Custom USSD via GSM Modem_SMS Session

Hi,
My aim is to create an sms session between 2 phones via labview. I've heard of network service providers using the USSD protocal for achieving this. Is there any way i can create a custom USSD session for my application? Or is there any other way of doing this?
I use LV2012 and a GSM modem. I'm not sure/not been able to find any AT commands that can do this. Any help would be great.
Regards.
Danny

Hello Danny,
I have just seen your post and was wondering if you are trying to use LabVIEW on these 2 phones or are you going to be unsing a separate computer to do the same. You will need an external device acting as a server in order to achieve this .
It might be worth it (if you havent already) looking at some of the tools available on the functions pallette on the block diagram in LabVIEW  under Data Communications >> Protocols >> Email Server >>SMTP messages.

Similar Messages

  • Not able to generate AS2 MDN when receiving custom XML via AS2

    Hi friends,
    I have setup the trading partner and the corresponding TP certificate import for receiving the custom XML via AS2 channel.
    I am receiving the custom xml properly to oracle b2b and able to receive the same to bpel as well. however in the oracle b2b console under reports tab i am seeing only one record for inbound document receive and i am not seeing the other record for the AS2 MDN going back to vendor. I have setup the AS2 channel under the external trading partner --> Channel using the vendor AS2 URL and selected all the security parameters while creating the Outbound AS2 channel.
    1. Not able to generate AS2 MDN when receiving custom XML via AS2.
    2. eventhough i am able to decrypt the inbound custom XML and ablr to recieve it in bpel also for processing, in the reports tab the inbound message state is changing to MSG_ERROR and it has the folloing error message:
    Error Code
    B2B-50037
    Error Description
    Machine Info: (***********)  Description: B2B inbound message processing error
    Error Level
    ERROR_LEVEL_COLLABORATION
    for AS2 MDN generation for custom XML receiving using As2 protocol, do we need to setup anything other than the outbound As2 Channel using the external vendor AS2 URL?
    Can you please help me how can i generate the AS2 MDN for the inbound custom XML document i have received and also why the inbound message is failing even though i am receiving the custom XML properly to bpel?
    Thanks,
    Amirineni.

    Hi Prasanna,
    Vendor has enabled the ACK mode as SYNC.
    Below are the headers for the inbound message to B2B. and we are able to receive the input message to bpel also.
    Protocol Transport Binding
    ChannelName=******** AS2-To=****AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=****** Recipient-Address=https://******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=****** Content-Disposition=attachment; filename="smime.p7m" Host=****** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=****** Mime-Version=1.0
    Message Digest
    Message Digest
    Digest Algorithm
    sha1
    Transport Protocol
    HTTP
    Transport Protocol Version
    1.0
    Url
    http://******
    security
    Transport Headers
    ChannelName=****** AS2-To=******AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****AS2_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=***** Recipient-Address=*******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=******* Content-Disposition=attachment; filename="smime.p7m" Host=***** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=***** Mime-Version=1.0
    Thanks,
    Amirineni

  • Hi i have an iphone 4 that needs to be updated but my phone is using the cellular company simple mobile via gsm chip and my phone isnt jailbroken will this mess up my phone.

    hi i have an iphone 4 that needs to be updated but my phone is using the cellular company simple mobile via gsm chip and my phone isnt jailbroken will this mess up my phone.

    If your iPhone is truly unlocked - purchased as unlocked through Apple
    or through wireless provider that sells unlocked iPhones or unlocked
    by a wireless provider, then the update should not mess up your iPhone.
    If your iPhone was jailbroken or hacked to change wireless providers,
    then the update will relock it to the original wireless provider if you are lucky
    or turn it into a useless brick if unlucky.
    Back up first to protect against glitches or other problems.

  • I called Verizon prior to travelling abroad and asked to turn roaming on. As of today, 4 days later, I have no service. I do not have a landline to call. GlobalServices email does not work... Does anybody know how to reach customer support via email?

    I called Verizon prior to travelling abroad and asked to turn roaming on. As of today, 4 days later, I have no service. I do not have a landline to call support. GlobalServices email does not work... Does anybody know how to reach customer support via email?

        Hi Florence2014
    I'm so sorry your having issues. Unfortunately there isn't an email for global support. The only way way to reach them while traveling is to call them at 908-559-4899.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • F4-Help (drop down) in customer search via Tel. No.

    HI,
    F4-Help (drop down) in customer search used to have a search functionality which allowed 'Customer' search via 'Telephone Number'. For example, in tcodes: xd03, vd03 or where ever there is a customer input field is.
    Now in 4.7 this does not exists. Does anyone knows how to restore it?
    Thanks

    Hi Nablan,
    I found a note 195508 which states that modify two views in SE11 (V_CONTACT and VKNK_CONTACT). The second one does not exists in 4.7. The instructions for first one is incomplete.
    I am still searching for answers.
    Thanks for your suggestions to look at DEBI. I am curious as how you found DEBI as the relevent 'search help'.
    Thanks
    Nave

  • CHARM: Starting customer actions via toolbox??

    Dear developers,
    does anybody know wheter you can start customer actions via the toolbox in a change request order?
    I want to start such a customer action (function module or customer method) when choosing an entry in the toolbox and saving this order. Is this possibly? If yes, can you explain the way to the solution.
    Best regards,
    Jens

    Hello Paul,
    thanks for your answer and sorry for the delay.
    Where should I set this parameter?
    SolMan is not using SSO, our portal environment is working fine with SSO.
    The way how we are working is:
    Portal (with SSO, LDAP) --> IViews --> ABAP Backend Applications
    The way how we are using SolMan + Ticketing system:
    Portal Login (SSO, LDAP) --> user open the IView for SolMan --> starting the transaction for ticketing
    Planed is:
    Whenever a ticket status is changing under a Charm ticket (workflow ticket), the user is getting an automatic generated SolMan mail with the following information:
    HTTP://<servername>:8000/SAP/BC/BSP/SAP/DSWP_BSP/DSMOP.HTMLISBSP=X&CMD=NOMI&NCMD=CRMVW&ID=D11FD44B83657E2AE1000000136A420A
    This link is starting the SolMan, but require a login to the SolMan without SSO, LDAP use. This means for us, the users would need access direct to SolMan as well, instead to use the SSO, LDAP from the portal.
    My question now:
    How can we modify the link that it is going via the portal SolMan IView with a parameter for the ticket ID.
    Thanks a lot
    Bernd

  • Change/display customizing tables via IMG only - SM31

    Hi Experts,
    I've posted this message previously in another forum area on SDN. In the absence of a response, I've posted it here, hoping that this is a more appropriate area.
    We are attempting to maintain table LRF_WKQU through SM31 in our QA system.
    The following message appears:
    Change/display customizing tables via IMG only
    Message no. SV000
    I've also noticed that a number of other tables show the same response.
    We are able to perform maintenance of this table in our Production system via SM31.
    I've checked the table properties, and they are the same on both systems.
    Does anyone know if there is a system setting or such like, that will allow for maintenance of tables via SM31 and not the IMG?
    Thanks,
    Chris

    Why do you want to change customizing tables outside the IMG. In the case of this table LRF_WKQU you mention there are a few more tables which might also be updated  when you use the IMG. Without IMG the risk is very big on inconsitencies.
    The other tables being updated through IMG (for table LRF_WKQU) are
    T346
    T346T
    T346L
    Whe you use SM31 (or SM30), these tabels will not be updated. This does not have to cause a problem, but I think for that reason (because it MIGHT cause a problem). SAP shows you this message.

  • What is the maximum size of the application to download to iPad via GSM. Is it 20 Mb? Is it possible to change this parameter?

    What is the maximum size of application to download to iPad via GSM. Is it 20 Mb? Does exist any possibility to change this parameter? In the towm where I live there is lack of wifi and the only possibiluty to download something from Apple Store is to use GSM/3G.

    It has partly to do with the carrier.  From what I've summized from reviews & feedback online is since Apple iPhone was the most advanced phone on the market when it was initially released the carriers were concerned about using up bandwidth with the apps & movie downloads so a limit was intially set for 10mb max on 3G connection.  Later apple raised the limit, against the carrier's advice, to 20mb max.
    The interesting part is the limitation doesn't exist on Android phone when they also have large apps & movies which are available for download & they use the same networks the iPhone uses!  So why are the iPhone users still limited to the amount they can download at once while the Android users are not.  They pay the same for thier data plans, if not less in some cases, that iPhone users do!

  • F.27 Customer  statement  Via E-mail

         Hi Frds,
    Pls suggest me................

    Kabil,
    Please refer to the link below for more details:
    Customer Statement via Email
    Regards,
    Ashvin

  • How can I contact customer service because my registration number according to Adobe cannot be upgraded; and Adobe's message to me said that I was registered for CS4; I am currently registered for CS5.  Is there no way to contact customer service via emai

    How can I contact customer service because my registration number according to Adobe cannot be upgraded; and Adobe's message to me said that I was registered for CS4; I am currently registered for CS5.  Is there no way to contact customer service via email or phone re this problem?

    Problems with registration you can contact our support team at Contact Customer Care.  Please make sure you are signed in and selecting the proper selections from the pull down.  If you continue to not be able to contact our support team then I would strongly recommend the use of a different web browser, computer, smart phone, or tablet.

  • Post Customs Document via /SAPSLL/API_CUSTOMS_DOC_CREATE

    Hi Gurus,
    We are trying to post Customs document Via FM /SAPSLL/API_CUSTOMS_DOC_CREATE. Is there a better way to post Customs document via program/manually?
    can any one provide a sample program to create/change Customs document via program?
    Regards,
    Abhi.

    HI Abhshk Bhatta,
    do you have any experience with the connection of a non sap system to sap gts?
    my idea is to use to call this function module e.g. via a web-service and post the customs declaration into gts....
    what do you think - may that be possible?
    regards,
    Ralf

  • Point to point connection via gsm

    Which is the best way to send and receive data from a laptop to a mobile via gsm ? Is it possible to do that with a J2ME application ?
    Thanks for your help.
    Michael

    To resume my design:
    8 remotes cameras connected directly to the aironet 1310, i mean directly without switch between them.
    Finally this 8 cameras with his respecive bridges will be connected to the central site equiped with the same bridge and an omni antenna. This brige is connected to a cisco switch that can provide IGMP solution. At this point whe have a server who manage multicast to cameras and a DVR to record the cameras view.

  • IOS 5 update on iPhone 4 - no connection to the Internet via GSM

    Hello,
    After the iOS 5 update my iPhone is unable to connect to the Internet via GSM. I tried to reboot and restore the device and also to reset the networ data transmission settings. So far neither of these worked. The Wi-Fi connection works after the update just fine. I also contacted the carrier to make sure my service subscription is ok.
    Does anyone have a similar problem?
    Thanks,
    Tomek

    Had to restore the phone to fix, after making sure all the possible settings everywhere were United States and English, but it worked. Still find it amazing that an update would change so many settings in so many places, especially the ones that aren't on the phone.

  • MWA Sign on ---reconnecting via an existing session instead of asking Y/N ?

    Is there a configuration option that would default to reconnect to MWA (using R12 EBS version 12.1.2 )via an existing session instead of asking Yes/No to reconnect ?
    Albert

    albertpi wrote:
    Is there a configuration option that would default to reconnect to MWA (using R12 EBS version 12.1.2 )via an existing session instead of asking Yes/No to reconnect ?What is the exact message you get to reconnect?
    Are you referring to the message you get when the session timeout? If yes, then I believe there is no way to achieve this except for increasing the timeout (which I think you do not want to implement). You may log a SR to confirm this with Oracle support.
    Thanks,
    Hussein

  • GW 7: Open a custom folder via ViewOpen token

    Hello,
    I'm trying to open a custom folder via ViewOpen(6;;"FirstName
    LastName\CustomFolder"). This has been working with GroupWise 6.5, with
    GroupWise 7.x it opens the Inbox only.
    Has there been any changes to ViewOpen token function between GroupWise 6.5
    and Groupwise 7.x, or is this a bug?
    Thanks for your reply
    jr

    Right - which leads to the more general point that the folder name
    structure is different in 7.0
    "Denis Dorigo" <[email protected]> wrote in
    news:[email protected]:
    > Hi...
    >
    > i just tried this...
    >
    > use fristname Lastname Home\folder
    >
    > Regards
    >
    > Denis
    >
    >>>> On 20/12/2006 at 06:59, in message
    > <nb5ih.17990$[email protected]>, <[email protected]>
    > wrote:
    >> Hello,
    >>
    >> I'm trying to open a custom folder via ViewOpen(6;;"FirstName
    >> LastName\CustomFolder"). This has been working with GroupWise 6.5,
    with
    >> GroupWise 7.x it opens the Inbox only.
    >>
    >> Has there been any changes to ViewOpen token function between
    GroupWise
    >> 6.5
    >> and Groupwise 7.x, or is this a bug?
    >>
    >> Thanks for your reply
    >>
    >> jr
    Regards,
    Michael Risch
    Developer SysOp

Maybe you are looking for

  • Connecting my MacBook Air (Mar./2013) to TV

    I have researched using Apple TV or a cable.  I had decided on Apple TV then discovered that it does not include an HDMI which I believe I need anyway. Therefore, why not just use the cable?  If so, what adapter - or anything else  - would I need? Is

  • CreateJaznUser: import oracle.security.jazn.oc4j.JAZNUserManager not found

    Hello! I need to create a function that could allow Application users to change their passwords.I use a JAZN authentication in the application. So, I decided to analyze contents of the CreateJaznUser application first. But compilation of this applica

  • Tax code not getting picked up from PO during SES

    Dear Experts, I am looking for configuration where the end user need not enter Tax code during SES. I tried a scenario where I did not maintain any service master and also did not enter any line item in service tab at item level, rather I processed m

  • Fix multiple broken aliases after sync

    I've synchronised my iMac with my new MacBook. I have quite a lot of aliases set up on the iMac, however, when they're transferred across, they retain their source path (i.e. when on the MacBook, clicking on the alias doesn't work because it's lookin

  • How To Handle SQL Exceptions in JPA

    Hi, we are working on toplink JPA. My use case is I have an emp table with columns as "empid" , "emp name" , "job" with "empid" as primary Key. Here I'm creating a record in the Database by using a jspx page. Here My problem is when I'm entering a du