Customer Master Sales area data Customer Tax Classification.
Hi Guru's
Want to know that hoew to increase the No. of tax classification lines in the master data. At present there are only two entries (lines) can be given for a single customer.
What is the config menu path and setting involved in order to increase these entries in the Customer master, so as to enter some more combinations in it.
For example I need the folowing combinations:-
DE - MWST - 1
GB - MWST - 4
IR - MWST -6
CH - MWST - 3
At present I am able to enter only any 2 of them and not more than that. I want a solution to enter more than 2 records in the Customer master.
Thanks. Points will be awarded.
Hi
T code OVK3
Menu path img-s.d-basic functions-taxes-define taxrelavancy for master records
In that you will find for customer and material also
For material it is t code OVK4
Regards
raja
Similar Messages
-
Can anyone advise why SAP allows customer master to be created for sales org w/o need to specifying the distribution channel and division in VD01?
Shdn't sales area entries be mandatory at VD01? What's the rationale behind this?
Thanks
Peterhi, peter
if we think generally when we are creating customer master it is only required to know that perticular customer belongs to which salesorg. when& only when he given an order for a product then only divison and dist.chnl on shipping comes into the picture.(customer belongs to a salesorg not to divison, based his purchsing tothe distr chnl.
i hope i did need full
...best regards
rayal -
Taxes in billing document tab in sales area data in customer master record.
Hi Gurus,
I have a problem here. There is no country IN in the taxes in billing doc tab in sales area data. What is the settings for getting the same in customer master record?
Please guide.
Edited by: Chetan Barokar on Mar 17, 2008 3:56 PMHi Chetan,
Go to the transaction XD02 then enter your Customer Number which is giving problem then go to the Sales Area Data-->Billing Documents Tab,there you check whether you have entered the tax detailes or not,
If not entered , enter the tax detailes.
-->If the tax detailes not coming in the Customer master >Sales Area data> Billing Documents tab
-->Also check the settings related to between Country (IN) and Tax Condition type (Tax Category) in the transaction OVK1
-->If the Tax condition type not assigned to the country IN assign the tax type to the country IN in the transaction OVK1.
-->Check OVK3 transaction also.
I hope it will help you
Regards,
Murali. -
Customer Master - Sales text copy to Sales Document Header
Hello,
I have properly configured the text types, access sequences, and text procedures to take text from the Customer - Sales & Distribution and copy to the Sales Document Header. After testing this in my DEV system, everything is working appropriately.
I have transported these changes to my QA system, all transports went through successfully. All configuration is now the same between my DEV and QA systems, and the access sequences are recognized in both systems via the TTXERN table.
All changes were made using transaction VOTXN.
The problem is that when performing my test in QA, the text is not copied from the Customer Master - Sales Area text to the Sales Document Header text. When going to the Text Determination Analysis view, it states 111 - Access Sequence does not exist. When selecting Customizing, it clearly shows that the access sequences do exist.
Has anyone encountered this issue? I have checked SAP notes but have not found a proper resolution for this issue.
Edited by: Andy Slania on Jan 31, 2011 9:30 PMRead OSS Note 1002455 - Errors in texts: Messages VX 201, VX 111, and VX 205 and Note 1002664 - FAQ: Text determination problems after upgrade.
Also check OSS Note 581779 - Text determination analysis: Access sequence does not exist.
One more OSS Note 970153 - Change to Customizing text not transferred to target system may also apply to your scenario.
Regards, -
Need of Tables for the BP Master--Sales Area in CRM
Dear Friends,
i need of your help in finding out the proper tables in CRM for the BP Master -- Sales Area data(Region, Sales District, Sales Office, Business Partner Code, Business Partner Name
Thanks & Regards
ARUNHi,
You can check table BUT000 for BP general data.
For Org data check CRMD_ORGMAN and BUT100 for Roles.
I think these are sufficient for the fields mentioned from your side, if it doesn't suffice let me know.
Regards,
Shobhit -
Adding new field to Customer master sales data area sales tab
Hello everyone,
I am new to module pool so seeking some help from experts here.
I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
I found that there is no screen exit.Is there any other way of doing it?
could you please provide me with a step by step procedure of doing it.
With Regards,
Karishma.Hi,
How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
Hope this helps. -
Customer Master Screen Enhancement XD02 / XD03 / XD01 in sales area data
Hi,
My requirement is to add custom fields for customer master enhancement XD01/ XD02 / XD03 in sales area data.
There are 5 tabs in sales area data. I want to add fields in sales tab after subscreen Agency business.
subscreen similar to Agency Business should be added.
I tried to create Screen group in SPRO and implemented BADI as explained in link below, even then my custom program is not displayed in customer master
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=77005819
Please help.Hi,
Please don't mind but I want to know have you activated the implementation?
regards,
Sarbajit -
Fm or BAPI for Change Customer: Sales area data
Hello All,
I need to change tax classification in Sales area data of Changing Customer ( transaction XD02 ).
Function BAPI_CUSTOMERCRM_CHANGE looks like is ok for this, but I've try it and is not working, maybe i'm forgeting something or is not proper for this.
Do you know a function for this or an sample with BAPI_CUSTOMERCRM_CHANGE ?
Note: Function must not be for online store and Internet Sales.
Any help will be appreciated and rewarded.
Thank you a lot!
BogdanHi again,
Not the BAPI COMMIT was the problem,
But I found FM SD_CUSTOMER_MAINTAIN_ALL, which is working realy fine.
All the bests! -
Report to fetch the text information from customer master sales data
Dear Experts,
We have come up with a requirement where the business want a report/list of the customers for whom a particular text is not maintained in customer master -sales data.
There are many Z text id are configured and are maintained in Sales data- extras- text. In addition, business also need some key fields from the customer master such as name, city, delv plant, payment terms, sales off, sales grp etc.
I could not get any standard table where the text is maintained with the customer numbers. Table STXH can give the customer numbers for a particular text id type but what is maintained against the given text id is not fetched from the table.
So we need the valuable inputs to realize the requirement.
As an proposal, we are aiming to develop custom Z report with the FM READ_TEXT to get the text information with the customer no ( object type KNVV and text id ). But for the additional information, what should be the actual logic for fetching the data. say if this FM is used, what should be the sequence of the logic and ideal selection parameters.
In addition, we aim to use BAPI BAPI_CUSTOMER_GETDETAIL2 to fetch some of the customer ifnormation but many fields are not found in this . can we use some other bapi which can provide the complete general/sales data of customer ( delv plant, sales off, sales grp, custo grp, incoterms, payment terms etc)
Kindly suggest accordingly.
Many thanks in advance.Hi Dharmendra Kumar,
I guess the best would be to check in ABAP General forum on the READ_TEXT sequence/ logic etc..
For customer details, the available BAPIs are:
BAPI_CUSTOMER_GETDETAIL
BAPI_CUSTOMER_GETDETAIL1
BAPI_CUSTOMER_GETDETAIL2
However, you might have to check classes in SE24 to find any existing classes and its method yo give you all the information of a customer. Also check this thread: [BAPI for customer details like in IDoc DEBMAS;
Regards,
Raghu. -
Customer sales area data not replicated to CRM
Hello,
I'm setting up the data replication model for master data based on configuration guide C03.
We have the following customer master situation:
existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
PIDE settings are fine.
The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
So far so good.
But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
System environment:
CRM 7 EnhP2 (CRM RDS)
ERP 6 EnhP6
Kind regards,
KoenHello,
I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
Cheers -
Sales area data is missing when Customer contact replicated to CRM
Dear Experts,
I am facing some problem with the Customer Contact replication from isu to crm, problem is when i create a customer contact by using bct0 interaction record is replicated to the crm, when i open the interaction record in the webic i am getting the error maintain the sales area data ,i am manually maintaing the sales are data in the crm could you please tell me why sales area data is missing while replication could you tell me how to rectify this error.I am using the standard transaction type 0010.
Thanks & Regards
Boyz..Hello Shravanthi,
Have you looked at the screen in the screen painter in ERP (transaction SE51)? Maybe this will give you a clue to what data is missing.
Kind regards,
Johan Wigert -
BP Sales area data can't be replicated without the tax classification saved
Hi Gurus,
We're facing a funny problem here. Our project is using CRM 7.0 integrate with ERP 6.0. CRM is acting as a leading system, which means BP would be created from CRM only and flows to ECC. At the very beginning, we were not able to replicate the BP sales area data to ERP, and an err msg in SMW01 says "tax classification not defined." even i've indicated the tax classification in the BP already. And the sales area data was stuck there forever, never go to ECC.
Later we found out that, the tax classification must be saved before we maintain the sales area data. and it worked fine if we follow this rule.
And we checked the middleware program, it always delete the tax classification when update the sales area from the CRM data flow.
Please advice if this is the standard behavior, if yes, how to make the process make sense and prevent the data flow stuck.
Thanks for your great help
Rgs, Michelle
PS: the mapping for tax is maintained correctly in both systems.Hi,
Could you please tell me as to how did you resolved the above issue, I am currently facing a similar issue, I would be grateful for any help.
Regards,
Nitin Sharma -
No sales area data in BP of "customer"?
Hi,
When I open a BP which is a customer, in "Sales area" there's no data in list. There's information at bottom of screen: "There are no sales areas for maintenance".
I really replicate sales area information into CRM and run report HRBCI_ATTRIBUTES_BUFFER_UPDATE and CRM_ORG_INDEX_CREATE to update buffer. And I have activated buffer for "SALE" in system.
So what's the reason? Do you know it? Many thanks!
Best regards,
LongHi ,
I have faced the same problem , not only BP's but in Products also Sales Org was missing . Do a delta for DNL_CUST and for Material's . By that way my problem was resolved.
Thanks
RR -
Customer master LSMW: Upload of multiple tax categories problem
Hi All,
I am using standard batch input method (RFBIDE00) for creating Customer Master.
In Sales Area Data-> Billing Document tab-> TAXES there are two rows, one for tax category MWST and the other for ZPFS.
In each i need to fill the field TAXKD (TAX CLASSIFICATION) .
In my LSMW there is structure BKNVI which has got all the tax related fields:
Departure country (ALAND):
Tax category (TATYP):
Tax Classification (TAXKD):
Here I need to populate 2 tax categories and hence I have to call the structure BKNVI two times each time passing the tax details for 2 different tax categories.
Any pointers on how to do this.
When i go for LSMW this is the error i'm getting ....
ERROR:
Check tax classification; maintenance is incomplete
Message no. F2269
thanks,
Gaurav JoshiI usually do it like this:
Code: BKNVI = INIT_BKNVI.
STYPE Batch Input Interface Record Type
Rule : Default Settings
Code: BKNVI-STYPE = '2'.
TBNAM Table Name
Rule : Default Settings
Code: BKNVI-TBNAM = 'BKNVI'.
ALAND Departure country (country from which the goods are sent)
Source: INP_STRUCT_01-TAX_COUNTRY (Tax country)
Code: BKNVI-ALAND = INP_STRUCT_01-TAX_COUNTRY.
TATYP Tax category (sales tax, federal sales tax,...)
Source: INP_STRUCT_01-TAX_CAT (Tax category)
Rule : Transfer (MOVE)
Code: BKNVI-TATYP = INP_STRUCT_01-TAX_CAT.
TAXKD Tax classification for customer
Source: INP_STRUCT_01-TAX_CLASS (Taxable Classification)
Code: BKNVI-TAXKD = INP_STRUCT_01-TAX_CLASS.
Save for NO
TRANSFER_RECORD.
Save for SE
BKNVI-ALAND = 'SE'.
BKNVI-TAXKD = '1'.
TRANSFER_RECORD.
Then add for DK (Saved automatically)
BKNVI-ALAND = 'DK'.
BKNVI-TAXKD = '1'.
Regards
Roy Olav Johansen
TechWeaver -
Customer Master/Sales Order
Hi Guru's i have a requirment for my client.
My Client produces Materials (in liquid or plastic form) that it later sells to its customers and Distributors for end use products e.g in ( footware, tape, Paving roads). My client would like in the Customer Master, to map its customers by the end use how can i do this in the customer master? or sales order?
The other challenging thing comes about when my Client sells to Distributors who later sell this product to other customers for end use- how can i map the Distributors since i don't know the custmers they'll sell to and the end use of product.Hi
You can use different fields avaialble in the customer master data - sales area data....that are used for grouping of customers. You can use two different fields for meeting your two requirements. I donot remember the exact naming of those fields and hence I could not provide the field names.
Regarding the nature of the business of your customers...whether they are wholesalers or retailers or endusers....it is the reponsibility of the client to provide you the details and it is not our headache to find out those details.
Thanks,
Ravi
Maybe you are looking for
-
Not able to post vendor payment in case of Cash discount received
Hello We are on SAP ECC 6.0 I'm not able to post an outgoing payment through F-53 T code when cash discount is received from vendor due to early payment before due date. I get the following error message - Tax code V0 for country IN has been deleted
-
I have written a query in Oracle that looks like this: select ID, NAME, GEOMETRY from select a.*, rownum as rnm from select ID, NAME, GEOMETRY from MY_TABLE where SDO_ANYINTERACT(GEOMETRY, SDO_UTIL.SDO_GEOMETRY('POLYGON ((670000 6268000, 670000 62690
-
I have a file on my own server which is available to the public to download I uploaded a new version so I know it replaced the existing one. But when I try downloading it through Firefox I just get the older version and not the new one... I seem to r
-
Please help with this issue
-
Urgent:: How to transport customer exit from dev to test system?
Hi, We have created a Customer exit in our development system in the $tmp package, and we want to transport it to our test system. Can you please tell us how to proceed on this. We are not able to change the package as our package is a development pa