Getting No rights error in Crystal Reports connection with SAP ECC 6

I am ABAP/BI developer and would like to work in Crystal Reports 2011. Currently, We have SAP ECC 6 and BI 7 set up. I have installed trial version of Crystal Reports 2011.
I am getting error while trying to create blank report in Crystal Reports:
Create New Connection -> SAP Tables.. -> entered SAP Development server user id and password -> following error message :
LOGON failed
Details : You do not have necessary rights to design reports against the SAP system. Please check with your system administrator.
My user id has all rights in development server. So, is any special rights require? OR do we have to install any patch for Crystal Reports at SAP level?
Please guide me.

Hi,
To be able to report off an SAP data source in Crystal Reports, request the SAP Administrator to set the appropriate authorizations for the user.
For a list of authorizations that are necessary for each type of SAP connection, consult the document:
BusinessObjects XI Integration for SAP Installation Guide
In the "Authorizations" chapter, there is a description of each authorizations needed for each type of connection and actions.
( The document is attached to this SAP Knowledge Base Article in the attachment section )
In addition to the authorizations specified in the SAP Integration Kit Installation Guide, the following authorizations are required:
For Authorization object: S_RFC with Field name: RFC_Name. According to the installation guide the values should be: SYST, /CRYSTAL/OPENSQL
Additionally you will need the value: SUSR as well.
For Authorization object: ZSEGREPORT with field name: ACTVT. According to the installation guide the value is: 02 (Change)
Additionally you will need the value: 01 (Create or generate) as well.
Thank you.

Similar Messages

Error in crystal report Connection

Hi
I created a crystal report in SAP B1, its showing connectivity error when I was viewing the report in SAP B1 .(I'm useing SAP 2007B)
As u2018* failed to open the connection u2019*
Plz do need fully
Regards
Aravind M

Hi,
Have you checked these?
Crystal Integration to SAP
CR AddOn for SAP Business One - ODBC vs OLE DB connection
Thanks,
Gordon

Getting Communication failure error in crystal reports

Hi All,
We are using Crystal reports for our business as a report tool. We are getting Communication error failure message. Please help us to resolve this issue. We are using Multihomed server.
If we can resolve this problem by coming Monday morning EST it will be great help for us.
Contact numbers are Surya : (1) 609-439-6786 (mob) and (1) 408-689-7221 (home)
Venkat: (91) 9444704889 (mob)
Waiting for your call.
With Regards,
Venkat.

Hi,
The error messages occur because there are multiple network cards or name resolution issues on the server.
To resolve the error, specify an available port for an IP address
1. Open the Crystal Configuration Manager (CCM).
2. Stop the CMS.
3. Define an available port number on the command line of the CMS for the IP address (for example, - Port <IP Address>:<port number>). Verify that the port number is not in use.
4. Start the CMS.
Now Logging on to the CMS from the applications will now occur successfully.

SAP Crystal Reports connection to SAP R/3

Hello Everybody,
I install SAP BO Enterprise Edition XI 3.1
SBOP Rich Client Tools XI 3.1
SBOP Integration Tool Kit XI 3.1
Java Connector
Crystal Reports 2011
I configured all the integration and it works fine, i can log on the Infoview with SAP ID.
I work with SAP R/3 4.6C
The problem is when i connect to the R/3, Crystal show me the system that i have in the saplogon.ini, and then i used a user that i have to test, whenn i tried to logon, an error occurs...
Logon failed.
Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
And when i used the user sap*
Logon failed.
Details: Name or password is incorrect. Please re-enter.
So... what do i need to pass that rights to my user??? or do i need to do some kind of customizing in the SAP R/3 system???
Thanks!
Edited by: Erick Fernando Nicolas Fernandez on Aug 10, 2011 3:55 AM

There is a specific set of authorizations that you need to provide to your SAP user to be able to create CR reports against SAP data source. Check in the "SAP BusinessObjects Enterprise Integration for SAP Solutions Installation and Administration Guide" chapter 13 called "Authorization".
You can download this guide in the following URL: ht[http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf|http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf]
More product guides on ht[http://help.sap.com/businessobject/product_guides/|http://help.sap.com/businessobject/product_guides/]
Hopefully it helps.
Filipe Hartmann

Unknown Database Connector Error using Crystal Report XI with Windows 7

My current configuration is:
Windows XP Professional
Crystal Reports XI Professional
Oracle Client 10g
This is working great, however we are switching to Windows 7 Professional and I need to get this same configuration working on the new machines.
I have loaded Windows 7 Professional and Oracle Client 10g. Oracle makes the data connection without any problems. I loaded Crystal Reports XI Professional, but it will not connect to the Oracle database. It keeps giving me the Unknown Database Connector error. Can anyone assist me with this problem? This is the final software package that is holding up the project.
Thanks

Hello Uher,
Thanks for quickly response.
I have attached the details of my issue, the most confuse part is that I'm not sure is there any conflict btw software.
Appreciating your professional advise.

Crystal Report Connectivity with Java

How to connect our program with crystal report?

I have never used crystal report. I have created a stand-alone application in java 6 with SQL server 2000 as backend. Its a simple application that maintains records of employees in an organization. I want to use crystal report for report generation. I have crystal report 9 on my system. I have searched a lot on google but could not find any relevant help. Can u provide help in this regard or send me links from where i could get any lead.
I am not using any IDE as such now. Is it actually needed?
Any help in this regard would be highly appreciated.

Crystal report- Connect from SAP gateway to RFC server failed

Hi All,
I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
Error :
Logon failed.
Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
Location SAP-gateway on host ply.log.com/sapgw30
Error timeout during allocate
TIME ....
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1996
Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
Can you please help us solving this error.
Thanks
Chetan

Hi Stratos,
The SAP Version is ECC 6.0.
The below transports have been imported.
u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
Thanks & Regards,
Chetan

Issue with Crystal Report integration with SAP Portal

Hi,
Crystal Report using Crystal Reports 2008 trail version is created.This .rpt file is present on my desktop and I would like this report to be published on SAP Portal.Can anyone please let me know steps to do so?
Regards,
Madhu.

You need to install SAP integration kit. There are some configurations you need to do.Please go through the below URLs for more details:
[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End]
[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End]
Publishing:
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End?blog=/pub/wlg/11144]
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End?blog=/pub/wlg/11146]
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End?blog=/pub/wlg/11147]
Hope this helps!!!

-222 Error When Trying to Connect with SAP[PL 40]

Dear All,
I am having one problem when i am trying to connect to SAP with PL 40. My ADD-On was working fine for PL05.
Today I have upgraded my PL version ( PL 05 to PL40). After wards i am unable to connect to SAP.
Any sugessions, clue or solutions would be highly appreciated..
Waiting for a quick response.....
I am really stuck ... can't go ahed without this.....
Regards
Sanjay

Hi
-222 -> usually this is a period problem.
you have to create a new period, and set it as default.
(General Settings form -> don't forget to set it as the current one)
after this it should work. had a similar problem yesterday.
lg David

Jndi error in crystal report connecting to jsp

hi
getting error while connecting my report to jsp
Error is JNDI error means i m unable to connect to oracle server using my jsp
if any one have answer than provide me
thanks& regards
ramesh

Rethink your design. Unless this is a trivial application, a JSP should not be initiating database connections (or really performing any JNDI lookups at all). JSP's are part of the view. In model-view-controller architectures, which normal web applications attempt to implement, it is the model's responsibility to connect to a database to fetch relevant data. In its simplest form, this means you at least write a helper class to perform the JNDI DataSource lookup and return the data via a public method. Ideally, you have enough of these classes that they are not simply helper classes, but rather a full-fledged model tier. See tutorials here and on the net about MVC architecture.
As to your specific issue, it could be any number of issues. Are your deployment descriptors (web.xml, serverl.xml, weblogic.xml, etc.) set-up correctly? Is there a typo between the names declared? What does your JNDI lookup URI contain? Is there an error there? What is the code you are using to perform the lookup? What does the actual exception stack trace contain? We will need some or all of the above information to actually diagnose the source of the error.
However, first, redesign your JSP. :^)
- Saish

Errors when trying to connect with SAP Netweaver BW Connection

Hi,
I'm trying to pull in data from a Bex query using the BW Connection.
I'm on SP4.
When I add the connection from Data Manager, I can logon to BW, however when I browse for queries I get .COM exceptions and Class not Registered errors.
Any ideas what could be causing this?
Thanks,
Angela.

Hi,
To design dashboards using BICS connection these are the prerequisits :
on the client side : Xcelsius Enterprise Designer 2008 SP2 or above (trial or engage versions do not offer this connectivity),
SAP GUI patch 901 or above
on the server side : NW 7.0 EhP1 SP5 with ABAP and Java stacks.
To view dashboard (run time) :
on the client side : a web browser, Adobe Flash Player
on the server side : NW 7.0 EhP1 SP5 with ABAP and Java stacks
Important Note: The BI Java stack and Single Sign On between ABAP and Java are a must have to get this connection working.
@Sri

SAP Crystal Report 2013 SP03 - Connection error with SAP ECC tables, clusters

Hi,
I'm trying to connect SAP Crystal Report 2013 with SAP ECC but I'm getting below error. I've read some where that We need to install SAP integration kit but SAP BI 4.1 it comes default, also had to install the ABAP cystal report transport - How to do Install this on SAP side -
and on the ECC side we had to develop Crystal Authorization - how to develop this?
Can someone screenshot of these steps and please suggest if something else can be done.

Hi Pawan,
Search for the error and you should see many threads for this issue.
Anyway, this is what I found:
logon failed. you do not have the necessary rights to design reports
Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
The wiki should have answers to all your questions regarding Transports, Authorization et al.
-Abhilash

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

Crystal Reports 2008 with BO Enterprise XI 3.1

Hi All,
We are in the process of implementing CR2008 with BO Enterprise XI 3.1.
We have completed the installation successfully. We can connect from CR2008 client desktop directly to BI-7 using the BO SAP Connector. But We have the following issues,
1) On CMC (OB Ent Server) we don't see any business object related roles in the list of values under the authorization. We see 3 J2EE related roles only. We did everything according to the documentation. Changed JCO (sapjco.jar) along with the DLLs to various versions and even changed the 64bit to 32bit but no luck. Classpath is also set in Tomcat but still we don't see any of the BO related roles.
2) We have created a connection to universe using Designer (BO Ent). But when we try to connect from CR2008 to universe though the Business Object Enterprise Server using the client desktops, we can only select the fields for the query. But when we try to confirm the query we get a message saying NOT LOGGED ON.
Are we doing the right thing ? We have BI-7 installed on Windows 2003 (64 Bit Server) and BO Enterprise Server XI 3.1 and SAP Connector XI 3.1 Server was also installed on the same server. We have client desktops with Crystal Report 2008 with SAP Connector Client installed.
What are we missing ?
Appreciate if you could kindly help us to get this problem solved as this is dragging for a while now.
Thanks a lot in advance.
Thanks and Regards
Kushan

Hi,
take a look here:
BusinessObjects and SAP - Overview
/people/ingo.hilgefort/blog/2008/02/07/businessobjects-and-sap-part-i
Crystal Reports and BI Queries
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Crystal Reports and BI Hierarchies
/people/ingo.hilgefort/blog/2008/02/27/businessobjects-and-sap-part-3
Crystal Reports and SAP R/3
/people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
Technical Material
/people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
Ingo

Failed to retrieve data from the database crystal reports 2008 in SAP B1

Hello friends,
I am using Crystal report 2008 with SAP B1 PL 8.8. When I run any report, it runs correctly from Crystal Report. But whenever I try to open the same report through SAP ( Tools -> Preview External Crystal Report ), it prompts the parameters for that report and then open up the crystal report window and throws an Error message ("failed to retrieve data from the database. Details [Database Vendor Code: 156]").
Please any one suggest me the corrective solution.
Thanks in Advance,
Keyur Raval.

I had the same problem in SAP B1 2007. Report worked fine except when it was open from B1. Generally there may be different problems. In my case the same problem was caused by using some procedure which was in a specific schema. Changing the schema into "dbo" solved the problem.
Radoslaw Blaniarz

Getting No rights error in Crystal Reports connection with SAP ECC 6

Similar Messages

Maybe you are looking for