Current Exng rate not picked SD invoice posting in PROD,it is picked in DEV

Dear All,
We are facing a peculiar problem for sales invoice accounting entries. The problem is related to currency exchange rate. We have created a sales order with some earlier pricing date (01.12.2010).The USD to INR exchange rate is mentioned 47.23% in OB08.The sales order is copying the rate of 47.23% as the pricing date is 01.12.2010. Now we have created a sales invoice in VF01. Now if we see the exchange rate in billing document it is 47.23% as it copies from the sales order.
Now we have maintained Currency exchange rate in OB08 for date 16.07.2011 as 44.22%. After that we posted the sales invoice and the accounting document we found that system is picking the exchange rate based on billing date (the Bline Date) the current one i.e. 44.22%.
This is exactly we want and the test is successful in DEV and QAS server.
The entire process is repeated in the Production server but the result is not successful. The system is not fetching the exchange rate based on Bline date. It is based on the old pricing date exchange rate (47.23%).
How to solve this issue as there is no configuration mismatch between DEV and PRD.

Please check the Note -> 1481238

Similar Messages

Accounting exchange rate not picking while running result analysisKKA2

Hi All,
WHile running Result analysis with KKA2 the accounting exchange rate not picking correctly.
When we run the KKA2 from may to sep it is taking may month as default rate and it is extending to june aug,sep instead of seperate exchange rates for each month.
We compared all configurations for this RA key with existed RA key .All the setting are one and the same.in OKG2,OKG3,OKG4,OKG5
PLease help ...
Regards,
Mohan

Hi srikanth,
It is not daily exchange rate.
Actually we copied PS LCR RA key to PS IAS.
PS LCR is working fine and it is picking correctly for the respective months.
Where as In PS IAS it is taking starting month and same continuing for other consecutive months.
Regards,
Mohan

FM exchange rate differences during the invoice posting

Hello Experts,
We are working in a public project and we are facing the following:
Due to the exchange rate an invoice is bigger in local amount (EUR) than the PO. In other project, we were moving that difference to another P&L account out of budget. However, here in this project, due to the legal requirements all amount of the budget has to consume budget. Could you help me to resolve this isssue please?
Thanks in advance.
Regards.
Ahmed.

Hi,
Then you need to change the exchange rate based on your LIV posting date.
Check in OB08 with exchange rate type "M" , as when ever the difference in PO and Invoice you need to ask the finance team to change exchange rate as per date on which you receive the Invoice so the posting is done as per the vendor invoice exchange rate.
Do refer the below KBA which explains you in detail how the exchange rate works during MIRO.
KBA: 1700942 - Exchange rate cannot be changed as changing the posting date during logistics invoice verification

VAT Rate is copied from Base Document, not taken from Invoice Posting Date

Hi,
With the recent VAT Rate change in the UK, the following issue has come to light.
If I have a sales order or delivery created in November 2008 the VAT rate is 17.5%, which is correct.
If I then invoice that document in December 2008, the VAT rate should be 15% in line with the VAT Setup screens.
However, the VAT rate on the new document remains at 17.5% even if the user changes the posting date. The VAT Rate is only corrected if the user changes the VAT rate on the transaction line to a completely seperate rate, and then back again.
For documents with many lines this is impractical. I have several customers who have complained about this who want reassurance that the issue will be resolved before the next VAT rate change in 12 months.
Regards

Please check the Note -> 1481238

G/L a/c not dispalying in invoice posting (MIRO)

Hai Guru's
while posting invoice in MIGO, gl a/c not showing. For this any configaration needed. i want to show gl a/c also.
Regards
valluri

The G/L account will automatically displayed in MIGO, account assignemnet tab, if you do configuration setting in OBYC.
ramesh B

Workflow not starting for invoice posting through MIRO...

Hi,
I have a blocked invoice workflow in Release status. The business object BUS2081 is used and POSTED event is activated in the workflow.
Hello Gurus,
Now when I try to post invoice through MIRO, the workflow does not start. I go to top called service for object icon and click on Workflow, but I cannot see the workflow started.
Please help.
Regards,
Rajesh.

Hi
This was already discussed. Check in SWEL Tcode whether the Posted Event is getting triggered or not. If not then find out whether this event gets triggered automatically or through Coding. If thru coding check ur code. If thru config check ur config.
Please close thread when this gets resolved

Tax rate not picking up

Hi Gurus
In my pricing procedure the tax access sequence contains two access ,one with combination of country/region/region delivering plant/tax classification customer/matrial which is the specific one and second acess which is general one at the bottom with combination country/tax classifcation customer/material tax classification.Althought condition record is maintained in both the acess of the condition table ,the system picks up only the value of second access i.e country/custtax classification/material tax classification.
So please provide me with solution to rectify this error

Hi,
In Sale Order conditions Tab click on the analysis button.
Check the message for the tax condtion type ,whether it is
1. Access not made or
2. Condition record not found.
Based on th analysis proceed.
If condition record is not found then check customer and material master data whether proper tax indicators are maintained and validity dates.
If access is not made then some requirements are not fulfilled. then check whether plant is determined in the sale order etc.,
Hope this helps.
Regards,
Sharan

Po is not picking up current exchange rate

hi,
in our import po system is not picking up current updated exchange rate.do u have any idea where the problem may be.
from where does import po picks up exchange rate?
thanks

hi
plz check that u have given proper entry in OB08
also check that u have not tick for exchange rate fixed in PO header
hope u havent changed any standard configuration so check spro>log gen>tax goods mov>india>basic set> co code settings
here u have maintained exch rate type as M
regards
kunal

Exchange Rate date for Invoice posting for Slovak Republic

Hi,
We have a requirement wherein for Slovak Republic, Invoice should pick up ( at the time of Invoice Posting) the exchange rate from the Delivery Note date and not the Invoice Posting Date. This is applicable for all vendors which have a Slovak Republic VAT Registration number. I suppose this is some country specific requirement for Slovak Reublic.
Do we have to apply some Notes to achieve this functionality. Any pointers to this issue is highly appreciated.
Regards
Anupam

SO VBRK-KURRF (exchange rate for FI) is taken from "pricing date" in standard?
Are you 100% sure? :
FIrst of all: there is no pricing date (PRSDT) on invoice header level
Second: I`ve got information from FI that VBRK-KURRF is taken from posting (billing date) VBRK-FKDAT
I have found also programs, there is provided folloving calculation formula:
LV60AA90
Currency conversion (WAVWR is in local currency so far)
        ACTDATE = VBRK-KURRF_DAT.
        IF ACTDATE IS INITIAL.
          ACTDATE = VBRP-PRSDT.
        ENDIF.
        DA_WAVWR_HW = VBRP-WAVWR.
        DA_WAVWR_KW00 = WAVWR_KW00.
        DA_WAVWR_PCVP = WAVWR_PCVP.
LV60A036
Determine date
    IF vbrk-kurrf_dat IS INITIAL.
      ld_kurrf_dat = vbrk-fkdat.
    ELSE.
      ld_kurrf_dat = vbrk-kurrf_dat.
    endif.
So what is the verdict?

Outbound delivery date in June and customer invoice post in July,tax rate?

Hi Experts
tax rate (June)=22%
tax rate (july)=24%
issue is Outbound delivery date in June and customer invoice post in July,so sytem taking tax rate =24% instead of 22%.Because outbound delivery is happened in June.
Please let me know that,
1)how system picking tax rate on base like billing date or service render date or ...?
2)how to take tax rate (june)=22% in July posting.
regards
sachin

Tax Rate is picked based on the pricing date.
You need to check with your SD collegue to configure the pricing date to be equal to outbound delivery date to pick the outbound delivery date based tax rates.
Regards,
Gaurav

Invoice is not picked for payment

Hello SAP guru's
I am facing a strange issue with Invoice for payment.
Here, Invoice had been paid and later check was voided and move to open payables but later It's not picked for the payment run after i change the payment terms to Immediatley.
what could be the cause for this? any idea will be appreciated with good reward points.
rgds,

Thanks for reply.
This Invoice is in open payables as i said.
Due date : 08/26/2007, payment terms : PT00 ( pay immediatley).
Other invoices posted after this document to this vendor are posted and paid without any issue.
I am not sure how to check the payment run to consider this invoce for payment though all above parameters allow for payment immediatley.
rgds,

Tax Rate is not picking in SD flow

Hi,
I have maintained the Tax code and Tax Jurisdiction Code in FTXP.But the system is not picking the Tax Rates in Sales Order
What could be the reason for this.Kindly help me in fix this issue. I am getting the below error while releasing the Billing document in VF02.
Why it is giving the below error even though i have maintained FTXP tax rates in with Tax code and Tax jurisdiction code
Tax code in procedure TAXUSJ is invalid
Message no. FICORE704
Diagnosis
The tax code entered is not defined in the country for this company code.
System response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax determination procedure is assigned to the relevant country. the Procedure field is in the detail screen.
2. Create a new tax code if required.
Thanks
SAP GURU

ASSIGN TAX CODES FOR NON TAXABLE TRANSACTIONS
PATH: SPRO  FINANCIAL ACCTG  FINANCIAL ACCTG GLOBAL      SETTINGS  TAX ON SALES/PURCHASE  POSTING  ASSIGN      TAX CODES FOR NON TAXABLE TRANSACTIONS
TRANSACTION CODE     -     OBCL
SELECT POSITION BUTTON
GIVE YOUR COMPANY CODE          -     GES
PRESS ENTER
COMPANY CODE          -     GES
ASSIGN INPUT TAX      -     V0
     OUT PUT TAX     -     A0
 SAVE & SAVE IN YOUR REQUEST

Exchg rate from new exch type X is not picked up in Treasury transactions

Dear All,
I am maintaining a new exchange rate type for treasury transactions called "x". I have made all the settings required for this. Following is the series of steps configured to pick up the exchange rate maintained for type "x" for a Interest rate instrument foreign currency transaction.
*Genaral Settings*
1) Define exchange Rate(E Rt) type 'X'.
2) Define translation ratios for curr translation
     X     usd     inr     1:1
     X     inr     usd     1:1
3) Define new doc type "ZF" with exch rate type "X"
4) Define Exch rate calculation indicator
     02     X     X
*Treasury settings*
5) Define company code additional data
     Rate Calculated     02
     Rate type(Debit)     X
     Rate type(crdit)     X
6) Assignment of valuation areas to accounting codes
     ER type      X
7) Define account determination
Doctype "ZF" assigned to the relevant posting specs
Document Splitting
8) Classify doc types for doc splitting
     ZF     0000     0001
9) Exch Rate of "X"
X     01.01.2006     usd     47.36     inr
after maintaining all these details I am trying to post an FC transactio using tcode TBB1. Everything is fine no errors nothing I can post the document also but THE EXCHANGE RATE MAINTAINED FOR TYPE X IS NOT PICKED INSTEAD RATE FOR TYPE M IS PICKED UP".
please advise if i missed something. I am not able to trace why the SAP is picking rate from type M when I made settings to pick the rate from type X.
Rgds
Komal

Hi
Generally for posting FI documents (which is what this T Code does) , M alone is used which is the standard SAP system functionality. For other purposes like valuation, translation, etc. we can have different exchange rate types.
Jayaram

FI invoices not picking up Terms of Payment

Hi,
We have FI invoices (Posted through FB60) for freight charges. These invoices hit frieght expense account instead of being posted against a PO.
The problem is that when these invoices are posted, they are due immediately. We checked the payment terms of vendor and the terms of payment should not make the invoice due for payment immediately, instead due after 30 days.
Hence, the problem is that the correct terms of payment are not being picked up by that invoice doc type. Can you please suggest a solution, as to what could be wrong or where to look.
Thank you.

The thing is that this vendor is not a regular vendor. Its a pay to vendor created without a regular (parent) vendor. Hence, I cannot look this vendor up in the Xk03 tcode. I checked the payment terms in table LFb1. There the payment terms say 30 days due.
Additionally I checked payment transactions view in XK03 for another vendor and did not find any field named payment terms. Not sure if its even there. Did you mean to check the payment terms in the purchasing view instead?
We are using Retail system, so maybe its different here. I doubt it, but just a thought.
So to summarize basically, there is no FI payment terms, we use only regular payment terms from vendor and I checked those in LFB1. They do not say due immediately. Secondly, the vendor is a invoicing party (created without a regular vendor). When invoices post, they hit a freight expense account directly.
Any advice?

Foreign Currency Payments are not Picking up Exchnage Rates

Hi,
We are on R12.0.6 and while entering foreign currency payments the system is not picking up the exchange rate. It is only allowing us to enter USER exchange rate. The field of exchange rate on Payment form is greyed out and not showing anything.
We have checked the rates and these are present in system. The same rates are picked up by invoice entry screens but for payments it gives us no exchange rate found.
Has anyone faced this problem.

Well, it seems that the "Exchange Rate" field on the Payment form populates when the user selects the Bank Account before the Payment Date field. Previously we were entering the information first in the Payment Date field and than selecting the Bank Account. This was preventing the Exchange Rate field from being populated with the rate.
I just changed the order of the entry and it worked perfectly. Now first we select the bank from which payment is going to take take place and than the date, and the exchange rate is automatically picked up from the rates table.

Current Exng rate not picked SD invoice posting in PROD,it is picked in DEV

Similar Messages

Maybe you are looking for