CRM Middleware Monitoring Cockpit
Hi Gurus,
Iam new to the Middleware when i go to the TC - SMWP,
for the Generation Information -> Missing indexes Status is Yellow
for the Runtime Information -> Adapter Status Information -> Parameters in R/3 Backend(s) -> ECC System -> Parameters for object load management Status is Yellow
Does this lead to any problem or not and how to make it green can anybody help me out
Thanks
Hi Devi,
Yellow status means a pending request/Bdoc processing.
Generally, if you have R/3 CRM connection, then yellow means notification is not received from R/3 system since a bdoc being send to R/3 system from CRM system.
can you elaborate upon the description you get for the yellow status bdoc.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>
Similar Messages
-
CRM Middleware Monitoring: Adapter Status Information. Waiting Objects
Hello
I am having a problem sending messages of type RSREQUST from CRM to BW
I have been seeing in the SMWP transaction that we have waiting objects in Request Status of Adapter Status Information.
I dont know how I can start it or solve this error
Thanks in advanced
Best regardsHi,
It seems that the maximum number of parallel processing threads(usually 5) have been set in ur system which is why the objects are in status WAIT. Status WAIT is not an error. To correct, would you check the transaction R3Ar3 for all requests tht are in running status. If you have 5 requests here, abort one or two out of them. Then go to SMQ2 and select the queue tht is in status WAIT. Unlock the queue immediately. It should change to status "READY" and should flow across to BW.
Reward points if it helps !!
Rgds
Priyanka Bansal -
CRM MIDDLEWARE QUERY FOR PRODUCT REPLICATION -URGENT
Hello All,
I am replicating the product categories(in SRM terminology) i.e. initia load of Material groups from backend(R/3) into the SRM system through the CRM Middleware.
At the r/3 side in the tcode SMQ1(Outbound Queue),i am getting the status as STOP while at SRM side(i.e. CRM middleware) in the tcode SMQ2(Inbound queue),i get the status READY.Also when I go in for the transaction of Monitoring Initial Load (R3AM1),I get the status as RUNNING.
Can anyone please tell me how much time it takes to download these objects because I had started the Initial Load for 4 Objects out of which the 1st object took 4 hrs to be downloaded!Please help.
Thanks & regards,
Disha DAlso I got an error in executing the report BBP_PRODUCT_SETTINGS_MW with the foll information text :-
The termination occurred in the ABAP program "SAPLSMSG" in "MESSAGE_STOR
The main program was "BBP_PRODUCT_SETTINGS_MW ".
The termination occurred in line 44 of the source code of the (Include)
program "LSMSGU02"
of the source code of program "LSMSGU02" (when calling the editor 440).
What customizatuon/configuration settings are required for this report to be executed succesfully????
Disha -
Middleware Monitoring (Trn: SMW01) BDoc Msgs
Hi All,
We are currentely working on CRM 4.0 and i am facing an issue in the area of Middleware Monitoring (Trn: SMW01) where we monitor BDoc Msgs. There are aproximately 1000 BDocs in error state with "BDoc Validation Error" for a particular period e.g. from 1st Feb 2008 to 29th Feb 2008.
I was told that i can reprocess them (by selecting some BDocs regularly).
While Reprocessing them there is a pop-up stating "Reprocessing BDocs can cause inconsistency"
But still our team is going for "YES" option.
Can we do this?
or Is there any other way we can make them clear. Kindly advise me in this issue. It is bit URGENT and need to be addressed immediately.
Thanks and Regards,
Ramana RaoHi
It is not suggested to reprocess the error BDoc.
BDocs in Error status should be marked as deleted to avoid re-processing that might lead to inconsistencies.
By marking the BDoc as deleted saving its IDs the object ID is added to the BDoc Recovery Work List which allows for further analysis in transaction SMW3RC.
Two main selection options are possible from SMW3RC: Displaying the work list and displaying the process list.
The work list is the list of BDoc messages which needs to be recovered. As soon as a BDoc message is deleted in SMW01 by saving the identifiers, it is stored into that work list.
This list can be analyzed by the administrator who must decide which operation is adequate for processing the data. Possible operations are:
1. Extracting the data from CRM (Post)
2. Create a Request from R/3
3. Create a DIMA comparison
4. Mark the BDoc message as completed
As soon as the administrator has selected the desired operation, the entries are removed from the work list and stored into the process list.
From the process list, it is possible to start the desired operation.
For mass processing of the process list use transaction SMW3RCW -
Middleware Monitoring--Exchange Object Name
Hi
I am monitoring CRM middleware. In tcode SMW01 Iam getting an error as "Partially send, receivers have errors". Its long text indicates "Exchange object name could not be determined". Anybody knows wht this exchange object is and how to solve this error.
Useful suggestions will be awarded.
Regards
DeepikaHi all,
Can anybody who have worked with middleware tell why the problem is appearing?
Thanks
Deepika -
Using SAP PI instead of CRM Middleware
Hi experts,
Is it recommend to use SAP PI instead of SAP CRM Middleware.
If yes how can I do that.
I have read in forum requests that it can be implemented by using iDOC instead of BDocs.
I need a technical guideline how data (eg. Business Partner Data) can be tranferred from CRM to other ERP System.
Thank you for help.
Greetings
Mario
Edited by: Mario Bauer on Jun 22, 2010 9:24 AM
Edited by: Mario Bauer on Jun 22, 2010 9:28 AMHi!
SAP PI itself is a middleware Product but very roboust and capable enough to integrate any system to any other system, either it is SAP or Non-SAP. And there are two ways to integrate other ERP System to SAP CRM using SAP PI.
1. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message using the Middleware XIF adaptor and convert the incoming XML Messages in the BDocs and the BDocs upload the data in the SAP-CRM Data base.
2. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message and using the Functional Module convert the data into the BDocs and the BDocs upload the data in the SAPCRM Data base. In thsi situation, you need an expert ABAP Consultant to write the accurate functional Module.
The data inside the SAP_CRM System always transported in the BDocs not in Idocs. It is the BDocs data containers which transport the data from CRM Middleware to CRM Database and CRM Database upto CRM Middleware. -
Version Compatibility of SAP R/3 4.6 C with SAP CRM 5.2 + CRM middleware
Dear SDN team,
We are trying to Integrate SAP R/3 4.6c with SAP CRM 5.2 using CRM middleware.
We wanted to know the following :
1.Technical and Functional feasibility in integration of CRM 5.2 and R/3 4.6c. What are problems for these versions ? ( In Brief )
2.We are trying to move the Objects BP , Quotes and Products from R/3 to CRM 5.2. Has anyone done this and can someone give us a brief description of the problems while doing the same
3.Any other useful suggestions would be very helpful regarding CRM middleware.
Kindly reply on this post . Points would be awarded.
Thanks and Regards
Dinesh and Ritvij
Email : [email protected]Hello Ritvij,
Regarding middleware ,are you down loading plants? bacause down load object objects DNL_PLANT is obsolete.
Unusable middleware objects :
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
and the master data objects
MATERIAL
SERVICE_MASTER..
Find composite note for middleware at 872533..
What is the leading system for Order creation?
Please refer notes 490932 for more info about transactional doc replication between the two systems.
Please assign points.
regards,
Muralidhar Prasad Chatna -
Hi guys,
I configured the CRM middleware component to replicate materials,services and config objects but in the SMOEAC trx, on site selection, there only appears the CRM site, but not the R/3 backend site.
Table SMOF_ERPSH shows the following:
RFC DEST ERP RELEASE ERPLOGSYS SITETYPEID
none -- - CDB
SRP 700 SRP CRM
SRP is the Destination RFC defined in SAP R/3 and also the logical system ID of our SRM 5.0 System
What went wrong? How to resolve it?
Thanks for any help.
AartHi Consultoresvision,
Can you pl. tell me what configuration you need to maintain for CRM middleware components.
After client copy for SRM 4.0 from Production to QA, the SMOEAC is totally erased and there is no objects. I am aware of how to create sites for R/3 and SRM after the object of "Site" is available. But here the object "Site" itself is missing.
Any inputs would be appreciated.
Thanks
Venkatesh -
Is CRM Middleware Expertise Required if no R/3 Is In Scope?
Hello CRM Community,
I'm an XI developer, and I'm trying to get a handle on exactly when CRM Middleware (& thus a Middleware Resource) is required, and when it is not.
If a customer is implementing CRM 5.0 (with IC Web)in a landscape with non-SAP applications, would they necessarily require a Middleware consultant?
And if so, to what extent would that requirement be reduced in comparison to an implementation which interfaces to R/3?
Thanks in advance,
JimmyHi,
CRM middleware is used in CRM whether or not the system is linked to other systems (SAP or non-SAP). CRM is based on it. Eg. whenever you create or change an object in CRM, a bdoc is created which contains the data.
The question is whether you'll need to use, influence or change the middleware in your project:
Image having integration with R/3: then you'll need the middleware for setting up the distribution (initial/delta load) between CRM & R/3. But as long as you stick to the standard solution, this will be very easy to setup.
Imagine having integration to other systems: then you'll need the middleware to interface to them (which can be done using idocs or XML).
Imagine having a CRM-MSA implementation: then the middleware is used to send data to the MSA client. This means setting up the data-distribution to the clients, which can be quite complicated.
Imagine having a stand-alone CRM system with an IC webclient and flows limited to the CRM system: then a middleware consultant won't have to much work.
Michael. -
How can I send an update to CRM Middleware after changing BUPA longtext
Hi folks,
I am looking for the easiest way to send an update/insert of BP longtext change to SAP CRM Middleware (& MobileSales). I have implemented save of the text with function save_text within of a CRM application for changing bp data.
Text is available to standard CRM transaction bp, but now updates have been send to subscribed Mobile Sales clients.
I have already checked the bapi_bupa* functions, but it seems that they contain no notes/longtext segment.
Thanks for any help.
DanielHi Daniel,
just wondering if you had a solution for this as I have the same issue to solve as well.
thanks, regards. -
Notes on CRM Middleware and other
I am after some notes on CRM. Please can someone kindly send me the notes on CRM Middleware (CRM500) and CRM Services (CRM700) and any other similar notes.
My email is [email protected]
Thanks in advance,
RuongHi Amit,
I appreciate if you could send me CRM middleware document to me as well @ [email protected]
thanks,
Amit -
Regarding CRM middleware and XI
In SAP CRM middleware acts as a heart of CRM.
that means communications with CRM server from any other server is through middleware,right?
In netweaver ,XI acts also the same like the integration server.
right?(both SAP and NON SAP server)
please explain the above two statements clearly.
thanks in advance
kpsmoorthy.The role of CRM "middleware" vs XI is often misunderstood.
Let's go back many many years and understand why we have CRM "middleware".
Before XI even existed SAP had to have a way to transfer data between an R/3 system and the CRM system. The CRM system needed to have a "replica" of the necessary master data to capture sales orders for e-commerce or mobile sales. Thus SAP created the "middleware". The middleware consist of a new dimension "plugin" on the R/3 system and code on the CRM system, built upon the concept of queued RFC. Basically the standard transactions such as XK01, XD01, VA01, etc. were modified to generate bdoc's whenever data was changed or created. These changes then flowed to CRM via queued RFC.
CRM middleware primary goal was to receive data from R/3 and to send data back to ERP. In release 3.0/3.1 it was expanded to allow external systems to receive and transfer data into CRM via the XIF adapter. After the XIF adapter was released, SAP introduced the XI system. The XI system was designed for integration between systems. However the CRM middleware being robust and not requiring extra systems still exists. If you want to integrate one SAP CRM system with an SAP ERP system then the "crm middleware" is the application tool that is isued.
If you need to integrate SAP CRM with external systems then you would use a combination of XI + the CRM XIF adapter. In CRM 52/60 you can use the web services toolset in addition to the XIF adapter.
To summarize:
"CRM Middleware" - Specialized integration scenario between SAP CRM & SAP ERP
XI - your integration server that can do a lot more than "crm middleware".
Take care,
Stephen -
CRM Middleware Documentation and Training
Apologies as this is not a technical/functional question as such but I have been looking for SAP CRM Middleware documentation and/or training courses on the subject.
Particularly in relation to integration with Microsoft Exchange Server
So far I have found documentation on help.sap.com but little else. Nothing on integration with MS Exchange.
Firstly, does anyone know of any other good sources where this type of information can be found?
Secondly regarding training, the only course I have found has been the CRM Basics 5 day course that covers Middleware, but I don't know how in depth or even if it covers integration with Exchange.
Is anyone aware of any good CRM Middleware courses, preferably in the UK?
I would be grateful for any kind of help?
Many Thanks
DavidHi,
Check out
http://help.sap.com/saphelp_crm50/helpdata/en/2b/0bc5de1814b34b8f453fa5b07b8739/frameset.htm
Middleware courses are available:
CRM500(overview) & CR550(enhancements) & some mobile integration courses, but none of them realy cover groupware integration.
It's a pretty new functionality...
Michael. -
CRM to R3 partner flow via CRM Middleware ...
Hi all ,
Any one can tell me where the setting of the filter in standard has been done for the fields of the BUT000 which flows to ECC R3 in the middleware .
Actually the requirement is to send some specific data of all the ship_tos which is created in CRM .
It would be even greate if any one can share the document of CRM Middleware which will give from the basic of the Middleware configuration ,Adapter objects ,attribute settings .
Thanks ,
Kashim RajaHi Kashim,
You can maintain the filter settings for business partners in TCode "R3AC1". Please select the Business object "BUPA_MAIN", click on filter and maintain the required filters under "Table structure within object" for BUT000 table.
Please refer this help portal for more info :
http://help.sap.com/saphelp_crm70/helpdata/EN/56/6b34429cb0907ce10000000a114b1d/frameset.htm
http://help.sap.com/saphelp_crm70/helpdata/EN/1d/09d1e713d711d6999e00508b6b8a93/frameset.htm
Regards,
Chethan
Edited by: Chethan Kumar C M on Sep 27, 2009 7:46 AM -
Why we need crm middleware for material replication?
Hi Experts,
Why we need CRM middleware for material replication from ECC to SRM when we can do the vendor replication from ECC to SRM with ABAP report? IS there any technical limitation?
Thanks and regards,
RanjanHello,
Vendors and locations, for example, you can replicate from ECC to SRM using ABAP reports.
However, if you want to replicate the following information, you should use the middleware:
- DNL-CUST-BASIS3 - Basis CRM online
- DNL-CUST-PROD0 - Material number conversions
- DNL-CUST-PROD1 - Product : categories
- DNL_CUST_SRVMAS - Customizing: Service Master
- MATERIAL - R/3 Material Master
- SERVICE_MASTER - R/3 Service Master
Check note 872533. It provides more information.
Regards,
Ricardo
Maybe you are looking for
-
Hello, We are facing problems in our website with the new text layout framework. Text wrapping is not functioning. Arabic text is being shown right to left and everything is fine except when we have an arabic article which includes long sentences tha
-
How do i get "locked" items out of my trash OsX 10.7.5
I have some items my trash that are locked. I've tried unlocking them via preferences but still cannot delet or restrore to clear the trash. Any help would be greatly appreciated. Mulletboy
-
Is there a video tutorial which shows how to manually assign pages to menu items?
I have a need to build out two separate menus. In order to do that, I need to be able to manually assign pages to the menu. Thanks
-
I downloaded a document from a website into a PDF file. It was a 6 page document, but I want to only send page 1 of the document. I don't know how or if it can be done.
-
*.docm CANNOT USE MACROS IN WORD 2010
Hello everyone This is my first post in this community, so if there's anything that is not correct admins please feel free to move the post to where it should be :) So I work at an office and there are a lot of users. There is a department in the off