Currency in 'Cost Centers: Actual/Plan/Variance' report for specific user

Hi there CO people, I'd like to ask about currency settings in CO S_ALR_87013611 report (Cost Centers: Actual/Plan/Variance)
The question is ... where can I define the currency in which report output should be displayed?
I've got such situation, that amounts for USER_X are displayed in CURR_X currency, whilst for USER_Y amounts in report are displayed in CURR_Y currency.
Could You tell me some tip? Or give some literature-track to follw? I'd be thankful for help. Greetings. P.

USER_X -> TCode: RPC0 -> Tab: Report currency -> Tick 'Objeck currency' (Before was: 'Controlling area currency')
now USER_X has got the same currency as USER_Y
That solved my problem
Greetings

Similar Messages

  • S_ALR_87013611:  Cost Centers: Actual/Plan/Variance

    Hello everyone,
    I am needing some help in understanding the Cost Centers: Actual/Plan/Variance report S_ALR_87013611.  I understand the basic concept, but I am having trouble figuring out how it comes up with its numbers in the "Total Value in Report Currency" field.
    When I go into the report, a list of cost center groups pop-up on the left-hand side of the screen.  So, I select cost center group 200, then the right-hand side of the screen pulls up  a list of the cost elements and their actual VS planned numbers.  When I scroll down to the bottom of the screen I see a section for "Activity Types", so I double click on activity type A200 "ST Personnel Run Hours" and then I select "Cost Centers: Actual Line items" report.  This is where I am seeing the "Total Value in Report Currency" field that I can not figure out how it is calculating.  The column header for this actually reads "Val.in rep. cur.", I have went into F1 for the help information and it, unfortunately, does not help me what so ever.
    Also, where does it come up with the "Total Quantity"  on the same report?
    I would appreciate any insight into the report. 
    Thanks in advance for all of you help,
    Rhonda

    Hello Madhu,
    I am not seeing a different currency, I just do not understand how it comes up with the result in that column?  Where does it pull the amount from exactly?
    The hr quantity shows .250 hrs and the value in rep.cur. shows 6.06.  Where does the 6.06 come from?
    Any help in understanding this would be greatly appreciated.
    Thank you,
    Rhonda

  • How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

    Hi,
    How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
    Regards
    Anil Kumar

    Hello there Anil,
    A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
    maybe 60 days to so, watch the DB size).
    To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
    In your search scope you can use the following XPath to play with.
    - All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
    - All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
    You can play with the "RequestStatus".
    Hope this helps.
    Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
    faster.]

  • S_ALR_87013611 - Cost center: Actual/Plan/Variance selection report - outpu

    Hello all,
    when running the report,it can be seen in SAP screen by cost groups and by cost elements.
    The problem is that when user tries to save report in local file, then it is not able to see cost center distribution. User can only see cost elements amounts.
    is there a way we can save on a local file cost groups as well?
    Thanks in advance for letting me know
    regards
    Hana

    Hi,
    Look for data source 0CO_OM_CCA_1 ( Cost Centers: Costs and Allocations ) ..it will give you the plan / actual /commitment amounts & qty.
    Link is http://help.sap.com/saphelp_nw04/helpdata/en/8d/1f383fe58d5900e10000000a114084/frameset.htm
    Hope that helps.
    Regards
    Mr Kapadia

  • SimpleSearch can only retrieve documents(reports) for enterprise users!!

    Good Day Everybody,
    i'm using SimpleSearch to retrieve all reports for specific users, the problem is that i'm only able to retirve reports for enterprise users and i can not get reports for domain users, anybody knows why?? or there is another way to do so??
    GetDocumentList is working fine but it's only retirves reports for the loged in user only....
    also i would like to extacrt all useres which has permession to reports, so would you please give me a hand of help and send me how to do!!!
    kindly find below the code i'm using to retrieve all reports for specific users:
    //After creating connection, seesion and login using administrator enterprise user
            SimpleSearch mySearch = new SimpleSearch();
            mySearch.InAuthor = txtUsername.Text;//.Trim();
            //mySearch.InName = "";
            mySearch.BeginDate = System.DateTime.Now.AddYears(-2);
            mySearch.BeginDateSpecified = true;
            mySearch.ObjectType = "documents";// "documents";
            BusinessObjects.DSWS.BICatalog.SortType[] mySort = new BusinessObjects.DSWS.BICatalog.SortType[1];
            mySort[0] = BusinessObjects.DSWS.BICatalog.SortType.NAMEASC;
            BICatalogObject[] searchResults= null ;
            searchResults = boCatalog.Search(mySearch, mySort, null, null, InstanceRetrievalType.WITHOUTINSTANCE);
            if (searchResults != null)
                foreach (BICatalogObject myBOCatObject in searchResults)
                    Response.Write(myBOCatObject.Name + "----" + myBOCatObject.UID + "" + myBOCatObject.CreationDate + "--" +"<BR>");
            else
                Response.Write("no documents");

    Which version  are you using?
    BICatalog is pretty limited, and has been deprecated for more recent versions.
    Sincerely,
    Ted Ueda

  • Variance report for planned vs actual 261

    Hi Experts,
    Is there a variance report for planned v/s actual raw material consumption for an order when the order is still running? I mean when only the partial quantities are confirmed (PCNF, PDLV)?
    Regards,
    Sachin

    Hi,
    Always the plannig is done for ordered quantity and the actual quantity is what actually used.
    Pl. use T code CO02/CO03 - Goto - Cost Analysysis, you will get the details which you are looking for. If the layout doesn't suits your requirement, change layout with change options.
    Madhava

  • Issue with report (S_ALR_87013611) that is actual/plan line items for Cost

    Hi Gurus,
    I am having issue with the report (S_ALR_87013611) that is actual/plan line items for Cost Center.
    When i execute the report for a cost element  510200 the amount is 23,380.13, but when i drill down on it by double click on that amount the value in obj curr is 15468.91. Hence there is the differnce. When i futher drill down by double click on the amont of 15468.91 and i go to display group currency and take the total it is 23380.13 and display in local / doc currency the amount is 15468.91. I guess due to this there is difference. The cost center & the cost elements are the same i have checket it.
    My concerns is that the group curr is USD and obj curr / local curr is USD. So is group curr and doc curr is USD then when i click on dislay curr and select group curr why the amounts are changing.
    Kindly adivce

    Try to look if there is any filtering criteria applied in the report to which you drill-down.
    The difference can be also caused by the "value type" - some reports show actual and statistical costs together in one column while the others strictly show (are defined to show) only e.g. actual costs (type 04) and not the statistical costs (type 11)

  • Actual vs target report for sd module

    if any having actual vs target report for sd module pls forward me..
    my requirement is i would like to find the monthwise core and monthwise actual sales totals and rebate for the particular product ..

    How are you doing the data entry for target (or budget) ? Is it thru CO module ? Have you activated CO-PA ?

  • How to Block Account member in input reporting for some users?

    Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
    I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
    I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
    For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
    I hope understand the question, im sorry about my english
    thank you in advance
    Ignacio Vazquez

    I would think you could do one of the following:
    Either set account as a secured dimension.  You would then define security profiles for all account groups and assign those to your users / teams as appropriate.  Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
    Setup different input templates that only showed the accounts you wanted each group of users to see.  Put the templates in different site folders and assign access to those sites as required.  users would then only have access to open the template applicable to them.  Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
    Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts.  I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc.  You then distribute the passwords to the users as appropriate.
    Hope that helps.

  • BI 7.0 version report  for  anonymous user

    Dear Gurus,
    Greetings for the day!
    I want to display the BEX BI 7.0 version  report on Portal 7.0 for anonymous user. But I am not able to do the same. Can somebody please help me to achieve my task. Thanks.
    Regards,
    P.Swarna

    HI,
    Thanks for your reply,
    Its already configured and the reports working perfectly with login user ids( like end user).But when we assign same report
    to anonymous user with authentication scheme = anonymous in iview properties still its redirecting to logon page.
    Please suggest how to configure BI 7.0 report for anonymous users.
    Regards,
    P.Swarna

  • How to set different default interactive reports for different user groups?

    I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
    For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
    Thanks

    You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

  • Report Painter GRR1 table CCSS cost centers actual/bud by period wise

    Hi,
    I have developed Cost Center Actual/Budget Report by period for 12 months (Jan to Dec in columns) in each columan I have hardcoded period e.g. for Jan (01) Feb (02) till Dec (12-12) for one of coulmns given as variable From Period to To Period as vairbale to choose user in selection criteria (1PERIV-1PERIB). while executivng the report system is givng results for whole (12)periods in the output, even my selection criteria from period 1 to 3.
    Please advise any body how can I restrict by period wise.. e.g. if I select from period 1-3 it should show for only 3perios.
    Thanks in advance!!
    VS Rao

    Hi Kumar,
    I have done below steps to my CC Report to show by period wise(individual columns Jan, Feb, so..on) cost center report:
    Step 1: used Library 1VK, Table CCSS in GRR1.
    Step 2: Created 12 individuals columns starting from Jan to Dec..
    Step 3: Created 12 formula variables(internal Variables) for 12 periods..(becoz if I hardcoded system is deriving all the  
                 periods)..
               a) created Internal value Variable ZVAR(defaualt 01),ZAR1(default 02),ZAR2 (default 03)...this is for to create fomula
                   variables.
               b) for period 1(jan) formula variable  "IF '&ZVAR'>= 1 THEN 1 ELSE 017" internal variable table:CCSS,field:PERBL
               c) for period 2(feb) IF '&ZVA1'>= 2 THEN 2 ELSE 017 like wise created 12 variables for 12 periods
    Step 4: above the formula variables I have selected check box as variable but not coming on selection screen, I need in
                selection screen from period to period for this I have created one more hide column and given period vairable "1PERIK"
               now its coming on the selection screen but values are not populating based on by selection criteria..
    Note: If I slect 1-4 periods it should show for only Jan,Feb, Mar & April  and individually..
    Please sugget above my formula is correct or not!!  appreciate your valuable suggesion!
    Thanks
    VS Rao

  • Actual line items report for multiple products

    Hi All,
    We have 4 manufacturing plants and 100 fg /sfg materials are being amnufactured for each of the plants.
    Now we want to see the total actual cost incurred report for each of the fg/sfg  materials for each plant in a single report.
    Kindly share the report t. code in product costing.
    Regards
    Subbu

    Hi,
    Without ML/Actual costing, Actual cost per Product is not easy/possible! Otherwise, you could only attempt to get a cost close to Actual cost, as far as possible.
    Hope this helps.

  • How to get the Price variance report for PO's?

    Hi all,
    Please help me by giving the exact T Code which gives the price variance for the PO's,which must be
    showing the difference between the GR value and the price(std.price) maintained in the material master.
    Waiting for your suggestions.
    Regards
    Mangalraj.S

    Hi,
    Take an easy way, you can go to the PO with t-code ME23N, at tab page PO history of the item detail, you can find the price variance for the item.
    Or you can use t-code MB5S to display the multi-POs' price variance report!
    Cheers
    Tao

  • Designing the consolidated and line item report for specific material

    Hi
    i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
    Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost)  ) in one report.
    Another report will give same for consolidated values of financial loss, utiliy consumption.
    <b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
    kumar

    0VENDOR_ATTR - Vendor Master Data Attributes
    0FI_AP_51 - Check Register Line Items
    0FI_AP_4 - Accounts Payable Line Items
    It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

Maybe you are looking for