CSCui75778 - C3945 stuck after error message VC_DMA-3-SR_ERROR

is there any update ?

hi,
i would request yiu all to pay attention on this and help me out
CALL FUNCTION 'RSD_IOBJ_INCL_ATR_NAV_GET'
    EXPORTING
      i_iobjnm       = i_iobjnm
      i_objvers      = rs_c_objvers-active
    IMPORTING
      e_s_cob_pro    = l_s_cob_pro
    EXCEPTIONS
      iobj_not_found = 1
      illegal_input = 2.
IF sy-subrc <> 0.
    MESSAGE x299(brain) WITH 'LRSDG_IOBJ_DB_READF40'
                             'REGULAR_IOBJ_GET_FOR_META'.
ENDIF.
+ time charact --> time dimension / In BEX not visible+*
IF i_iobjnm = rsd_c_chanm-date OR
     i_iobjnm = rsd_c_timnm-calday.
    l_s_cob_pro-chasel     = rsd_c_chasl-not_allowed.
    l_s_cob_pro-chanav     = rsd_c_chanv-not_allowed.
+*   from 3.0 these InfoObjects are marked as META objects+*
+    l_s_cob_pro-iobjtp     = rsd_c_objtp-meta.+*
+    the olap processor uses 0DATE / 0CALDAY as default for exceptional aggregation -+*
+    therefore it has to be in the cobpro+*
+    but it must not be of type META, since then day of validity logic+*
+    does not work+*
+    solution for 3.0: OLAP processor uses the flags CHASEL and CHANAV to determine+*
+    if 0DATE / 0CALDAY is part of the infocube+**
PLEASE HELP WITH SOME WORK AROUND
sanjeev

Similar Messages

Delivery gets created in VL01N - Return scenario even after error message

Hi,
I am having following issue explained in details in steps -
We have a service return scenario and following steps have been followed in ECC.
Material code used in this case is batch managed material.
Step 1 u2013
We have created a sales order(VA01) with document type ZRE(Itu2019s a kind of return order). This return order actually coming from CRM.
Step 2 u2013
We are creating delivery using VL01N transaction for return order.
Step 3 u2013
We avoid giving batch number in VL01N and try to save the delivery document. System prompt error saying u201CEnter batchu201D. Subsequently we press return keys to cancel the error message and try to come out of the transaction.
Step 4 u2013
Instead inputting batch number, we try come out of the document creation step.
Step 5 u2013
We go to document flow button of sales order and we could see the delivery created although we came out of the delivery creation process after the error message, without saving the document.
Also note instead of coming out of the document creation, if we again try to save the document, system throws update termination with a reason saying u201CError info... ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPRECu201D, which is quite obvious as system has already created the delivery and we are trying to create / save the document once again in VL01N
We are in dilemma now.
What is the cause of this abnormal behaviour? I don't know.
Any one experienced this, feedback is appreciated,
Regards,
Dipak

Hi,
The SAPSQL_ARRAY_INSERT_DUPREC error is not bothering me much.
My worry is once "Enter batch" error message comes, I am not interested to create the delivery any more.
So I come out of the transaction by pressing return key.
Now when I press return key, system gives me the delivery number, this should not be the case as message given was an error message.
If I go to the SE16N, I could see the delivery number in database.
Also system prompts me to save the delivery which I am not interested to do, just I want to come out after error message.
What could be the reason, I don't know. Ever after error message system gives you the delivery.
Which is very strange.
Any input is apprecited,
Regards,
Dipak

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

Edit screen after error message in module pool

Hello Experts,
In our scenario ,we have some checks over inputs given in a table control of module pool screen.Requirement is that after error message we need to display that record of table control in editable mode.
Thanks.

Thanks for the reply...The issue was resolved by dispaying information message and using EXIT to stop program flow.

Rejects new cartridges and stuck in error message mode

Mac OS X 10.6.8 My HP Officejet Pro 8600 Plus won’t accept new printer cartridges (not the originals). It also is stuck on an error message stating there’s a problem with ink cartridges and suggests turning printer off and on. This has been done numerous times with no change. Am trying to get to Setup menu to try resetting printer defaults. Have also tried unplugging machine for 30 minutes with cartridges removed and restarting, then replacing cartridges. It remains stuck on error message. Wireless system.

Hello Janedra, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into cartridge issues, I would like to try and assist you with that today!
Are the cartridges you are using HP genuine cartridges? Have they been refilled or remanufactured?
I would suggest running through this document: An 'Ink Cartridge Failure,' 'Incompatible Ink Cartridges,' or 'Ink Cartridge Problem' Error Message ....
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HT4623 my iphone froze up after error message

my iphone froze up after error message and i am now unable to restore. showing usb connections with arrow to Itunes. how do i fix this?

If by the "starting screen" you mean the Apple logo, then your phone is coming across a software issue that prevents it from finishing it's boot sequence. You will need to replace the software and firmware on the phone to get it back up and running. Doing this will also remove your data from the phone, so hopefully you have synced recently.
To put your phone into DFU recovery mode:
1. Make sure your phone is connected to a computer with iTunes on it.
2. Hold down the sleep/wake button and home button at the same time for 8 seconds.
3. Let go of the sleep/wake button and continue holding the home button.
4. If successful, the phone's display will main black and a dialogue box will appear in iTunes stating thet it detected a phone in recovery mode.
5. Click OK, then click Restore.
After that the phone should be up and running and you can sync your content back.

Premiere Elements 12 does not start after error message: display driver is incompatible

After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?

Moonkeys25
Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
Moving forward...
If you issue was specific to the display card error that you have been getting then probable conclusions
a. the ADM Radeon H7610M driver version is not up to date
or
b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
https://www.piriform.com/ccleaner/download
When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
Thanks.
ATR

Bridge CS5 freezes after error message...."The operation could not be completed, there is not....

Error - The operation could not be completed. Not enough storage is available to complete this operation.
After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle). However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available. I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
Here are some of the things I have tried:
reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
-What else can I try?
-Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
Please help, I am willing to try anything to get this to work. It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine......
Thanks in advance for any advice or insturctions you may offer!

Dear Customers,
I am Baichao Li, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
                Select "Use Custom Rules",
                Browse to a custom dump file folder,
                Check "All Exceptions",
                Check "Ignore Exceptions that occur inside Kernel32.dll",
                Select "Mini Dump Type" to "Small"
                Select "Save Mode" to "Cyclic Saving 5 times"
                Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li

Screen exit Payment document saved when press enter after error message

Hi All,
I have created a screen enhancement for payment document WZR1.its in additional data tab under header details.
Here i should populate a error message when user save the payment document without entering values to custom screen fields.It works fine with Function exit LWZRE017 . It populated the msg and the screen is disabled but after when i press enter button the document is saved and created.
please let me know how to stop saving the document without entering values in custom fields.
Thanks,
Arun kumaran.
Edited by: Arun Kumaran on Mar 4, 2010 12:09 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:26 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:43 PM

I found the fcode when enter is 'ENT1' it is from standard screen program.
I populated the same message when UCOMM = 'ENT1' still not working.
ARUN KUMARAN.
Edited by: Arun Kumaran on Mar 5, 2010 1:36 PM
Edited by: Arun Kumaran on Mar 5, 2010 2:11 PM

After error message has been displayed , unable to check multiple selction.

Hi experts ,
I have developed an interface tosend data to thrid party tool. But there is a single issues with it.
Whileproviding inputs at selection screen the selection-screen fields are not validated properly.
Could somebody please correct me on this :-
I have a validation check for a select-option with NO Intervals.
Any incorrect value in the Select option then an error message displayed . Now if there are multiple values in the Selct-option multiple selection then also the error popos up showing the wrong entires . But when i try to change again i.e click on multiple selection then it doesnot allow the user to enter and correct those entries.
Could you please let me know the best posible way to check teh above scenario ?
Thanks
Kylietisha

Hi,
try to put our validation logic in the AT-SELETION SCREEN event so that it will allow you to crrect the values in the selection screen option after displaying of the error message.
to check the mutiple value validations, try to get the entries from the validation table into an iternal table. if internal table contain a vaue then there are some valide entres present in the given input vaues. if table is empty then display the error message.

"Get Variants" button disabled after error message in AT SELECTION SCREEN

Hi,
In "AT SELECTION SCREEN" I throw an error message if certain criteria return no data.
After the error message is thrown, the button for choosing variants no longer appears to work. I click it and the variant selection box doesn't come up. It just changes the values that have been populated from red to black.
What is the code that remedies this? If an error is thrown, it should allow you to select a variant still.
Thanks,
Kevin

"AT SELECTION SCREEN" is not an option here. Let me clarify.
In START-OF-SELECTION, I call another program with a SUBMIT statement. That program uses a logical database. So it makes no sense to move this to "AT SELECTION SCREEN". Even when I did that, I still couldn't solve this problem.
If the SUBMIT statement returns no data (if sy-subrc = '4') then I need to go back to the initial screen. I need to display some kind of message, of type I or E or S, I don't care.
It just needs to go back to the selection screen and VARIANTS need to WORK, and you need to be able to SAVE the variants.
For some reason, if I get no data with the SUBMIT statement, I can display a message and get back to the selection screen but variants do not work. I've tried EXIT, STOP, CALL SELECTION SCREEN 1000 (the only one in the program), END LIST-PROCESSING, etc. NOTHING WORKS!

Stuck Key & Error Message

Thinkpad T410i windows 7. Getting a stuck key 4D message on startup, can boot just by pressing escape twice, but then getting a persistent and intermittent / random error message pop up. The error message is blank and contains no information other than the word Error. My keyboard seems fine, no jammed keys.
Any ideas?
Solved!
Go to Solution.

Think I found the solution myself: seemed to be some kind of conflict with MobileMe control panel, so maybe something to do with syncing and nothing to do with the keyboard. Uninstalled the programme and the problem is solved.

Report terminates after error message

Hi all,
     i had created an alv report ,grid display.I am using a few error messages frm a message class.Whenever i am performing an operation AFTER the error message is displayed,( like clicking back button,clicking any push button,when trying to debugg using /h..ect..) the entire transaction exits/ it comes out /terminates...pls help me on this
.... i am even unable to debug using /h...
Regards,
Devendran
Edited by: Paramaguru devendran on Mar 21, 2008 7:13 AM

Hi
I think it doesn't make a sense to set a warning or error meesage in the user_command of ALV, usually it's better to use an information message and exit from the routine (method):
METHOD handle_user_command.
    IF <velidation>.
       MESSAGE IXXX(YY).
       EXIT.
    ENDIF.
ENDMETHOD.
In this way the program will be out from the method and doesn't run the abap code after the message and back to the ALV.
Max

Navigation to another view after error message appears

Hi,
I have a requirement to enhance a the FPM component FITE_VC_RECEIPTS Receipts for Expense Report , to display the messages according to the expense type. These messages are for itemization. If an error message appears, i need to click on
enter itemization and enter to that view,itemize that particular expense type and then the error message should disappear after itemization is done.
But presently if error message appears i am unable to navigate to the itemization view as the navigation_abort is set 'X' and also the rv_response = 'CANCEL' in FITV_FPM.
Please suggest as how to enhance the component so as to recify the error messages and navigate to the itemization view.

It is bit complicated to advice without seeing your source and understanding the problem.
In webdynpro i would have done something like this
enhance in the process_event method and return ev_result - defer. (failed status is equivalent to you cancel and navigation_abort ).
You can try to enhance like this and try out changing the values for navigation_abort and rv_response.

Events after error message

Hello experts,
I want to initialize a checkbox in hierarchical list after error.
I've got some problems to understand the event-flow.
The facts:
I'm displaying a hierarchical list and, on user-command, i check some values.
If there is an error, i send a message.
When the user get the message and then click OK, I want to initialize the checkbox field of my hierarchical list.
I don't know where i have to place my abap code to do that: at user-command, or is there an event i ignore to do that.
Thank you for any help,
Christine

Hi,
I've solved my problem my using the BAPI POPUP_TO_CONFIRM which display the error message.
So i can test the answer, and decide to refresh the whole display of the list.
Regards,
Christine.

CSCui75778 - C3945 stuck after error message VC_DMA-3-SR_ERROR

Similar Messages

Maybe you are looking for