Customers Created in R3 are not replicating in connected CRM System.

Dear All,
I am facing an issue " Customers created in SAP R3 are not replicating to CRM system".
Please provide me the possible do list (Check list) to solve this problem (if any Middleware settings also).  This an urgent issue with the production system.
Thanks & Regards,
Ramana Rao

Hi ,
Check following :
SMQ1/2 - Inbound/ Outbound Queues in both ERP and CRM system.You can see if there some "stoppes"queues.
SMW01 - Bdoc messages in CRM - detailed explanation about errors in replication.
Check if "stop data" flag in table  "CRMRFCPAR" in erp systemis is unchecked.
Check your filter definitions in R3AC1 trn business object "customer_main" .
Also check SAP Note 429423 - you have detailed check list for middelware problems.
Rika

Similar Messages

  • Users are created but Roles are not Provisioned in the Target System

    Hi,
    It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
    In the provisioning job SetABAPRole&ProfileForUser,
    It is says In the Error putNextEntry failed storing
    Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
    MSKEY 58437
    Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
    Regards,
    Hakim

    Hello Nits,
    since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
    Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
    Regards,
    Steffi.

  • Limit PO price changes are not replicated to ECC backend

    Hi all,
    SRM 5.0 ECS SP13.
    When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the  field "VALUE" and "EXPECTED VALUE" have the changed/new value.
    Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
    After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
    I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
    SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
    SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
    SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
    Can someone throw some pointers how to resolve the above issue.
    Thanks in advance.

    Hi
    can you recreate the same issue
    are you saying that
    1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
    2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
    or
    1. limit sc
    2. Limit PO
    3. update not reached ECC.
    Note 1284361 - Limits not transferred to backend purchase order
    Symptom
    Extended classic scenario.
    You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

  • Customer created in R3 is not replicating to CRM

    Dear All,
    I created a customer in R3 (PRD) with 12345 Customer No. and the same customer is not available in connected CRM system.  When i checked with the CRM system (BP trn) it shows msg "BP 12345 doesnot exist"
    Please suggest the required settings in this issue.
    Regards,
    Ramana Rao

    Hi Ramana,
    You need to set up CRM middleware for Initial and delta load of Business Partners from R3 to CRM.
    This link may help you ->
    http://help.sap.com/saphelp_crm40/helpdata/en/1c/924555855849ba896b0af806cd343c/frameset.htm
    Cheers,
    Ashish

  • Contact persons which are created in ECC but not replicated as  employee

    Dear Experts,
    Where can i find the contact persons which are created in ECC but not replicated as  employee in the CRM.
    For example i created the 10000 personal no in that 800 should replicate to the CRM from  ECC but only 600 is replicated and  remaining 200 i have to find in the ECC to replicate again running PFAL.
    If i have to down lode and compare in excel please provide the details. in which tables i have to down load in ECC and CRM which what input.
    Best Regards,
    Siva Anjith

    Dear Gurus,
    Can you please help to resolve my replication issue.
    Best Regards,
    Siva Anjith

  • Some Sales Orders are not replicating into CRM

    Hi guys,
    when I check SMQ2 in CRM,  I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
    when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
    *Error in SMW01*
         Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled     CRM_ORDER
         Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3
    It's not giving much clue what's the error is...
    I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
    any help on this?
    thanks,
    Ken

    Hello Ken,
    When reprocessing a BDoc(via SMW01) you might need to set a flag.
    Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
    Thanks,
    Rohit

  • Roles created in CUA are not distributing?

    Hi,
      I have configured CUA in my system between 3 clients.when am creating a user it is reflecting in the child systems but where as roles created are not reflecting in the child systems.
    Even i have check in SCUM roles are maintained GLOBALLY.what  may be reason....and how o check the IDOC in WE05?
    Thanks in Adavance

    Hello:
    A CUA is a 'central user administration'.
    A CUA does not cover a central role administration. Therefore you need to maintain your roles as usual, means locally in each child system of your CUA.
    role assignements ot users can of course been maintained centrally in the central system.
    b.rgds, Bernhard

  • Some POs are not generated in the backend system

    Hi,
    we've implemented SAP SRM 5.5. in a Classic Extended Scenario with SAP R/3 as the backend system.
    Recently we are facing a problem related to some Purchase Orders. If they have some wrong information for the backend system, they do not get the "Error in process" status but the are put in the "Ordered" status even though they are not replicated in SAP R/3.
    This problems occurs only with some POs and only (for as much as we could see) if the PO has been generated from an Offer (S.C.->Bid Invitation->Offer->PO).
    Could you please help me out with this issue? I can't understand why this is happening...
    Thanks a lot for your precious advices!
    Giovanni

    Hi Sanjeev,
    thanks for your quick reply. I've checked the RZ20 and there's an error message related to the Header Data. I've checked also the PO from BBP_PD and I could see that in table BBP_PDIGP the EP subtype is missing. If I force it and then I transfer the PO again, everything is fine.
    I can't understand why this is happening. I've never had any problems like that with other POs created straight out of a S.C.. The issue is related only with POs created out of a Bid.
    Please, let me know if you have an idea.
    Have a nice day!
    Giovanni

  • Task/appointment in the groupware (outlook) is not replicated to the CRM

    Hi all,
    Someone can to help my friend about a Groupware question?  TKS
    "However, when we create a task or appointment in the groupware (outlook) this activities is not replicated to the crm. Hope you give me some hints to solve this problem."
    All conversation, below.
    18.06.2010 - 15:02:18 CET -
    Hi Anamika,
    OK. Now we are able to send taks and appointments to the groupware.
    However, when we create a task or appointment in the groupware (outlook) this activities is not replicated to the crm. Hope you give me some hints to solve this problem.
    Best regards,
    Caíque Escaler 
    18.06.2010 - 05:24:26 CET -
    Hello Caíque,
    please go to the ADS of the Exchange Server and there provide the
    GWCoonnector with full rights or owner permission to the mailboxes of althose users for whom you want to perform the integration.
    Thanks and Regards,
    Anamika Mazumder. 
    17.06.2010 - 19:38:20 CET -    
    Hi Anamika, thank you for your reply.
    After installing the groupware connector 2.1 we are facing a new
    problem.
    The groupware connector is going to CRM to extract the task that I have
    been created, but in application log I can see an error. The error
    is "ERR:5003 MAPI default folder not available: TASK."
    This folder is created an the permissions to the connection user to MS
    exchange is ok.
    What steps do I have to perform to solve this issue?
    Best regards,
    Caíque Escaler 
    16.06.2010 - 11:34:58 CET -   
    Hello Mr Paulo,
    Can you please install CDO 1.2.1 if you are using Ex 2007 and outlook inthe system where you are trying to install CRM Connector.
    In case you are using Ex 2003 please install Outlook along with the
    CDO component in the system where you want to install CRM COnnector.
    http://www.microsoft.com/downloads/details.aspx?familyid=e17e7f31-079a-43a9-bff2-0a110307611e&displaylang=en
    The link to download CDO 1.2.1
    Thanks and Regards,
    Anamika Mazumder.

    post duplicated

  • [HP Expert Day] "You are not able to restore this system with the media"

    Welcome to HP Experts day! 
    I've got a long-standing problem since last year. Let's see if you can solve this! 
     I'll get straight to the point : 
    I am unable to perform recovery on my system. This is the error message : 
    It's a USB recovery media created with the HP recovery media utility on the same laptop. Tested to work correctly before I sent it for RMA on my SSD. It initially was running on a micron SSD. When I got it back, it was a samsung SSD instead, according to some benchmark results. 
    Laptop : HP Envy Spectre XT 13-2018TU
    P.S I've already opened another thread on this last year. 
    http://h30434.www3.hp.com/t5/Notebook-Recovery/Unable-to-boot-from-USB-recovery-media/m-p/2197929#M1... 
    But they were stumped. 

    I had this exact same issue on a Spectre XT Pro Ultrabook. 
    The original SSD failed and I was sent a replacement, was fortunate enough to be able to create a Recovery USB stick using the wizard in Windows. When booting from USB I received the message "You are not able to restore this system with the media".
    SOLUTION: You must NOT use the Recovery USB stick in any USB3.0 port (labelled SS). Using another USB port prevented this exact error message from appearing and I was able to complete the system restore process.
    I hope this helps someone, I signed up and posted here especially for this reason!

  • Untrusted apps are not allowed to connect to or launch Window Server before login.

    I'm getting this with the Citrix Receiver uninstaller from the command line... but not on all Mountain Lion 10.8.5 systems.  Googling turns up a lot of ideas about a problem with the app or in pre/post-flight scripts, but since it works on some, I wonder.  What is the mechanism that generates this error?  I'm guessing there's some setting or condition that exists on one system that isn't true on the other.  How do I find out?
    Sep 25 10:55:21 palms sudo[74325]:  joliver : TTY=ttys000 ; PWD=/Users/joliver ; USER=root ; COMMAND=/Volumes/Citrix Receiver/Uninstall Citrix Receiver.app/Contents/MacOS/Uninstall Citrix Receiver --nogui
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: 3891612: (connect_and_check) Untrusted apps are not allowed to connect to or launch Window Server before login.
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorFailure: This user is not allowed access to the window system right now.
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
    Sep 25 10:55:21 --- last message repeated 3 times ---
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSRegisterConnectionNotifyProc called with invalid connection
    Sep 25 10:55:21 --- last message repeated 2 times ---
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetDockRect: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetCurrentDisplayMode: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSSetConnectionProperty: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: Error enabling suspendResume handling

    Contact Wacom. Unless they have updated drivers there is no workaround.
    Update or remove Quicksilver.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Not able to connect CRM Online to PowerBI

    Not able to connect CRM Online to PowerBI, Please let me know if you have an idea to resolve this issue.
    oops, something went wrong
    Failed to update model parameters
    Activity Id59a2a854-8e34-6636-0679-3d2e245d2241
    Request Id9b7fa606-324e-4ec8-495f-13f91d03bc54
    Error Code400
    TimeWed Mar 18 2015 21:24:18 GMT-0400 (Eastern Daylight Time)
    Version11.0.9165.945
    Cluster URIhttps://wabi-south-east-asia-redirect.analysis.windows.net

    Hi Kiran
    Please chcek the Note 1359600-MDM stopped communicating after upgrading to 7.1.03 from SAP NOTES.
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1359600
    SAP Note Description:
    Summary
    Symptom
    MDM components stopped communicating after upgrading to 7.1.03
    Other terms
    TCP ports, Firewall, connection, network, SP03, SP3, 7.1
    Reason and Prerequisites
    Starting from version 7.1.03 the MDM suite is using different TCP ports for its operations. The change was in order to be compliant with the Internet Authority for Numbering Assignment. Port numbers changed as follows:
    Application Old Port # New Port #
    MDS 20005 59950
    MDLS 20008 59650
    MDIS 20009 59750
    MDSS 20010 59850
    If firewalls were configured to allow MDM's communication throughout the landscape, they actually might prevent (depending on their rules table) the communication after an upgrade to MDM suite starting at version 7.1.03 and higher.
    Solution
    Revise the firewall rules such that they will allow the communication according to the changes described above.
    In order to check that the ports are allowed to pass trough the firewall a telnet test could be done like so:
    1) Open a terminal window (on UNIX) or a command window (on Windows) on the same machine which hosts the application which tries to connect, and issue the following command:
    telnet <MDM server host name or IP address> <TCP port to test>
    2) If no error response is received than it means that the TCP port is allowed to go trough.
    3) Repeat steps 1,2 for all the other ports need by the application.
    Thanks
    Sowseel
    Edited by: sowseel pasumarthi on Jan 18, 2011 6:36 AM

  • Vendors are not replicated

    Hi Everyone,
    I am working on SRM 7.0 - ECC 6.0 landscape with Classic Scenario. When I try to replicate vendors with BBPGETVD only 2 vendors got replicated out of 288. Now when I try to replicate them again I receive a message saying "All backend descriptions are already assigned in the system". I had seen this message earlier when you try to replicate vendors that are already replicated. So I tried to use BBPUPDVD to see if I can update and get the missing vendors. However, when I get to the second screen I see that only those 2 vendors that has been replicated are considered to be updated and the remaining 286 vendor are given in a list as missing vendors.
    Can you please help me to understand why these vendors are not getting replicated? Can it be that they have missing information so SRM do not consider them for replication?
    Thank you in advance,
    asli

    see our dave important point.
    Error repliacting vendors
    Yes, just make sure that the external range in SRM starts with your lowest vendor number in ECC and ends with the highest possible number.
    There will only be 1 range in SRM but it must cover all 5 ranges in ECC.
    Just make sure your internal range in SRM does not overlap with any of your vendors in ECC or you will have major problems. I like to give SRM a very high range for internal business partners, then you can use most of the numbers for your external ranges to match ECC.
    br
    Muthu

  • Golden Gate - DML statements are not replicated to target database

    Hi,
    Testing Environment
    Source:
    OS: RHEL 4.6, Database: 11gR2, Golden Gate 10.4, ASM
    extract ext1
    connection to database
    userid ggate, password qwerty
    hostname and port for trail
    rmthost win2003, mgrport 7800
    path and name for trial
    rmttrail C:\app\admin\GOLDENGATE\dirdat\lt
    EXTTRAIL /u01/oracle/goldengate/dirdat/lt
    --TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD sys ALTARCHIVELOGDEST /u03/app/arch/ORCL/archivelog
    --DDL support
    ddl include mapped objname sender.*;
    --DML
    table sender.*;
    Target:
    OS: Windows 2003, Database: 11gR2, Golden Gate 10.4
    --replicate group
    replicat rep1
    --source and target defintions
    ASSUMETARGETDEFS
    --target database login
    userid ggate, password ggate
    --file for discared transaction
    discardfile C:\app\admin\GOLDENGATE\discard\rep1_disc.txt, append, megabytes 10
    --ddl support
    DDL
    --specifying table mapping
    map sender.* ,target receiver.* ;
    I've Successfully setup Oracle Golden Gate test environment as above.
    DDL statements are replicating successfully to target database.
    while DML statements are not being replicated to target database.
    Pl. try to solve the problem
    Regards,
    Edited by: Vihang Astik on Jul 2, 2010 2:33 PM

    Almost ok but how you will handle the overlapping (transactions captured by expdp & captured by Extract too) of transactions for the new table ?
    Metalink doc ID 1332674.1 has the complete steps. Follow the "without HANDLECOLLISIONS" approach.

  • Username and employee_id are not replicated during Initial load

    In our system we want to integrate HR in ECC (via BP in ECC) with BP in CRM.
    Our system consists of SAP ECC 6.0 and SAP CRM 5.0. HR is used for maintaining our (master)data. This all works fine, but when checking the replicated data (in CRM) there's some data missing. In CRM BP there is no EMPLOYEE_ID and USERNAME while they are in ECC BP. Is anyone familiar with this problem or does anyone know where I need to search for a solution.

    Thanks four your reply, but I already applied Note 550055. I also applied Note 934372. All the settings are right and the integration works fine. It just looks as the BDoc doesn't transfer the username and employee_id (these values are empty when I look at the BDoc).
    Concerning table T77S0,  entry HRALX/USRAC should handle the creation and linking of (not-existing) users in the target system (ie. CRM) but because the values aren't transferred I can't check whether this is the case.

Maybe you are looking for