Cropping in premiere pro 2.0

Hello,
I'm having the hardest time taking a 1440x1080 video and cropping a 1024x768 sub-area and saving it with those dimensions. One problem I run into is that the crop effect is set to crop by percentage and I couldn't change it to crop by pixels. The help pages say that both are possible but after testing every button I could find and looking all over the internet, I still couldn't figure it out.
Another issue is that assuming I can crop the video, how do I save it as 1024x768? When I initially open the project, should I set Desktop editing mode to 1024x768, resize the image after cropping, and save, or should I set Desktop editing mode to 1440x1080 and save as 1024x768?
I've spent all day trying different things and haven't figured it out. I looked all over the adobe forum boards and FAQ pages but unfortunately there were no solutions for this issue that I could find. Any help would be very, very appreciated.
Best,
Adam

Adam,
Exporting to DV AVI limits you to the defined DV resolution, 720 x 480 NTSC or 720 x 576 PAL.
Notice that I mention DV AVI, not AVI. AVI is just a container and the relevant issue is the codec used within that container. DV has a predefined resolution. WMV is more flexible in that you can define the resolution required.

Similar Messages

  • Vob videos get cropped in Premiere Pro CC upon importing

    At importing Vob videos (format 720 x 576) they get cropped to 520 x 576.
    I tried with various videos and it happened with all of them.
    This seems to be a premiere pro CC bug as it doesn't happen in Premiere Pro CS6, where they import fine.

    Thanks for your answer John.
    I read the link you posted and I have also posted a bug report.
    The cropping happens at the importing, not at the sequence editing or exporting. It is the source video that is cropped when imported.
    Although they talk about other video formats this seems to have happened to other customers:
    http://forums.adobe.com/message/5659250#5659250
    Again, thanks for your answer.

  • How do I crop a frame in Premiere Pro CS6?

    In FCP, you can crop a frame by going to wireframe and simply adjusting it to crop the image area you want to show. I want to maintain 16:9 but simple make the clip 'zoomed in' to an area that I want. It won't be too drastic of a crop. Does Premiere Pro have the ability to do this?
    TIA,
    Ken

    I see that, like the beginner that I am, I used the wrong terminology. Crop does indeed crop, but, working in print media for most of my life, what I was looking for was to seclect a portion of the view and 'enlarge it' to fill the frame with some selective positioning of the area to be used. It might be more correctly called 'zooming in' on an area of the original frame, and also filling the frame with that selected area. I hope that this helps give an idea of what I am after.
    Another way of putting it might be like a car in the distance coming at the camera and then getting close to the camera. With that scene, what I would want to do is start by filling the frame with the car in the distance and keyframe a 'zoom out' effect that would keep the car filling the screen and eventually wind up with the car close to the camera. So the car would be big, filling the frame, all the while it was coming toward the camera. I belive this would be called starting with a full zoom and then 'zooming out' until the car was at the point near the camera.
    PS: after trying everything again, I see that 'Scale' is indeed the answer to what I wanted. Keeping things centered on the screen is a trick and I've added many keyframes, almost at every frame in one instance, to keep the subject centered on screen. Also, I see that 600% is the maximum scale I can use to start with, so some responsibility must lie in the hands of the videographer and the zoom lens on the camera.
    Any comments you have to possible help as I flounder with my beginning efforts would be appreciated. I believe control will come if I put the time in now.

  • Adobe Premiere Pro Automatically Crops Source Video Upon Import

    This is really confusing me and I've never had this kind of trouble before.  I have source videos that are 720x480, but as soon as I import them into Premiere, they are cropped to 540x480.  It's not a problem with sequence settings or anything, because the imported source file is cropped before it's even in a sequence.  I tried looking on-line for a solution, but couldn't find any.  Does anyone know how this can be fixed...maybe some import settings that I don't know about?
    Here are some screenshots to visually represent what I was saying:
    This is properties of the video
    This is what Premiere automatically does right after the video is imported as a source
    This is a screenshot when played with VLC:
    This is a screenshot when played from the source in Premiere:
    Any help with this would be greatly appreciated.  This video is due Saturday and all my footage is cropped, please help me.  Thank you!

    11.  Re: Adobe Premiere Pro AND Adobe Premiere Elements 13 Automatically Crops Source Video Upon Import
    My AP Elements (version 13) has exactly the same bug. I have a DVD where 25% of every VOB file's images' right border has been cut away during the inserting phase into Elements. No adjusting of frame and pixel aspect ratios, black borders narrow or wide, project settings automatic or manual do not help. Gone is gone. But the same VOB files play normally (100% image) in many other players/editors. I have experimented with VLC and Wondershare Video Converter. 
    On the other hand Elements is able to read correctly other DVD's VOB files. See discussion about this very same bug in Elements thread.

  • My crop tool isn't visible in the effects controls of Premiere Pro.  Where could it be?

    I've just downloaded Premiere Pro CS6 and it's all up to date.  When I go to the effects controls to crop a graphic the "crop tool" is not showing as in it's simply not there.  To be clear, it's not there at all, no selection for a drop down.   Is there some where that I need to access to make it show up or what?  The motion, scale, opacity, etc are all showing as an option, but not the crop tool.

    I just did that write before I read this post.  I was going on here too delete this, but saw you answered it!  That's exactly what I did.  I've been watching tutorials and they show it as if it automatically shows up in Effect Controls...

  • Is there any way to create a custom timecode in Premiere Pro?

    I mean going beyond the standard controls in the Timecode effect.
    I have a video project where I need to actually show time elapsed to demonstrate a process happening in a timelapsed video. In other words, this isn't just for editing/syncing purposes; the final video needs to display how long the events in the video are taking to complete, like a chronometer, and I want more control over its appearance.
    For example, I want to strip out the Hours and Frames so all I have left is MM:SS in the display, which I've fudged for the moment by putting the timecode in a seperate sequence and cropping it. I'd also like to be able to choose the color, font, etc. of the digits display and to put something behind it other than the built-in semi-transparent gray background.
    I almost need to be able to insert the timecode into a Title as a special character, like you'd do for page numbers in a text document.
    If this simply isn't available in Premiere Pro but there happens to be a solution in, say, AfterEffects, or any other CC software, I would be fine with that.

    Simple to to in After Effects, you can control a text layer with expressions scripting to get it to do whatever you want.
    e.g. http://www.motionscript.com/design-guide/up-down-clock.html

  • Importing AVIs into Adobe Premiere Pro CS3 !!!

    Heres what Im trying to do: We have been working on a PC Leitch Velocity Q NLE system for the past couple years and just got 2 new Matrox Axio LE NLEs with Adobe Premiere Pro CS3. We are trying to get all our old projects from the Velocity system onto our Matrox systems and not sacrifice any of the video quality. I've been thinking that the best way to do this is by compressing old projects to AVI format from the Velocity system and move them over to the Matrox using an external hard drive.
    I was actually able to bring in an AVI from the Velocity system onto the Matrox yesterday using the same Velocity settings below, except that I changed the aspect to 720 x 480 and the audio sample rate to 48,000. When playing the video on the timeline in Premiere the video looked great on my computer monitor but on my external NTSC monitor all motion in the video looked a little jerky as if frames are missing. I tried importing the test clip into both Matrox uncompressed 8-bit and uncompressed 10-bit projects and had the same resulting jerky looking video. Even after rendering the clip the video looked the same. Then I tried exporting the clip to mpeg using the Matrox media encoder but saw no change in the jerky movement. Here are my project and export setting for both systems.
    The AVI was made on a PC Leitch Velocity Q NLE system. My project settings on the Velocity system are;
    29.97 drop frame
    720 x 486 24 Bit
    Interlaced field order B
    Sub pixel off Cropping off
    Audio:
    16 sample
    44 / samples / second
    2 channel
    Export settings are; (These are the settings I was trying the first time that didnt work. All I changed the second time was the aspect ratio to 720 x 480 and the audio sampling rate to 48.)
    AVI
    Frame rate 29.97
    720 x 486
    No Compression
    Color 24 Bits
    Field handling interlaced field order B
    Audio:
    16 sample
    Sampling rate 44
    2 channels stereo
    Do you recommend compressing the video coming out of Velocity?
    There are a couple other options other than No Compression in the export dialogue such as: Microsoft H.263 video codec, Microsoft H.261 video codec. I definitely want to maintain the highest quality possible.
    Matrox Axio LE project settings
    Editing mode: Matrox NTSC
    Timebase: 29.97 fps
    Video
    Frame Size: 720 x 486
    Pixel Aspect Ratio: D1 / DV NTSC (0.9)
    Fields: Lower field first
    Display: Format 30fps Drop Frame Timecode
    Audio: Sample 48,000 Hz
    Display: Audio sample
    Video Rendering: Maximum bit depth is Unchecked
    Previews: File format Matrox uncompressed 8-bit NTSC (tried Matrox uncompressed 10-bit too.)
    I think the jerky video might be due to dropping frames but Im not sure.
    Any help is greatly appreciated!

    While it seems that the field order is consistent, I have seen issues where converting from clips that change field order creates this sort of problem. This is particularly obvious when converting from MJPEG codecs like Meridien or Miro/Pinnacle to DV.
    What happens if you just import the files into Premiere and let it do the rendering to the project settings?

  • Poor still image quality in Premiere Pro

    Hi, I am new to Premiere Pro. A couple of weeks ago I made 2 slide shows using still pictures from a school trip to Washington DC. I added .m4a audio files and they look great. Today I made 3 more slide shows, same sources, but the picture quality isn't there. It seems I must have changed something? The quality of the pictures varies, as they come from different cameras, but when I have a high quality picture - for example 5 MB - that looks great in Windows Photo Viewer, it still looks bad in Premiere Pro. I'm using Fit and Full, pictures look bad in the smaller window and when viewed full screen. This is before any exporting.
    It occurs to me that I didn't know about rendering until I watched a tutorial, now when I make changes I hit enter to render. Could that have anything to do with it? I see my Arlington video isn't rendered now (shows red sections), and it's one of the ones that looks good.
    Typically when I create a project I choose Frames for Display Format and HDV for Capture Format. I don't see any differences between the old and new projects.
    I'm supposed to hand out DVDs at school tomorrow, it's the last day so I need help! Thanks

    The list is valid if you save the file in square pixels.
    However, I believe there is an easier way if one has
    Photoshop.
    In Photosohop, you can change the image pixel
    aspect ratio directly.  The drop down for that parameter lists common video formats.
    Change the PAR first (e.g., 1.33)  and then, using the crop tool set for the frame dimensions, e.g., 1440 x 1080.  Save the file.  Premiere will recognize the image format.  There's no reason to keep track of what the square pixel frame size is.
    You can create Photoshop Actions to somewaht automate this process.

  • Still image sizes in Premiere Pro CS5.5

    I've been looking for quite a while on Adobe's help pages, these forums, and also the PDF manual, but can't find the info I'm looking for.
    I'm moving from Final Cut Studio to the Adobe suite of video production for various reasons. I've purchased (though not yet received) the Production Premium upgrade. I have a new project I'm starting, and want to correctly size my images for Premiere Pro. For instance, Final Cut Studio has this handy chart:
    The video sequence frame size
    If you are using this format                               is                    Use graphics with this frame size
    CCIR 601 NTSC 4:3                                  720 x 486                             720 x 547
    CCIR 601 NTSC 16:9 anamorphic               720 x 486                             853 x 486
    DV NTSC 4:3                                            720 x 480                             720 x 540
    DV NTSC 16:9 anamorphic                        720 x 480                              853 x 480
    CCIR 601/DV PAL 4:3                               720 x 576                              768 x 576
    CCIR 601/DV PAL 16:9 anamorphic            720 x 576                             1024 x 576
    720p HD                                                  1280 x 720                            1280 x 720
    1080i or 1080p HD                                   1920 x 1080                          1920 x 1080
    So for a standard 4:3 DV NTSC video, I make my still images 720 x 540 pixels. 16:9 anamorphic, 853 x 480.
    For whatever reason, this type of information is completely missing in the manuals for CS5.5. I did however find this information related to Premiere Pro 4:
    4:3 DV (NTSC) or ATSC SD—create and save the square-pixel file at 720x534.
    4:3 D1 (NTSC)—create and save the square-pixel file at 720x534.
    4:3 DV or D1 (PAL)—create and save the file at 788x576.
    16:9 DV (NTSC)—create and save the file at 864x480.
    16:9 D1 (NTSC)—create and save the file at 872x486.
    16:9 DV or D1 (PAL)—create and save the file at 1050x576.
    16:9 1080i HD—create and save the file at 1920x1080.
    16:9 720p HD—create and save the file at 1280x720.
    So did this apply to CS5.5 as well? Meaning if I'm creating a standard 4:3 DV NTSC video, my still images should be 720 x 534, and 16:9 anamorphic 864 x 480? Not quite sure what the distinction is between DV and D1, other than the anamorphic sizes are different.
    I also know these are different from Final Cut Studio. In Apple's manuals, they come right out and say the pixel sizes FCS uses for stills are different from most video editing software. So I'm not surprised to see 720 x 534 for for 4:3 NTSC in Premiere Pro rather than Apple's size of 720 x 540.
    Thanks.

    The list is valid if you save the file in square pixels.
    However, I believe there is an easier way if one has
    Photoshop.
    In Photosohop, you can change the image pixel
    aspect ratio directly.  The drop down for that parameter lists common video formats.
    Change the PAR first (e.g., 1.33)  and then, using the crop tool set for the frame dimensions, e.g., 1440 x 1080.  Save the file.  Premiere will recognize the image format.  There's no reason to keep track of what the square pixel frame size is.
    You can create Photoshop Actions to somewaht automate this process.

  • Premiere Pro CC's Warp Stabilizer BUGS...see for yourself. (7.0.1 & 7.1)

    I'd love to hear from Adobe Staff on this one. Hopefully they can focus on fixes over features for the next update, especially for one it's most touted effects.
    Warp Stabilizer works great at stabilizing clips in Premiere Pro CC...but I'm beginning to learn that it's quite buggy. The two bugs below simply cripple the user experience when you use the effect a lot like we do. Here's a link to a sample project with just 2 clips (around 1 minute in length each) on two separate timelines with each clip stabilized using the Warp Stabilizer effect. It's only a sample/test project meant to show the issue which can be MUCH larger in a longer/bigger project. Relink to any longer media and you'll quickly see what happens when you have multiple warp stabilizers applied to a Premiere Pro CC project and how problematic it can be.
    https://dl.dropboxusercontent.com/u/105331144/Warp_Stabilizer_SAMPLE_Project.prproj
    See for yourself.
    Two VERY Annoying BUGS and One Unfortunate Feature:
    BUG #1: (It affects 7.0.1 and the new 7.1 Release/Update)
    1) With GPU Acceleration Enabled and both sequences open, once the timeline render bar has turned yellow, hit save.
    2) Now toggle to the 2nd sequence and you'll notice a delay/freeze as the render bar switches back to red and then yellow again.
    3) Now toggle back to the other sequence and you have the same thing occur. Then, you can toggle back and forth with no delay...until...the project saves (or auto-saves) again...and then the delay/freeze will happen all over again.
    4) Side Note: Even when you right-click on the sequence in the Project window, there's a delay. Right-click on a sequence with no Warp Stabilizers and the drop down list pops up immediately.
    What's the Big Deal?: When you have tons more warp stabilizer effects applied to multiple sequences, not only does it take a while to save, but when it does, you are forced to wait while Premiere Pro freezes momentarily. This affects AUTO-SAVE too!!! The more warp stabilizers, the longer the wait. Our sequences have delayed up to 30-40 seconds depending on how much we've used warp stabilizer in each sequence. Imagine if you have Auto-Save set to every 30 minutes or less, well that means that every 30 minutes or less you'll be forced to stop while premiere freezes up for 30-40 seconds or so (depending on how much this effect is used). Other effects do NOT have this issue.
    BUG #2: (It affects only the new October Release/Update of Premiere 7.1...this issue is NEW and does NOT occur in 7.0.1!!!)
    1) Take the above project into Premiere Pro CC 7.1 (again, this does NOT occur in the previous 7.0.1 release) and hit FILE>EXPORT>Media.
    2) You'll notice a delay while the EXPORT SETTINGS popup opens.
    3) Toggle to different "FORMATS" in the export settings window and there's more delays every time the format is switched.
    What's the Big Deal?: Again, this is a small sample project. When you have a much bigger project with lots more Warp Stabilizers applied to many more clips this "delay" can extend up to several minutes!!! Yes, on a recent project over an hour with MANY warp stabilizers applied to lots of clips, it took 7 minutes for the Export Settings window to pop up after hitting EXPORT>Media. And there was about a one minute delay now when switching formats. This occurs whether GPU Accleration is enabled or not. It ONLY occurs on Premiere Pro CC 7.1
    UNFORTUNATE FEATURE #1:
    We obviously use Warp Stabilizer A LOT. It's a great effect. The above bugs cripple the user experience. This last issue isn't a bug, but rather a default setting on Premiere Pro's warp stabilizer that should be changed. Within the settings of Warp Stabilizer there's a section called "Method". The default setting is "Subspace Warp". That sounds pretty cool. But in practice, and we have had lots of practice (eg. THOUSANDS of clips stabilized in just the last few months alone (no exaggeration)), we've found that switching the default method to "Position, Scale, Rotation" is a MUCH more effective way to stabilize a clip. Most of the time it cuts down on that "wobble" that you might see in complex moving clips...but more importantly, 9 out of 10 times it crops the video either the same or less than when you use the default method. By "crops less" I mean that the "Auto-Scale %" is less. Of those 9 times, I'd guess 7 or 8 of them would crop in on the video less while the other 1 or 2 times there would be no change to the Auto-Scale %. Less scaling = better.
    What's the Big Deal?: Well, as cool as Subspace Warp sounds, our numbers don't lie. Again, we use this effect on HUNDREDS of clips every week. When you have to go into hundreds and hundreds of clips every week and keep switching the setting so the effect will work better, it gets old real fast. We end up wasting so much time doing this but it's worth it because the results are undeniable. Why not create a CUSTOM PRESET???! Well, that'd be nice if it worked...but it doesn't. The problem with a custom preset like that is that when you drop it on a clip, it doesn't activate/analyze the clip automatically so you have to manually go into the settings and hit analyze which negates any time saved. It's be great if the default "method" was simply changed to Position, Scale, and Rotation. Or at the very least, it'd be great if one could create a custom preset that would automatically activate/analyze the clip it's dropped on (just like the original effect does). 
    (BONUS FEATURE: It'd also be nice to have the ability to set a "max scaling %" too so you never crop in more than a preselected amount...but first things first...fixes over features.)
    NOTE: I'm on a 2011 suped up iMac running OSX 10.8.5

    [r]Evolution wrote:
    Would it help to  Render these Warp Stabaliized clips instead of leaving them in the sequence w/ the Effect applied?
    Any way to "Batch" Warp Stabalize your media before editing so the effect is not needed during the edit?
    Sounds like you guys could benefit from having your shooters use a "Stabalizer".
    Thanks for the rendering tip rEvolution. Rendering the clips does help with BUG#1, however, I'm not sure if it would truly save us any time because of the constant need to render and rerender tons of very short clips with this effect as we make adjustments to the edit. Warp Stabilizer is GPU Accelerated so playback is really smooth which is great but why does saving a project have any effect on this and cause it to freeze up? And then it works great...until the next time the project is saved. Using any other effect, there is no issue (that I've found) when a project is saved or auto-saved.
    Rendering unfortunately has no effect on BUG#2 in Premiere 7.1 (again, this bug/issue did not occur in Premiere 7.0.1)
    Regarding "batch" stabilizing...I'm not entirely sure what you mean. We do stabilize dozens of clips at a time before editing because it's imperative for us to know which clips (the sections we've pulled) will stabilize effectively. And then once the longer edit is complete we end up pulling all the best shots from that long sequence and copy/paste it to another sequence to make a 2nd shorter edit.
    To say we've gone back and forth about the use of stabilizers would be an understatement. The fact is that we've spent almost 4 years creating a unique way to shoot based almost entirely around the effectiveness of warp stabilizer. It's taken years of trial and error but our style of shooting effectively allows us to mimick and thus replace the need for stabilizers, sliders and cranes. The extra freedom allows us to get MUCH more varied coverage of live events. It's different, I know, but it's fun and rewarding having a unique style. Granted the extra work is passed on to the editing side, but it's worth it IMO especially if these issues were addressed/fixed.
    Regarding the "unfortunate feature" I mentioned, I would be satisfied knowing the default method works great for others if one were simply able to apply a custom preset of the clip with the adjusted method and it activated automatically and began analyzing the clip without the need to manually go into settings and hit analyze. That would be nice.
    Thanks again for your input.

  • Does Premiere Pro support a "self-record" mode?

    Does Premiere Pro support a "self-record" mode? It would record a new video with the source being what you are previewing, in terms of "animation" rather than in terms of the quality seen on screen. I often like to make humorous effects by dragging the time indicator back and forth, and have to resort to recording my own screen while in semi-fullscreen mode, then import that video and crop out the chrome. This obviously is not optimal and results in significant quality loss. Does Pr itself have such a feature built in?
    I doubt it does, but it would be extremely useful.

    Ditto what mark said. The intended purpose of the project manager is basically to do just as you said. It was a great solution for anyone that wanted to store the few usable minutes of their media and were confident in just discarding the rest. The problem is that, as Mark said, it doesn't handle the trimming of all common file types these days. That's because, in video, 'destructive' editing is always a matter of re-exporting edited versions and project manage simply cannot export every format to any format. The original files are never actually being trimmed down, you're just getting new versions to replace the old ones with. This represents another drawback in the form of generational loss. That's why the Project Trimmer many not be the ideal solution for you even if it is able to trim all applicable formats for you.
    I tend to agree with Jim and thing that the better way to go is with Prelude. With that app, you can log what you want before hand and then capture (or, more accurately, 'Ingest') just those parts from the start. Still, it might be a good idea to save the original footage on memory card(s), hard drive(s)s (or , dare I say, tape(s_?). That way if you find out later that you didn't capture (or ingest) all of what you wanted, you can always go back and get it. Also you'll have an additional backup which could easily be re-captured from the original source if you've save the prelude project(s).

  • Improvements concerning Warp Stabilization Premiere pro CC?

    Are there Premiere Pro CC Warp Stabilization improvements regarding  speed (faster stabilization) and file size (project)?
    Thanks for the appreciated feedback
    Rene

    Thanks Steve...for what it's worth, I'd still like to say that a more effective "method" (in the warp stabilizer settings panel) to have set as DEFAULT would be "Position, Scale, Rotation" instead of "Subspace Warp".  The latter may sound cooler, but 9 out of 10 times the former method does a better job at BOTH creating less wobble and cropping the video either the same or less than subspace warp. I stabilize 100-200 shots per project/per week so I know this feature inside and out. I'm excited for the new VFX and thank you for helping with the project bloating, but I still believe making "Position, Scale, Rotation" the default method would be wise. Just a thought.  

  • Farsi Titles in Premiere Pro CS6

    I've seen a few posts that seem to be relevant but offer no conclusion about how to create Farsi subtitles in premiere pro CS6. I've seen many posts about persian font being reversed in adobe software, so that might be my next problem.
    Adobe phone support offers no suggestions.
    Any help would be appreciated.
    Thank you.

    Thanks but no cigar, Joe Bloe. Shortly after post #9 is post #14 in which they conclude that it's not possible to work with arabic subtitles in premiere pro. Adobe tech support was also not able to point them in the right direction.
    Here's the conclusion of that thread :
    14.Kusumas,Feb 28, 2013 9:01 AM   in reply to Alan Craven 
    Thanks Alan, Sorry I took a while to repsond - I've just spent 1 hour 18 minutes on the phone with Adobe (their bill).Turns out that what I am asking for is altogether impossible in CS5 (Premiere, PhotoShop Indesign etc.). It is also not possible in PPro CS6 but is possible in Photoshop CS6. So they suggested I spend just short of $1,000 upgrading my Master Collection CS5 to CS6! Other than that, they had no solution for me. On another forum someone suggested importing a .pdf to Photoshop and importing crops of that image into PPro. It works but my word it's laborious! Your suggestion might well work (you are a genius so it's likely) but I do not read Arabic and would not recognise a non-proportional Arabic font if it turned up in my Aphabetti Spaghetti! So, thanks for your input - I'm now a day behind schedule so I'm going to go the PDF / Photoshop route. Wish me luck.
    15.Alan Craven,   Feb 28, 2013 9:53 AM   in reply to Kusumas 
    Sorry I can't help any further, but my exposure to Arabic is zero too - just a flight from the UK to New Zealand and back via Dubai on Emirates.  I had about enough exposure to the safety video in Arabic to recognise some of the spiel in Arabic by the end of the reurn flight!
    My dodge with highlighting just the widely spaced characters and turning down (i.e. making nearer to zero), the kerning for those characters alone works for I's etc in English, but I haven't tried it with Arabic.
    Good luck, and I hope your patience holds out.

  • Adobe Premiere Pro CS6 Freezing

    I am experiencing freezing issues when trying to edit within premiere pro. Simple tasks like cropping videos, color correcting or anything done to the video will freeze the program window and then eventually freeze the program.
    System Specs:
    Model Identifier:          iMac12,1
      Processor Name:          Intel Core i7
      Processor Speed:          2.8 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      Memory:          12 GB
    Using Premiere Pro CS6 6.0.2
    Any help appreciated!

    What are you editing, and does your sequence match your video?
    Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For Mac http://mediainspector.massanti.com/

  • How to create Chinese Close Captioning in Premiere Pro CC?

    I am using an English version Premier Pro CC, the Chinese character will not display on screen when created in the caption window. Do I need a Chinese version of Premiere Pro for creating Chinese close captioning?

    Hello,
    Have you read through this article yet? Adobe Premiere Pro Help | Importing still images
    Seems like the section at the end of the article could be helpful
    Resizing imported images
    Imported images usually have a higher resolution than imported videos, so they appear cropped when viewed on the Timeline in Premiere Pro.
    You can individually adjust the scale of the clips to match the sequence frame size. Or you can use the Set to Frame Size command to quickly resize the image.
    When you use the Set To Frame Size command, the native pixel resolution of the image is preserved, letting you see the sharpest resolution when you zoom in on an image.
    Right-click (Windows) or Control-click (Mac OS) an image in a Timeline.
    You can select multiple images in the Timeline at once by pressing Shift and clicking the images.
    Select Set To Frame Size.
    When you select the Set To Frame Size command, the Scale To Frame Size setting is toggled off for improved playback performance.
    Please let us know if this does the trick or if you need further help.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

Maybe you are looking for