CSS 11500 - Support IPV6

Does the 11500 series support IPV6? If so, what code level was it first introduced in? If not, when will it be supported? Thank you!

not supported and will never be on the CSS.
A new device will be created and it will come with many new features including ipv6 support in hardware.
Gilles.

Similar Messages

  • What is the appropriate product name for CSS 11500 on Bug Toolkit

    Today I tried to search DDTs of CSS 11500 on Bug Toolkit (http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl), however I can not find out appropriate product name corresponding to CSS 11500.
    Before I had searched DDTs of CSS 11500 on Bug Toolkit many times, at that time, if my memory correct..
    I selected "Cisco CSS 11500 Series Content Services Switches" in the list of "Search for bugs in other Cisco software and hardware products" on Bug Toolkit.
    But I can not find this product name today.
    Do you know what product name appropriate for CSS 11500 on Bug Toolkit ?
    Your information would be appreciated.
    Best regards,

    Hi Gilles,
    Thank you for your cooperation.
    Today, I can find the CSS at "new Bug Toolkit".
    http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
    Select Product Category: Application Networking Services
    Select Product: Cisco CSS 11000 Series Content Services
    So I understand I should go "new Bug Toolkit" instead of old "Bug Toolkit" to
    search any DDTs for CSS 11500.
    Many thanks.
    Best regards,

  • Cisco CSS 11500 and RDP

    Dear NetPros:
    Does anyone know that does Cisco CSS 11500 Series Content Services Switch support 'Session Caching of RDP Clients? session for roaming of disconnected sessions' features?
    Thanks
    Bernard

    The Cisco CSS 11500 is a compact modular platform, specifically designed to provide robust Layer 4-7 traffic management services for e-business applications in Internet and intranet data centers.
    This URl should help you:
    http://www.cisco.com/en/US/netsol/ns340/ns394/ns50/ns254/networking_solutions_package.html

  • Do CSS 11500 series allow remote SPAN?

    Hi,
    I found SPAN (Switch port analyzer) is available on CSS 11500 series, but could only found destination must be local. Is it possible to do remote SPAN and make the destination be in another remote switch?
    And how many local span sessions are allowed?
    Thanks,
    Rgds
    Jorge

    Cisco WebNS Software Version 7.20 delivers support for a new Cisco CSS 11501 model and Cisco WebNS Software 7.20 supports SPAN the features.
    Switched Port Analyzer (SPAN) or port mirroring is useful for network analysis?a copy of the packets received or transmitted by a source port is sent to a designated destination port.
    Kindly go through these links to get detailed information:
    http://www.provantage.com/cisco-systems-css11503-ac~7CSCO288.htm
    http://www.cisco.com/en/US/products/hw/contnetw/ps792/prod_release_note09186a008077c440

  • CSS 11500 Certificate Signing Request (CSR)

    Would any of you know if and how to configure / general a wildcard or multi-domain SSL certificate on a CSS 11500 appliance? The "SSL gencsr ..." command doesn't seem to allow me to add more than one domain name during the information gathering.
    Any help or input would be greatly appreciated.
    Thanks,

    WildCard certs are supported on CSS.
    The only thing that makes it a CSR for a wildcard certificate would be that the common name would be something like "*.yourdomain.com".
    Since a wildcard certificate represents multiple domains, it can be re-used on the
    multiple https content rules of different IPs.
    The CSR procedure for a wildcard certificate on the CSS is not different than the CSR
    procedure for a regular certificate (You just need to put something like "*.yourdomain.com" in front of common name):
    CSS11506(config)# ssl gencsr app1key
    Country Name (2 letter code) [US]US
    State or Province (full name) [SomeState]CA
    Locality Name (city) [SomeCity]San Jose
    Organization Name (company name) [Acme Inc]Yourdomain Inc.
    Organizational Unit Name (section) [Web Administration]SSL Admin
    Common Name (your domain name) [www.acme.com]*.yourdomain.com
    Syed

  • Services with different IP address subnets over CSS 11500 series

    Hi all folks!
    I have two CSS 11500 series...
    In just a few months i will have ready a DRS (Disaster Recovery Site), where i will have 2 more servers to add to the environment.
    But this servers will be in a different subnet from that today i have for the servers who are configured in the current services of my CSS.
    So then the doubt i arises is:
    Is correct to add two new services with these servers, but using the IP addressing of the DRS site???, and including on the CSS a static route to this network, (of the DRS) in order to reach them?? is it correct, it will work well?
    This would be so....
                 ________________LAN to LAN_____________________
                 |                                                                                |
                 |                                                                                |
    |------SITE A------|                                                        |------SITE B------|  
         [Firewall] ===============IPSEC============= [Firewall]               
               |                                                                                |
               |                                                                                |
    [CSS-A]-[CSS-B]                                                            [SWITCH]
           |          |                                                                     |         |         
         [SWITCH]                                                                    |         |                                                                 
    [srvA] [srvB] [srvC]                                                          [srvD] [srvE]
    So, at [CSS-A] & B, i will put a static route to firewall that know the subnet of site B through the IPSEC tunnel.
    So In the CSSs, i will add the new services for the Servers "D" & "E" with the IP address of Site B.
    This should be seen as well:
    !*************************** GLOBAL ***************************
    ip route 0.0.0.0 0.0.0.0 [IP FIREWALL]
    ip route SITE B [IP FIREWALL]
    !************************** SERVICE **************************
    service srvA
      ip address A.A.A.x
      port 8080
    service srvB
      ip address A.A.A.x+1
      port 8080
    service srvC
      ip address A.A.A.x+2
    port 8080
    service srvD
      ip address B.B.B.y
    port 8080
    service srvE
      ip address B.B.B.y+1
    port 8080
    I know that this practice is not the most desirable, in fact should use"Basic Global Server Load Balancing Site Redundancy Using the CSS with DNS", but I don't have much time to change the entire environment today, and in this first stage i have to begin with this poor but quick solution that i thought and i wanted to be validated if there is posibliidades this to work
    Within their experiences that they say? Will operate?
    Thanks in advance!
    Regards!
    Esteban =)

    Daniel!
    Sorry by delay!
    Thank you so much for you time for reply.
    You have given me a great help to this doubt!
    But..using "source group" let me know..
    I can´t undertand the really difference between NAT with ACls as you can see at this link: (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080093dfc.shtml)
    and
    this other link, using NAT (from the piont 5), (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080093dff.shtml)
    where the NAT is configured under a method different from the previous one..
    So.. for this scenario described above, which would you recommend using? I would think that the second is the most indicated truth? What do you think?
    Thanks in advance again!!!
    Have nice day!
    Regards.
    Esteban.

  • Does oracle application server 10.1.3.3 supports IPV6

    hi
    Anyone let me know does oracle application server 10.1.3.3 supports IPV6.
    thanks in advance
    Arunachalam

    Hi
    I believe this is covered in the online documention:
    http://download.oracle.com/docs/cd/B32110_01/core.1013/b28944/opmnxml.htm#BABIICIJ

  • Firmware upgrade for WRT120N to support IPV6?

    IPV4 IP addresses will be running out in less than a year and I wanted to know, will there be a firmware update for WRT120N to support IPV6?
    If not, why?
    Also, if I have to buy another router to support IPV6, I'm going to buy a D-Link. It's nothing personal, I just find it absolutely idiotic that a router that supports wireless-N doesn't support IPV6. You have to ask your self, how does the standard IPV6 spec thats a few years old not make it to the final product of a router, but a non-standard wireless-N spec implementation somehow got the O.K....?

    If you want to know about a firmware update you have to call Linksys support. You won't get an official answer here.
    It's absolutely not ridiculous. Maybe IPv6 implementations are around for a while. But it was mostly basic routing and connectivity. All major companies only started maybe two or three years ago to fully support IPv6 in their pro devices. Before that, IPv6 was usually an update not included in the base firmwares. Often it was a paid option. And even today you'll find IPv6 not really equally supported in high-end firewalls which is why some companies are even now reluctant to deploy IPv6 because they are afraid to weaken their firewalls...
    And you write yourself: your provider is testing IPv6 now. Isn't that ridiculous, too?
    And even today you'll find many client devices in stores which don't at all support IPv6, yet, for instance printers, VoIP phones...
    Thus which consumer brand do you think is so much more trustful? And to work perfectly on an Internet connection where even your ISP is still in test phase?

  • Hyperion System 9 BI supports IPv6?

    Hi I would like to find out if the following hyperion applications supports IPv6?
    - Hyperion Shared Services 9.2
    - Hyperion BI 9.2
    - Hyperion Interactive Studio 9.2

    -Centralized administration using Shared Services.
    -Workspace introduction for user friendly interface.
    -Centralized user management, provisioning.
    -Hyperion Business Rules are moved as a part of EAS now.
    ...and many more from architecture pov.
    Contact us for more details.
    Harbinger Consulting Group
    www.harbinger-group.com
    763 785 1028

  • Does Outlook 2011 for Mac support IPv6

    Doest anyone know whether Outlook 2011 for Mac support IPv6?
    If yes, how to configure?
    I checked IPv6 Support in Microsoft Products and Services which lists Outlook 2007 but does not list Outlook for Mac or Office 2011 for Mac: http://technet.microsoft.com/en-us/network/hh994905.aspx .
    From https://wikispaces.psu.edu/display/ipv6/IPv6+on+OS+X#IPv6onOSX-NonIPv6enabledapps  I can know that Entourage 2004 and 2008 don't support IPv6.
    The key question is Microsoft has no official KB link saying whether Outlook 2011 for Mac client supports IPv6.
    Thanks,

    Compatibility of Outlook 2011 with IPV 6
    Entourage 2004 and 2008 are  Not Compatible IPv6-enabled apps
    on the below URL outlook 2011 is not mention
    http://technet.microsoft.com/en-us/network/hh994905.aspx
    They need official KB link saying whether Outlook 2011 for Mac client supports IPv6.
    I have done search but not found related information on this
    found the below information
    System Requirements
    • A Mac computer with an Intel processor.
    • Mac OS X version 10.5.8 or later.
    • 1 GB of RAM recommended.
    • 2.5 GB of available hard disk space.
    • HFS+ hard disk format (also known as Mac OS Extended or HFS Plus).
    • DVD drive or connection to a local area network (if installing over a network).
    • 1280 x 800 or higher resolution monitor.
    Additional services required to use some features:
    • Certain online functionality requires a Windows Live® ID.
    • Outlook® and certain features require Internet access (fees may apply).
    • Exchange support in Outlook 2011 requires connectivity to Microsoft Exchange 2007 SP1 RU4 or later.
    •Access to files stored on a SharePoint server requires connectivity to Microsoft Office SharePoint Server 2007 or later.
    •Co-authoring requires SharePoint 2010 or a Windows Live ID.

  • ISE Support IPV6 Dynamic ACLs

    Does ISE support IPv6 in its dynamic ACLs? We are a dual stack IPv6 site at present. We could leave the guest LAN on an IPv4 only site for the moment, but we intend to go forward and support IPv6 fully. If we wanted to apply DACLs to a port that had a Dual Stack arrangement, is that possible from ISE?

    ipv6 support for ise is not implemented yet (version 1.1.3 or 1.1.4)
    i thought it will arrive in version 1.2
    but as i am looking to improvements in version 1.2 Q&A i cannot see anything about ipv6
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html
    our customer has blocked ipv6 on wifi as we cannot put dynamically one ipv4 and ipv6 ACLs at the same time
    if someone as some "official news" about ipv6 ... would appreciate
    rgds,
    guillaume

  • Multihoming with CSS 11500?

    Can I do load balancing between two internet ISP's (multihoming), from Internet to Web Server (inside traffic) and from Internal network to Internet (outside traffic) with a Cisco CSS 11500?

    you can connect the CSS to multiple ISP.
    With the ECMP feature, the CSS will forward the response back to where the connection came from.
    However, for outgoing connection, the CSS can't do loadbalancing over multiple ISP.
    Regards,
    Gilles.

  • Load balancing PPTP (Windows 2003) behind CSS 11500

    I am wondering if you can load balance PPTP service (TCP port 1723 and GRE) behind CSS 11500, please let me know if anyone as experience with this setup.
    Irfan
    [email protected]

    No. I dont think you can load balance PPTP service behind CSS 11500.

  • Sorry Server for CSS 11500

    Hi,
    I have a question regarding sorry server configuration on the CSS 11500 series.
    Is there a way for the sorry server to ignore the URL path and always send the user traffic to the "root" page (e.g. index.html) of the sorry server web server?
    The problem I have is the redirection of the "root" page (url "/") that is configured for the normal traffic is causing the sorry page not to work since the URL path ("/psp/CUSTOMER1/?cmd=login") does not exist on the sorry page web server:
    service Sorry-Server
      protocol tcp
      port 8000
      keepalive type tcp
      ip address 192.168.2.254
      active
    service server1
      ip address 192.168.2.101
      protocol tcp
      keepalive type tcp
      port 8080
      active
    service server2
      ip address 192.168.2.102
      protocol tcp
      keepalive type tcp
      port 8080
      active
    owner Customer1
      content Content1
        vip address 192.168.1.101
        port 80
        protocol tcp
        url "/*"
        balance aca
        advanced-balance arrowpoint-cookie
        flow-timeout-multiplier 6
        add service server1
        add service server2
        primarySorryServer Sorry-Server
        active
      content Content1-Redirect
        redirect "/psp/CUSTOMER1/?cmd=login"
        vip address 192.168.1.101
        port 80
        protocol tcp
        url "/"
        active
    Thanks in advance for your help!
    Best regards,
    Harry

    Hi again,
    During a maintenance window I made the following change and that made things a bit better:
    service Sorry-Server
      type redirect
      keepalive type none
      redirect-string "192.168.2.254:8000"
      active
    However, since the redirect string points to a private address, Internet users are not able to access the URL.
    As a work-around I sent the redirect to a new content rule with a public address and then configured a second sorry page server:
    service Sorry-Server
      type redirect
      keepalive type none
      redirect-string "sorry.example.com:8000"
      active
    service Sorry-Server-2
      ip address 192.168.2.254
      protocol tcp
      port 8000
      keepalive type tcp
      active
    owner Customer1
      content Content2
        vip address x.x.x.x
        add service Sorry-Server-2
        port 8000
        protocol tcp
        active
    Is there a better way to do this?
    Best regards,
    Harry

  • HTML 5 and CSS 3 Support In Dreamweaver CS5

    I cannot find any information on this web site about whether and how Dreamweaver CS5 supports HTML 5 and CSS 3. There are lots of other fancy high-end whiz-bang technologies highlighted in CS5, but without support for HTML 5 and CSS 3, Adobe has left a great big hole in the middle of the new Dreamweaver. If I'm going to have to code these by hand, then there's little incentive for me to upgrade from CS4. Adobe may, by this oversight, intend to extend the useful life of Flash, but if this is so it's penny wise and pound foolish. There is much to like about Flash - and much to dislike about how it works on the user side. Leaving these problems unresolved hurts Flash, and leaving HTML 5 and CSS 3 support out of Dreamweaver hurts Dreamweaver. In other words, this is a lose-lose strategy.

    Hi Scott
    Sorry for the delay in replying, but I turn my internet connection off when working, otherwise I have found I tend to do more research than work.
    Media-Queries:
    I had viewed the video on the possible implementation of media-queries when it was first released, and in most respects the implementation is as I would expect, but it would be helpful if it was, (in a future development of the use) possible to show a list of 'common' smartphone/handheld devices, (makes/models) within the dreamweaver interface that would be usable with the screen size being used, (possibly as an import from the 'device central' device list as a drop-down list). My reason for asking for this feature is primarily as a time saving feature for the css layouts via media-queries as it would then show the targeted/usable devices in a list, and possibly alleviate the requirement of developing layouts that are not really required.
    Video:
    At the moment I am using the video feature as you have indicated where possible, and am doing so with the use of IECC's for IE as a fall-back for that browser. I have tried targeting versions if Firefox and Safari that support the video element by testing for it with JavaScript, but I have found this unreliable, possibly when the standard is finalized this may be the better method.
    SVG:
    I personally have decided to go with svg in preference to canvas. I have seen a few 'wow' factor demo's produced using canvas but as they use cross-compiled java to javascript code they are in reality showing nothing that has not been done before, (If we had 4Ghz processors with multi-core in 1999 similar trial graphics in vml would have worked just as good then, showing my age here!).
    My current work-flow with svg is - Inkscape - Modify the code by hand/preview in a browser - copy/past the code into dreamweaver.
    The current in-line implementation of svg's in the IE9 preview is where I see the main future of the svg implementations, as this makes using svg's for graphic elements and basic animations much more viable/easier for the average designer/developer, and lets not forget that as it is a vector it is ideal for resizeable background images in fluid/liquid layouts.
    I should say here, that I will for the foreseeable future use flash/swf's for more complex animations, as these are still much better quality than anything that can be achieved with svg or canvas.
    I would like to see the possibility of using Fireworks for the creation of svg's, and a work flow similar to that available between fireworks and dreamweaver at the moment.
    Cache manifest and database:
    As you have rightly grouped these two together, (and I cannot really envision a situation that they would not be used so) the situation with these is for me, (when trying to create the code for use) the necessity of 'remembering' what I must include in the cache and the transfer of the data for the database.
    Both are probably better explained with a typical scenario -
    A new research/development firm has developed the technology and parts to upgrade an autos internal combustion engine to an hydrogen powered engine. However the products list is specific to the motor manufacturers engine type, and to make matters worse the sales department also wishes an off-line version of the demos and parts list to be available to its sales team and customers, (o/k, maybe this is not a typical scenario, but it does demonstrate the usage).
    When developing the 'custom' html 5' enabled page I would require the cache manifest to include all necessary javascript/images/videos that would be required for the particular auto manufacturer to be available off-line, and compiling the list must be done at present by hand making it subject to possible errors.
    As for the database, (manufacturer specific) this must also be available off-line and updateable by the sales person and customer, as they are not always on-line and no hard-copys of material will be produced, (except when printed by the mechanic).
    My solution for me regarding the cache manifest would possibly be a dialogue in dreamweaver that would show all resources associated with the auto manufacturers model type used in the html site. I have used namespaces, (or some form of identifier) for general and model specific javascript, and a model identifying code for images and videos. The dialogue would then allow me to filter the resources required using the namespaces and identifier and include them in the list as required, possibly in much the same way that items are moved from a general list to a more specific list when creating the 'favourites' toolbar in dreamweaver.
    The database is on first appearance much simpler, as I would simply download the database using the motor_id as a filter, (yes Scott, you can see where I am going with this ) for those who cannot this would be wrong. You have correctly seen the problem with doing this, but I will explain for those who have not. The sales person and the customer would not see any of the images or videos that have references stored in the database, as these are just references and not the actual images/videos, yes one could use 'BLOB' for storing the items but this is not in my experience a reliable method. What is required is some form of method that would also download these items and place them into the required file position for off-line viewing, (which is what the cache manifest would do).
    So I would also require the possibility to add dynamically to the cache manifest from an sql database at the same time as the 'save for off-line' option is generated, (I have experimented with doing this in a similar manner that xml is created from an sql database).
    That's it for the html 5.
    Accessibility:
    For checking I use the firefox accessibility extension and total validator extension first, then the WAVE evaluation tool.
    But for Dreamweaver I would like to see the inclusion of the ARIA options as standard, especially when developing 'rich-internet-applications' particularly the aria-live and role options. I often find it interesting in discussions about html 5 where it is seen by many as a 'new' mark-up' language for the web, but rarely seen in the context of helping in accessibility when used correctly. Even the html 5 spec contains a section on using the new mark-up as part of accessibility and how the ARIA roles should be applied, (see - http://www.whatwg.org/specs/web-apps/current-work/multipage/content-models.html#annotation s-for-assistive-technology-products-%28aria%29).
    The inclusion of an extra live-view option in dreamweaver that render the page in 'screen reader' mode would also be a possible accessibility checking help. This could be done by simply turning off the background-images 'on-mass' and rendering any items as they would be seen by a screen reader. As most screen readers do now parse JavaScript and css, it would illustrate the problems of using such techniques as light-boxes without using the aria-live role to tell users that the light-box in now the focus of the page.
    For anyone who has stayed with this post, my sincere thanks, and any comments on the content would be welcome.
    Paula Z

Maybe you are looking for