Custom alert for ASA Secondary Status

Hello All.
Here is our dilemma.
We need a custom alert.  Something that will trigger an alert if our secondary ASA goes to a "Secondary - Failed" state.
If  the primary is active and secondary is in a failed state, we may never  know until traffic tries to fail to the secondary and is
unable to do so because it is in a bad state.
We  are not looking to see if the secondary firewall goes down nor if it  becomes the primary from a failure of the primary, but if
anything changes the secondary status.
To put another way, if the line from "show standby" shows "Secondary - Failed"
we need to know about it because it means redundancy is broken.
We need to know if this line changes from this status:
Other host: Secondary - Standby Ready
I believe there is a monitor in Orion for the load balancers called something like "not
standby hot" designed for the same thing.  Basically we need the same type of
monitor for the firewalls.
Any ideas on how to go about making this happen????
All of the posts I have discovered relating to this topic only cover alerts/notifications on whether a pair of devices go from
active to standby and vice versa.
Is this even possible with the OID's on the ASA's?
cfwHardwareInformation
cfwHardwareStatusValue
cfwHardwareStatusDetail
cfwBufferStatInformation
Posts we've already covered:
http://thwack.solarwinds.com/message/132423#132423
http://thwack.solarwinds.com/message/29931#29931
http://thwack.solarwinds.com/message/85319#85319
http://thwack.solarwinds.com/docs/DOC-170819
http://thwack.solarwinds.com/message/171653#171653
http://thwack.solarwinds.com/docs/DOC-118692
http://thwack.solarwinds.com/message/29931#29931
https://supportforums.cisco.com/docs/DOC-1295
http://thwack.solarwinds.com/message/71089#71089
Thank you in advance,
Todd

Hi,
One option is to use standard AuditTrail functionality on that field, then you'll have the entire chronological history for the field to work the periodic alert logic from.
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Similar Messages

  • Creating customer alerts for BP

    Hi all,
    I would be very happy if someone could me.
    We want to create an alert for open activity for BP in the ICWebGui.
    For that, we customized the alerts and policy rule so that it will call our own Z class. (accoring to the OSS).
    But we dont know what to implement in that class. The class inherites from CL_CRM_IC_F_G_TRANS. Can someone explane the execute method and the purpose of the class and what else should be done.
    Can anyone give an step by step alert implementation via CRM2007?
    Thanks alot.

    Hi,
    You can get number of threads in SDN search.
    Check in the following blog
    IF_EX_RSR_OLAP_BADI~DEFINE
    https://forums.sdn.sap.com/click.jspa?searchID=23657256&messageID=6776739
    https://forums.sdn.sap.com/click.jspa?searchID=23657256&messageID=6788064
    http://sapbikk.blogspot.com/2008/05/writing-virtual-characteristics-or-key.html
    Thanks
    Reddy

  • Custom alert for ical

    The old method doesn't seem to work.
    How do I create a custom alert sound for ical on my mac????

    Hi,
    Depending from your Role, for Exmample IC Manager:
    -> Process Modeling
    First Step for Creating the Alert:
    -> Create Alert
    -> New
    Second Step:
    -> Create Rule Polici
    There you define the Conditions and the Actions
    so the Alert is coming up the IC. You can test it and have to release it.
    Read C78 CRM Interaction Center Building Block Configuration Guide;
    there you will find an easy example an Page 59.
    Andreas

  • Custom alerts for different mail accounts?

    Is there a way to set up different ringtones/alerts for different Mail accounts?  I'd like to make my personal and business emails ring/vibe differently.
    Thanks.

    Nope, as you look in your settings mail only has one option to change the sound and thats for any mail that is recieved.

  • Custom report for Workflow approval status

    Hi Friends,
    For one of my custom workflow the client needs a custom report to know the approval status. This custom workflow will be a multilevel approval and they want to know the status based on the object key(document number) like who has approved it at what time, who else has to approve etc which standard workflow tables can be used for this? Please advice.

    >
    sapient wrote:
    > Solved as per Arghdip,Martin and Mike's Suggestions.
    Thanks for the update, but how is this possible if two of them are completely different solutions? 
    This is a tecnical forum, accuracy is key. The word "and" doesn't really work in the above statement.

  • How do I create a Calendar custom repeat or custom alert other than the choices given?

    I would like to create a custom repeat for my calendar such as every 6 weeks or, every other month or whatever choice - - the only choices are "Every Day, Every week, every 2 weeks, every month, every year"?    I would also like to create a custom alert for 2 weeks before or 10 days, etc and there is no "custom" option???

    Whenever you find out let me know. I wanted to assign a text tone to someone and now in iOS 7 i can't. Or I haven't figured this out yet.

  • Doing a goods receipt for a customer material that is ASEQ status

    We are needing to find a way to be able to do a goods receipt for a child part in ASEQ status.  Most of our customers will send in their part after disassembling it themselves.  Since we can not receive the part our present process is to dismantle so the system status changes to ESTO and we can receive.  The problem with this is that the end user forgets to assemble the part back and we end up breaking the linkage.
    We have looked into using User Status in the equipment master and have configured that.  However the user status button, nor name shows up in the equipment master.  I have looked at the field selection in IMG and it is not hidden.  I am assuming it is being supressed by a user exit we have.
    Can anyone give me any suggestions on how we can improve the process using SAP for material that is ASEQ status and being able to create an inbound delivery so we can receive in our warehouse for this status without dismatling the unit? 
    We are on ECC

    Hello Kimberly
    You lost me while describing your current process, so  please provide more details as to how you dismantle and reinstall etc.  Also how the part goes back to the customer.
    However I can provide you  clarifications to some questions you raised..
    You see both system and user statuses in the field 'Status' itself. This is the 3rd row in the Equipment display screen under Equipment number and Description. If you see carefully you will see 2 sections, the one on left is system status and the one on right is User status. If you click on the i (info) icon, you will be taken to a screen where you see more info like status and business processes etc.
    ASEQ is a system status and it is determined by what you did ( example dismantling) and can't be changed by you (user). If you see the 'Business Processes' tab, you will also see the this won't allow assignment to a Delivery and so on. So my point is having a user status will not help you. Based on the combination of system and user statuses, some processes are permitted, some not. For example if Goods Receipts are allowed, may be you can receive without an Inbound delivery.  I am mentioning this as a thought initiator, I know you will have a Return/Repair order process including a return delivery.
    I guess you have to systematically prevent the user from  doing whatever they are doing out of turn, e.g., forgetting to reassemble (install?) and for this User statuses can help.
    Let us know your process more in detail and I am sure SAP will have a standard way to receive a child part of a big assembly. Other members will share their practices also.
    Take care.

  • Curve 9360 custom sound alerts for messages will not work. Tried EVERYTHING.

    I have a brand spanking new BlackBerry Curve 9360 that just arrived yesterday.  It is great apart from this very frustrating small prob.  I can not customise my message alerts for individual people in my address book.  When I click on "try it" only the LED button flashes and there is no sound or vibration.  I am trying to get the sound and vibrate to play as "active profile" but it just won't.  I can override it and have custom volume and vibrate that plays no matter what the profile but as I sometimes like to set my main profile to vibrate or silent, it won't do.
    So far, to fix it, I have tried:
    Wiping profile and sounds from the blackberry software
    Full factory reset
    Creating my own profile and using that instead of "normal" or any of the other preset ones
    Loads of battery pulls before and/or after any changes
    I have also had a few different people text me to make sure the problem isn't just the "try it" feature.  It isn't.  The sound that plays is always the default message sound for whatever the default profile is.
    If anyone can help it would be greatly appreciated
    Deb

    I have also experienced exactly the same problem.
    The profile is set on normal, with the ringer volume on 10, the ring tone has been selected, and I have also selected the option of the vibrator along with the ring tone.
    Now here is the problem, initially it rings and works perfectly, however it seems to automatically turn off the volume so the LED light keeps flashing, however there is not ring tone or vibration.
    If you select the "normal" profile or any other profile and change the ring tone or the volume, and click on the try it icon at the bottom, it still only flashes the LED, with no sound.
    Have tried everything that you have mentioned in your email, however still unable to rectify the issue. the only way to rectify is it to hard stop the BB, by pulling out the battery and restarting the Blackberry.
    Can anyone help or suggest what needs to be done ?

  • SQL query for custom alert view

    I have created a custom alert view and scoped to show alerts related to group of servers.
    Alert view Criteria: Resolution State - New, Severity - Warning and Critical, Group - "Group 1"
    I am trying to query the Operations Manager database to show the alerts with same criteria using below query.
    select MonitoringObjectName, ResolutionState, Priority, Severity, TimeRaised, TimeAdded, TimeResolved, AlertStringName, AlertStringDescription from AlertView where ResolutionState = '0' AND (Severity = '2' or Severity = '1')
    AND
    MonitoringObjectId IN (select TargetObjectId from RelationshipGenericView
    where SourceObjectDisplayName = 'Group 1')
    in Console i see both warning and critical alerts where as in SQL query output i see only critical alerts.  Could you please correct if I am using wrong query. also please share your suggessions if i am completely wrong on this.
    Kind Regards,
    Bommi
    ~Bommi

    your query looks perfectly fine. Are you sure if the alerts you see in the console are of the 'Resolution State =0' (New). It might be the case where the alert have moved to a fidderent resolution state.
    Also, take a sample warming alert from console, query for the same in DB and check the Severity value. If it is '2'.
    Regards,
    Saravanan

  • Collection Alerting for Endpoint Protection and Client Status

    both for the Client Status alerts and for the Endpoint Protection alerts I have set these up on one collection each,
    the thing is if you go to the Client Status node under monitoring, by default the collection 'All desktop and server clients' is selected, while this one doesn't even have the alert configured
    same goes for endpoint protection, where by default the collection 'All client Systems' is selected ...
    what is the purpose of configuring a specific collection for the alerting, if you have to select this every time you look at the monitoring?
    try to explain that to customers..

    The purpose of configuring alerts for different Collections is that you can have e-mails send to different Groups. When you create subscriptions you can select the different alerts and configure them to mailed to different Groups.
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • Alert for XI messages in a Holding status

    Is there a way to trigger an alert in XI 3.0 sp20 for messages that are in a holding status. Right now I am manually checking using the RWB but I would like to trigger an alert if messages are holding for an extended period of time. I have setup Email alerts for messages that have an error status but I can't seem to find out how to setup for messages that are holding.

    You can either configure CCMS alerts or using ALRTCATDEF. YOu can refer to the below links.
    CCMS:
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
    Michal's blog-ALRTCATDEF:
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    Other help:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8fe69590-0201-0010-8097-c8a2ca60d5df
    Venkat.

  • Custom ALERT TONE for iphone need HELP please.

    I understand how to create a custom TONE as an M4R file and import into itunes into the TONES library.
    When i sync my TONES to my iPhone, it lists as a RING tone.
    My custom ring tones, which are approximately 10 sec long work just fine when set as my RING tone for incoming calls.
    HOWEVER ....
    What i am DESPERATELY trying to do is create a custom ALERT tone and have it LIST as an ALERT tone in my phone and NOT a ring tone. Seems custom tones do not work for sms alerts.
    I searched EVERYWHERE and can not seem to find an answer. I realize apple wants us all to BUY alert tones, but i should be able to create my own too no?
    I created some custom alert tones, approximately 1 sec long each. Converted them to M4R files and sync'd them to my phone.
    In my phone they appear under the RING TONES list and not ALERT TONES.
    Maybe this dosent matter, however, when i try to set my TEXT ALERT SOUND to one of my custom ALERT tones, they do NOT work. My text messages come in without playing the sound.
    Can ANYONE PLEASE HELP ME figure out how to properly create a TONE as an ALERT TONE for my iphone?
    HUGE THANKS to ANYONE that can help.

    I've never been able to assign custom tones under alerts.  It doesn't matter though as you can assign ringtones as alerts as of iOS 5 I believe.  I had a similar issue with silent alerts, sometimes they would play, other times theywouldn't, but they would always play when selecting them under settings.  Resetting all settings (not content) has so far fixed that issue for me.  Try resetting your settings after you've synced your tones.

  • New namespace for custom alert types

    Just fyi, so far, when creating custom alert types and generating the necessary DB tables containing alert data, the tables could only be assigned to standard SAP packages due to name space checks running at table generation. However, it is desireable to generate the tables of customer-relevant alert types into customer packages. A note was created to make this possible. If you create custom alert types, please check OSS Note 1519907 for further information.

    your query looks perfectly fine. Are you sure if the alerts you see in the console are of the 'Resolution State =0' (New). It might be the case where the alert have moved to a fidderent resolution state.
    Also, take a sample warming alert from console, query for the same in DB and check the Severity value. If it is '2'.
    Regards,
    Saravanan

  • SALERT_CREATE -custom alert creation for validation

    Hi,
    I have done one scenario,in which i have used the custom alert creation calling the SALERT_CREATE function module from my udf.That is doing fine but now i have an understanding problem that, in the udf we need to use one RFC receiver comm channel,what is the use of that.As the function module we access is already present in PI server itself.
    In case of RFC lookup when we access RFCs from remote server there we need one RFC receiver comm channel..that is valid but why in this case.
    Can anyone please clarify me.
    Cheers,
    Abhishek.

    Solved itself.

  • Alerts for Leads

    Hello,
    I need to create alerts for lead creations. When I create a Lead I distribute it for a employee responsible, and these employee responsible should receive an alert in his Alerts Home Page.
    I've created an alert category in T-Code: ALRTCATDEF, and also an  Action Profile in T-code: CRMC_ACTION_DEF.
    In Alert category I added the role SAP_BC_ALM_ALERT_USER in "Subscription Authorization".
    I also added the role SAP_BC_ALM_ALERT_USER to each user, and assigned the alerts in the work list.
    Doing this, when I create a lead to one specific employee responsible, every employee that have the role SAP_BC_ALM_ALERT_USER assigned will reseive the alert for the created lead.
    How can I restrict the alert for the lead employee responsible?
    Regards & Thanks,
    Susana Morgado

    I would first try to use the action condition technique (scheduling and start conditions) in order to only process the action if the context is correct (so for instance when a certain status is reached).
    If this is not possible (for instance because you don't know what has changed when using condition technique), you can see what the action actually does (in abap), and use this code to build a custom function which you can assign in for instance CRMV_EVENT.
    More information on the use of CRMV_EVENT can be found [here|http://sapcrmweblog.blogspot.com/2011/08/adding-functions-to-events-using.html].
    Hope this helps.
    Regards,
    Pieter Rijlaarsdam

Maybe you are looking for