Custom Attributes in Target Group

Hi,
we are experiencing an issue during Target group creation: we are unable to see our custom attributes in the Target Group.
We have an Attribute List created by a Custom infoset; the Infoset is based on a custom Table.
When we create a profile Set from this Attribute list, the Target Group is created with the correct records number, but when we look at the Target Group we find there only standard attributes, that are not defined in our Attribute List (they seems all BUT000 fields).
How can we add our custom Field to Target Group Structure?
I've read someone suggests to enahnce CRM_IM_ADD_DATA_BADI BADI: this is the only possible option? there is a way to do it using SPRO transaction?
Thanks and regards,
Francesca

Hi Francesca ,
Thanks for reporting your concern.
When the target group is displayed on the WebUI, the system uses a standard structure crmt_mkttg_genil_tg_i_enhance. The fields available for selection comes from this structure. In this structure there are some 30 user fields provided which can be filled through the badi 'CRM_MKTTG_SEG_MEM_EX'. Using this badi you can display the required Custom details.
Hope this helps.

Similar Messages

  • Custom Attributes in Target Group Email Campaign Not Refreshed

    We have a campaign sending emails to a target group of BPs.  To fill our custom attributes with values  we have implemented our code in badi CRM_IM_ADD_DATA_BADI method CRM_IM_BPSELE.  We tested our code using the Test Send feature from the email form and all worked fine.
    But when we ran the campaign in the background for a Target Group with multiple BPs it would not work correctly, our attribute values were incorrect. 
    We discovered while debugging the job, that the badi gets run once for each BP, but the attribute values from the previous BP do NOT get refreshed.  In fact there are 2 entire sets of attribute records in the CT_ATT_VALUES table parameter.  Each time through it multiplies by another set of our attributes.
    I have put code in the badi as a workaround that deletes the previously filled attributes for the previous BP, but I'd like to figure out what is causing this problem.
    Any help would be appreciated.
    thanks,
    Lee

    Hi Lee,
    Is this issue resolved for you now??
    I am facing the similar problem.
    Though the BADi is not used for these two mails (it is used in some other mail forms), it is actually called in 'CRM_ERMS_MAIL_COMPOSE' Function Module and the process is same as u said. There are 2 sets of values.
    I am using a Mail Alert functionality where in a 'Mail Alert ON' is sent to field engineers (FE) and then upon FE accepting the work we will send a 'Mail Alert OFF' to FEs.
    Problem is, we get one or two fields data incorrectly sometimes. I am not able to find out the root cause yet.
    Please let me know if you have had any resolution to this!
    Thanks in advance.
    Chaitanya

  • Custom attributes in vendor group

    Hi,
    I am unable to see custom Attributes after upgrading from SRM 3.0 to SRM 5.0
    As per SRM 5.0 the vendor root is visible now in PPOMV_BBP.
    As per post upgrade document if we register custom attribute in T77OMATTOT then the attributes should be visible in PPOMV_BBP
    Still the attributes are not visible in PPOMV_BBP
    can anyone suggest on the same
    Helpful aswers will be rewarded.
    Thanks
    jayesh

    Hi
    T77OMATTR is the main table.
    Please have a look in the other tables as well.
    T77OMATDIR   General Attribute Maintenance: Change Information          
    T77OMATGT    Attributes of General Tree-Overview Object                 
    T77OMATGTC   Attributes of General Tree-Overview Object                 
    T77OMATTDB   General Attribute Maintenance: Help Indices for Attributes 
    T77OMATTIX   General Attribute Maintenance: Index Analysis              
    T77OMATTOT   Gen. Attribute Maintenance:Attributes per Obj.Type/Scenario
    T77OMATTR    General Attribute Maintenance: Definition of Attributes    
    T77OMATTRT   General Attribute Maintenance: Text Tables for Attributes  
    T77OMATTSC   General Attribute Maintenance: Application Scenarios       
    T77OMATTST   General Attribute Maintenance: Texts on Scenarios          
    T77OMATTUS   General Attribute Maintenance: Attributes per Scenario    
    <b>Other useful links -></b>
    <u>Looking up Org. Paln Attributes
    Re: Creating a new custom attributes in org structure
    Re: The attributes for user could not be determined --
    Re: Attributes dropdown list empty in settings (SRM 5.0)
    urgent: regarding ATTRIBUTES</u>
    Regards
    - Atul

  • Target group with customer and contact person

    Hi experts,
    I want to create a target group with customer data and the names of the main contact person to execute a campaign.
    During execution I need the name of the contact person to personalize my forms, the campaign activity should be connected to the customer (and not the contact person).
    Is there a functionality to solve my problem? (CRM 7.0)
    Thanks in advance.
    Werner

    Hi Werner,.
    I assume you want to select for Organizations (BUT000 Type 2) and you want to see in the Target Group the Contact Persons which are assigned via Relationship to the Orgnizations.
    Create for example a Datasource with  Infoset CRM_MKTTG_BP_ORG, and under Details for Business Partner use BUT000_PER-PARTNER_GUID.
    In Field Function Module maintain CRM_MKTTG_PF_BP_TAB_TO_CP.
    Create an Attribute List an assign the Datasource. After Creating the Target Group you will see the Organizations with all the assigned Contact Persons via Relationsship.
    Regards
    Andreas
    Another Tip: Create a Target Group for Persons, assign it to the Campaign, and now set the B2B Flag. Depending from your SP Level you have to apply a note so that the B2B Flag is visible (1263915)
    If you set the B2B flag you will get Communication Data for letters, for a Call List from the Relationship.
    Regards,
    Andreas
    Edited by: Andreas Pauli on Apr 29, 2009 10:18 AM

  • Using custom fields to create Target Groups?

    Hi Experts,
    I might be missing something but I couldn't find anything in the different help guides, so if anyone saw that please help!
    Do you know if it is possible to edit the available fields to search/filter Contacts, Accounts etc. when trying to add them to a Target Group?
    We are currently not really using any Marketing-related features but this will be a focus for us in a few months so we are having a closer look at this area. There might be some other settings in the Admin/Project Scope etc. that I am missing and need to check and activate.
    We have some custom fields integrated with our on premise SAP CRM system which are heavily used by our marketing departments for extracting Contact lists, this is why we would like to see how we could reproduce this in C4C.
    Thanks a lot in advance,
    JB.

    Hi JB,
    You can go to => Marketing => Target Groups => Your Group => Members => Personalize => Start Personalization => Add => Add Contacts => here you can select the field you want to change/hide, you can also drag and drop a field to change its order on the screen => Personalize => End Personalization.
    Please find attached file with only a few changes that I did on that screen.
    Best Regards,
    Cristiano Rosa

  • Create/Edit "Custom Attributes" in Dynamic Distribution Groups

    Hi,
    I wanna create a Dynamic Distribution Group based on the users "title" and "company".
    I've noticed that there are 15 "Custom Attributes" that I can edit in someway, I guess via PowerShell?
    So what is the easiest way to accomplice this?

    Hi,
    Agree with the above suggestion, you can also bulk change the custom attributes:
    Get-Mailbox -ResultSize Unlimited -Database Execs | Set-Mailbox -CustomAttribute1 “title”
    http://dougg.co.nz/2012/05/01/bulk-setting-exchange-2010-custom-attributes/
    to Edit Custom Attributes：
    get-mailbox -filter {customattribute1 -eq ""} | set-mailbox -customattribute1 = "<value>"
    And here is a reference about Create/Edit "Custom Attributes" in Dynamic Distribution Groups：
    http://windowsitpro.com/exchange-server-2010/exchange-2010-sp2-value-custom-attributes
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best regards,
    Angela Shi
    TechNet Community Support

  • Target group from filter criteria of an attribute list.

    I have created an Attribute list in the T-code CRMD_MKTDS and a filter criteria for this attribute list.
    Now, I would like to use this filter criteria to create a Target Group.
    So, is there any Function Module, standard Report program or methods of any standard class  to create a target group using this filter criteria ?
    How can I determine the BPs related to the filter criteria and assign them to a Target Group?

    Hi,
    You can use class 'CL_CRM_MKTTG_GENIL_TG'  or Function module ''CRM_MKTTG_TG_READ'
    to create Target group's from Profiles.
    Hope this helps.
    Regards,
    Anup

  • Grouping by custom attribute

    Hi,
    When you do a Edit Region properties in a Portal page, there is a section called Item Display Options. It has a Group By option, wherein you can group it by Category, Author, Date and Item type. Is it possible to have a custom defined attribute in this list?
    Thanks,
    Vijay.

    hi vijay,
    sorry but there is currently no way to group items in a region by any other attribute (also custom attribute).
    regards,
    christian

  • Adress list custom attribut user in multiple group

    Hello,
    I am trying to configure some distribution group in exchange 2007
    I wanted to have list based on my OU but i cant find how so i went with custom attribut
    I put my member in the correct service BUT i have the manager that need to be on all the group and some user in2 or 3 group.
    I cant figure how and where to do this!
    Can you help?

    So you're trying to use Dynamic Distribution Groups?
    If you're creating the DDG using the Exchange Management Console just be sure to select the "recipient container" in the second dialog box (the one labeled "Filter Settings").
    Sometimes its easier to create a "normal" static distribution group and then add the DDGs as members. You can add the DDG that selects the managers to as many different groups as you like. You may wind up with more groups, be the filter on the DDGs will
    be much easier to understand (or to create if you must use Powershell to construct the DDG).
    --- Rich Matheisen MCSE&I, Exchange MVP

  • How do i know that "one customer is belongs to that particulate target group or not??"

    Actually i have to check, one customer is part of the Target group or not??That target group contains Thousands of customers!! so how do i found this customer is part of this target group or not!!

    This is function module , pass IV_PARTNER_GUID = your partner guid in this fm.

  • Target Group Integration on Cloud for Customer

    Hi everyone,
    I just need to know if it´s possible to integrate CRM´s Target Groups in Cloud for Customer, i just checked the Integration Guide1405, but no information is displayed. But in Communication´s Arrangement functionality we have a scenario to manage Target Groups, so i understand we can import from CRM as backend in our Cloud for Customer system.
    Any idea of how to do it?
    Thanks in advance,
    Regards

    Hi Thierry,
    in general the guide refers to opening a ticket in the SuccessFactors support portal to request the ticket. As this is your first implementation you probably don't have a registered user in here.
    Question:
    Do you have someone else on the project/at the customer to help with the basic implementation of the SuccessFactors Platform? If yes, please ask this person to open a ticket with SuccessFactors support.
    If not, then you can also open the ticket directly in C4C and it should be internally routed to the appropriate support contact.
    Please note: In addition you will also need to do some basic configuration of the SuccessFactors Platform and SAP Jam. More information about initial steps to access and setup
    the SuccessFactors Platform for SAP Jam can be found in the document „Setting up SAP Jam for Integration with other SAP Solutions” included in the package “SAP Best Practice for SAP Cloud for Customer Integration” available at http://service.sap.com/rds-cfc-erp
    If you are interested in more information, please check out the respective training offerings for SuccessFactors Platform and SAP Jam available as "Academy Courses".
    Hope this helps,
    Ingo

  • Target group with attributes of persons and organizations

    Hi,
    we are using marketing attributes for persons and organizations.
    Now, we want to realize a segmentation for organizations with marketing attribute “productgroup xyz” and persons with marketing attribute ”decider”.
    Is it possible to combine organizations with marketing attributes and persons with marketing-attributes in one target group?
    thanks

    Hi,
    thank you very much for your answers!
    I’m sorry, I think my description was too short. I have the following situation /  problem:
    I am using InfoSet CRM_MKTTG_BP_ORG with business partner BUT000-PARTNER_GUID.
    My person datasource based on Info Set CRM_MKTTG_BP_ORG and business partner BUT000_PER-PARTNER_GUID.
    Furthermore I’m using an attribute Set for organizational attributes and an attribute set for person attributes.
    Now I want to build up a target group with persons who have specific attributes. The persons should be members of organisations with specific attributes.
    Example:  Persons with attribute “decider” should be member of organizations with attribute “productgroup xyz”.
    We are using SAP CRM 5.0. I added the function modul CRM_MKTTG_PF_BP_TAB_TO_CP in my organization Datasource. 
    But I have problems to build up a profil set and a target group where I can combine the attributes of the organizations and the attributes of the persons. The counting result is ‘0’.
    I hope my description is understandable. Thank you in advance!
    Volker

  • Creation of Target group.

    Hi All,
    I having one urgent requirement, we have maintained the Ztable for maintaning the information of Vehicles against Business partners.
    The Fields in the said Ztables are Vehicle type, vehicle Reg Number and BP number.
    I want to send the mails using target group to customer who is having Perticular vehicle type for that i have created Infoset using the Ztable, then i have created the data source for target group still i m not getting the desired result !!!!!!
    please anybody tell me that i  missing any of step for above requirement ???
    how to link up the BP to Ztables fields ???
    How to create the said Target group ???   
    Regards,
    Dipesh

    Hi,
    You can try this alternative solution:-
    Instead of maintaining vehicle type etc in Z table, please crate it as "attribute", and assign it to Business Partners.
    You can use CRMD_PROF_BP transaction to assign Attributes to Business partners.
    Based on the attributes , you can subsequently create the "target group".
    Regards,
    PD
    Pl. Reward points if it helps !!

  • Automatic Profile Set / Target Group Creation in SAP CRM

    Hi,
    Need some help on the listed process.
    Is there any procedure to create Profile Ser/Target group automatically based on certain criteria? We want to reduce the manual work of Profile/Target group creation for the users.
    We are currently using SAP CRM 5.0 and looking at options of creating Target Groups automatically based on infoset. The criteria used to model is below mentioned.
    - New Customers  & Head Office (They are the customer specific Z-fields in BP Master Data)
    - Relationship Data: Has contact person Relationship. This is based on the assignment of Contact person to the BP (i.e. Day when the Relationship assignment done to the respective BP Master Data --> under Relationship tab page.
    We are not using Attribute Set (that we assign to Marketing Attribute tab page of BP Master), for your information.
    Appreciate, if you could let us know whethe this is possible by Standard feature/ any work around on this.
    Kindly do the needful.
    Thanks,
    Rahul

    Hello Rahul,
    it is possible to create a target group from an external list as far as i am aware. Maybe have a look at
    http://help.sap.com/saphelp_crm50/helpdata/en/57/d7de42777c2978e10000000a155106/frameset.htm
    Regards
    Mark

  • Changing default Target Group when creating transports.

    Hi All,
    We have 4 different target groups for the transports created in development systems. I would like to make one transport group default which is mainly used by majority of consultants.
    How to make one transport group default during creation of transport.
    Regards,
    Krishna

    And to just make it more clear :
    and here is the SAP help on the subject:
    Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport layer.
    The transport layer determines whether objects are assigned to a local or transportable change request.
    Use
    Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System and transport layer.
    When you create a package, it is assigned the standard transport layer of the SAP System.
    If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
    The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
    If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
    If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
    Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
    It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
    To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
    Only the system adminstrator can make changes.
    Caution:
    The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of Release 4.0A and cannot be maintained.
    Best regards,
    Menelaos

Maybe you are looking for