Customer return Material posting in quality

Hello Friends,
I assigned inspection type 06 to FERT material in material master. When material returns from customer, system creates inspection lot. But for this inspection lot, quantity posting is not possible, Because there is no tab "Inspection lot stock" in usage decision.
How to get that tab so i can post the stock from quality to FG unrestricted stock.
Waiting for Reply!
Thanks!

Hi,
Inspection lot 06 is non stock relevant, please read SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/2d/3519be448c11d189420000e829fbbd/frameset.htm
You can process the materials as non-stock-relevant goods.
If a material is not stock relevant, the system does not valuate and track the quantity of goods. All inspection lots with the following inspection lot origins are not stock relevant:
06 Return from customer
Regards,
Csaba

Similar Messages

  • Post goods receipt problem of customer returns material

    hi,
    i have a problem while doing customer returns  in VL01N (PGR).system displays error msg.
    E VL 171
    Status of inpection lot xxxxxxx / partial lot 00000 does not allow goods issue.
    Material having inspection set up on material master with inspection type-06
    can u tell me how to solve this.
    thanks in advance.

    Hi prakash
    In MMR i think you must have assigned a quality inspection as 06 . so at the time doing delivery , and before PGI , quality inspection took place. Now when you are doing PGR , i think you just check the goods insepction data at item level in delivery data . and  remove that quality inspection  06 and then  save it . then only PGR will happen .
    Because you have assigned qualtiy inspection in MMR , system is checking , wheather the goods are good or not .that could be one of the reason it is not doing PGR, if u remove that 06 which is goods inspection then PGR will be done , then you can proceed further
    Prakash if you have done in adifferent way plz share with us and if it got solved also plz let us know
    Reward if useful
    Regards
    Srinath
    Edited by: sri nath on Apr 5, 2008 11:44 AM

  • QM steps for customer return material (mvt 655)

    Hi Qm Guru
    When material return from customer due to some defect (material defect some reason like moisture or rain).then material comes in quality inspection. As for example
    after Return from vendor (movement type 655)  material comes in quality inspection. suppose  50 kg comes in in quality inspectionu2026and I want to send 10 kg in unrestricted and 40 kg for reworku2026what are steps and how I will do this process
    Kindly suggest me pleas
    Regards
    aqueel

    Hi,
      1. Maintain Inspection Type 05 in Material master.
      2. Don t Maintain any Inspection lot Origin in SPRO  > QM > Quality Inspection > Inspection Lot creation > Inspection at shipping > Assign Inspection lot Origin  to Delivery type.
    3. Create Inspection Plan for Customer return with usage 5.
    4. Then create return delivery with respect to sale order no or Document no.
    5. Do PGI.
    6. Now a lot will be generated with stock posting option.
    Regards,
    Muthamil

  • EXCISE in Customer Returned Material

    Had searched, but couldnt find this kind of query
    Hai All,
       Actual sales - OR - DEL- pgi- Invoice - Outgoing Exc.Invoice-
    now, when customer returning goods,
    RE order ( with / without ref) - LR - pgr -  RE - Cr for Returns ( i havent created any exc invoice for  RE billing)
    How to reverse the excise entries, in both cases ( with OR without ref to OR/F2)
    I did - J1I7 to know find the Outgoing Exc.Invocie of original/ref Billing doc-
    ( how can we find, if there is no ref when creating RE-order?)
    Then, I tried to Capture Exc.Invoice- J1IEX ( wrt: Without Purchase ORder -EWPO)-
    I entered the Original Outgoing Excise invoice - system throws mssg as " Material Document can not be processed"-
    am I following wrong path? - or you want me to Make Adjustments directly in J1IH ( all debit entries - Other adj / Credit entries- Addnl Adjust) .
    Please Clarify-

    DOne
    flow:
    VA01-VL01N-VF01-J1IH

  • Customer return material process

    Hi,
    I want to know the the process for below 2 cases we have a manufacturing plant
    1:For factory sales we follow the process
       VA01 > VL01N > VF01 > J1IIN > VF02 release to accounting
    now after some days  if customer dont want the material they send the material back,  thhen wahat is the std. process to take the materila back in stock  also customer balance should also get reduce for that invoice.
    2:Some time for exibition we want to send the material out of factory for tempoprary basic  after completion of exibition we want to take that stock back in our own stock is it possible withotu any customer to do this process,  what is the std. process for this.
    regards,
    zafar

    For customer returns, you need to create a return order referencing the parent billing document, do return delivery for the goods received and raise credit note to that extent so that system will take care of necessary adjustments in FI.
    With regard to exhibition, check my suggestions in the below threads
    [Re: What is the use of the T code VLMOVE|Re: What is the use of the T code VLMOVE]
    [Re: Exhibition |Exhibition]
    thanks
    G. Lakshmipathi

  • No valuation for customer returns material

    HI,
    when goods receipt is done for the returns and repair process thare should be no valuation done for the material returned by the customer as the material is a returnable material to the customer.
    how to track this in SAP.
    REGARDS,
    RAJESH KUMAR RAJU,
    9986085455

    You cannot use the same material (the material that has been billed) in returns order because if you do not want the material to be valuated then you have the material type as UNBW.
    Hence create a new material with material type UNBW and use this materia in the sale order.
    Regards,
    GSL.

  • Rework for Customer returned material

    Hi,
    The scenario is follows:
    The material is received from the customer through invoice as rejected and taken into stock. The material is withdrawn and then reworked with addition of components and Placed into stock.
    Pl.let me know the procedure to handle the scenario including capturing the cost.
    Rgds,
    Prasad

    Hello Raghavendra,
    1) You take the customer rejected materials into blocke stock (non valuated materials). MRP will not plan these parts.
    2) You do the rework.
    3) If found OK then transfer this to available stock (form blocked to un-restricted use). Now this will become valuated stock (relevent for costing and MRP).
    For the costong scenario i suggest you to open your query with FI/Co forum.
    Regards
    TAJUDDIN

  • How to Post Customer Return in Materials Management ?

    Dear Experts,
    I want to know the cycle of excisable customer return material.
    How the Goods receipt will be posted with excise duties and further processing in materials management.
    Also please mention the integration points with Sales and destribution.
    Thanks in Advance.

    Hi,
    The returns order can be created with reference to an invoice to ensure traceability of the process. It may be worthwhile ensuring this is mandatory when creating the returns order type. It may also be worthwhile ensuring the returns order reason was entered on the sales document. Thus, it may be necessary to add this in an incompletion procedure. You may want to copy the pricing from the invoice back into the sales order.
    Note: - There is no need to indicate a negative value in the copying control rules, as the system sees the document type as a return. It automatically posts the entries in the finance document as opposite entries on the ledger. By using the same pricing values, you ensure a reversal of the externally created invoice.
    It is advisable to have a billing block assigned to the return order to prevent a credit for returns being created until an authorized person releases the billing block. Go to Sales, Sales documents, Sales document header, Define sales document type in the billing block field in the billing section.
    Once the returns delivery is created, the material is receipted back into our plant. The material should use a goods movement back into stock that inspects the stock, such as blocked stock, before placing it back into available stock to be consumed by the next sales order that places a demand for the material in the plant.
    Tip: - It is advisable to indicate a shipping condition that is specifically used for returns. Thus, all return deliveries or goods receipts can be done by a specific shipping point. This is useful when running the delivery due list. You can select only to process the returns deliveries, as well as offer better visibility of stock movements.
    The standard item category used by returns is REN.
    Process Flow: -
    1. VA01 - Create Return Order (Order Type - RE) w.r.t. original Billing Document
    2. VL01N - Create Delivery w.r.t. Return Order (Here do Picking and Post Goods Receipt i.e. PGR)
    3. VF01 - Create Credit Memo w.r.t. Delivery Document
    4. J1IEX - Capture Excise Invoice --> Without Purchase order and enter all details like; Material, Vendor, Quantity, Assessable Value, Excise Duties like; BED, ECS and SECess, etc... manually and Post.

  • Link Customer Return order and Quality Notifcation

    Hi Experts,
    After serveral rounds of investigation and interacted with SAP, I though to post it here to get abest answer for below question.  I hope I will get it from you guys as soon.
    When we create return sales order through Function -> Sales order -> Create Select Order type, the retrun sales order is not copying header data so SAP told us to create new action box to create retrun sales order from Quality Notification.  We customized and did all config then found another two issues now.
    a) When we create return sales order via Quality notification, it enable us to save separately in VA01 screen and then click save button it is coming to create quality notification page after saving the sales order.  Now if I press F3 or back button it is asking me "do you want to save the document" if I say no mistakenly then it came out with saving return order.  Issue:  there might be user error in system they forget to click yes sometimes, in that case the return order only created without quality notification.  Solution Expecting: I want to restrict the user to not come out without saving the Quality Notification if already return order created.  Where I need to change? Which program I need to amend?
    b)  After creating both quality notifcation and return sales order if user wants to view the document flow return sales order to find out what is the quality notification there is no link from there.  So user would not find what quality notification is created for that particular return order unless until if he knows the quality nofitication of return sales order (I know that through quality notifcation we can find return sales order however there is no link from return sales order document flow to find out Quality Ntofication) .  Could you tell me which userexit if update I will the document flow/track of Quality notification.
    Thanks in advance.
    Regards
    Rc Gopi

    Hi Gopi,
    I am not so sure about your second requirement but here I try for 1st query. Try this if it could work!
    1.     Lets co-relate this case with posting the stock to block stock through quality notifications through  action box.
    2.     Here even though we put all required details like quantity and storage location system informs us that u201CMaterial will be posted to blocked stock after the notification is savedu201D
    3.     This indicates if you donu2019t save this notification material posting will not happen.
    4.     I think you should look at the logic of this program (particularly for not carrying out movement unless notification is saved) in order to update the program of creation of return sales order through notification.
    5.     You can modify your program accordingly. QCC0 > Quality notifications > Notification processing  >Define action box > Define Functions for the Action Box. Select appropriate notification type and double click on activities. Select activity and click on detail icon to view which function module is assigned for the creation of returns order. Modify that.
    6.     As a result of which if user accidently clicks on no, in QM01 neither notification would be created nor the order.
    For your second requirement, may be you need to utilize any BAPI for order creation which can capture notification number and flow in to any of the order creation field. Perhaps you need to incorporate this part also in above FM.
    Regards,
    Anand Rao

  • Customer return - 655 movement type - stock posting reversal after UD

    Dear All,
    I have done customer return using movement type 655. Quality lot has been generated & I have processed the lot mean given the UD for the same lot and qty has been posted to Unrestricted stock. I have done wrong receipt ( Customer return).now I want to reverse process.
    Please guide me what to do in this case?
    Thanks & Regards
    Kundan Kumar

    Hi
    1.If You have done usage decision for the lot.
    material is no more in QI stock.You can bring back that material to QI by 08 Type of inspection only.
    2.But if you want to reverse Mvt type 655 then,
                    T-code
    656     VL01     Create Delivery
    656     VL01N     Create Outbound Dlv. with Order Ref.
    656     VL01NO     Create Outbound Dlv. w/o Order Ref.
    656     VL02     Change Outbound Delivery
    656     VL02N     Change Outbound Delivery
    656     VL03N     Display Outbound Delivery
    656     VL08     Confirmation of Picking Request
    656     VL09     Cancel Goods Issue for Delivery Note
    Go to Tcode OMJJ
    Enter Mvt type 656
    Check the setting  for this Mvt type.
    Regards
    Sujit S Gujar

  • Customer returns to quality check storage loc............

    hi,  sap gurus,
    suppose some customer X has returned some 100 goods from 1000 he purchased and then these goods has to be transferred to different storage location because there quality check happens and after 72 hours or so then the tested goods will be transferred to goods for un restricted use and
    how to do this configuration in SAP r/3.
    plz help me onthis.
    regards,
    sd consultant

    If your requirement is something like this :
    Goods coming in - After GR is put - Goods should be posted to Quality Inspection not to Unrestricted Use.
    If its so,
    Goto Material Master
    Goto Quality Management Tab Page
    Activate the "Post to insp. Stock"
    Your requirement should be fulfilled.
    Thanks
    Vaidee
    Edited by: Vaidee on Aug 27, 2008 8:20 AM

  • Material not posted in quality and no inspection lot has been created

    Dear All,
    We are trying to carry out the sales return scenario . we have activated the inspection types 06 and 12 to the material how ever when we do the PGR for the returns order the returns is carried out and the stock goes in unrestricted and not in quality .
    Please advice how to resolve this issue

    Hi Ram,
    Follow the below Customer Return procedure.
    Case1.
    The 06 - Inspection type is not stock relevant and also it is not possible to change bcz it is SAP std.
    1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Mvt type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
    2. If don't want stock for inspection and directly post to Unrestricted using MB1B with mvt type 453 Transfer posting to returns from customer to Unrest.
    3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
    Case2.
    Inspectoin type 05 is a stock relevant inspection type.
    To use 05 you must assign the 05 inspection type to the delivery item in configuration.
    follow this path.
    tcode vov6 - there will be schedule line category DN.
    go to details of DN.In Business data,check which movement type is assigned here.
    I think in your case it will be 653.
    change it to 655 and try now.
    hope it will work.
    revert further clarification
    Regards,
    S.Babusingh

  • Quality inspection in Delivery,Customer Return and Customer info record

    Quality inspection in Delivery and Customer return
    Dear Friends,
    Here is my Question
    For Delivery inspection i am using inspection type 10 meaning when ever there is goods issue during delivery inspection lot is created ,RR and UD post stock to Unrestricted if pass and unblocked stock if fail or rework or change to another customer  and COA is printed if UD is pas
    is my understanding is correct
    For Customer return i maitanin inspection type 06 , Meaning when ever there is customer return , GR is done in IM  and inspection lot is created,RR and UD and post the stock to  unrestricted and Blocked stock if fails
    is my understading is correct in the above scenario
    Also where this Customer info record is used and related with inspection
    From my understanding  Customer info record is used to link sales organization and customer to the material  in Quality inspection
    so that by means of the Quality inspection indicator in Custm info record can control the inspection lot creation before delivery or after delivery and what is customer indicator
    Please can some give me a clear picture of the above , sorry to ask so many questions in one thread
    Thanks & Regards
    Raj

    Dear Raju,
    Let me make you clear
    1) Customer info record stores data related to material / customer. You can decide whether the inspection has to be before delivery, after delivery or at the customer place.
    2)Inspection lot 10 is created when you save the delivery to a particular customer. Inspection 10 doesnt have stock posting tab. If you have selected in Customer info record inspection before delivery then only after you give the ud for the lot it will allow for PGI. You cannot stock posting to any stock as in 01 or 04.
    neither you can change the customer.
    3) For customer return inspection 06 inspection type will not give stock posting tab. It is a stock irrelevant inspection type. You can 05 inspection for the same. it helps in stock posting
    hope this helps
    Regards
    gajesh

  • Sales Return Material document COGS Posting

    Hi,
    We have a scenario for Sales Return where the client requirement is to Cr the COGS account with same value as used in Sales Invoice.
    Month 1 , Material Std Price is 10$
    While posting GI in Sales Order entry is
    Cr Stock A/C 10$
    Dr COGS a/c 10$
    Now Return is posted in Month 2 , Material Std Price is 15$
    Requirement is to Post
    Dr Stock A/C 15$
    Dr COGS a/c 10$
    Dr Difference a/c 5$
    Where as Std SAP Posts Cr of 15$ to COGS only,
    Pls suggest any clue / userexit / badi
    Regards
    vdheeraj

    Hi Deepak,
    Thanks for your inputs.
    we are implementing in pharma company. As per your suggestion the product which we are taking in as Return material is say for example a tablet which i cannot take in as dissamble production order which is not posssible.
    So a thought to enter as separate item. I know this will affect inventory. ANy suggestion for this.
    Because after tatking this as return item we have to book Incoming Excise invoice and then Credit memo to adjust the customer balance.
    Any suggestion how to follow the steps in SAP. Your help will be very useful.

  • Customer returns quality inspection query

    Dear gurus,
    Could anybody help me our with customer returns quality inspection.
    I have maintained following settings:
    1) Material Master: QM View: Inspection type: 06
    2) Maintained all the master data e.g MIC, Sampling Procedure, Inspection plan for FG material
    From the above settings whenever there is return order takes place and PGR the material don't go to Quality Inspection storage location. It is moving to returns goods storage location. But inspection lot is generating and above all after result recording and UD it does not showing in final stock.
    Can anyone help me out with above issue.
    Thanks in advance
    Regards,
    Mayur

    Dear Ganesh
    Thanks for your answer but it still not going for the quality inspection.
    I have check the config setting of movement type 651 for Returns there Inspection origin is 06
    Could you please tell me which movement type we can use
    Thanks
    Mayur

Maybe you are looking for