Customised Tab in SAP LogonPad

The current SAP LogonPad has two tabs: Shortcuts and Systems. I am wondering if we can create our own customised tabs. We have plenty of systems and I think it will be good if we can place the entries into diff. tabs classified by production ERP, BI, APO, XI or country-based or Prod, QA, DEV, instead of 60+ systems on one tab.
We are currently on SAPGui 6.40.
Anyone has any idea if this can be achieved? If yes, how do we proceed?
Regards,
Annie

unfortunaztely, this functionality does not exist.
what I do to split section is that I rename conenction names and creaate fake ones:
BW -
BW DEV
BW QAS
BW PRD
CRM -
CRM DEV
CRM QAS
CRM PRD
R/3 -
R/3 DEV
R/3 QAS
R/3 PRD
this will be sorted by alphabetic name and systems of the same type will be grouped together.
for fake entries, when asked to enter a servername, enter a fake one such as "a".

Similar Messages

  • Can we add new logical system in Entitlement tab in SAP Authentication.

    Hi ,
    We already Installed and configured sap integration kit and every thing works fine. My question is as of now we connected our sap BW Dev system  to BOBJ but we would like to connect to BW Prod System to same BOBJ System. What are the steps we need to follow to do this.
    Can we just add the new logical system in entitlement tab of sap authentication in BOBJ 3.1? and import the roles and login to BOBJ USING THE Newly added SYSTEM Credentials.  Thanks in Advance.
    Thanks,
    SK.

    Hi Ingo,
    Thanks for the information.
    Are there any specific steps you need to follow when you are adding one more system to sap authentication. can you please give the steps we need to follow to setup this in right way. Thanks in advance.
    Is there any thing we need to configure on sap side other than sap logon ticket parametre. If you can please provide the steps it will be great. Thankyou very much In advance.
    Thanks,
    SK.
    Edited by: Vallabhaneni SK on Jul 14, 2009 8:53 AM

  • Customised tab in Purchase order header transaction

    Hi all,
    I have implemented ME_GUI_PO_CUST BADI for adding a tab in PO header and activated.I have put break-points and found it's not triggering.I have gone through previous forums,but couldn't find any reason.Please help.
    pls find below code I used in my BADI:
    DATA: ls_subscriber LIKE LINE OF re_subscribers.
         name type mepo_name.
    we want to add a customer subscreen on the Header tab.
    CHECK im_application = 'PO'.
    CHECK im_element = 'HEADER'.
    each line in re_subscribers generates a subscreen. We add one subscreen in this example
    CLEAR re_subscribers[].
    the name is a unique identifier for the subscreen and defined in this class definition
    ls_subscriber-name = 'Transporter'.
    the dynpro number to use
    ls_subscriber-dynpro = '1001'.
    the program where the dynpro can be found
    ls_subscriber-program = 'SAPLZTRANSP'.
    each subscreen needs his own DDIC-Structure
    ls_subscriber-struct_name = 'ZTRANSP'.
    a label can be defined
    ls_subscriber-label = 'Transporter'.
    the position within the tabstrib can be defined
    ls_subscriber-position = 11.
    the height of the screen can be defined here. Currently we suport two screen sizes:
    value <= 7 a sevel line subscreen
    value > 7 a 16 line subscreen
    ls_subscriber-height = 5.
    APPEND ls_subscriber TO re_subscribers.
    Thank you.
    Edited by: Jaya on Feb 8, 2010 10:05 AM

    Hi all,
      I am able to see the customised tab in ME23n but not in ME21N and ME22N.Any thing else shall I add in the code for this?
    following is the code I did for BADI ME_GUI_PO_CUST
    method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
      DATA: ls_subscriber LIKE LINE OF re_subscribers.
    *--FIRST SCREEN POPULATION
      CHECK im_application = 'PO'.
      CHECK im_element     = 'HEADER'.
      CLEAR re_subscribers[].
      ls_subscriber-name = subscreen1.
    *--the dynpro number to use
      ls_subscriber-dynpro = '1001'.
    *--the program where the dynpro can be found
      ls_subscriber-program = 'SAPLZTRANSP'.
    *--each subscreen needs itsown DDIC-Structure
      ls_subscriber-struct_name = 'ZTRANSP'.
    *--a label can be defined
      ls_subscriber-label = 'Transporter'.
    *--the position within the tabstrib can be defined
      ls_subscriber-position = 7.
      ls_subscriber-height = 7.
      APPEND ls_subscriber TO re_subscribers.
    endmethod.
    method IF_EX_ME_GUI_PO_CUST~MAP_DYNPRO_FIELDS.
    type-pools MMMFD.
    *constants above 90000000 for the metafield.
      FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
      LOOP AT ch_mapping ASSIGNING <mapping>.
        CASE <mapping>-fieldname.
          WHEN 'ZLIFNR'.      <mapping>-metafield = mmmfd_cust_08.
          WHEN 'ZNAME1'.      <mapping>-metafield = mmmfd_cust_09.
         ENDCASE.
      ENDLOOP.
    endmethod.
    Edited by: Jaya on Mar 8, 2010 12:55 PM

  • Unable to customise Tab (color) in Portal Theme through Theme Editor

    Hi Everyone ,
    I m working  on Themes in Portal 7.0 . I have customised the theme but dont know why i m not able to customise Tabs (Color) .
    Like When u click on System Administration ->System Configuration ->system landcape -> (There is second menu with Browse & Search ) and Overview of System Landscape pic in the Content area.
    Here Browse / Search / Overview are still apperaing in black color  .. i want to edit these and give some background color to that panel as well

    Hi Shivani,
    You would be able to change the colors on the tab by changing the following in the Theme Editor
    1. Old BSP Tabstrip under Component-Specific Styles
    2. Tabstrip element under Complex Elements
    The first one is to do with your requirement of changing the colors of the tab shown in the standard portal iViews. The webdynpro tabstrips would respect the settings under the Complex Elements.
    Well here's a caveat. Once you specify what colors you want for the tabs, you would also have to create images (Transition images, Starter images, End images) for the tabs in question so that they blend into the transitions smoothly.
    Hope it helps,
    Prathamesh

  • Permissions tab in SAP SRM Sourcing Ehp1

    Dear All,
    Please let me know the use of Permissions tab in SAP SRM Sourcing Rfx Ehp1.
    Can it be used fior collaboration.Also what is the use of technical evaluator check box in Permissions tab.
    Please help.
    Thanks,
    Ashish
    Edited by: ashish jain on Oct 21, 2011 4:42 PM

    Hello,
    Take a look at attachment of note 1261825, which displays all portal as well as SAP_GUI roles for each function in SRM 7.0/01/02.
    Regards,
    Ricardo

  • I am receiving an error message Quicktime failed to initialise error - 2096. to resolve i have been told to deselect checkboxes in compatibility tab but I have only general, sharing and customise tabs - what do i do next?

    I have been advised to resolve the problem i should go to the properties window and click the compatibility tab and deselect all checkboxes currently selected in the compatibility tab and then click apply.
    My problem is that i only seem to have general, sharing and customise tabs in my properties window.  Where do I go from here???

    My problem is that i only seem to have general, sharing and customise tabs in my properties window.  Where do I go from here???
    That sounds like you're right-clicking a folder and selecting "properties", Richard.
    Try right-clicking on the QuickTimePlayer.exe file (located inside the C:\Program Files\QuickTime\ folder), as per the following screenshot:
    ... and then selecting "Properties".
    Can you see your Compatibility tab now?

  • Need Help Trying to Populate Cross Tab in SAP BO WEBI

    Hi,
    I know in MS Excel I can  Drop Data into the Row and Column Label and get the following Cross Tab:
                                          HouseA     HouseB     HouseC
    Elevator Bank One     1     
    Elevator Bank Two                                      1
    Elevator Bank Three                               1
    I truly how this makes sense and if it doesn't, I understand and will keep looking.
    I need in SAP WEBI to be able to do the same thing.
    I have the Cross Tab created in Webi, but can't see how to populate the Rows of Elevator Banks to display which houses have Elevator banks.
    I want to show Elevator Bank 1 is in House A, Elevator Bank Two is in House B     as well as Eleveaotr Bank Three begin in House B
    This is just an example.
    Trying to Populate the Webi Cross Tab is driving me crazy.
    I have the Lay out but can't populate the data.
    The data contact is Alpha Characters, but I want just the Numeric Values
    When I go to MS Excel 2007 and Pivot this, I drop down the Eleveators into the Rows and Drop the Houses into the Column as well as the Value and the numerical values populate for me.
    Can't for the life of me figure out how it works in SAP WEBI
    Again, I hope this makes sense and if not, I'll keep looking.

    Issue resolved.
    I needed to created a message for HouseA, B and C which provided the item count needed
    Something like the following:
    Measure One
    Occupied: =Count([Elevator Bank One]) Where ([House A]="Occupied")
    Measure Two
    Vacant: =Count([Elevator Bank Two]) Where ([HOUSE B]="Vacant")
    Measure Three
    Unknown: =Count([Elevator Bank Three]) Where ([HOUSE C)]="UNKNOWN")

  • Auto tabbing in SAP UI5

    Hi Experts,
    I need to implement Auto tab functionality in side  sap.m Table .
    I have two input fields in two colums inside sap.m.table. I have fixed length Value for each input filed ,once I filled first Input field  in a row1, next cursor has automatically move to next field.
    Once row values are filled it has continue with next row until all columns .
    Auto tabbing is possible in jQuery.How to implement it for SAP UI5,could you help me out on this.
    Thanks in advance.
    product
    Quantity
    BR
    Sitara

    Hi Sitara,
    You can use the functions of jQuery in SAPUI5.
    $(function () {
    3
    $('.number').autotab('filter','number');
    4
    $('.number') here .number is the classname.
    These links might be helpful.
    jQuery Plugin For Auto Tab Form Fields - autotab | Free jQuery Plugins
    jQuery autotab examples
    Autotab: jQuery auto-tabbing and filter plugin
    Regards
    Dhananjay

  • Can SAP HANA be used with SAP LVM to provision customised copies of SAP systems within 24 hours?

    I have a requirement to automate the provisioning of new and 'copies of' SAP systems (development and QA environments) within 24 hours.
    New systems created - based on a template (e.g. an existing SAP Portal, ECC or BW system)
    New systems should have unique SID's
    RFC's, IDOC's, printers, profiles, e-mail, etc. all needs to be customisable in each new SAP system
    The systems need to be shut down overnight (to save on running costs)
    Is this possible with a combination of SAP HANA and SAP LVM?

    Hi
    SAP HANA in LVM will be doable in the near LVM 2.0 latest SP  which will come out probably around after october 14 but stay tune as the date might be pushed little due to development changes.
    AFAIK from your questions some of the features will support and some already in LVM today.
    New systems created - based on a template (e.g. an existing SAP Portal, ECC or BW system) - BSuite on HANA will be supported.
    New systems should have unique SID's - LVM use cases such as COPY, CLONE, RENAME will be supported.
    RFC's, IDOC's, printers, profiles, e-mail, etc. all needs to be customisable in each new SAP system. Not sure but Post Copy Automation should allow to do this..
    The systems need to be shut down overnight (to save on running costs). All VM operations such as power off, power on will be normal as long as you configure VCENTER in LVM.
    BR,
    Rushi.

  • Customised Reports of SAP SD

    Hi SAP Gurus,
    Can anybody plz tell me some cutomised report of SD which is not available in the standard SAP?
    Regds.......
    SUMIT

    Hi,
    These are the few customised SD report in my project:
    Swaps and Exchanges Report
    Maintain ATP Plant assignments
    Maintain SD & PO Condition Type Map
    Shipping Instruction Determination
    Maintain Virtual Plant Vendor Link
    Maintain Plant Usage for Item Categ.
    Switch 4CC message diaplay on or off
    Regards
    SD

  • Creation of a custom TAB in SAP standard Transcation

    Hi Experts,
           Request the ones who created a customized TAB in any standard trascation .Say in ME22N. We will have some tabs at Line item level. Now our requirement is to add one more tab. For that we need to know
    whether we have to create screen through se51 and attach it to screen ? or we should use any user exit or badi to create screen or we need to create screen by using configuration?
               If anybody having hand-on knowledge about this TAB creation...request you to share the same....Detailed information and fast response will be highly appreciated...Ofcourse reward points for suitable entry.....
    Thanks,
    Sampath

    Hi
    IF you want to add one subscreen in the PO screen then use  MM06E005 screen exit .
    Create your screen and activate the exit and the screen will appear on the ME21n screen.
    Other wise use the BADI for PO screen.
    Thanks
    Lincon

  • Customised help in SAP standard

    Hi everybody
    I have a very peculiar specification.
    The users want to have a customised help on the main screens - like ME21N, MIGO,MIRO etc
    I know that thers a HTML document to be attached to each screen or fields on the screen
    But how to attach them, I dont know
    anybody has any idea?

    Hi,
    pasted documentation of data element additional documentation:
    The documentation of a data element is displayed in the F1 help for each screen field that refers to this data element.
    You can enhance the documentation of the data element with screen- specific information using data element supplements. A data element supplement must be assigned to a screen. The text of the data element supplement appears in the F1 help on this screen in addition to the documentation of the data element.
    If a data element supplement is created directly with the corresponding screen (call F1 help, go to documentation maintenance with F7 or the right mouse key, and enter the number of the data element supplement in the next dialog box), the screen and the data element supplement are automatically assigned to each other. Otherwise you must maintain this link in table THLPF.
    I hope this will enable you to provide the solution in your company.
    Regards,
    Clemens

  • Using the Microsoft help icon (?) in a customised tab integrated in the help menu

    I am using the Visual Studio and customizing it for my company. I want to use their help icon in a tab in the help menu which is personalized and integrated with the Visual studio build. I am unable to find the image (?) used. Can anyone help me in locating
    the image and how to reference it so that I can use it for my integrated menu.

    Hi Emon205,
    The real issue is that which VS version you were using.
    For the VS2010, it has the VS2010ImageLibrary.zip. This file is typically installed in … \Microsoft Visual Studio 10.0\Common7\VS2010ImageLibrary\1033\.
    Please Extract All for this zip file, and then follow the directions to extract the images.
    You could get the help image here:
    ...\VS2010ImageLibrary\_Common Elements\Objects
    But like VS2013, as James's suggestion, you would download it by yourself.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to hide the Main Report Viewer Tab in SAP CR for VS2010?

    Is there any option to hide that tab page? In designing progress, sometimes it's really annoying.
    Besides, the vertical line in report appears mistakes with a tiny over-length. How to deal with it?
    Looking forward to your answers. Thanks.

    Hi Jinu,
    1) Do some or all of those subreports span multiple pages?
    2) Do each of the Subreports start on a new page?
    If yes, for both, then here's what you need to do:
    1) Create a formula (@True) with this code:
    shared booleanvar SetStatus:= True
    2) Create another formula (@False) with this code:
    shared booleanvar SetStatus:= False
    Drag and drop the @True formula on the details sections for which you want the Page Footer to be suppressed.
    Similarly, drop the @False formula on the details sections for which you want the Page Footer to show up.
    Then, go to the Section Expert > Select Page Footer c > Click the formula button beside Suppress and use this code:
    shared booleanvar SetStatus;
    -Abhilash

  • Re: How make delivery group field mandatory in va02 in shipping tab in sap abap

    /h
      Hi experts i want to make delivery group field mandatory in va02 in shipping tab using enhancements. can anybody help me
    <removed by moderator>
    With Best Regards
    Nagaraj
    /h
    Message was edited by: Manish Kumar

    Hi Nagaraj Muniyappa,
    Can please show me a snapshot of the same? Because I didn't found any delivery group field in shipping tab in VA02.
    And there are many exits/badis are available for sales order you can use them.
    regards,
    Rajesh Sadula.

Maybe you are looking for