CS call drop with Wi-Fi option enabled

My Friend bought Iphone 6 from U.S and using the same in Inida ( Indian SIM ) and facing a unique issue where First MO CS call is getting failed when Wi-Fi option enabled on device. As soon as we Disable Wi-Fi on Device , No such behavior  and CS calls works perfectly fine .
As per oerator analysis , such failed calls are not even hitting there network . 
Need Apple expert support to identify exact reason for these CS call failures .Why device is behaving in such manner.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Similar Messages

  • DAC - Can I run more then one Exection Plans with full load option enabled?

    Hello All,
    I have configured for subject Area sales – Orders, Backlog and Invoices (OBIEE)
    Now I want to run DAC to load the underline tables for subject Areas Financials – Revenue Analysis and Financials – GL Budget and Expenses, I have identified the relevant fact tables and built a Execution Plan in DAC.
    DAC - In which mode should I run the execution plan?
    With full load option enabled or disabled because already full load run is done for sales – Orders, Backlog and Invoices and this run should not disturb the existing data
    If I run with full load option enabled do it overrides the existing data for other subject area
    Please help me I am bit confused!
    Regards,
    SMA
    Edited by: SMA on Aug 18, 2009 3:36 PM

    No need of combining all the subject areas into one execution plan. Simply run the second ETL without checking the full load option. It will do the full load for the tables related to the newly added subject areas and incremental for the common tables between old and new subject areas.

  • Calls dropping with disconnect cause 16 (normal clearing)

    I am faicing a strange problem within my voice network.
    I am using both VoIP and SS7. For VoIP I am using IPIPGW and for SS7 PGW.
    Some calls connect normally but immdeiately drop with disconnect cause 16, or ISDN cause 8090 (which mean normal clearing) .
    I have difficulty on tracing the cause as I don't know where to start from.
    Can someone indicate any poosible cause for this problem or where to start looking at.

    First specify where is the clearing message come from ? where do you see it
    also intitate a debug for isdn q.931 messages to get deep into the cause...

  • Iphone4 4.3.3 update - calls drop with static

    Ever since I updated to the 4.3.3 iphone update on my iphone 4, I keep having calls that have to be dropped when major static appears on the other persons line from my phone. I thought maybe it was them, but it has happened to every person I have called! It started exactly after I completed the 4.3.3 update on May 8, 2011 and keeps happening since.

    I have taken a leap of faith and pressed 'restore to factory settings'.. Yes, it has now given me the option to restore from the last back up (fortunately immediately before attemting the iOS update !!). This is now in progress with 27 mins to go !!
    The point of this message is to try to give some confidence to others in the same situation - I had not been in this situation before.
    Fingers crossed to be able to find out just how much of the earlier (pre-update attempt) I get back.
    Promise to let you know.
    Rob

  • Unable to make conference call + calls dropping with iPhone 6? :(

    I have an iPhone 6 and i keep experiencing my phone calls randomly dropping out on me. I would sometimes hear a beeping noise and then a 'call failed' message would appear on the screen. Other times the call would just cut off and the screen would go back to the caller information or the home screen. Second problem is that i cannot create a conference call.  Please help! 

    Hi ,
    To make the conference call, click here for information.
    The dropped calls, is this the one area?
    Do you have any problems with texts?
    Thanks.

  • Calls dropping with new OS

    I have a 4s, and updated to the new OS a couple of days ago. Ever since then it has been constantly dropping calls. Any suggestions before I head for the Apple store? And what will they tell me?

    Hello Ron,
    Thank you for using Apple Support Communities!
    I would recommend the troubleshooting from this Troubleshooting Assistant:
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Cheers,
    Sterling

  • How many implmentation allowed of BAdi with multiple use option???

    Dear all ,
                        I have doubt in BAdi implementation -
    Case 1 -  I have create a z badi with multiple use option enabled . than i create two implementation of that BAdi . when i call it from my z program than it will call only one which was created 1st  so what is use of 2nd implementation and when it will call ???
    Case 2 - Same case for tcode VD02 their is badi CUSTOMER_ADD_DATA which is also multiple option enable Badi
                  for this also i have created 2 implementation but in this case when i create 2nd implementation it asked for migration of implementation why ???
    Thanks

    Dear deepak ,
                            i have check it both implementation showing yellow color please check my z program and tell me what is wrong in this .
    REPORT  Y_BADI_EXP1.
    CLASS cl_exithandler DEFINITION LOAD.
    DATA : l_badi TYPE REF TO ZIF_EX_MYBADI,
           email TYPE AD_SMTPADR,
           email1 TYPE AD_SMTPADR..
    PARAMETERS : p_user TYPE sy-uname.
    START-OF-SELECTION.
    CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
    EXPORTING
      EXIT_NAME                     = 'ZMYBADI'
    NULL_INSTANCE_ACCEPTED        = 'X'
    CHANGING
      INSTANCE                      = l_badi               " here it will return 2 implementation  ZMYBADI_IM1 , ZMYBADI_IM2
    EXCEPTIONS
      NO_REFERENCE                  = 1
      NO_INTERFACE_REFERENCE        = 2
      NO_EXIT_INTERFACE             = 3
      CLASS_NOT_IMPLEMENT_INTERFACE = 4
      SINGLE_EXIT_MULTIPLY_ACTIVE   = 5
      CAST_ERROR                    = 6
      EXIT_NOT_EXISTING             = 7
      DATA_INCONS_IN_EXIT_MANAGEM   = 8
      OTHERS                        = 9
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD l_badi->GET_USER_EMAILID
    EXPORTING
      uname = p_user
    CHANGING
      emaill = email.
    WRITE : /5 email.       " when o/p comes it shows only 1st implementation .
    i placed break point in methods of both  implementation but as usual it stop only at first method ???

  • Call drop while talking long distance and strange number in log

    Talking to relative in NY, call dropped with no dial tone after that.  Unplugged all phones, checked the connection box.  Dial tone came back after about 15 minutes.  Checking the digital phone log revealed that {edited for privacy}was listed as being called 7 times during the time of no dial tone.  Looking at the log again showed that {edited for privacy} was called eight times yesterday.  About a call a minute to this number.  Have no idea what this number is.  It seems that everytime the calls are dropped, this is the number in the log.  What is happening? 

    The alarm system checks out OK, strange number was just the system making the regular 28 day call.  Calls are still dropping, mostly after talking for a long time.  Can call the number back immediately and get connected.  Dial tone is not missing for these latest incidents, althought it was missing once in the past.   Also have an answering machine that  clicks at random as if someone is picking up a phone.  Answering machine is set to 4 rings and digial voice answering is set to 6 rings.  The whole system worked fine when installed, now is a constant problem.  Going to start disconnecting things and probably run a wire from the box directly to one phone.  Is there a tracer that can be hooked up to monitor the line?

  • BB Drops with Call

    Hi, I wonder if someone may be able to help.
    We have an issue with our BB dropping out when the phone rings, even when there is no phone connected.
    I have done several test with the master socket, and tried different filters.  I have dialed 17070 Option 2 and done the line test   If I call up with out any filter connected and just a phone its crystal clear, and as soon as the modem is in the noise changes?  is this correct?
    I have done the adsl speed test, please see the results below.
    1. Best Effort Test:  -provides background information.
    Download Speed
    3.96 Mbps
    0 Kbps
    4 Mbps
    Max Achievable Speed
    Download speedachieved during the test was - 3.96 Mbps
    For your connection, the acceptable range of speeds is 1.2 Mbps-4 Mbps.
    IP Profile for your line is - 4 Mbps
    2. Upstream Test:  -provides background information.
    Upload Speed
    837 Kbps
    0 Kbps
    832 Kbps
    Max Achievable Speed
    Upload speed achieved during the test was - 837Kbps
    Additional Information:
    Upstream Rate IP profile on your line is - 832 Kbps
    These are our adsl status results from the router
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:18:44
    Downstream:
    4.431 Mbps
    Upstream:
    1.059 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    21.8 dB / 4.1 dB
    Line attenuation (Down/Up):
    22.4 dB / 9.4 dB
    Output power (Down/Up):
    18.3 dBm / 12.6 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    0 / 33
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 9
    Error Seconds (Local/Remote):
    65 / 49
    Thank you for your help in advance?

    Which type of master socket do you have?
    One of these
    Or one of these
    Or if you are lucky
    One of these
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Skip first screen of BD87 using call transaction with BDC_DATA option

    hello all,
    i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen?
    regards.

    Hi
    Build a BDCDATA with following code..
                                                          T     BD87                                                                               
    RBDMON00     1100     X                                                                               
    BDC_CURSOR     SX_DOCNU-LOW
                                                                BDC_OKCODE     =CRET
                                                                SX_DOCNU-LOW                                                                               
    SX_CRETI-LOW     00:00:00
                                                                SX_CRETI-HIGH     00:00:00
                                                                SX_UPDDA-LOW     05.02.2010
                                                                SX_UPDDA-HIGH     05.02.2010
                                                                SX_UPDTI-LOW     00:00:00
                                                                SX_UPDTI-HIGH     00:00:00
    RBDMON00     0100     X                                                                               
    BDC_OKCODE     =BACK
    RBDMON00     1100     X                                                                               
    BDC_OKCODE     /ECBAC
                                                                BDC_CURSOR     SX_DOCNU-LOW

  • When I receive calls I always get the option to remind me later, but only certain times I get the option to respond with text.  Is there a setting I need to update to always get this option?

    When I receive calls I always get the option to remind me later, but only certain times I get the option to respond with text.  Is there a setting I need to update to always get this option?  Also i can't use location reminders.  Is this because my calendar is in Outlook?

    The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.

  • DBUA failed with Vault option enable while didn't install Vault option

    I tired to upgrade my database from 11.1 to 11.2 with dbua, and it faied with "Database Vault option is enabled in Oracle Home "/U01/lab11g/app/oracle/product/11.2.0". This option needs to be disabled prior to upgrade.". However I am pretty sure that I didn't select Vault option while installing 11.2 Oracle software. That is really weird! Does anyone know how could it happen?
    Then I tried to disable this option will commands as below, but still got that error.
    -bash-3.00$ . .lab11gprofile_bak
    -bash-3.00$ cd $ORACLE_HOME/rdbms/lib
    -bash-3.00$ make -f ins_rdbms.mk dv_off
    /usr/ccs/bin/ar cr /U01/lab11g/app/oracle/product/11.2.0/rdbms/lib/libknlopt.a /U01/lab11g/app/oracle/product/11.2.0/rdbms/lib/kzvndv.o
    -bash-3.00$ cd $ORACLE_HOME/bin
    -bash-3.00$ relink allAny comments will be appreaciated!!
    Best wishes,
    Satine

    Hey,
    Thank you for your reply.
    The original 11.1 Oracle software and new 11.2 Oracle software are not installed Vault option actually. As below it the query result from 11.1 db.
    SQL> select comp_name,status from dba_registry;
    COMP_NAME                                STATUS
    OWB                                      VALID
    Oracle Application Express               VALID
    Oracle Enterprise Manager                VALID
    Oracle Ultra Search                      VALID
    OLAP Catalog                             VALID
    Spatial                                  VALID
    Oracle Multimedia                        VALID
    Oracle XML Database                      VALID
    Oracle Text                              VALID
    Oracle Expression Filter                 VALID
    Oracle Rules Manager                     VALID
    COMP_NAME                                STATUS
    Oracle Workspace Manager                 VALID
    Oracle Database Catalog Views            VALID
    Oracle Database Packages and Types       VALID
    JServer JAVA Virtual Machine             VALID
    Oracle XDK                               VALID
    Oracle Database Java Packages            VALID
    OLAP Analytic Workspace                  VALID
    Oracle OLAP API                          VALIDBest wishes,
    Satine

  • Problem with option: enable this distribution point for prestaged content

    Hi, for past few days I have been focused on application deployment with SCCM 2012 R2 (I am learning SCCM 2012 R2 reading books, watching video trainings . . .). Having followed allong book Mastering System Center 2012 R2 Configuration Manager I also did
    deployment of Microsoft Office 2013, Adobe Reader 11, Foxit Reader 4.2 and Notepad ++ to test collection containing one Windows 7 computer. In one of examples prestaged content file is created for Foxit Reader application. In order to do so, if I am
    right, option Enable this distribution point for prestaged content
    has to be checked on distribution point and I did that.
    Problem is that I noticed deployment of any application to test collection failed every time - system waits for prestaged content file if this option is selected. Then I have to delete deployment of given application, application itself, deselect option
    Enable this distribution point for prestaged content and create app, distribute it to DP and deploy to test collection - then everything works well.
    To make things worse, having deselect option Enable this distribution point for prestaged content (I did it yesterday and I checked that several times) this morning I checked again and this option is selected again. What might be the cause
    of this behaviour? I expected this option to be deselected - this is weird to say at least.
     

    When you enable the option "Enable this distribution
    point for prestaged content" on a DP, it causes newly created applications/packages to default to "Manually copy the content in this package to the distribution point"... This would then cause the deployments on the clients to remain
    at 'waiting for content' - unless if you manually prestage the content, as this option requires it.
    If you enable the option "Enable this distribution
    point for prestaged content" on the DP, but want to automatically have CM distribute the content, then configure the app/package to do so,
    before distributing the content: Distribution Settings tab > Prestaged distribution point settings > Automatically download content when packages are assign to distribution points.

  • Iphoto two spread page with no spread option in layout drop down

    iphoto how to create a two spread page with no spread option in layout drop down

    What version of iPhoto are you using and what system. 
    If you have an earlier version of iPhoto that doesn't not offer the Spread option then look at this page, iPhoto - two-page spread, and this topic: 2-page spread alignment in iPhoto 6.0.5...: Apple Support Communities
    OT

  • Call dropping problem with my iphone 4s

    Recently from past two weeks I have a problem with my iphone 4S of calls dropping automatically.  I tried reseting all the settings etc but no improvements till date.  I am facing huge problems since my calls are all business calls & very important ones.

    Hi
    - you cannot restore it from iTunes? as from your explanation, it looks that its iOS problem. or
    - try to let the battery drain (< 5% or until it shuts down) and connect it to iTunes and try restoring. or
    - keep it plugged in the charger for 3,4,5 hrs and do hard reset again ( lock+home bottoms)

Maybe you are looking for

  • Is unplugging TV-out adapter the only way to turn the second display off

    When the video out adaper is plugged in the iMacs resolution resets to what the TV-out can handle, I.e. 1024x768. I hate to have to plug/unplug the connecter to turn the TV-out off and thereby regain normal resolution on the iMac. Is that the only wa

  • Characteristic 0TCTUSERNM is blocked by conversion

    Dear All, I am trying to activate the infoobject 0TCTUSERNM but it is giving error as below, Characteristic 0TCTUSERNM is blocked by conversion Message no. R7476 Diagnosis The conversion of master data tables from characteristic 0TCTUSERNM is not com

  • Send file sequentially with BPM

    Dear, in my scenario that I'm developing I need to read txt files and send them to SAP ECC through Abap Proxy. I need to send file by file to SAP ECC sequentially. That is, I need to read the file "file1.txt" and send to SAP, then read the file "file

  • Newest version of premiere pro is not opening a project because "it was saved on a  newer version"

    I have been cutting on my laptop - using up to date creative cloud version of premiere pro. Laptop too slow - so rented a desktop until i finish this gig. I downloaded the latest creative cloud aps onto the desktop including latest cc premiere pro. H

  • Duplications in iPhoto

    Going through my iPhoto collection I notice that many, but not all, of the pictures have been duplicated. I have no idea how this came about. All I know is that I didn't duplicate them myself. Any ideas how many of my photos got duplicated? It's a tr