CS folder (Content or given Articles) is not updating

After Successful Installation of oracle webCenter sites, I imported the content (CS folder) of new application and also code of new application.. But when ever application is running Code part is showing new code and Content (CS) part showing old content with new content (i.e., Articles). Can I know the reason please? Could please give me solution for this issue?

The Adobe Creative Suite Cleaner Tool is used (it is Run, and not installed, per se) to remove any vestaige of a previous version, that might have been left over, with an Uninstall. Be sure to read the complete instructions.
As for running both CS 5, and CS 5.5, yes, you can have both.
Good luck,
Hunt

Similar Messages

  • Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

    Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

  • It appears that the content of news articles is not showing up when I load them. The sites where I have had the issue are Reuters, Financial Post Canada.

    When I click on the article, the body text of the article does not show up. The hyper links in the article do show up. and also on the home page for the National Post - http://www.nationalpost.com/ (error in my initial question, it is not the Financial post), the articles on the home page only show the headlines etc.

    Try deleting your hotmail account and then adding it back as an Outlook account instead of "other". It worked for me.

  • Folder content (Application, Utilities) disappear after Software Update

    Please help!
    Folder content of Application and Utilities disappeared! Applications still working through shortcuts and Dock.
    After performing another Software Update (iTunes 8.0, Security Update 2008-006 (PowerPC), Quicktime 7.5.5), a task that worked for many years on the same formated G5, the multiple errors listed in the log. Please note that I did this through Remote Desktop from a distant Mac.
    Can Disk Utility fix this? Looks like the Update did not finish well.
    Please help!

    Hi Phil, and a warm welcome to the forums!
    I think Francine's page will cure this, it just picked up the Hidden Bit, happens to Disks and/or folders...
    http://homepage.mac.com/francines/articles/invisible.html
    Or use this...
    show hidden files in OSX Finder
    Open the terminal and type or copy/paste:
    defaults write com.apple.finder AppleShowAllFiles -bool true
    Reverting to the default of NOT showing hidden files:
    defaults write com.apple.finder AppleShowAllFiles -bool false
    Restart or Force Quit Finder required to take effect.

  • Specific order not updated in MI

    Hi,
      I have a PM order for which no update (in description, operation or anything else...) that we do in R/3 PM can reach middleware. It's linked notification updates reach MI with no problem. All other orders update work just fine as well. Only this given order is not updated in MI.
    I thought that it was F.M. MAM30_001_CHANGE that would be called to update it in middleware, but it is not used. What F.M. is used to update order in middeware?
    Is there anybody that could give me a hint about my issue?
    Thanks
    Davy

    This may be due to schedule line category in the sales order ->item level.
    In t.code VA03, enter the sales order number. Then highlight line item and click on schedule lines for items button on the bottom. Find the schedule line category derived for the item under schedule line category column.
    Then go to t.code VOV6. Select the schedule line that you found in the sales order and click on details button. Under transaction flow, you will find Req/Assembly field, which may NOT be checked in your case. If this field is not checked, then the requirement will not be passed to MRP.
    If this is checked and still you dont see the details in MD04, then run report SDRQCR21 in SA38 and check again.
    Regards,

  • Bapi_salesorder_change alt UOM not updating

    Hello gurus,
    I am using BAPI_SALESORDER_CHANGE to change the sales order items data .
    In that i am passing Denominator (Divisor) for Conversion of Sales Qty and Numerator (factor) for conversion of sales quantity
    values to bapi structure fileds
    bapisditm-sales_unit = 'KG'
    'bapisditm-salqtyden','bapisditm-salqtynum'
    bapisditmx-salqtyden  = 'X',bapisditmx-salqtynum  = 'X' update flags.
    but the given values are not updating.it is updating what we define in the alternative uom values in unit of measure tab of mm01 transaction.
    kindly look into this.
    thanks in advance,
    padmaja.

    Hi
    Use the BAPI
    BAPI_TRANSACTION_COMMIT
    Regards
    Sagar

  • Balance sheet items profit center not updated

    In ECC 6- in 3KEI- we have given profit center derivation for balance sheet items through business area-
    Though derivation rule is given it is not updating profit center at the time of posting to balance sheet items
    it has worked perfectly in 4.7EE-
    How to update profit center for balance sheet items in ECC6
    Thanks in advance
    joseph

    Hi Joseph,
    Please go through the link. It is cristol clear document for your requirement.
    http://help.sap.com/bp_bblibrary/500/Documentation/J08_BPP_05_EN_KO.doc
    Regards,
    Satish Muvva.

  • Quicktime will not update in Windows

    when I try to update QuickTime, (windows7 ) I get an error code that there are insufficient privileges to access the start menu folder for QuickTime. I have tried  n as admin, changed ownership of the folder.With out this I can not update ITunes. By the way I tunes will not uninstall ether. Any help would be appreciated.

    Lets do a few things.
    1. Update QuickTime. http://www.apple.com/quicktime/download/
    2. Open up QuickTime player.
    3. Click on Edit> QuickTime Preferences>Advanced.
    4. In the center of this section there is a "Video" section select Safe Mode.
    5. Click on Ok and go ahead and close out of QuickTime.
    I have also noted that there are SEVERAL bugs with QuickTime and Nvidia Chips.
    A few things I suggest you do is to update all of your drivers, and install any pending Windows Updates.
    Please post if this worked for you.
    JMG- Not associated with Apple.

  • HT4623 My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this

    My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this

    I suspect you have the original, 1G iPod touch. Those can only go as high as iOS 3.1.3,
    If y ohave a 2G those can go as high as 4.2.1
    Identifying iPod models
    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later.
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • Been using Macs since classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents (Name, Date Modified, Size Kind) of entire (non-visible) folder? Any apps that can do this?

    Been using Macs since before classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents including what's not visible on screen (Name, Date Modified, Size Kind) in entire folder?
    Screen shots are getting old hat.
    Tried select all, copy, paste into pages, but it didn't display date modified, size & kind, and also included images of selected files, which is too large. 
    Any apps/shortcuts/utilities that can do this?  Thanks in advance.

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

  • C: drive is full - move only iTunes Media folder contents to another drive without consolidating?

    My iTunes library contains a combination of music/movies/etc that I've purchased or downloaded from the iTunes Store as well as music I've purchased from Amazon and my own ripped CDs (not ripped via iTunes...other software).  The Amazon and ripped files have always lived on my D drive (for easier sharing betwen family members, without opening up permissions on our User folders), while the Store files all live under my User profile on C.
    I'd like to move the iTunes Media folder contents off of C and onto D.  All the instructions that use "consolidating" and "keeping the media folder organized" will not work for me, since I do not want all my files under the iTunes Media folder...I like them where they are now in D:\Music\Amazon and D:\Music\CDCollection.
    Do I have to resort to moving the files myself, adding them into the library again, then cleaning up the orphaned library entries that are pointing to the old location?
    Thanks!

    Copy the entire iTunes folder from your music folder to D:\iTunes.
    Click the icon to start iTunes and immediately press and hold down the shift key. Keep holding until asked to choose or create a library.
    Click Choose and navigate to the file D:\iTunes\iTunes Library.itl
    Check the library is working properly.
    Use the option File > Library > Organize Library > Consolidate Files to import any stay files to the new library folder.
    Delete the old iTunes folder on the C: drive.
    Ideally you will also backup this library to another drive.
    tt2

  • How do I back up contents of apps such as notes and office docs on my PC so that in the event of my ipad failing I can use these docs on my PC (windows op system)

    How do I back up the contents of apps such as notes and office docs on my ipad to my PC ( windows op system) so I can use them on PC if my ipad fails?

    You can use File Sharing in order to transfer the Word documents and the notes depending upon what apps you are using. Take a look at this.
    iOS: About File Sharing - Support - Apple
    There are file transfering apps like this one.
    File Manager - Folder Plus on the App Store on iTunes
    You can always email files as a last resort type of thing. That may not be practical depending upon the number of files that you have.

  • Imac slow to display folder content

    Hi,
    My Mid 2010 Imac 3.06 GHz Intel Core i3 with 4GB 1333 MHz RAM is currently having problems displaying folder content. As I am a photographer I am often opening folders of images and needing to view them and recently when I click on a folder or sub-folder the images can take upto a few minutes to display (making it look like the folder is empty). It only seems to happen intermittently.
    I have already checked hard disk space and have 371 gb free space. I was also advised to look at the green coloured free memory segment in the pie chart on the Activity Monitor which was very small. Since closing lots of programs which were sat on my dashboard and also deleting some items off of my Desktop this has now improved and is running around the 475 MB mark. Despite this, the displaying of folder content has NOT improved in the slightest.
    Can anyone help?
    Many Thanks

    Surprising that the RAM hasn't improved things. Once you've resolved the current issue I'm sure you will notice a boost in performance 12gb is ample RAM for most uses.
    Before re-installing it is vital to have a backup of all your data so that you can restore in the unlikely event of a problem. Re-installing the OS will not delete you data, but backup - at any time - is essential. An up-to-date Time Machine backup or a  bootable clone of your HD using an application such as Carbon Copy Cloner or SuperDuper! will do the job. Many on here keep both forms of backup.
    If you do decide to re-install the OS you can do it from the Recovery HD. Restart holding down Command + R and from the screen with 4 choices select Re-install OS - you'll need an active internet connection and you might need to input your AppleID credentials to perform the install. It's a 4gb download so it might take some time, depending on your connection speed.
    More details here: http://support.apple.com/kb/HT4718

  • How should I tag content created in a master page when addressing accessibility before exporting to Acrobat?  I can't add the content to the articles pannel because it's locked.  I would also like to know how I shold tag my cove content.  I dont' want rea

    How should I tag content created in a master page when addressing accessibility before exporting to Acrobat?  I can't add the content to the articles panel because it's locked.  I would also like to know how I should tag my cove content.  I don't want the reader to get lost in content other than the body of the report, but I also don't want to ignore some content completely by tagging it as artifacts.  What should I do y'all?
    Thanks,
    Josh

    Hi Rob,
    From the screen shots it looks like your script is not formatted properly (you may refer to 'Paladin Script' in 'Sample Project' to get an idea of how the script should be formatted.).
    Further please follow the steps mentioned below to use Story to PP workflow.
    Create a new Film script in Adobe Story
    Create  scene heading – INT. LOCATION – Day (these will show up in the outline view panel on left hand side)
    Hit enter, hit TAB
    Enter the name of the speaker, hit TAB or ENTER
    Copy over the transcribed text
    Build your script this way
    Number scenes from the production menu
    Export ASTX file for your script : File->Export->.astx
    Open Premiere Pro
    Create a new project, bring in media
    In the project pane, find the "Scene" column
    For the clip that contains the spoken text, assign the same scene number to the clip as you have in the story script (lets say both are scene 1)
    Click out of the scene box in the project panel in Ppro
    Right click on the scene that you just assigned a scene number to and select – attach Story script
    Select the .astx fle you exported in step 8
    Click ok
    You should now see the script data in the metadata panel for the clip in the metadata panel.
    You can now run speech to text based on "Embedded Script metadata" to time align spoken word to the script.
    Let us know if this is helpful.
    Thanks
    Rashi - Story Team

  • Why recently created wiki articles are not showing in profile Statistics page?

    Recently I have created a wiki.. altogether it should be 3 but under
    profile Statistics page it shows as two.. it almost two weeks now.. 
    Below are the wiki's
    (si-LK)http://social.technet.microsoft.com/wiki/contents/articles/19489.registry-import-not-all-data-was-successfully-written-to-the-registry-some-keys-are-open-by-the-system-or-other-process-or-you-have-insufficient-privileges-to-perform-this-operation-si-lk.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/19805.kb2817630-kb2817347-outlook-2013-si-lk.aspx
    (en-US)http://social.technet.microsoft.com/wiki/contents/articles/20586.how-to-change-ipv4-dns-server-address-to-public-dns-in-windows.aspx

    I think that if the activity has not shown up by now, that it will never show up, and your statistics will not be updated. I have had this happen to myself. When the Wiki is having performance problems, articles can be created or updated, but meta data
    is not updated properly. Sometimes this can be fixed, sometimes not. This issue is of major concern, but there is no fix yet.
    Richard Mueller - MVP Directory Services

Maybe you are looking for

  • How to compile the BEA's petstore in JBuilder 7?

    Hi: I want to unpack the BEA's petstore in JBuilder 7 and then deploy it to weblogic 7. What steps do I need to do? Have any advise? Thanks! John Lee

  • IPods Not Recognised by SL (Causing Problems)

    Initial installation of SL was fine, but then iTunes wouldn't recongise my iPod Mini and iPod Nano 1G (even after resetting both iPods). Without thinking, I then restarted my Mac with the iPod Mini still in its docking station. After initial reboot,

  • Having problems with and advanced form to Mail PHP app in Dreamweaver

    Hello, I would like to start off by saying i am horrible when it comes to php of any kind so i use an attachment for my forms call Advanced from to Mail PHP in dreameaver for connecting my site to my email contact for user data. I have had this probl

  • Memory leak in java stored procedure

    I use one simple example to test java stored procedure but i have met one serious problem. If it's not my fault, there exists serious bug of Oracle JVM. And the problem make it more like a toy. (1) java program Test.java public class Test { public st

  • XML schema changes

    Hi, Can someone tell me whats the best way to handle XML schema changes if there are already XMLType tables creates using the schema? I checked the Oracle XML DB developer's guide but didnt find any information on updating schema. Thanks, Hiren