CS4 | limit checkbox choice

I have made a nice web form with DW, with 6 check boxes. I would like to limit the number of checkboxes that can be clicked on to 3.
Can someone tell me if there is a tool/extension for DW which I can use that, doing a real time check (the moment he/she clicks on a third checkbox I show a popup screen saying that the max, number of checked boxes is limited? Thanks.

John Brinkmann has written 3 spearate blogs on exclusion groups and shows how to do this. Here is the 3rd entry, it has links the the other two inside.
http://blogs.adobe.com/formfeed/2008/10/exclusion_groups_v30.html

Similar Messages

Custom checkbox choice field for custom content type in sharepoint

Hi,
Created custom choice field as follows:
<Field
ID="{GUID}"
Type="MultiChoice"
Group="GroupName"
Name="Division"
DisplayName="Division"
Required="TRUE"
>
<CHOICES>
<CHOICE>Choice
A</CHOICE>
<CHOICE>Choice
B</CHOICE>
<CHOICE>Choice
C</CHOICE>
</CHOICES></Field>
Can anybody let me know how to make choice A and Choice B checkboxes are checked by default?
Any help would be appreciated.
Thank you,
AA.

Hi,
According to your post, my understanding is that you wanted to set the default value for the custom checkbox choice field.
You need to add the code:
<Default>=";#Choice
A;#Choice B;#"</Default>
The result is as below:
<Field
ID="{41A0820B-9EF4-4913-9A2A-1356F0ADE9B4}"
Type="MultiChoice"
Group="A
Custom Group"
Name="Division"
DisplayName="Division"
Required="TRUE"
>
    <Default>=";#Choice
A;#Choice B;#"</Default>
    <CHOICES>
      <CHOICE>Choice
A</CHOICE>
      <CHOICE>Choice
B</CHOICE>
      <CHOICE>Choice
C</CHOICE>
    </CHOICES>
</Field>
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Limit checkboxes on "prompt user for input"

Is there away to limit the selection of checkboxes on the "Prompt User for Input" dialog vi? I am trying to build a dialog vi that will allow the user to select/check only 1 item before clicking OK.
Attached is my VI. This VI takes a entered filename and check to see if it exists in a given directory. If it does not exist, then it created (display a message stating it will be created). If the file does exist, then the user has prompted to select 1 of 4 options (Append, Replace (Overwrite), Re-Name (select new filename) or Escape (exit without creating filename). Right now I am using front panel controls that become visible however I would like to replace these controls with a dialog box with the four options.
Ideally this file selection would be a sub VI in application and only execute when called and only be visible via the dialog boxes.
Thank you.
Attachments:
FileChoices.vi ‏210 KB

Like radio buttons? See
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/373f703eea0297368625620900701fd8?O...
Message Edited by Phillip Brooks on 10-16-2006 02:46 PM
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Limit font choice in indesign?

Hi,
Does anyone know if it's possible to limit which fonts show as a choice to use in indesign?
So if I had a list of 30 fonts to be available to use in indesign, I can only have them as a font choice in the indesign font drop down menu. So, no system fonts appear in the menu.
If indesign doesn't give this choice, maybe there is a plug-in?
Regards, Tim

gsmichaels wrote:
My wife has told her staff that they are only to use 6 pt and 8pt sizes of a particular font (or fonts) for a particular type of project. She also wants to limit spacing options between lines/paragraphs to one or two options.
One user seems unable to conform. Would it be possible for her, as Admin., to use the plug in(s) referenced or some other technique, to pre-set/limit the font/spacing choices for the licensed user who can't seem to format correctly?
The issue is project specific, but the projects are huge and frequent, so the setting would be used or useful again and again. I believe she has upgraded all licences to ID/ CS6.
thanks
I don't know if it's possible to limit a project that's been packaged to use only the fonts in the document fonts folder that's created when packaging; perhaps someone on the forum can say how to, if it's so.
However, as others have said, a team member who doesn't play by the team rules isn't a teammate. Rather than complete dismissal, it may be possible to reassign the person to projects that don't need this limitation, unless, of course, the same disregard for, or inability to follow, the rules isn't limited to just this one type of project. It might help to offer the person the opportunity to repay the costs of inspecting the files for rules violations and the costs of repairing them, as an alternative to being dismissed.
Seriously, this isn't professional behavior.
Regards,
Peter
Peter Gold
KnowHow ProServices

Displaying Information selected within a Checkbox Choice column on a separate line

I am looking to change the display output of a Choice column, which has checkboxes enabled for multiple selections, to show on Separate lines.
At the moment when more than one box is selected the data is separated by a comma
JR

Hi Treble99,
There is not an OOB way to implement displaying multiple values with separate lines. As the values are separated by a comma, you can replace the comma with break line.
Here are some posts for your reference:
http://stackoverflow.com/questions/16208081/comma-separated-string-to-linebreak
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9a58177f-f135-492b-97df-c6c70086c2d3/sharepoint-designer-show-line-break-for-multi-text-plain-text?forum=sharepointcustomizationlegacy
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

CS4 is no choice when reinstalling my CS6 upgrade

I have accepted (2012-03-07) the time limited opportunity to buy an upgrade from version CS4 to CS6.
At reinstalling now CS4 is not a choice as qualifying product at "Serial number upgrade"! How can I do?

Sorry, but you'll need to contact Adobe. Nobody here can help you with that.
You might be able to get it fixed with an online chat.
Bob

How to limit choices among a group of responders?

I am setting up a sign up form for a variety of choices. There are only a certain number of each choice needed. How can I make a form either hide or limit a choice once the necessary qty has been reached by other responders?
Thanks

Hi;
This isn't something that FormsCentral supports, you'd have to manually analyze the responses and once the max has been reached edit the form to remove that choice - you'd want to take care not to simply delete it since the corresponding column in the Response table would also be deleted.
In this type of case, if the item to be removed is an entire field as opposed to a choice in a single/multiple/drop-down choice field I'd recommend inserting an adjacent column in the response table and copying that columns data into the new row before deleting the question. If the option was simply a choice in a single/multiple choice or drow down field it can be deleted or updated and new responses will simply reflect the new choices, no need to duplicate a column to modify a choice field.
Thanks,
Josh

SHD0 : how to Restrict the choice of Business transaction in FBCJ ?

Hi,
I use Tcode SHD0 to create screen variant for Tcode FBCJ and itu2019s good
Now I want to limit the choice of Business transactions (in Cash payments table) to 5 Business transactions. So the user canu2019t select an other Business transactions out of this list of 5.
Please how to do this with Tcode SHD0 ?
Regards.

You can add or delete required business transactions in transaction code FBCJC2
Regards
Satya

Setting the No Limit flag in BAPI_PO_CREATE1

Dear All,
I created an ABAP to execute BAPI_PO_CREATE1 in a loop to create multiple PO's and I am encountering a wierd problem. I set both no_limit & no_frlimit flags to 'X' in structure bapiesuhc when creating a PO. It appears only the first PO has both "no limit" checkboxes set when I look up the PO in ME22 under the Service specifications screen. Any subsequent PO's created do not have the "No limit" checkbox set in the overall limit section. The other "Nolimit" checkbox under the the "Other Limit" tab is being set correctly.
I do a BAPI_TRANSACTION_COMMIT after each BAPI call and the code to load the Bapi structures each time are the same. I am am at a loss to explain what happened.
Any ideas out there?
Thanks!

Try this... and you are good to go!
Flag the field ITEM_INTVL with X in the structure BAPIMEPOHEADERX. But do not pass any value for this field in BAPIMEPOHEADER.
By doing this, PO is created with user defined item numbers instead of standard config sequence.
Check this note 418683.
Thanks,
SKJ

Bridge and Photoshop CS4 will not recognise the images shot in NEF file

Shot in Nikon D810 with NEF file but the images will not recognise with Bridge and Photo
shop CS4

That camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run. You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
Mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6

Why can't I open raw files from 5diii into photoshop CS4?

My second shooter has the 5Diii, and I am having trouble opening her raw files into my bridge and photoshop (CS4). I am using a 5Dii. The files are named differently and I can't preview any of her files in Bridge and Photoshop will not load them. ?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
The 5D Mark III was first supported by Adobe Camera Raw 6.7 (for CS5) and 7.1 (for CS6). ACR 6.7 is not compatible with CS4. CS4 is simply too old.
The 5D Mark II has been supported since ACR 5.2 which is compatible with CS4.
Your choices for the 5D Mark III:
Join the full Cloud
Join the Creative Cloud Photography Program (PS CC 2014 + LR)
Upgrade to CS6
Free option: Convert all 5D Mark III Raw files to DNGs using the free Adobe DNG converter then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG)

Lost communication btw cs4 bridge and photoshop cs4

I cannot double click a thumb in the bridge and enter Photoshop cs4. It brings up the Microsoft viewer instead. Nothing I have tried corrects this. I can get to Photoshop cs4 through camera raw, but that means opening all jpegs and tiffs in raw. Can anyone help? Perhaps I will need to download the upgrade to cs4 again. But installing the plugins for fractals and NIK software can be a drag. I no longer have cs3, so I can't revert to it
I have Windows XP professional on a Dell, two 500 gig internal drives and a 500gig LaCie external drive
Thanks
Paul

That camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run. You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
Mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6

IW31/32- Change Date Restriction choices for "StartPoint" and "End"

Hello,
In IW31/32> Operation tab> then "Dates" screen.
Is there a way to change Date Restriction choices for "StartPoint" and "End."
Start Point: there are 4 choices: Must Start on, Cannot start before, cannot start after, start from resource planning
End: Must finish on, Cannot finish before, finish not later, finish from confirmation.
We want to limit the choice to 2 optiions on Start and End/ in addtion change the text.
Is this possible.
Thanks,

Hi,
No its not possible to accomplish this in standard using configuration functionality.
You may able to accomplish restricting the values on the drop down through the implicit enhancement functionality available in ECC 6.0.
You will have to make a screen modification to make the associated start point/ end point key text editable.
Regards
Narasimhan

Authorization CRMD_ORDER- Limit Change to Customizing Request - SolMan 7.01

Hi together.
Our customer wants to limit change creation to customizing requests in Solution Manager 7.01 / Change Request Management. In CRMD_ORDER after adding the necessary information to the input mask, I choose Set to "in development" and save. Then the dialog "Create Transport Request" appears. How do I limit the choice to Customizing Request only? I made several authorization traces but I seem to miss the right authorization object.
Any ideas?
Cheers, Tobias

Hi Tobias,
I don't think you can restrict this using Solution Manager configuration as when the Create Transport Request screen dialog opens I believe it is from the development satellite system and not the Solution Manager.
You can restrict the system to no changes to repository and cross client customising using SCC4 on the satellite system, but this won't stop the option to create workbench transports.
I believe because the authorisation is contained in ChaRM RFC user, you could restrict authorisation of that user using a role make sure not to include:
Object: S_TRANSPRT
ACTVT: 01 - Create
TTYPE: DTRA Workbench Requests
Paul

Multiple SharePoint 2010 Survey Questions

Hi All
Apologies if this has been answered and solved somewhere else, but I have probably spent 4 days looking through the web for answers.
We have a SharePoint survey with multiple page breaks and branching. Here are the issues we need solutions for, please let me know if I need to add them as separate questions:
We need to change the "Specify your own value:" field to say "Other:" instead. I've read and tried the article from iedaddy
http://iedaddy.com/2012/05/sharepoint-2010-change-survey-option-specify-your-own-value-to-other/ multiple times, but I'm having no luck in getting it to work.
We also need to limit the number of checkboxes that can be selected to 3 in a multiple answers can be selected section. I've read the article on doing this
http://stackoverflow.com/questions/2770077/using-javascript-to-limit-survey-choices-to-three-unique-values but that doesn't work and looks like it might only be for 2007, even though some of the commenters said it worked on 2010.
Then we need to be able to export an individual's response to either a PDF or word format or be able to print it straight from the page. When right clicking and printing on the page it has the sides cut off. Someone suggested removing the "nowrap"
tag, but I'm unsure that will solve it and I'm not sure how to do that in SPD.
I also need to redirect the user to a "Thank you" page once they click finish. I've found a solution that works for a one pager, but since we use page breaks, this does not work.
I have access to SDP and limited knowledge of coding, but am willing to try.
Please accept my apologies if there are solutions for these, but I have not been able to locate any that worked for me on the web.
Thank you!

Hi, for your first problem I faced it sometime back and though not the sturdiest solution, it did function for me since I did not have very many "Specify your own values" to change.
http://social.msdn.microsoft.com/Forums/office/en-US/9349cde4-1ab6-40b3-b572-a7ddea748d8f/sharepoint-2010-survey-add-additional-text-boxes-beside-choicescheckboxes?forum=sharepointcustomizationprevious#4fdcdd7f-0443-4a98-b9d8-8527fad05d59
Looking at your other requirements, I am reminded of my own when I started off with the OOTB SharePoint survey and realized that it is very cumbersome to customize it because it will need you to meddle with the MasterPage and you don't want to take a risk
in Prod environment. I would suggest you to look into other options like InfoPath. InfoPath gives you a much easier platform to design and customize surveys. Page breaks are very easy to design. You can also implement your own code for PDF and publish it as
an admin template. I can promise you that the surveys come out much prettier.

CS4 | limit checkbox choice

Similar Messages

Maybe you are looking for