Crystal report default values not showing in BOE
Hi,
In Crystal Designer 2008, we can set parameters to have a default value. When we refresh the report in Designer, the default value is the one that's automatically selected. However, once we upload it to BOE, the default value is blank and we must manually re-create them in the Default Value Properties. Anyone knows why it is like that?
Hello,
Make sure you mark the items you want on Defaults inside CAC1 t-code.
You have the following options and from where are they taken of:
- Controlling area -> from IT0001
- Activity type -> from IT0315
- Purchase order -> from IT0315
- Attendance/Absence type -> directly entered in CAC1
- Master cost center -> from IT0000
- Sender business process -> from IT0315
- Service master -> from IT0315
- Cost center -> from IT0315
- Wage type -> directly entered in CAC1
Regards,
Bentow.
Similar Messages
-
Ssrs parameter default value not showing ,when available values is binded to query dataset
I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
ChandraHi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Static Parameters - Default Values Not Showing On Crystal Server
First, I create a basic report with static parameters. Then I assign default values to the parameters. When I run the report in the Crystal Developer, a window pops up and I see my parameters with the default values assigned. At this point, if I run the report, it runs as expected and uses the default parameter values.
However... if I install this same report on the Crystal Server, select 'Properties' > 'Default Settings' > 'Parameters', I see my parameters but I don't see their default values, yet if I select 'View', then a window pops up and I see my parameters and their default values.
I guess I have the following questions:
1. What's the difference between 'Viewing' and 'Running' a report on the Crystal Server?
2. Why don't I see the parameter default values when I select 'Properties' > 'Default Settings' > 'Parameters' in the Crystal Server?
I see the same behavior whether I use CR Developer XI or 2008. The reports are being run on Crystal Server 2008.Hi,
There are two modes of saving a report. 1 save your report with data (to do this go in File-- Save Report with Data check this option) 2. Save your report without data (uncheck the above said option)
I think you are saving your report without saving the data with your report. Try to save the report with saved data this will keep your parameter default values.
Viewing is just looking at your report data which was saved along with your report. 'Running' is nothing but you are refreshing your report which will give you current data.
Thanks,
Sastry -
Crystal Report Lines / Boxes not show in Excel
In Crystal Report 2008, I created a report with lines and boxes inserted. I then imported into SAP B1 8.8. The report looks fine in crystal report viewer with all the correct formatting. I exported the report as Ms Excel (with formatting).
After exported to Excel, the report looks fine for the most part but all the lines and boxes are not showing at all. I went back to CR designer and tried to mofify the format of the lines / boxes but they still not showing in Excel. is there any way to fix the display of those boxes and lines?Hi,
Format like lines/Boxes cannot be exported. If you want the exact layout, print to PDF file may be your only option.
Thanks,
Gordon -
Crystal Reports Field Explorer not showing
Hi,
I am using Visual Studio 2003 with the bundled version of Crystal Reports. It has always worked fine until recently the Field Explorer tool bar does not show up anymore when I open a Crystal Report for development. I have uninstalled the entire Visual Studio and reinstalled the Visual Studio but it still will not show the Crystal Reports Field Explorer. However, if I install the Visual Studio on a completely different computer it works fine. Anyone have any idea what could be causing this problem on my main computer? Could it be a setting somewhere in the Visual Studio? I cannot find any information on this problem.
Thanks,
RazzleOk, I figured out what the problem was. It was something wrong in my Windows profile. So I deleted my Windows profile and created a new one and it is working now.
Razzle -
Crystal report viewer do not show on client computer installation
hi
hope all you are fine
i develop a simple project that show "Hello word My First Crystal Report" on crystal report viewer. after this i add new project "setup and deployment". In Setup Project I add 4 files of .msm for show crystal report.
1. CRRuntime_13_0_tr.msm 2. Microsoft_VC100_ATL_x86.msm
3. Microsoft_VC100_CRT_x86.msm
4. Microsoft_VC100_MFC_x86.msm 5. Microsoft_VC100_OpenMP_x86.msm
when i install on developer computer. it runs successfully. when i install on client computer, software runs fine but crystal report did not show and having error "METHOD NOT FOUND VOID CrystalDecision.WINDOWS.FORMS.CrystalREPORTViewer.SET_CACHEDPAGENUMBERPERDOC(INT32)"
i install .net frame work and CRforVS_13_0_9.exe on client computer but .net frame work show form but crystal report did not show.
Please HelpHello,
For Crystal repot related question ,please consult on SAP Crystal report forum instead of here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Default values not showing up in CAT2
Hi Guys,
Using tcode CAC1 I have configure to show the default values of Cost Center and Activity type from IT0315. But for some reason I cannot see the default values in CAT2 for any of the PERNR.
Please let me know what else I am missing.
Thanks a lot.
miniHello,
Make sure you mark the items you want on Defaults inside CAC1 t-code.
You have the following options and from where are they taken of:
- Controlling area -> from IT0001
- Activity type -> from IT0315
- Purchase order -> from IT0315
- Attendance/Absence type -> directly entered in CAC1
- Master cost center -> from IT0000
- Sender business process -> from IT0315
- Service master -> from IT0315
- Cost center -> from IT0315
- Wage type -> directly entered in CAC1
Regards,
Bentow. -
Crystal reports 11: Values displayed in crystal report not showing in VB6
Hi!
I updated an existing lower version of crystal report 7 to crystal report 11. Changes are the following:
1. sql query in VB6 to add fields
2. sql query in crystal report to manipulate values and not use formula. crx11 doesn't allow summary/total in formula fields.
3. report orientation
4. additional fields to view
5. font sizes, length, can grow properties, etc.
When I tested it directly in crx 11, all fields/values are displaying correctly. When I integrated it in VB 6 using Crystal ActiveX Report Viewer Library 11.0 and CR Viewer object, the field is blank.
I've tried several checking like field suppressions, conditional suppressions, etc.
By the way, I also have a report using a subrepot with conditional suppressions. Same thing is happening. The subreport data only displays the alloted space but does not show values in VB6.
Thank you in advance for your help.
Edited by: Naga01 on Jun 28, 2011 8:46 AMThanks for your response.
Before I read your response, I tried tweaking my reports and was able to resolve the issue.
Steps taken to solve the issue are the following:
a. Value not showing one field of four (4) reports.
Solution: I created new ones and integrate it in VB 6. The values are now showing. Tweaked on the line object properties, got a problem with the extended line but solved it by adjusting the height of the detail section.
b. Value not showing in sub-report.
Solution: My report used a shared variable so I can pass the condition to my sub-report. I used the new reports and just pass a query during runtime. The values in the subreport is still not showing. I added a formula and called the value in it. Values in the subreport is now showing.
I'll try to update the crystal reports version as suggested at a later time. -
Hi Experts, Crystal report mutiple value selection using checkbox in 8.81
Hi,
I am using Crystal report multiple value selection option using checkbox in 8.81 sap b1 pl 05.but i want default all check box value should be selected.
How do we achieve same.
Thanks
Rajkumar Gupta
Edited by: Rajkumar Gupta on Jul 11, 2011 5:45 AMDear Raj,
As per me, this can't be done in current version of SAP 8.81.
Alternate way is use SDK
Thanks
Kevin -
The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Crystal reports 2008 will not allow multiple exports in a row
I recently had service pack 3 and fix pack 3.3 updated to my system ( crystal 2008) to help correct a issue with mapi not populating addresses from outlook when trying to export a report. I have a new issue. - sort of???
Now when I try to export multiple reports in a row I still have the same issue. I can send 1 report out. But if i try to send another report out i have the same issue that I had with mapi not populating the addresses field from outlook.
To get past this I shut down crystal and then bring it back up and I can send (ONE) report again before the same thing happens. Does anyone know if there is fix for this issue?Im not sure I agree with you designation that this report should be in the report DESIGN forum. I
My problem has nothing to do with report design in my OP. The MAPI function (in crystal reports itself) will not populate addresses once I export 1 report. When I try to export a second report that is when it quits works. This is basically the same problem that a hot fix or fix pack corrected but now instead of now working at all. I can only export 1 report before the same mapi issue happens???? -
The "next" button of crystal report viewer does not work
hi
I use crystal report viewer control to show my crystal report on my aspx page.
like:
<CR:CrystalReportViewer id="CRViewer" runat="server" HasRefreshButton="False" PrintMode="ActiveX" DisplayGroupTree="False"
AutoDataBind="True"
SeparatePages="TRUE"
Height="520px"
Width="900px">
</CR:CrystalReportViewer>
however when I try to navigate to next page by click "Next" arrow button on the crystal report viewer toolbar, it only can navigate to the page 2, whatever I click the "Next" button, it still stay on page 2,
actually this report has 10 pages.
On the other hand, if I input the page number, such as 5 on the "goto" textbox, it will jump to page 5 correctly.
Could you give me any good advices to solve this problem?
Thanks.There are a few threads discussing the issue in this forum. See if these provide some guidance:
"Next Page" wont go beyond page 2 in Html Viewer (Crystal.NET for VS 2008)
Re: Crystal Reports .NET Visual Studio 2005
Problem in CrystalReportViewer
Ludek -
SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice
Hello Every Body
I hope to get answer as soon as possible
I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
Note:-
( All parameters Available Value set to Get Values From a Query)Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
work?
all other reporting in SWM which doesn't ask for month and year working
only the problem in year & Month Parameters Values
note:-
these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation -
Camera Raw Defaults & Presets not showing menus (BRIDGE)
Hi There
I just upgraded to a new version of PS CS3 & Bridge and the option to apply Presets, or to Apply Camera Raw Defaults is not showing when I right click a file in Bridge. It also doesnt show up in the menu. I need to be able to Batch process hundreds of photos at a time and then convert them to Tif formats. I used to be able to do this by applying my Adobe Camera Defaults to many images at once. How do I do this now????
I am running Bridge 2.0.0975 and PS 10. Help!! This is critical for me!!!
thanks so much!> Even if old versions are available for download, having older versions available on disk in case of malfunction is a perfectly acceptable practice.
> This applies to any update of any software.
Agreed. I have gigabytes of disk space packed full of iso's, dmgs, and zips for
(almost) all of the software I've installed on my computers. It's a pain to
manage sometimes, but I know I can go back and reinstall PS7 (for instance) if I
need to even though I have no clue where the CD is at. It's just one part of my
configuration management and backup strategy. I don't have a sysadmin to take
care of this kind of thing for me any more, unfortunately, so I have to do it
myself.
This plan also has the advantage that I don't have to be online to download
older versions from a vendors site (if it's even available) or go searching for
a seeded torrent (if it's not).
I'm not saying this approach is good for every one or even good for anyone but
me, but it is a perfectly valid way of doing things.
-X -
Crystal Reports For Eclipse - Multi-values not showing on page..
Tried two different ways to set params, but to no avail. Values seems to be set, but only one value appears on the report.The value is updated, so not an old value or anything.
Also if I look at the values I can see the values are set! The Field is set to multi=true and the height is big enough to display lots of date grow=true.
<%@page import="com.businessobjects.samples.JRCHelperSample" %>
<%@page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer" %>
<%@page import="com.crystaldecisions.reports.sdk.ReportClientDocument" %>
<%@page import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions" %>
<%@page import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase" %>
<%@page import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource" %>
<%@page import="com.crystaldecisions.sdk.occa.report.data.Fields" %>
<%@page import="com.crystaldecisions.sdk.occa.report.data.ParameterField" %>
<%@page import="com.crystaldecisions.sdk.occa.report.data.ParameterFieldDiscreteValue" %>
<%@page import="com.crystaldecisions.sdk.occa.report.data.Values" %>
<%@page import="com.crystaldecisions.reports.sdk.*" %>
<%@page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@page import="com.crystaldecisions.sdk.occa.report.data.*" %>
<%
// This sample code calls methods from the JRCHelperSample class, which
// contains examples of how to use the BusinessObjects APIs. You are free to
// modify and distribute the source code contained in the JRCHelperSample class.
try {
String reportName = "Report1.rpt";
ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
if (clientDoc == null) {
// Report can be opened from the relative location specified in the CRConfig.xml, or the report location
// tag can be removed to open the reports as Java resources or using an absolute path
// (absolute path not recommended for Web applications).
clientDoc = new ReportClientDocument();
// Open report
clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
// ****** BEGIN LOGON DATASOURCE SNIPPET ****************
// Database username and password
String connectString = "jdbc:oracle:thin:@localhost:1521:XE";
String driverName = "oracle.jdbc.OracleDriver";
String JNDIName = "";
String userName = "darren";
String password = "darren";
// logon to database
//JRCHelperSample.logonDataSource(clientDoc, userName, password);
// Switch all tables on the main report and sub reports
JRCHelperSample.changeDataSource(clientDoc, userName, password, connectString, driverName, JNDIName);
// ****** END LOGON DATASOURCE SNIPPET ****************
// Store the report document in session
session.setAttribute(reportName, clientDoc);
// Create the CrystalReportViewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// set the reportsource property of the viewer
IReportSource reportSource = clientDoc.getReportSource();
viewer.setReportSource(reportSource);
// set viewer attributes
viewer.setOwnPage(true);
viewer.setOwnForm(true);
// MyParameter
String paramName = "MyParameter";
String theValue1 = "Hello";
String theValue2 = " World!";
// Method 2
//We will be using the ParameterFieldController quite a bit through-out the rest of this function.
ParameterFieldController paramFieldController = clientDoc.getDataDefController().getParameterFieldController();
// MULTI-VALUE DISCRETE PARAMETERS.
Object[] multiVals = {theValue1, theValue2};
// sReportName - the report that contains the specified parameter field.
// sFieldName - the parameter field name.
// newValue - the collection of values to be stored in the parameter field.
paramFieldController.setCurrentValues("", paramName, multiVals);
// Method 1
Values values = new Values();
values.add(theValue1);
values.add(theValue2);
ParameterField paramField = new ParameterField();
paramField.setName(paramName);
paramField.setAllowMultiValue(true);
paramField.setAllowCustomCurrentValues(true);
paramField.setCurrentValues(values);
Fields parameterFields = new Fields();
parameterFields.add(paramField);
viewer.setParameterFields(parameterFields);
viewer.setEnableParameterPrompt(true);
// Show parameter values to console
Fields fields = viewer.getParameterFields();
for (int i = 0; i < fields.size(); i++) {
ParameterField pf = (ParameterField)fields.get(i);
Values v = pf.getCurrentValues();
if (v.isEmpty()) {
System.out.println(pf.getName());
} else {
System.out.println("v.size(): " + v.size());
for (int j = 0; j < v.size(); j++) {
ParameterFieldDiscreteValue pfdv = (ParameterFieldDiscreteValue)v.get(j);
System.out.println(pf.getName() + " - " + pfdv.getValue());
// Apply the viewer preference attributes
viewer.refresh();
// Process the report
viewer.processHttpRequest(request, response, application, null);
Thanks in advance!This is not a support site but a community forum. For direct help purchase a case on line
Maybe you are looking for
-
How can I import several small audio files to create one BIG file in iTunes
I have ONE cd with THREE audio stories contained in EIGHTEEN audio files (6 files make each story). I also have an iMac. Not sure if they're mp3 or not, but they play on computers and car radios. How can I take this CD, whisper abracadabra and end up
-
ITunes 6.0.3.5 and Quicktime ~Problems~
My Quicktime won't open, even afetr i downloaded the new version which Katrina sed in one of her answers that she answered for someone. Also itunes won't open it loads but then doesn't do anything, I don't get an error or anything but it jsut won't o
-
I want to buy a new MBP (15", 2.2 GHz model) for University. I wish to put an SSD in it, for performance and durability. After some reading online, I found that Intel's SSDs generally have higher reliability (at least, in the tests I saw) than Toshi
-
Automate turn airport on or off to save battery
i read a method in a book [are you allowed to mention names of specific books?] to toggle airport on and off by inventing a shortcut for it. i think it was something like system preferences>keyboard and mouse>keyboard shortcuts>+. the book said type
-
REM - Cost Collector Settlement and transfer order price
Hi, My client is using REM. They create planned orders in their distribution centre and through special procurement manufacture the orders in a seperate manufacturing site. There is no stock transport orders the goods are manufactured in the producti