Proper WSUS+SCUP on SCCM 2012 SP1 with SQL 2012

Been pulling my hair out a new build.
System:
Windows 2012
SQL 2012 SP1
WSUS 4.0
SCUP 2011
WSUS itself will synch if I set source= Microsoft Update.
SCCM SUP will synch with if I set source= Microsoft update.
SCUP will not connect to "update server" in this config.
SCUP will not connect if I check connect to local update server. Nor will it when i try to connect to itself as a remote (ie local host or fqdn in Update server screen)
Now whats weird is if I throw a proxy on my spare machine and aim WSUS and SCUP to use it try SUP to FQDNof SCCM host:8530....I can connect
The problem is with the proxy in play I cannot download Dell catalogs as it used FTP not HTTP (Adobe will download though)
Every so often just for fun it will throw "request for principal permission failed.
Anyone that has this working can you please tell me what you have on each of the SUp. WSUS and SCUP screens

Try running SCUP as administrator. This is usually necessary when SCUP is installed on the ConfigMgr/WSUS server and UAC is enabled. heres a guide that may help: http://www.youtube.com/watch?v=fyEGWSFWyy0 using Group Policy is the easiest wat to deploy
the certificates as well.
Justin Chalfant | Blog: setupconfigmgr.com | SCUP Catalog: patchmypc.net/scup | Please mark as helpful/answer if this resolved your issue

Similar Messages

Reporting Service Error Code 7403, on SCCM 2012 R2 with SQL 2012 SP1 CU6

Dear All,
I am facing issue to install Reporting Services Point on SCCM 2012 R2 with SQL 2012 SP1 CU6. getting error messages id 7403. please let me know if SQL 2012 SP1 CU6 is supported with SCCM 2012 R2 or not & if you have any solution on it.
Error Message: The report server service is not running on Reporting Service Point server "SCCM2012"; start the service to enable reporting.

I am getting below error msg when trying to browse both sites
1) For Reports
The report server cannot decrypt the
symmetric key that is used to access sensitive or encrypted data in a report
server database. You must either restore a backup key or delete all encrypted
content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from
HRESULT:
0x80090016)
2) For Reportserver
Reporting Services Error
The report server cannot decrypt the symmetric key that is used to access
sensitive or encrypted data in a report server database. You must either restore
a backup key or delete all encrypted content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from HRESULT: 0x80090016)
SQL Server Reporting Services

Critical SMS_NOTIFICATION_SERVER ERROR sccm 2012 R2 WITH SQL 2012 SP1

Environement
SCCM 2012 R2
SQL 2012 SP1
On the same server
In sccm console i have in Monitoring - System Status - Component Status
critical SMS_NOTIFICATION_SERVER ERROR
Here are the two error that keep popping up
ERROR 1016
Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in 60 minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Folowing message
ERROR 4951
Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install.
Refer to the BgbSetup.log, the bgbisapimsi.log, as well as the ConfigMgr Documentation and the Microsoft Knowledge Base for further information.
Here are the 2 logs
bgbsetuplog
<02/28/14 09:00:53> ====================================================================
<02/28/14 09:00:53> SMSBGB Setup Started....
<02/28/14 09:00:53> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:TCI-SCCMR2-LAV SMSBGB 0
<02/28/14 09:00:53> Installing Pre Reqs for SMSBGB
<02/28/14 09:00:53>         ======== Installing Pre Reqs for Role SMSBGB ========
<02/28/14 09:00:53> Found 1 Pre Reqs for Role SMSBGB
<02/28/14 09:00:53> Pre Req SqlNativeClient found.
<02/28/14 09:00:53> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<02/28/14 09:00:53> Pre Req SqlNativeClient is already installed. Skipping it.
<02/28/14 09:00:53>         ======== Completed Installation of Pre Reqs for Role SMSBGB ========
<02/28/14 09:00:53> Installing the SMSBGB
<02/28/14 09:00:53> Passed OS version check.
<02/28/14 09:00:53> IIS Service is installed.
<02/28/14 09:00:53> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<02/28/14 09:00:53> New SMSBGB is the same product code. This is a minor upgrade.
<02/28/14 09:00:53> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<02/28/14 09:00:53> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<02/28/14 09:01:01> bgbisapi.msi exited with return code: 0
<02/28/14 09:01:01> Installation was successful.
<02/28/14 09:01:01> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<02/28/14 09:01:04> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<02/28/14 09:01:04> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<02/28/14 09:01:07> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<02/28/14 09:01:07> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<02/28/14 09:01:07> Fatal MSI Error - bgbisapi.msi could not be install
bgpisapi.log
MSI (s) (00:60) [09:01:01:660]: Product: BGB http proxy -- Configuration completed successfully.
MSI (s) (00:60) [09:01:01:661]: Windows Installer reconfigured the product. Product Name: BGB http proxy. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (00:60) [09:01:01:665]: Deferring clean up of packages/files, if any exist
MSI (s) (00:60) [09:01:01:665]: MainEngineThread is returning 0
MSI (s) (00:04) [09:01:01:670]: RESTART MANAGER: Session closed.
MSI (s) (00:04) [09:01:01:670]: No System Restore sequence number for this installation.
=== Logging stopped: 2/28/2014 9:01:01 ===
MSI (s) (00:04) [09:01:01:674]: User policy value 'DisableRollback' is 0
MSI (s) (00:04) [09:01:01:674]: Machine policy value 'DisableRollback' is 0
MSI (s) (00:04) [09:01:01:674]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:04) [09:01:01:675]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:04) [09:01:01:677]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (00:04) [09:01:01:678]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:04) [09:01:01:678]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (00:04) [09:01:01:679]: Destroying RemoteAPI object.
MSI (s) (00:B8) [09:01:01:679]: Custom Action Manager thread ending.
MSI (c) (3C:B8) [09:01:01:686]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (3C:B8) [09:01:01:686]: MainEngineThread is returning 0
MSI (c) (3C:B0) [09:01:01:690]: RESTART MANAGER: Session closed.
=== Verbose logging stopped: 2/28/2014 9:01:01 ===

Problem not fixed SORRY GUY'S
Environement
1 SERVER
WINDOWS SERVER 2012 R2
SQL SERVER 2012 SP1
SCCM 2012 R2
ERROR in system center
Message ID 1016
Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in 60 minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Message ID
4951
Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install.
Refer to the BgbSetup.log, the bgbisapimsi.log, as well as the ConfigMgr Documentation and the Microsoft Knowledge Base for further information.
BGPSETUP.LOG
<03/05/14 09:49:33> ====================================================================
<03/05/14 09:49:33> SMSBGB Setup Started....
<03/05/14 09:49:33> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:TCI-SCCMR2-LAV SMSBGB 0
<03/05/14 09:49:33> Installing Pre Reqs for SMSBGB
<03/05/14 09:49:33>         ======== Installing Pre Reqs for Role SMSBGB ========
<03/05/14 09:49:33> Found 1 Pre Reqs for Role SMSBGB
<03/05/14 09:49:33> Pre Req SqlNativeClient found.
<03/05/14 09:49:33> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<03/05/14 09:49:33> Pre Req SqlNativeClient is already installed. Skipping it.
<03/05/14 09:49:33>         ======== Completed Installation of Pre Reqs for Role SMSBGB ========
<03/05/14 09:49:33> Installing the SMSBGB
<03/05/14 09:49:33> Passed OS version check.
<03/05/14 09:49:33> IIS Service is installed.
<03/05/14 09:49:33> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<03/05/14 09:49:33> New SMSBGB is the same product code. This is a minor upgrade.
<03/05/14 09:49:33> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<03/05/14 09:49:33> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<03/05/14 09:49:41> bgbisapi.msi exited with return code: 0
<03/05/14 09:49:41> Installation was successful.
<03/05/14 09:49:41> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/05/14 09:49:43> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/05/14 09:49:43> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/05/14 09:49:45> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/05/14 09:49:45> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<03/05/14 09:49:45> Fatal MSI Error - bgbisapi.msi could not be installed.
<03/05/14 09:49:45> ~RoleSetup().
BGBISAPI.LOG
=== Verbose logging started: 3/5/2014 9:49:33 Build type: SHIP UNICODE 5.00.9600.00 Calling process: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
MSI (c) (08:C0) [09:49:33:974]: Resetting cached policy values
MSI (c) (08:C0) [09:49:33:974]: Machine policy value 'Debug' is 0
MSI (c) (08:C0) [09:49:33:974]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (08:C0) [09:49:33:974]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (08:C0) [09:49:33:974]: Grabbed execution mutex.
MSI (c) (08:C0) [09:49:34:021]: Cloaking enabled.
MSI (c) (08:C0) [09:49:34:021]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (08:C0) [09:49:34:025]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (C4:E4) [09:49:34:039]: Running installation inside multi-package transaction D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
MSI (s) (C4:E4) [09:49:34:039]: Grabbed execution mutex.
MSI (s) (C4:E8) [09:49:34:045]: Resetting cached policy values
MSI (s) (C4:E8) [09:49:34:045]: Machine policy value 'Debug' is 0
MSI (s) (C4:E8) [09:49:34:045]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (C4:E8) [09:49:34:047]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (C4:E8) [09:49:34:053]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (C4:E8) [09:49:34:057]: SRSetRestorePoint skipped for this transaction.
MSI (s) (C4:E8) [09:49:34:058]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (C4:E8) [09:49:34:060]: File will have security applied from OpCode.
MSI (s) (C4:E8) [09:49:34:065]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi' against software restriction policy
MSI (s) (C4:E8) [09:49:34:065]: SOFTWARE RESTRICTION POLICY: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi has a digital signature
MSI (s) (C4:E8) [09:49:34:067]: SOFTWARE RESTRICTION POLICY: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi is permitted to run because the user token authorizes execution (system or service token).
MSI (s) (C4:E8) [09:49:34:067]: MSCOREE not loaded loading copy from system32
MSI (s) (C4:E8) [09:49:34:077]: End dialog not enabled
MSI (s) (C4:E8) [09:49:34:077]: Original package ==> D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
MSI (s) (C4:E8) [09:49:34:077]: Package we're running from ==> C:\Windows\Installer\3897f9.msi
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall Flags override found.
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall VersionNT override found.
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (s) (C4:E8) [09:49:34:081]: APPCOMPAT: looking for appcompat database entry with ProductCode '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'.
MSI (s) (C4:E8) [09:49:34:081]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (C4:E8) [09:49:34:094]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisablePatch' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (C4:E8) [09:49:34:095]: APPCOMPAT: looking for appcompat database entry with ProductCode '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'.
MSI (s) (C4:E8) [09:49:34:095]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (C4:E8) [09:49:34:096]: Transforms are not secure.
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log'.
MSI (s) (C4:E8) [09:49:34:096]: Command Line: REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR=D:\Program Files\SMS_CCM CCMSERVERDATAROOT=D:\Program Files\Microsoft Configuration Manager USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE
SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 CURRENTDIRECTORY=D:\Program Files\Microsoft Configuration Manager\bin\x64 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=5384
MSI (s) (C4:E8) [09:49:34:096]: Product Code passed to Engine.Initialize:           '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product Code from property table before transforms: '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product Code from property table after transforms: '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product registered: entering maintenance mode
MSI (s) (C4:E8) [09:49:34:096]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (C4:E8) [09:49:34:096]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is admin assigned: LocalSystem owns the publish key.
MSI (s) (C4:E8) [09:49:34:096]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is managed.
MSI (s) (C4:E8) [09:49:34:096]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:096]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (C4:E8) [09:49:34:096]: Specifed source is already in a list.
MSI (s) (C4:E8) [09:49:34:096]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (C4:E8) [09:49:34:096]: Machine policy value 'DisableBrowse' is 0
MSI (s) (C4:E8) [09:49:34:096]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (s) (C4:E8) [09:49:34:096]: Adding new sources is allowed.
MSI (s) (C4:E8) [09:49:34:097]: Package name retrieved from configuration data: 'bgbisapi.msi'
MSI (s) (C4:E8) [09:49:34:099]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (C4:E8) [09:49:34:099]: Machine policy value 'DisableMsi' is 1
MSI (s) (C4:E8) [09:49:34:099]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (C4:E8) [09:49:34:099]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (C4:E8) [09:49:34:099]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is admin assigned: LocalSystem owns the publish key.
MSI (s) (C4:E8) [09:49:34:099]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is managed.
MSI (s) (C4:E8) [09:49:34:099]: Running product '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}' with elevated privileges: Product is assigned.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding REINSTALL property. Its value is 'ALL'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding REINSTALLMODE property. Its value is 'vmaus'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMINSTALLDIR property. Its value is 'D:\Program Files\SMS_CCM'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMSERVERDATAROOT property. Its value is 'D:\Program Files\Microsoft Configuration Manager'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSPORTS property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSPORTS property. Its value is '80'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSSSLPORTS property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSSSLPORTS property. Its value is '443'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSSSL property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSSSLSTATE property. Its value is '0'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMENABLELOGGING property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGLEVEL property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGMAXSIZE property. Its value is '1000000'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGMAXHISTORY property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'D:\Program Files\Microsoft Configuration Manager\bin\x64'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '5384'.
MSI (s) (C4:E8) [09:49:34:100]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '1ea81ab83bbb7c48a58c04b46f112051'.
MSI (s) (C4:E8) [09:49:34:104]: RESTART MANAGER: Session opened.
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:104]: TRANSFORMS property is now:
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (s) (C4:E8) [09:49:34:106]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming
MSI (s) (C4:E8) [09:49:34:106]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Favorites
MSI (s) (C4:E8) [09:49:34:108]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (C4:E8) [09:49:34:109]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Documents
MSI (s) (C4:E8) [09:49:34:109]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (C4:E8) [09:49:34:110]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (C4:E8) [09:49:34:112]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Local
MSI (s) (C4:E8) [09:49:34:114]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Pictures
MSI (s) (C4:E8) [09:49:34:124]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (C4:E8) [09:49:34:128]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (C4:E8) [09:49:34:129]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (C4:E8) [09:49:34:131]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (C4:E8) [09:49:34:132]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (C4:E8) [09:49:34:135]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (C4:E8) [09:49:34:137]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (C4:E8) [09:49:34:138]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (C4:E8) [09:49:34:139]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (C4:E8) [09:49:34:141]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Desktop
MSI (s) (C4:E8) [09:49:34:144]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (C4:E8) [09:49:34:144]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (C4:E8) [09:49:34:144]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (C4:E8) [09:49:34:156]: MSI_LUA: Setting AdminUser property to 1 because the product is already installed managed and per-machine
MSI (s) (C4:E8) [09:49:34:156]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:156]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (C4:E8) [09:49:34:156]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding Installed property. Its value is '00:00:00'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\3897f9.msi'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi'.
MSI (s) (C4:E8) [09:49:34:156]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (C4:E8) [09:49:34:156]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (C4:E8) [09:49:34:156]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (C4:E8) [09:49:34:159]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (C4:E8) [09:49:34:159]: Machine policy value 'DisableRollback' is 0
MSI (s) (C4:E8) [09:49:34:159]: User policy value 'DisableRollback' is 0
MSI (s) (C4:E8) [09:49:34:159]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
MSI (s) (C4:E8) [09:49:34:159]: PROPERTY CHANGE: Adding QFEUpgrade property. Its value is '1'.
=== Logging started: 3/5/2014 9:49:34 ===
MSI (s) (C4:E8) [09:49:34:161]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (C4:E8) [09:49:34:161]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:161]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (C4:E8) [09:49:34:163]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (C4:E8) [09:49:34:163]: Doing action: INSTALL
Action start 9:49:34: INSTALL.
MSI (s) (C4:E8) [09:49:34:165]: Running ExecuteSequence
MSI (s) (C4:E8) [09:49:34:165]: Doing action: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61
MSI (s) (C4:E8) [09:49:34:166]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI (s) (C4:E8) [09:49:34:167]: PROPERTY CHANGE: Adding SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 9:49:34: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
MSI (s) (C4:E8) [09:49:34:167]: Doing action: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61
Action ended 9:49:34: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
MSI (s) (C4:E8) [09:49:34:169]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI

SCCM 2012 SP1 and MDT 2012 Task Sequence Templates, MDT File/Settings Packages

We're setting up SCCM 2012 integrated with MDT 2012 for our OSD. My main issue is finding actual reference material for the MDT task sequence templates when integrated with SCCM. The MDT documentation has a lot of information on variables and task sequences
outside of SCCM integration.
One thing I'd love to find information on is what's actually going on during an MDT Client Task Sequence template. I found this http://social.technet.microsoft.com/Forums/en-US/645a77b2-5be6-431d-818c-57d24b1435cc/understanding-mdt-task-sequence?forum=configmgrosd but
it doesn't delve into the kind of detail I'm looking for. I can dig up information through the MDT reference material on some things, but I just can't find anything out there that actually walks you through an SCCM/MDT task sequence template. For instance,
under State Restore what is being referenced in Install Software with base variable name PACKAGES, vs Install Applications and base variable name COALESCED APPS. And, where are you supposed to put these applications? That's just a specific example, I'm hoping
to find some kind of walkthrough.
Two things I'm hazy on are the MDT packages. What exactly are the MDT Settings Package, and the MDT Files Package? What are they used for? What benefits do you get out of using them? And, how exactly do you use them? I know one of them has something to do
with customsettings.ini, but what's the point of using SCCM with MDT if you still have to muck around in the customsettings.ini file?
Either way, it seems like there are a lot of references to SCCM task sequences, and a lot of references to MDT task sequences. But, not together. Which is a bit annoying since the MDT-integrated task sequence templates are very obviously different than either
SCCM or MDT by itself. Any help would be appreciated, even just information on where to look. Maybe I'm just really bad at finding reference material for SCCM/MDT. Thanks.

When MDT integrated with SCCM, We need the following MDT components to be created:
MDT Boot image
MDT Toolkit Files
MDT Settings
The MDT boot image (for example) gives you extra abilities over the standard ConfigMgr boot image such as the ability to display a HTA Refer here:
http://www.windows-noob.com/forums/index.php?/forum/98-frontends-and-web-services/
MDT Files once created, you will find UDIWizard_Config.Xml file in which you can start User driven Installation OSD using UDI designer.
Refer these links for better understanding:
http://www.windows-noob.com/forums/index.php?/topic/5131-using-sccm-2012-rc-in-a-lab-part-16-integrating-mdt-2012-rc1-with-configuration-manager-2012/
http://www.windows-noob.com/forums/index.php?/topic/5221-using-sccm-2012-rc-in-a-lab-part-17-using-mdt-2012-rc1-within-configuration-manager-2012/
http://www.windows-noob.com/forums/index.php?/topic/5250-using-sccm-2012-rc-in-a-lab-part-18-deploying-a-udi-client-task-sequence-with-mdt-2012-rc1-integrated-in-configuration-manager-2012/
Thanks, Prabha G
Thanks for the quick reply. But, what about the MDT Settings Package? Also, both have a pretty big folder structure for each package. Surely it does more than just provide a couple xml and ini files? I'm not looking for anyone to spoon-feed me the information,
but at least a pointer in the right direction for finding the reference material. It seems for SCCM/MDT integration you have to go all over the place finding scraps of information to put together.
Also, any info on the SCCM/MDT task sequence templates? Thanks.

Backup Sharepoint 2013 Farm with SQL 2012 "Always On" using System Center 2012 R2 Data Protection Manager

Is backing up and Restoring SharePoint 2013 Farm with SQL 2012 "Always On" High Availability now supported using "System Center 2012 R2 Data Protection Manager"?
I cannot find confirmation anywhere.
Regards,
John

Per this thread
http://social.technet.microsoft.com/Forums/en-US/0c047737-4733-4ad5-a24d-3e6e6ff42f70/dpm-2012-sp1-and-sharepoint-2013-on-a-sql-2012-alwayson-ag?forum=dpmsharepointbackup, no it does not look like this is supported.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

File opening throws RBS exception after migrating to a new farm with sql 2012

We have successfully migrated the SP 2010 -sql 2008 r2 wss_content to a new sp2010 farm with sql 2012. The old and new farms are configured for RBS - FIlestream.
In the new farm when tried opening a document we see the below exceptions in event viewer. The documents open fine for admin users and fail for others. I have verified all the permissions on the blob store file location and it looks good. Users have no
issue uploading new files over and below the set the file size limit.
Any suggestions on how to debug this would be great, do we need to rerun the .migrate() to realign any of the blob file references, we played around setting the max file size couple of times.
Event vwr on DB server -
FILESTREAM file named with GUID '00311100-0000-51eb-f3a8-0b387bc5c5ce' that belongs to FILESTREAM data file ID 0x10001 does not exist or cannot be opened.
Event vwr on Front end -
Message ID:20, Level:ERR , Process:10580, Thread:36
Blob store <FilestreamProvider_1> threw this exception:
Operation: Unknown
BlobStoreId: 1
Log Time: 5/5/2014 8:00:49 PM
Exception: Microsoft.Data.SqlRemoteBlobs.BlobStoreException: There was a generic database error. For more information, see the included exception. ---> System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from
the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
   at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
   at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
   at System.Data.SqlClient.TdsParserStateObject.ReadByteArray(Byte[] buff, Int32 offset, Int32 len)
   at System.Data.SqlClient.TdsParserStateObject.ReadInt64()
   at System.Data.SqlClient.TdsParserStateObject.ReadPlpLength(Boolean returnPlpNullIfNull)
   at System.Data.SqlClient.TdsParser.ProcessColumnHeader(SqlMetaDataPriv col, TdsParserStateObject stateObj, Boolean& isNull)
   at System.Data.SqlClient.SqlDataReader.ReadColumnHeader(Int32 i)
   at System.Data.SqlClient.SqlDataReader.GetBytesInternal(Int32 i, Int64 dataIndex, Byte[] buffer, Int32 bufferIndex, Int32 length)
   at System.Data.SqlClient.SqlDataReader.GetBytes(Int32 i, Int64 dataIndex, Byte[] buffer, Int32 bufferIndex, Int32 length)
   at Microsoft.Data.BlobStores.FilestreamBlobStore.FilestreamStoreLibraryBase.ReadBlob(Byte[] storePoolId, Byte[] storeBlobId)
   --- End of inner exception stack trace ---
   at Microsoft.Data.BlobStores.FilestreamBlobStore.FilestreamStoreLibraryBase.ReadBlob(Byte[] storePoolId, Byte[] storeBlobId)
   at Microsoft.Data.BlobStores.BlobStore.ReadBlobInternal(Request request)
BlobStoreException Code: OperationFailedAuthoritative
-Mash "http://sharepointxperiments.wordpress.com"

Migration - its a content db backup/restore/mount to new farm with sql 2012 from sql 2008 r2
Okie here are the results after we tried to narrow down the issue to few steps-
This issue happens on documents that are already existed in the content db prior to migration. we picked two docs from one library. DOC A and DOC B of close to same size..
DOC A - file size 64k, rbs max size set to 1mb.
Regular User and SPAdmin both can open fine, check out n check in successfully.
no entries made in event vwr of front end and DB server
DOC B - file size 64k, rbs max size set to 1mb
SPAdmin - can check out n open fine, but cannot check in back - file not available error
Regular User - cannot open the file - file not avialable at the url
          Both users can view doc properties at lib level..
Errors found in event vwr of DB server -
"FILESTREAM file named with GUID '00311100-0000-51eb-f3a8-0b387bc5c5ce' that belongs to
FILESTREAM data file ID 0x10001 does not exist or cannot be opened."
and
"The operating system returned the error '2(The system cannot find the file specified.)' while attempting 'FsDoHandler::CreateFile' on 'H:\Blob_Store\a06953ae-6f49-43b1-9c2d-fefb13bda9fe\1c581a4a-b450-4143-bc3d-8d419b49b0fb\0000eb20-000066ff-0002'
at 'fstrman.cpp'(2075)."
I incline to believe that the references for documents in blob store could have been corrupted for some documents during the migration. Any new docs uploaded to content or to blob are all accessible fine.
I'm not sure running .migrate() will re align the blob file references? Any ideas on how to effectively get this resolved..
-Mash "http://sharepointxperiments.wordpress.com"

Sql 2008 r2 cluster side by side with sql 2012 cluster on Windows 2008 R2

We have a SQL 2008R2 active/passive SQL cluster running on Windows 2008 R2 cluster.
I would like to add a SQL 2012 clustered instance to the same Winows 2008 R2 cluster.
Are there any issues involved having a SQL 2008 R2 clustered instance running side by side with a SQL 2012 instance in same Windows 2008 R2 cluster?
Are there any pitfalls/"gotchas" to watch for with SQL 2012 cluster install?
Thank you so much!

Hello,
Two instances, one SQL Server 2008 and the other SQL Server 2012, side-by-side, is fully supported.
I would like to recommend you to assign a different port (not port 1433) to the non-default instance
to avoid an IP address conflict between both instances.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Difference between scom 2012 sp1 and SCOM 2012 R2

what is the difference between scom 2012 sp1 and SCOM 2012 R2 ?

What's New in System Center 2012 R2 Operations Manager:
https://technet.microsoft.com/en-us/library/dn249700.aspx

Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2

hello,
We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
Error (10218)
Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
packs are present in Operations Manager :
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
Recommended Action
To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411
Reference link used :- http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
Regards
Richa KM

Have you imported all of the packs it mentions:
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
There's a good walkthrough
here which details all the pre-reqs.
It was some time ago but i also did a walk-through with pictures
http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
Hope this helps

Upgarde SCOM 2012 SP1 to SCOM 2012 SP1 UR5

Upgrade SCOM 2012 SP1 to SCOM 2012 SP1 UR5
We are planning to upgrade our SCOM2012 SP1 to SCOM 2012 SP1 UR5. One of our MS accidentally upgraded to SCOM 2012 SP1 UR4 already. I need to know if I can use the below to upgrade all of them to UR5
http://www.ms-opsmgr.eu/?p=48
Is this the correct path or is there any other documentation or precaution , I need to take

I used this link to update all my SCOM instances to SCOM 2012 SP1 CU5 and it worked fine for me.
http://support.microsoft.com/kb/2904680
Since the these updates are cumulative, I guess one MS already CU4 should not affect the SCOM functionality. But still lets wait for other experts to comment on this.
Thanks, S K Agrawal

Upgrading from SCOM 2012 SP1 to SCOM 2012 R2 what CU do i install? CU5?

Hi,
I just upgraded from SCOM 2012 SP1 to SCOM 2012 R2. What CU version should I install? CU5?
Thanks
K

The most current CU version os SCOM 2012R2 is CU4
You can download it from
https://support.microsoft.com/kb/2906925?wa=wsignin1.0
For detail description of SCOM 2012 R2 CU4, you may refer to
http://support.microsoft.com/kb/2992020
and
http://syscentercldman.blogspot.hk/2014/12/update-of-scom-2012-r2-ur4.html
Roger

Does Lync 2013 work with SQL 2012 always on Feature?

Howdy,
I'm not that even "ok" when it come to SQL :)
so my question Does Lync 2013 Enterprise work with SQL 2012 "Always on" Feature or only Mirroring?
Regards,
T

It will not be supported. Mirroring is your only option.
If a post is helpful, please take a second to hit the green arrow on the left, or mark as answer, thanks.
Jean-Philippe Breton | Senior Microsoft Consultant | MCTS, MCITP, MCT, Lync MVP

Planning System Center Operation Manager 2012 R2 on SQL 2012 Active/Passive Cluster

Dears,
I'm planning to deploy System Center Operation Manager 2012 R2 on SQL 2012 Active/Passive Cluster which have other sql instances running for other applications. And i'm planning to create a new instance for SCOM, kindly provide me recommendation
whether i can install all sql databases for SCOM on same sql instance or does it require separate instances for opsmanger database , dw database and ACS database?
Thanks in advance..

Hi,
Yes, all SCOM SQL databases can run on the same instance of SQL server.
As well, look at some helpful posts for the topic:
http://technet.microsoft.com/library/dn281933.aspx
http://blogs.technet.com/b/kevinholman/archive/2013/10/18/opsmgr-2012-r2-quickstart-deployment-guide.aspx
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

SCCM 2012 SP1 with remote WSUS on Server 2012 and SQL Server 2012

I am rebuilding my SCCM 2012 lab on Server 2012 R2 x64 OS now.
I have 1 primary site, remote SQL server 2012, and remote WSUS server.
Is the WSUS console still required on my primary site running server 2012? If so are the below the correct steps to get this working?
Install Console on primary server:
Go to Server Manager à Add Roles and features, Navigate to the features section.
Remote Server Manager tools
>Role Administration Tools
--Select Windows Server Update Services Tools Only
Are there any post hotfixes to install?
Intalling WSUS full version on remote server:
Go to Server Manager à Add Roles and features, Server Roles section.
Windows Server Update Services
Do I need to select this as well on the remote wsus server? >Role Administration Tools -Select Windows Server Update Services Tools Only
Since my SQL server is on a remote server do I select the below only?
Are there any post hotfixes to install?

Hi,
One Part of the question is already answered. The second part is: If you want to use a remote SQL Server you need to select exactly what you selected in your screenshot.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de

Upgrade of scvmm 2012 sp1 to scvmm 2012 r2 fails with "Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied"

I had a working scvmm 2012 sp1 installation, and am attempting to upgrade to 2012 r2.
The old SCVMM product was removed (retaining the database), as well as ADK 8.0. I then installed ADK 8.1.
The install fails after a number of minutes with "Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied". From my reading of the log, that was the only obvious failure, and that the VMM server MSI installed successfully.
It doesn't appear to get so far as to upgrade the database.
The OS is Windows Server 2012 R2 Standard, with all updates applied. I have tried the install many times, noticed that the McAfee virus scanner was pushed to the box at some point, so I removed it, but still no dice.
12:18:58:LaunchMSI: MSI C:\Users\mscott\Desktop\mu_system_center_2012_r2_virtual_machine_manager_x86_and_x64_dvd_2913737\amd64\setup\msi\Server\vmmServer.msi succeeded.
12:18:58:Doing Postinstall task for PangaeaServer
12:18:58:ProcessInstalls: Install Item VMM management server was successful. We will launch the post process delegate.
12:19:47:Windows feature RSAT-Clustering-PowerShell already enabled, skipping
12:20:15:Windows feature WindowsStorageManagementService already enabled, skipping
12:20:41:Windows feature UpdateServices-API already enabled, skipping
12:23:31:VMMPostinstallProcessor threw an exception: Threw Exception.Type: System.UnauthorizedAccessException, Exception.Message: Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied.
12:23:31:StackTrace:   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
   at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize, Boolean checkHost)
   at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
   at System.IO.StreamWriter..ctor(String path, Boolean append)
   at System.IO.File.AppendText(String path)
   at Microsoft.VirtualManager.SetupFramework.CommonLogger.Log(String trace)
   at Microsoft.VirtualManager.SetupFramework.CommonLogger.Log(LogLevel level, String trace)
   at Microsoft.VirtualManager.SetupFramework.Trc.Log(LogLevel level, String trace, Object parameter1, Object parameter2, Object parameter3)
   at Microsoft.VirtualManager.SetupFramework.Trc.LogException(LogLevel logLevel, String customMessage, Exception exception)
   at Microsoft.VirtualManager.Setup.DBConfigurator.ExecuteScript(SqlContext ctx, String fileName)
   at Microsoft.VirtualManager.Setup.DBConfigurator.UpgradeDatabaseTables()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.CreateDB()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
12:23:31:ProcessInstalls: Running the PostProcessDelegate returned false.
12:23:31:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
12:23:31:SetProgressScreen: FinishMinorStep.
12:23:31:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
12:23:31:****************************************************************
12:23:31:****Starting*RollBack*******************************************
12:23:31:****************************************************************
12:23:31:SetProgressScreen: StartMinorStep.
Mark E. Scott Jr.

Perhaps relevant, perhaps not. This error shows up right after the above log snippet. I assumed it was an error with the rollback routine, but just in case, here it is:
12:23:31:SetProgressScreen: StartMinorStep.
12:23:31:ProcessInstalls: Install Item VMM management server has a Preprocessing delegate of PangaeaServerPreinstallProcessor. Launching it now.
12:23:31:GetSqlLoginName: TThe login name for the vmm server service is [DGSLAB\tfs-vmm]
12:24:49:no HAVMM name detected in DB. Doing VMM Uninstall
12:24:53:Start setspn.exe parameters -D SCVMM/tfsvmm1.dgslab.com DGSLAB\tfs-vmm
12:24:56:Start setspn.exe parameters -D SCVMM/tfsvmm1 DGSLAB\tfs-vmm
12:25:00:DBConfigurationHander.SetupAsVMMServerRole() CarmineException : Threw Exception.Type: Microsoft.VirtualManager.Utils.FailedToAcquireLockException, Exception.Message: Unable to perform the job because one or more of the selected objects are locked by
another job.
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
12:25:00:StackTrace:   at Microsoft.VirtualManager.Utils.CarmineObjectLock.ExecuteAcquireLockSP(CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.AcquireLockWithRetries(CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.AcquireLock(CarmineObjectLockType lockType, Boolean doNotWaitForLock)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer..ctor(RemoteServer server, Guid serverID, Version agentVersion, VersionState agentVersionState, AgentPackageType agentPackageType, Boolean wsManOverSSL, Int32 wsManPort, Nullable`1 complianceStatusID,
Nullable`1 mostRecentTaskID, Nullable`1 mostRecentTaskUIState, Guid taskID, CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer..ctor(SqlRow row, Guid serverID, Guid taskID, CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer.<>c__DisplayClass4.<GetInstance>b__3(SqlRow row)
   at Microsoft.VirtualManager.Engine.DbAccessHelper.GetFromCommand[_RetTy,_ColumnsTy](ReadOption readOption, SqlRetryCommand cmd, GetFromCommandWorker`1 worker)
   at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleReadErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo notFoundErrorInfo)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer.GetOne(String computerName, GetFromCommandWorker`1 ctor, ConnectionProperties properties)
   at Microsoft.VirtualManager.Setup.DBConfigurator.SetupAsVMMServerRole(Boolean isAssociate)
12:25:00:InnerException.Type: Microsoft.VirtualManager.DB.DBCorruptionException, InnerException.Message: Unable to connect to the VMM database because the database is in an inconsistent state.
Contact an experienced SQL administrator whenever this error occurs. In some cases, it may be necessary to restore the VMM database. If the problem persists, contact Microsoft Help and Support.
12:25:00:InnerException.StackTrace:   at Microsoft.VirtualManager.DB.SqlRetryCommand.ValidateReturnValue()
   at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.ExecuteAcquireLockSP(CarmineObjectLockType lockType)
Mark E. Scott Jr.

Proper WSUS+SCUP on SCCM 2012 SP1 with SQL 2012

Similar Messages

Maybe you are looking for