Custom Button Missing in Customer Master XD01/02/03

Hi All,
I have one query regarding Custom button in Custome Master (XD01/02/03).I have implemented BAdIs using CUSTOMER_ADD_DATA_CS and CUSTOMER_ADD_DATA as per my requirment.
Query:
While click the custom button(which i have created in Customer Master XD01/02/03) , as per the requirment the subscreen is displayed but the Custom Button is missing
Where in Standard Buttons like 'GENERAL DATA' and 'COMPANY CODE DATA' Std buttons in Customer Master(XD01/02/03) Etc. buttons going to disable mode while click these button in Customer Mastar.
Is there any OSS notes to implement OR we required to write any code in BAdI.
Thanks,
Sridhar.

If you want to give message on Save then
check SY-UCOMM EQ 'SAVE'.
Display error message.
Plus it is a good practice to have the filedsin CHAIN-ENDCHAIN so that whenver you throw an error it remains in Input enabled mode.
Thanks
Nabheet

Similar Messages

IPhoto slideshow export custom button missing

I have been exporting slideshows to QuickTime and since upgrading to '11 and snow leapord, I had a custom button on the slideshow export that is now not there. I can only do the standard export that is an m4v file and only the standard sizes. Anyone know where the button was deactivated?

there is no equivalent button
left
middle
right

Custom button goes missing after click the button in Customer Master

Hi All,
I have one query regarding Custom tab button in Custome MAster.I have implemented BAdIs using CUSTOMER_ADD_DATA_CS and CUSTOMER_ADD_DATA to match my requirment.
Query:
While click the custom button(which i have created in Customer Master) , the subscreen is displayed but the Custom Button is missing.Where in Standard Buttons like 'GENERAL DATA' and 'COMPANY CODE DATA' Std buttons in Customer master Etc. buttons going to disable mode while click these button in custome mastar.
Is there any OSS notes to implement OR we required to set up some PF status to match above requirment.
Please let me know.
Thanks,
Sridhar

If I follow you, no. That's the way it works. The buttons are composited with the background so become part of it. I'd rethink the design.
Basically, you don't want the highlights to determine the color of unselected buttons. You'll always have fringes and jaggies. Having a non-transparent color set for the unselected state kind of does what you want, but won't look the best.

Reg.Reconciliation account in Customer master XD01

Dear All
I donn't know where to add reconciliation account for customer master (XD01),
I create G/L account,G067-Reconciliation account.Next what I should do for that G/L acc should come to customer master Rec.Acc.
Please help me

Hi Raja,
Goto EC01 Transaction code and click on copy as icon and copy all the GL Accounts from 1000 to your company code.
Now goto XD02 and goto Company Code Data and check.
I think this will solve your problem
Reward if helpful.
Regards
PAVAN.

PLZ Customization for Customer 300000 missing in table CIN customer master

PLZ ARGNT
Customization for Customer 300000 missing in table CIN customer master
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings

Dear Murli
There is no customization for Customer Master, just J1ID Customer Master CIN
details is maintained
Regards
Jitesh

Created a custom button bar and pull-down menus are missing

created a custom button bar and pull-down menus are missing.
I want pull-down menus of 'action', 'edit', 'query', 'block','record', 'field', 'window' and 'help' to display.
What property setting or other item do I need to change?
Thank you for your help.

You could try this, I haven't used it before so I'm not sure if it's what you're looking for but it's worth a shot if you can't get anything else to work.
http://web.mac.com/ijasonwhite/iwebunlimited/TipsBlog/Entries/2008/12/29_Drop_Down_Navigation_iniWeb.html
Hope this helps!
Josh

Customer master XD01 system gives RUNTIME Error

Hi all,
While creating customer master xd01 system takes 10-15 minutes and gives RUNTIME Error.
can anybody explain it why system behave like this i spoken with my BASIS & ABAPer guy they also dont know the solution
Your help is required
Regards,
Abhijeet

This is not an SD or even SCN question. Short dump is just a result of time out, but this transaction should not be taking so much time as to time out. There are tools available in SAP to diagnose and troubleshoot the performance. I'm not sure how could neither ABAPer nor Basis admin know about them - you might want to raise this with IT management.
It's something that has to be analyzed in your system locally, not posted on SCN.

How can I create a custom button for opening a form?

I have a parent form having child forms. In my main form I want to create custom buttons for opening child forms. I want to use master-detail form but there are more than one child forms, and in master-detail form I can only create one detail form. So I will create a form based on a table and in that form I will call the child forms by custom buttons. Can I do that?
Thanx,
Gulsah.

This can be easily done. First open up two instances of your Portal. In one window, you will need to go into your component you wish to link FROM. In the other window you will need to go into your component you wish to link TO. In the component you wish to link TO there will be a moduleid. Note this somewhere. Then, you will see an area that says: "Call Interface: Show". Click on this. (In the window you are linking to.). In this window, you will see a bunch of stuff. At the bottom you will see a URL call. This is the call you need to use. At the top, it explains each piece of the URL call. Just subsitute YOUR appropriate information into the URL call. In the form you wish to link FROM, create a button. Once you create this button, it will appear at the bottom, click on it and you will see an area to insert a Javascript. Click the onClick and insert:
//this is the variable you want to pass from one form to the other
get_field_name = getField(this.form,'COLUMN_NAME_IN_DATABASE');
//this is so you can open the "child" form
window.open('/pls/cc_prod/DAD_NAME.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=MOD_ID_HERE&p_arg_names=_sessionid&p_arg_values=&p_arg_names=COLUMN_NAME_IN_DATABASE&p_arg values='+GETFIELD_NAME+'&p_arg_names=_COLUMN_NAME_IN_DATABASE_cond&p_arg_values=%3D');
In the fourth tab, where it says, "....before displaying form" insert the following: (This will tell the form how to handle the getField function.)
htp.p('<script language="JavaScript1.3">
< !--
function getField(form,fieldName)
var objName = "";
var tmp = "";
var dAction = "";
var sel_idx = 0;
var cnt = 0;
var instance = 0;
var slicedName;
var fillData = new Array();
for (var i = 0; i < form.length; i++)
slicedName = form.elements.name.split(".");
tmp = slicedName[2];
instance = parseInt(slicedName[3],10);
if (!tmp)
continue;
objName = tmp;
if (objName == fieldName)
return form.elements[i].value;
//-->
</script>');
I hope this helps.
null

Create customer with reference to customer master

Hi,
If the user creates customer master (XD01) with reference to another customer master then system should not copy some of the fields. How can I restrict this in SAP. Is there any Copy control functionality for customer master to customer master?
Regards,
Soumen

Hello,
As far as i know in Standard SAP system, when we are copying or even creating a Customer
Master Recording in XD01 with reference to a customer, in case of the basic data i.e. General Data, the
datas that are copied are
1. Country.
Under Company Code data, the following are copied,
1. Reconcilation Account.
Under Sales Area Data the following are copied,
1. Currency.
2. Shipping condition.
3. Account assignment group.
4. Taxes.
Regarding your question, you can change the data and there is no concept of copying control here.
Regards,
Sarthak

Adding custom button to Ribbon for custom list definition

I'm trying to add a custom button to the ribbon, specifically for a custom list definition. I have two custom list definitions, one for a document library (Type="11008") and one for a list (Type="10002").
I can use the following CustomAction to successfully add a button to the document library ribbon:
<CustomAction Id="MyCustomAction.DocLib"
RegistrationId="11008"
RegistrationType="List"
Location="CommandUI.Ribbon">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.Library.Share.Controls._children">
<Button
Id="MyCustomAction.DocLib.Button"
Alt="Help"
Sequence="5"
Command="SayHi"
Image32by32Left="-64" Image32by32Top="-320" Image32by32="/_layouts/$Resources:core,Language;/images/formatmap32x32.png"
Image16by16Left="-64" Image16by16Top="-176" Image16by16="/_layouts/$Resources:core,Language;/images/formatmap16x16.png"
LabelText="Say Hi!"
TemplateAlias="o1"/>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler Command="SayHi" CommandAction="javascript:alert('Hi!');"/>
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
If I try to do the same thing for my list, the button does not show up:
<CustomAction Id="MyCustomAction.List"
RegistrationId="10002"
RegistrationType="List"
Location="CommandUI.Ribbon">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.List.Share.Controls._children">
<Button
Id="MyCustomAction.List.Button"
Alt="Help"
Sequence="5"
Command="SayHi"
Image32by32Left="-64" Image32by32Top="-320" Image32by32="/_layouts/$Resources:core,Language;/images/formatmap32x32.png"
Image16by16Left="-64" Image16by16Top="-176" Image16by16="/_layouts/$Resources:core,Language;/images/formatmap16x16.png"
LabelText="Say Hi!"
TemplateAlias="o1"/>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler Command="SayHi" CommandAction="javascript:alert('Hi!');"/>
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
What am I missing that is keeping me from getting this button to show up in my List ribbon?

Well, I debated just deleting my question, but I'll leave it up in case someone else runs into this. My custom list definition for my list had <Toolbar Type="Freeform" />. I don't remember why I changed that, but once I changed
that back to <Toolbar Type="Standard"/> my custom buttons started showing up as expected.
The answer
here pointed me in the right direction.

Is this a bug or am I doing something wrong? (Custom Buttons)

I have a project where I've created a custom buttonbase which has a custom skin.
Create a button that uses the custom skin which extends the custom button base the first time the button is used it doesn't work the way I would expect.
Here's what happens. The first time the app is loaded the button's up state shows up just fine. If I mouse over the button it flashes black for a second while it loads the mouse over state. If I mouse out and over again it works normally. Now if I click on the button it flashes black again while it loads the selected state and then the selected over state. After the first time the button functions correctly. But naturally I don't want the button to flash black the first time it's used. I want it to show my custom skin the first time not the second and subsequent times.
I've included a project that demonstrates the problem. I have added some for loops in the part of the code that determines the custom colors for the button, just so that the black flash is really obvious.
If you look at it there are three classes. The ButtonSkinBase which defines the base look for all skinned buttons. The ButtonSkin which is a specific skin to use. And the ButtonGraphic which is just a custom definition for a button.
I think the problem is in the SDK in that it isn't loading the ButtonGraphics in the ButtonSkinBase class before they are used. It loads them when they are used. However, I'm not that experienced with the way the SDK functions under the covers so it could be that I'm not doing something I need to do.
Any help with this would be great.
Thanks,
cdman

>When you use the includeIn command, by default the object will only be created when it is needed. Hence, you will execute a creationComplete
>event, and therefore atleast 100 million (sometimes 400 million) loops, when each required Button state is needed. Obviously, once each button
>state has been created the creationComplete handler (invalidateDisplayList) will not usually be called again.
So are you saying there is a better way or another way to do that? Or are you just telling me that's how it works? Because I know that the includeIn isn't creating the other buttons untill they are needed. I need them created when the button is created. That is my question, how do I get the other states to be created when the button is created so that I don't see the button flash black?
>As written, bioStyleChanged will always remain true
>if(!bioStyleChanged) {
> bioStyleChanged = false;
>}
>this code does nothing for you.
Sorry, I missed that when cleaning up the code to ask for help.
Thanks,
cdman52

ID CS3 Custom button limit?

Hello All,
This is a weird one. Seems to be a bug with creating buttons in CS3 (5.0.2) or how Acrobat recognizes those buttons. I'm adding multiple custom buttons to a single page (a master page) and all is fine until I create more than 16 buttons or so. When I export to PDF, it opens in Acrobat as a form. I don't want a form! (I thought you could only convert to a form in Acrobat Professional?) When I delete a few buttons, the PDF is fine. I've done this in several new docs, with the same result.
I have a glossary that I'm trying to add thumb tabs for each of the letter sections (like you see in a dictionary), but with roll overs and links to the text anchors of each section. "A" button goes to "A" section, etc. As I said, everything works perfectly up to about letter "P" or so.
I'm wondering if there is a limit to how many custom buttons you can have in a document and/or single page. Not sure what is triggering it being recognized as a form, but this seems to be related.
Anyone having any issues with creating buttons?

Hi Ken,
Thanks for the quick reply. Appreciate your help again.
I was just looking into trashing prefs when you mentioned it. Trashed both ID and Acrobat prefs. No go.
Some interesting observations I've made:
1. Exporting 2-3 pages at a time doesn't create the form issue, but it returns when I combine the PDFs (some text anchors no longer work, of course). All of the separate PDFs opened fine. (very odd)
2. Including the buttons on either the left or right master page (not both) doesn't cause the issue. I want to include on both, naturally.
3. Including the buttons on the direct pages (not masters) is problematic, also.
If I click the Form icon to remove the form bar and save, would users still get the bar, do you think? That's my main concern. I don't want it to come up when it's not a form. :)
Any thoughts, Dave or Bob? You guys have also given me great advice in the past.

Custom button, Outlook 2010

Just had Office 2010 installed on work computer (up from 2007).
I had used a custom toolbar in Outlook 2007 and had made my own "buttons" to do repeated tasks (most the buttons linked to other network locations). 2007 Outlook you could make a custom button, then right click on it and "Customize" and provide a hyperlink
(to web, or to files or to network locations etc).
That functionality seems to be gone in Outlook 2010...or am I missing it somewhere? I am in Outlook all day and loved being able to immediatly hit a button that would open a network location or an IE URL.
I have searched extensively online, but cant find any reference to this for Outlook 2010.
Thanks for any help.

Can you/anyone provide the appropriate code to open a URL within the Outlook frame - not a separate browser window? I'd like to create a ribbon bar button which opens a URL within the Outlook frame.
Thanks,
Susan
Try this:
Sub OpenURLinOutlook()
Dim olNameSpace As Outlook.NameSpace
Dim olFolder As Outlook.Folder
Dim webFolder As Outlook.Folder
Set olNameSpace = Application.GetNamespace("MAPI")
Set olFolder = olNameSpace.GetDefaultFolder(olFolderInbox)
On Error Resume Next
Set webFolder = olFolder.Folders("OpenURLinOutlook")
On Error GoTo 0
If webFolder Is Nothing Then
Set webFolder = olFolder.Folders.Add("OpenURLinOutlook")
End If
webFolder.WebViewURL = "http://www.bing.com"
webFolder.WebViewOn = True
Set Application.ActiveExplorer.CurrentFolder = webFolder
Application.ActiveExplorer.CurrentFolder.Display
End Sub
Max Meng
TechNet Community Support

You can not make TRUELY custom buttons inb Photoshop

After several weeks of research, dozens of forum posts and replies, I have come to the conclusion that only BASIC, SIMPLE buttons can be made in Photoshop and ported into DVDSP where the only attribute for the selected state is a highlighted background. (ver 3.x)
One of the reasons for needing to create a custom button is for outlined text. This is needed to be able to see smaller buttons on a picture backgrounded menu where there is a lot of dark/ bright spots. Even when porting into DVDSP a button that is outlined text (by applying "Stroke" to the text and rasterizing) the text is solid when in DVDSP.
I was able to do a lot to buttons in Adobe Encore, I can make a line appear when selected as well as change the background color. It was simple to do. Each button was a single .psd file with a Specific name for each Layer SET, not layer. It seems that buttons in DVDSP are embedded objects within a master file.
I defy anyone to create a button for DVDSP (or say how) with the following attributes:
Not Selected--->Outlined text, nothing else
Selected------->Same text, with a line above and a line below and slightly highlighted background.
Activated (optional) Same as selected but with a different highlight color.
Thanks
Mike
G5 Mac OS X (10.3.9)

I am not sure if I am understanding the issue, did you look at the examples in the other post?
http://dvdstepbystep.com/newmap.php
http://dvdstepbystep.com/qm.php
If I understand what you want, create an overlay with 3 colors, the Black, Blue and Red with the Chroma keys, the outline is Black in the file, the lines are Blue in the file and and the Highlights Red in the file
1.) Selected - Map Black to whatever percentage color you want, Map Blue and Red to 0 percent
2.) Selected- Map Black to whatever percentage color you want, Map Blue for the line Color/Precentage and then Red to a color semi transparent number (lower numbers more transparent) which will highlight/tint the background
2.) Active - Map Black to whatever percentage color you want, Map Blue for the line Color/Precentage and then Red to a color semi transparent number (lower numbers more transparent) which will highlight/tint the background
Not sure if you envision something else for the highlight on the background? If you mean change the actual background color of the entire background you probably want to use layered menus

Customer button in IS-U/CSS CIC

Hi gurus,
I'm trying to ceate a new customer button in an exiting IS-U/CSS CIC (other settings are complete) either in toolbar or in the quick key section to call a customer defined transaction.
After copying the Status ISUTEL from Function group EECICTOOLBAR_ISU to my FG, inserting my new function
and customzing the table EECICTOOLBAR (incl. new entry in Table EECICTOOLBAR_PRG) I still can't see the new button in CIC. (if I change the buttons which are already visible, I can see the changes=>The status seems to be used, but not the new one)
Do I miss something?
where call I call my transaction?
Any better idea how to implement it?
your help will be greatly appreciated!!
yan

Hi Consultant AC ,
thanks for your reply.
1. I didn't change the profil configuration, which already be used and works properly. any idea, what could be wrong?
2. because the client doesn't want it in Action box. Is that the only way to implement this?
Edited by: yaaaaan on Apr 26, 2010 10:23 AM

Custom Button Missing in Customer Master XD01/02/03

Similar Messages

Maybe you are looking for