CSCtl86766 - Controller config backup task fails for controllers from PI

Does anyone know what the affected release for this bug, 8.0(34.0), is referring to?
As far as I can see, the most recent release code for present 4400 WLCs is 7.0.240.0 which means either this bug was found during the development of the new code version, 8.0 or 8.0(34) actually refers to the release of something else.
Any insights?
Many thanks

Similar Messages

Backup task failed with exit code -1

Hello all.
I have not been able to backup my Daylite database for almost 2 weeks. This is the error I am getting: "backup task failed with exit code -1"
I have a Mac Mini Server running 10.7.1 . I have plenty of disk space available 140GB and the Daylite database is about 1.7GB.
I had a corrupt disk and repaired it w/ disk utility and also verified/repaired permissions. I have tried backing it up to another location with no luck.
Anyone had a similar problem ??

until you delete the previous version in zlm and do a rug ref... or is this as designed
When you make changes to the bundle you need to apply them. That creates a new version and then you need to deploy that new version. Apply and deploy are on the same page. But I guess you know that.
If you already did that and still had problems, it might be the zen loader that needs a little bit more time. Once you hit deploy, a zen queue entry gets created that informs the zen loader to update the bundle xml file in the file repository. That file is delivered to the managed device when it queries for bundle information. So if that bundle xml contains the old version, the client will see that.
Problems here can be that the zen loader simply needs a few seconds longer then when you change to the device and run rug ref. Or there can be other queue entries that get processed and the bundle xml update is just in the queue and waiting. The zen loader has 5 slots for processing queue entries.
On the zlm server you can run "zlman ql I" for in progress entries and "zlman ql N" for new state entries that ned to be processed.
Or you can use the short script I posted (Cool Solutions: Monitor ZLM queue entries with Nagios) that shows you in one line how many and what type of queue entries currently exist. This is what I always use to get a overview about the queue status.
Rainer

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs
DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
(0x800423F3))
All the vss Writers are in stable state
Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
Host is 2012 R2 and The VM is also 2012 R2.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP

I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500

Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages

SCCM 2012 R2 CU4 - Site Backup Task failed

Hi, I set up a Site Maintenance Task for Backup our Primary Site, but every time I run this task it fail with the following message:
Error: Backup folder \\backupserver\backupshare$ does not exist or backup service does not have permission to access the folder.
I tried to use "erveryone" in share permissions and NTFS Permissions with Full Control and then the Backup works! ... I tried to remove the everyone from NTFS completely then the Backup also still works .. but when I remove everyone from the share
permissions (and grant the SCCM Site Server and SQL Server Computer Accounts the Full Control Permission) the backup fails..
so it seems to me that I have a permission issue ... what is the correct Permission setup for UNC Backup? (Share and NTFS Permissions) ... I tried to give the SCCM Server and SQL Server Computer and SQL Cluster Account Full Control without success...)
kind regards
Klaus

"The computer account of the site server and the computer account of the SQL Server, if SQL Server is installed on another computer, must have
Write NTFS and share permissions to the shared network folder."
https://technet.microsoft.com/en-us/library/gg712697.aspx
Also have you read this:
http://blog.msvconsultancy.co.uk/2014/07/sccm-2012-sp1-site-maintenance-backup-task-error/

Execute SQL Tasks Failing for Duplicate Syntax Between DEV and Production DB

Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
Thanks for your ideas...
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00

Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
If i understand correctly you are trying to run SSIS package from Window XP task scheduler. The reason for the failure may be due to permission while accessing resources required in the package. However it is difficult to suggest without
looking at the error message.
Scheduled tasks maintains a log file (Schedlgu.txt), in the c:\Windows folder. You can view the log from the Scheduled Tasks window by clicking
View Log on the Advanced menu.
The log file size is 32 kilobytes (KB), and when the file reaches its maximum size, it automatically starts to record new information at the beginning of the log file and writes over the old log file information.
Refer http://support.microsoft.com/kb/308558
http://msdn.microsoft.com/en-us/library/windows/desktop/aa383604(v=vs.85).aspx
Regards, RSingh

Backup continues failing for Exchange 2010

Exchange 2010 3 node DAG
Windows 2008 R2
With a Backup software - Symantec 2010 backup exec
Daily backup of my database is failing continuously for last 2 weeks

Please check below url and let me know if you have any confusion on this.
http://social.technet.microsoft.com/Forums/exchange/en-US/8830433c-c0f3-4a0e-a3ac-c56f9a084d6d/exchange-vss-writer-is-in-failed-state?forum=exchange2010
Regards, Sourabh Kumar Jha | Please mark it as an answer if it solves your problem or vote as helpful if you like it. |

Site Backup Task fails

I am using SCCM2012 R2, I am trying to take backup i am getting error, i am using domain admin account, i gave full access to it in SQL , in sharing and security permissions(folder) i gave full access. (MY SCCM and SQL Server are in one box)
Warning: SQL installation root directory is empty: The registy key "SOFTWARE\Microsoft\MSSQLServer\Setup\SQLPath(populated by configmgr setup) was found empty
Backup Folder doesnot exist or backup service doesnot have permission to access teh folder

Hi
You need to give the computer account of the site server and the computer account of the SQL Server, if SQL Server is installed on another computer, Write NTFS and share permissions to the shared network folder.
By the way, I would recommend that you create your backup from SQL (SQL maintanence) instead. The only advantage of using the ConfigMgr Backup maintenance task is that you can specify what to do after the backup has completed in the AFTERBACKUP.BAT
file created in the smsbkup.box.
For information about how to create a ConfigMgr backup in SQL check out this post:
https://stevethompsonmvp.wordpress.com/2013/06/07/sql-server-backup-recommendations-for-configuration-manager/

[AUTOSCALE FAILED] - Autoscale task failed for INSERT_CLOUD_SERVICE_NAME due to no metrics available

Receiving multiple "Autoscale Failed due to no metrics available" errors on all of our cloud services. Looks like Azure cpu monitoring stopped around 8am EST this morning on all of our cloud services . Tried restarting my cloud
services but no help. Obviously a backend issue in Azure...Microsoft, can help me out and look into this?

Hi,
Azure status (http://azure.microsoft.com/en-us/status/#history) have issues report now, below is the detailed information.
Cloud Services - Multiple Regions - Partial Performance Degradation
1 hr 14 mins ago
As early as 1 August, 2014, some customers in North Central US, East US, Japan East, Japan West, and Brazil South may have been experiencing issues with their Auto-Scale implementations. Errors may include messages regarding the inability to read Auto-Scale
metrics data. We have identified a potential root cause, and are working on an extended recovery plan. An update will be provided within 6 hours, or as events warrant.
Please try again after this incident mitigate, sorry for any inconvenience.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[AUTOSCALE FAILED] - Autoscale task failed for [domain] due to no metrics available

Hi,
AutoScale on my cloud service is not working due to no monitoring metrics avaiable.
I set the AutoScale scale by CPU metric.
For the Monitoring, I use Minimal Monitoring.
and from the Monitoring tab there's one metric of CPU percentage.
The strange things, I can see the graph if 24hours but the graph only reach 5 hours behind.
so.. If I change the monitoring to hourly, the monitoring graph display nothing.
I have tried to delete the autocale, delete the metrics and recreate them.
Please advise.

Hi,
From my experience, this may be azure server issue. It may be fixed some time later. You can try it again now to see if it works. You also can try to stop the cloud service then restart again (click cloud service>> click dashboard >> click restart).
Hope this helps. if this didn't give you help, please feel free to let me know.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Foreach Loop Container with a Data Flow Task looking for file from Connection Manager

So I have a Data Flow Task within a Foreach Loop Container. The Foreach Loop Container has a Variable Mapping of User:FileName to pass to the Data Flow Task.
The Data Flow Task has a Flat File Source since we're looking to process .csv Files. And the Flat File Source has a Flat File Connection Manager where I specified the File name when I created it. I thought you needed to do this even though it won't really
use it since it should be getting its File name from the Foreach Loop Container. But when attempting to execute, it is blowing up because it seems to be looking for my test file name that I indicated in the Flat File Connection Manager rather than the file
it should be trying to process in User:FileName from the Foreach Loop Container.
What am I doing wrong here??? I thought you needed to indicate a File name within the Flat File Connection Manager even though it really won't be using it.
Thanks for your review...I hope I've been clear...and am hopeful for a reply.
PSULionRP

The Flat File Connection manager's Connection String needs to be set to reference the variable used in the ForEach Loop:
Arthur My Blog

FTP_CONNECT failed for SAPFTP from WD4A to external Server

Hi experts,
this is a challange to you.
He do have a WD4A application runnig on a BI with SAP NetWeaver 2004s and a SAP BASIS 700 Level 21 highest Support package SAPKB70021.
The application runs well and only some strange behaviors in CZ and HU we have obtained. But this is not the Question i will ask:
For an excel template download we will use at an external MS Server2003. We want to sent the data string which has to
be displayed in excel via FTP to this server (The server will convert the data string with makros and send it back zu WD4A).
So far so good. But every time we tried to open the connection with FTP_CONNECT we the communication failed.
What do we do exactly?
1. Event through Button
1. Creating the data string on Eventhandler method (View)
2. using a Function Call from Eventhandler to start the file transfer.
3. Parameters are user, pwd, host, destination ...
4. with HTML_SCAMBLE hint pwd
5. call function 'FTP_CONNECT'
The connection failed.
WE DO CALL the Function correct, cause testing FTP_CONNECT with Program RSFTP002 the connection works.
IF we start the Function Call we use inside the WD4A outside the WD4A, the connection works.
We do have an ITS Service which works on this Server. An RFC CALL to the ERP R/3 with the same Function Call fails also as the Call in BI.
Does anyone know, if there are technical limits to WD4A to use the connections to an external server via SAPFTP ? It is forbidden to mount the file system of the server directly on the SAP BI System.
Our Basis and Network guys would not find anything.
At least: WE do use an Excel download with templates without using the MS Server. Therefore we have problems with different MS Office Versions, Language and date display. Thats why we want to go the way above.
lot of greetings
Thorsten

Hi,
where exactly is the FM crashing and why? Did you debug? Is it occuring at
CALL FUNCTION 'FTP_CONNECT' DESTINATION RFC_DESTINATION
     EXPORTING USER = USER PWD = PASSWORD ACCT = ACCOUNT HOST = HOST
               TRACE = FTP_TRACE GUSER = GATEWAY_USER
               GPWD = GATEWAY_PASSWORD GHOST = GATEWAY_HOST
     IMPORTING HANDLE = HANDLE ERROR = CERROR
     EXCEPTIONS SYSTEM_FAILURE = 1 COMMUNICATION_FAILURE = 2.
or earlier?
Try tracing with ST01, one time with the way it works, and another time out of the WebDynpro where it crashes, then compare the logs.
regards, Lukas

LOGIN FAILED for POP3 from multiple clients

Hi - I recently moved (changed service address). Since then, I have not been able to POP or IMAP my mail. It was working perfectly for many years before then. Many calls and chats with tech support have resulted in promises for Comcast to have someone call me - but they never call. Basicaly I'm very stuck.  I can log into my comcast webmail perfectly and everything is great there. I've tried every combination listed on this page: http://customer.xfinity.com/help-and-support/internet/email-client-programs-with-xfinity-email/ And this one: http://customer.xfinity.com/help-and-support/internet/configuring-comcast-email-mac I've tried it on multiple Macs, iPhones, you name it. Very carefully make sure username, password, SSL enabled, ports, etc. etc. are correct. No combination ever works.  Related - perhaps? When I moved my email was completely disabled. Tech support said that happens when you change addresses. Pretty darn strange as email is virtual and shouldn't be related, but okay. Tech support re-enabled it and then webmail worked, but still no POP or IMAP.  Comcast Tech Support really doesn't have a clue here how to even understand the issue, let alone fix it. I'm kind of thinking somewhere in there they need to enable the account to allow POP3 access or something, but I can never get to anyone that knows what they are doing.  Ideas?? Thanks for any help or ideas anyone has.

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

LMS 4: VLAN config fetch failing for all devices

LMS 4.0.1, standalone on W2K8 R2, new install
Vlan config fetch is failing for all devices. If I attempt to put a vlan.dat file in tftpboot and then manually copy a vlan.dat file from a device, the following is returned:
TFTP: error code 2 received - 16739
%Error opening tftp://server_name/vlan.dat (Permission denied)
The Windows application logs ont the server log this:
Log Name:      Application
Source:        CRMtftp
Date:          6/15/2011 2:07:49 PM
Event ID:      3
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      server_name
Description:
GetEffectiveRightsFromAcl failed: Overlapped I/O operation is in progress.
(997)
I tried restarting crmtftp, but no luck. Any ideas what may be causing this?
-Jeff

I have the same issue with a freshly installed 4.2 version now:
Log Name:      Application
Source:        CRMtftp
Date:          2/24/2012 12:30:50 PM
Event ID:      3
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      srvwienlms.nts.local
Description:
GetNamedSecurityInfo failed failed: The operation completed successfully.
(0)
I will also open a TAC case, lets see if we still have to stick with a3.x TFTP binary...
br.herwig

ISE Config Backup Failure - Data filesystem full above threshold

Hi,
Both the config and operational backups were working until earlier last month. Now the config backup is failing with the following error. No configuration or repository settings were changed.
ISE 1.2.0.899 Patch 8 - Clustered with persona Node 1 = PAN, SMN, PSN .... Node 2 = SAN, PMN, PSN
CLI history says the same:
The local repository (disk:/) is looking good. The "/" filesystem is taking 77% space.
Although it may not be relevant. Data Purging is set to 30 days in the GUI and Operations -> Reports -> Data Purging Audit indicates its running daily with success i.e. threshold_space = 80GB, used_space = 3GB.
Is there a way to clean "/" filesystem ? It is filling up by roughly 1% every 5 days ? Note: the same on Node 2 is only 24% full.
Any ideas on how to get the config backup issue resolved ?
P.S. If images don't appear inline, please see the attachment
Thanks,
Rick.

922963 wrote:
Hi JK,
Thanks for response. Yes, I am worried that it may not be enough. How about if I increase memory to 32GB, ie. I have two servers, both with 32GB? Will it be sufficient in case of one physical server fail for 8GB data?
What is the point in having the 3rd physical box if two boxes have enough memory/capacity? You know, we need to pay licence according to no of CPU.
thanks,
HenryHi Henry,
actually the recommended minimum number of physical boxes is 4 so that the witness protocol participants can all be on separate machines.
But a minimum of 3 is highly recommended for a number of reasons related to partitioning:
1. If you have only 2, then you are much more vulnerable to split brain scenarios (should for some reason the two servers not be able to communicate with each other, it is harder to decide which half should be the winner). In short how do you decide which box is unable to communicate with the rest of the cluster if there are only 2 boxes?
2. You can't ensure a balanced and also machine safe partition distribution if you have a mismatching number of nodes on only 2 boxes. It would either be balanced or machine safe, but you can't get both at the same time. And you will either have mismatching number of nodes at startup or have mismatching number of nodes after one node failure.
Best regards,
Robert

CSCtl86766 - Controller config backup task fails for controllers from PI

Similar Messages

Maybe you are looking for