Custom notification/response? (wf_standard.block?)

I have designed a workflow which which requires a user to review a document before continuing. The document is in the application which this workflow supports, and the user will access the document through this Web app. and enter their review comments. The review comments will be written to the application's tables.
Is this the correct approach?
1.) send a FYI notification to the reviewer where the message contains a URL to the document review page in the Web app.
2.) issue a wf_standard.block to stop the process until the document has been reviewed.
3.) issue a wf_standard.continueflow from the Web app. once the review is done to continue the process.
Please let me know if there is a more simple way...
--Andrew

I discovered that the correct call to use from an external app to signal workflow to continue is wf_engine.CompleteActivity()

Similar Messages

Custom Error Responses - S1WS 6.1

Hello
Iam trying to create custom error responses. I did this thru Admin , Class Manager.
I gave the absoulte path to file which contains error messages for the HTTPcodes (Not Found, Unauthorized etc)..
When i did testing, the browser still gets 404 back. I did verify whether obj.conf has the settings. I also restared the web server. The setting was selected for "Entire Web Server".
Please help.
Thanks
ssk

I'm not sure I understand. Even if you specify a custom error page, the server will continue to send a response with a 404 HTTP status code. It will use the contents of your page for the body, but the HTTP status code will still be 404.
If you're not really concerned about the HTTP status code but rather the body of the response, check the log files:
1. Check the errors log. Is the server trying to tell you something?
2. Check the access log. Is the server getting the request? Is the server sending your file (check the response size, it should match the size of your file)?
If there's nothing in errors and access suggests the server is sending your file, the browser may be choosing not to display your error page. Microsoft Internet Explorer does this when the page is below a certain size. Try increasing the size of your error page.

How to make fields mandatory in Message Address for Custom Notification.

Hi Experts,
We have created a new custom Notification Type and we were in the process of configuring it. I want to know, if I want to make a few fields obligatory in Message Address, can that be achieved through configurations. I am basically an ABAPer so please pardon my ignorance if the question looks basic.
In our implementation, I have seen different Work Orders with different mandatory fields in Message Addresses. I hope the same is achievable for notification as well.
Thanks for your help.
Regards,
Subhrangsu

There are 2 ways to make any Notification filed mandatory.
1. Configuration route:
Here Under Plant Maintenance->Maintenance and Service Processing>Maintenance & Service Notifications>Notification Creation>Notification types> Set Field selection for Notifications:
You select influencing button and your notification type then select the Radio button under Required column (against the
field you want to make mandatory)
2. User Exit Route: Through SMOD -->User Exit QQMA0014 -->Cutsomer Exit EXIT_SAPMIWO0_020 -->Include ZXQQMU20.
Then put your code in this include.
Code Sample:
IF I_VIQMEL-QMART= 'AC'.
IF T_VIQMSM-MNGRP IS INITIAL.
MESSAGE ID 'IW' TYPE 'I' NUMBER 464 WITH 'Tasks'.
RAISE EXIT_FROM_SAVE.
ENDIF.
ENDIF.
(The above Code makes the 'Tasks' filling mandatory in the Notification type 'AC')
Hope this answers your query.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Oct 8, 2010 9:21 AM

You are not recognized as a user in the SAP customer notification system

Hello,
we are in OSS registered as CCC. I am able to send notifications from our SolMan to OSS with components(instalations) which are registered under out SAP customer number(our SolMan instalation etc.).
When I want to sned notification for our customers to OSS but with component of our customer(he has another SAP number, his instalation) then I got an error message
You are not recognized as a user in the SAP customer notification system:
You are not recognized as a user in the SAP customer notification system
Message no. DNO158
Diagnosis
No address data exists for this logon user in the SAP problem notification system.
The function you activated could not be executed.
Activated function Diagnosis
Send notification to SAP The notification was saved, but could
not be sent to SAP.
Update notification at SAP The notification was not updated to
reflect the SAP version.
Check for changes The system cannot compare the notification
with the current version at SAP.
Request list of the The notifications that you sent to SAP
notifications contained cannot be updated.
in the SAP problem notification system.
Procedure
Contact your system administrators.
Could you help me please?
view V_AISAPCUSTNOS ist filled with our customer numbers, I am in AISUSER...
Thanks Miloslav Pudil

Hello Miloslav,
We have the same problem.
Somebody knows how can we resolve this?
Thanks,
Diego.

10.3.1 Update - custom notifications still broken

I have a z10 and since I purchased it over a year ago, my custom notifications set for contacts for text messages are ignored.
Whenever a text message comes in, the phone plays the default tone not the custom tone I have set for that user. The other custom tones work (for BBM and phonecalls).
This has been several updates and this function - included in the original rollout of BB10 - has never worked.
Any one have any solutions or explanations.
(Please, do not recommend I buy an app for a feature that I paid for with the included OS. I am asking for solutions to the problem in OS 10.3.1. Thank you.)

Nor do I have any way to know which is causal...at an internet distance, all I can do is try to evaluate what you say and make sense of it. If the OS isn't working correctly for you, then it is possible that the version you are now on is somehow corrupt. Or perhaps that the update process itself caused error. Both are possible, but we can't really tell you which it is (if either, for that matter).
So, what I would suggest is a very clean OS reload, and not do any restore from backup unless and until you find a version that works as you expect. You can use LINK to reload what your carrier has approved, or you can use AutoLoader to load any version that you desire.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SAP GRC AC 10 - Unintentional line break inserted into custom notification email

Hello
We are having a strange cosmetic issue with one of our custom notification templates. When the notification is sent two sentences in different parts of the email are being cut off and sent to the next line. We tried to review in Word to see if there were any hidden breaks or margins. We also tried to manually type in the information as well as paste into notepad then back into SE61. We cannot seem to figure out where these breaks are coming from. I've included a few screen shots below. Any help is appreciated!
SE61 DOCUMENT TEXT
EMAIL NOTIFICATION TEXT
NOTE: The sentence breaks after training in the sentence beginning with "For additional information about GRC..." and "(This email was generated by an automated..."

Hi Stacey
From the screen shot you cannot see any issues (can understand confusion)
Are you able to try to remove the paragraph and save. Exit SE61 completely to free up any buffer and then go back in and re-add it?
Possibly look in other SCN communities as it's SE61
Regards
Colleen

WF_STANDARD.BLOCK

hi friends,
I am new to oracle work flows, We have issue with a customised oracle work flow in quality module,
Back Ground :
Basically this work flow should go through two level of approvals and it should generate a prq no.
Issue #1
But every time its getting struck at wait_for go moveorder node which had WF_STANDARD.BLOCK as a function.
Lable Name :WAIT_FOR_GOMOVEORDER
start/end:Normal
not proceeding, Can any one help me guys,
Best Regards,
Vizith Kumar Bhogi

Hi,
I´ve noticed you use this BLOCK activity in multiple subprocess. Sou you should do this:
wf_engine.CompleteActivity(ORDER, 1003,ORDER_PROCESS:BLOCK3,
null);
Depending of your OWF version, your result should be 'None' instead of 'Null'
Regards,
Luiz

Custom Notification Service

Hi,
Is there any way I can configure Oracle BPEL Process Manager to use my custom notification service. In case of Identity service there is a way to configure Oracle BPEL Process manager to use custom repository. Can i do same thing for notification service? I want to use custom notification service because in our product we can manage the notification templates(i.e. subject, body etc.) through administrative service.
Thanks,
Dipak

Hello,
Can you give me an example how to do this? Is there any example provided with the distribution to which i can look into? I will be really thankful to you if you can please give me a quick reply.
Regards,
Dipak

Custom Notification Mailer

Hi,
Custom Notification mailer was defined and so far its running well. Just compared with the other instance...in other instance were 'Workflow Notification Mailer' is running it sends notification when ever a indent is raised. But in the instance where 'Custom Notification mailer' is configured it does send any notifications...
any idea?
thanks,
baskar.l

Pl indicate why a custom mailer is being used. Pl see MOS Doc 786647.1 (How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process.?) on how to create a custom mailer. We used to have a a very basic custom mailer that was successful in sending notifications, but have since gone back to using the default seeded mailer.
HTH
Srini

Custom Notification on approval of a change in a PO

Hello,
My requirement is to track the changes in a Purchase Order and notify the same to the user.
Example:
PO#1001, Revision# 0
       Line1: Unit Price= 100
       PO Approved and notification sent to user with standard information.
PO#1001, Revision# 1
       Line1: Unit Price= 200
      PO Approved and ....
Standard Behavior: Notification is sent to user with standard information.
Required Behavior: Notification to be sent with standard information as well as it should show the changes (similar to the date we can see in 'PO Change History' in EBS)
Also I need to send this customized notification to the requester of the PO. But I learnt that for a standard PO, the attribute 'REQUESTER_ID' is populated only if the line type is 'Temp Labor'. So, I am not able to use this attribute.
So to summarize my requirements:
The Changes in a PO should also be displayed in the notification, once the revised PO is approved.
The custom notification should be sent to the 'Requester'.
I would really be grateful for your help and suggestion on this.
Thanks in advance!
Regards,
Sam

Yeap...
1 - I have a SC in avalible in SOCO of a PR.
2 - Select the line of item and insert of work area to create a follow-on document
3 - Select the line and push the button "Create Purchase Order" (In this momento I would like to create a flow of approval)
PR (ECC) >>> SC (SRM) >>> Approval (SRM) >>> PO (ECC)
Rgs,
Pedro Marques

Ringtone and custom notification

I tried to select the ringtone and custom notification, but in spite of some contacts have not selected any sound, vibration, led, my q10 does not follow the rules set for the sisngolo contact but follows those of the profile.

I discovered this ... custom settings regarding ringtones and alerts are only if the selected profile is the standard one. If you put your listing in vibration such as that is jumping around .... so if I select a contact for all alerts off, putting into vibration .... "wins" the profile ... and goodbye to customize notifications of contact .... nice ... after spending 700 euro ... blackberry no exceptions ... unfortunately

Classic not charging when normal notification is changed to custom notification

I've changed to a custom notification. The led does not flash on charging and the phone does not charge. Change back to the 'normal' notification set up and the phone charges!

Hi, I do have the same problem!
Where did you change that notification thing?
Thanks

NI PXIe 4141 Custom transient response

Hi All,
I am using NI PXIe 4141 SMU. I am trying control the Settling Time and Overshoot of step response of my Voltage output. I am trying to use "Custom Transient Response (CTR)" configuration for this purpose. We have following three parameters that we can use to configure the CTR.
Pole-Zero Ration
Compensation Frequency
Gain BW
I have tried to change the values manually and check the system response. I couldn't see any change in the Transient Response of SMU. Is there any documentation available to calculate those parameters according to my loading condition?
Is there anyone who worked on such setup?
Please help.
Anandelamaran Duraisamy,
Senior Project Engineer,
Soliton Technologies (P) Ltd,
www.solitontech.com

Curve 8330 Custom Notifications

Hello all. New Blackberry user here. Just got the unit yesterday and spent a few hours trying to get everything set up.
The problem I am having is trying to get my custom notifications to work with my contacts.
Ok, so here we go:
Sender A sends me a text or e-mail, and I want lets say Notifier_ChiGong as the sound for them.
Sender B sends me a text or e-mail, and I want lets say Sound A on my media card to play for them.
Now, I want all other texts and e-mails from everyone else (on or not on my contact lists) to play lets say Sound B on my media card to play for these.
When I receive a voice mail notification, I would like a completely diffrent sound, lets say Sound C from my media card to play for this one.
I have tried setting up the excpetions and all that but nothing works...All texts emails and voicemail notifications plays the same sound, Sound B.
I have searched the forums, but I can't figure this thing out for the life of me. Everything else is coming to me as I keep playing with this unit. I also spent 2 hours last night manually entering my contacts into this unit, since my previous phone was not a smartphone, and I did not want to synch into my e-mail software and destroy my many various contact lists...
Andy help would be greatly appreciated.
Thanks
Jeff
Surf City, NC
I have tried setting the exceptions, and it does not work.
Solved!
Go to Solution.

Welcome to the frums!
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=26725#M26725
I copied and pasted the post below.
It is complicated for SMS tones, but possible. Follow the directions here:
This workaround will allow you to have specific alerts for email and messages from specific senders:
(Works with OS 4.2 and above)
1. Go to Profiles on your BlackBerry and create a new custom profile, naming it the name of your targeted sender.
2. Edit and change the Messages, Level 1 Messages, MMS, Phone and SMS notifications for this profile to the custom ringtones you prefer for this contact. Don't worry about changing things like Calendar, Messenger Alerts and Tasks don't matter for individual users.
3. Once all of your ringtone settings are set for the new custom profile, save the changes. Now you will be back to your Profiles list and will see your custom profile listed there with the standard ones.
4. Now wheel click and select New Exception.
5. Title the exception whatever you want (would be smart to name it again the name of that particular contact).
6. In the FROM line, click the trackwheel or trackball and select the user from your address book. They should now show in your From line.
7. Scroll down and change the Use Profile option from Active Profile to your newly created custom group.
8. You may remove the check box from "Custom Phone Tune" if you already have a custom phone tune for this contact, or leave it and set it in the new custom profile as well.
9. Save the changes.
Now once you have followed these for each SMS contact - click save as number nine says. Go back to your profile and click either normal or loud for the profile sound. Make sure you do not have any exceptions already in your exception area regarding the ones you have made a SMS tone for. if you do, remove them so you SMS tone will work. You can actually set your ringtones under each one of these you set up as well. When you are changing your SMS sounds, you can click on phone and change your ringtone to that specific one. Hope you can understand this.
All of us will be more than happy to help you, just let us know!
Have a great day and good luck. Enjoy your blackberry!
Nurse-Berry
Follow NurseBerry08 on Twitter

Processing E-Mail Notification Responses

Hi,
I have a workflow (2.6.2) that sends e-mails to all the users in a group but only requires a single response to complete the workflow step. Is it possible to identify the individual user that has responded via the links provided in the e-mail notification as we need this information for an audit trail?
Thanks in advance
Lisa

Hello gusev67
Have you tried with/without custom email notification (SMTP) settings?
Have you checked if the defaut or custom SMTP port has been forwarded to your px12?
Have you checked if your ISP is blocking SMTP ports for your connection?
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Custom notification/response? (wf_standard.block?)

Similar Messages

Maybe you are looking for