rebooting.

Yes, if the power settings have it such that "sleep mode" is disabled, then you're right; you shouldn't have a problem
I'm more interested in what happens if you explicitly force the system into sleep mode (via Fn+F4) and then wake it up. Do you still have problems with wireless performance? If not, then I'd suggest manually changing the Windows system standby setting to whatever you desire (5 minutes).
Message Edited by rkawakami on 07-20-2009 12:03 AM
Ray Kawakami
X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
Not a Lenovo employee; just a volunteer helping out here
All personal links to PC-Doctor software removed 8/2012 by mfg request

Laptop won't go to sleep mode and shut down properly.

hello, My name is Atul and i upgraded my laptop hp pavilion 15-p017tu from win 8.1 to win 10 on 29h july. My laptop was working great before the upgrade and before upgrading i updraded ( updated ) all the drivers and windows too. so, after the upgrade i have been facing the same problem which has been shared by many peple here..i.e win doesn't go to sleep mode. In my case when ever i put the sys to sleep mode, the screen turns off but the power button doesn't blinks and i can't go back to the normal mode by using mouse curser or pressing the power button back. I have to physically shut down the system by pressing the power button for 5 seconds. Also, my system won't shut down properly and it is the same as the sleep mode probem. I have contacted the customer care of microsoft and hp both and they did some setting changes but the problem keeps coming back. I have also told by the hp care that they will take atleast a month or two to fix this as this may be due to hardware not supporting the current driver so this might take time. They also told me to just downgrade to win 8.1 and after sometime when this poblem is fixed i can again install and upgrade win 10. If any of you guys know how to fix this problem do share it here. thanks!!

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15 p017tu Notebook and issues with the sleep mode and shut down not working correctly. Go into the Device Manger and go to display adapters. Update the driver. Select the Automatically search for updated drivers.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating after Windows 10 upgrades . I hope this helps. Thanks.

Hp Envy + Win 10 -does not wake from sleep mode

Win 10 on HP Envy  Device will not wake from sleep mode must force power off and reboot (hold power button in) Please help! : ) OS Name Microsoft Windows 10 Home
Version 10.0.10240 Build 10240
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name
System Manufacturer Hewlett-Packard
System Model HP ENVY 15 X360 PC
System Type x64-based PC
System SKU G6T84UAR#ABA
Processor Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, 2401 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Insyde F.11, 7/17/2014
SMBIOS Version 2.8
Embedded Controller Version 89.34
BIOS Mode UEFI
BaseBoard Manufacturer Hewlett-Packard
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Mobile
Secure Boot State On
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "10.0.10240.16392"
Time Zone Pacific Daylight Time
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.93 GB
Available Physical Memory 4.89 GB
Total Virtual Memory 9.81 GB
Available Virtual Memory 6.33 GB
Page File Space 1.88 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes  1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number ***listed above 2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system. *** Win 10 3. Have you installed any new hardware on this computer, before the issue appeared? no 4. Have you installed any new software or drivers on this computer, before the issue appeared? Win 10 upgrade from 8.1 Reply

I found a solution. It's still has some bugs to fix but for now, waking it up from sleep works. here's a link to a step by step proceedurehttp://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/windows-10-sleep-mode/td-p/5170873  it worked for me. hope it does for you.

Crio-system in sleeping-mode or software-switching-off ?

Similar Messages

Maybe you are looking for