Customizing messaging and silent mode

Several questions here:
1- Is there a way to choose to send text message rather than iMessage to a specific contact other than completely turning off iMessage?
2- Can the vibrate mode be customized to select how many vibrations for each category rather than 2 for everything? This is rather helpful when in silent mode, becasue you can set i.e. one vibration for messages, two for mails, etc (I could do this in my very basic Blackberry 8520...)
3- Is there a way to change the default that when there is one and only one new message inside the Messages built-in app and you tap it, it directly opens the new message? becasue when there's more than one you get to see the list and choose, but with only one it always opens it right away
Thank you.

@ahmedX that won't work
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Use solution manager to create customer message and apply oss notes

    Hello All,
    Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
    Currently, our Solution Manager system is bieng used for Central System Monitoring!
    Please let me your your expert thoughts!
    Thanks,
    Antarpreet

    Hi,
    By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
    Refer the  [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
    Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems.

  • Reg:Table for Custom Messages and custom Messaege Classes

    Hi ,
    My requirement is to find out all custom messages . so can any one tell in which tables all custom messages and custom message classes are stored .
    Thanks & Regards,
    Lakshmi.

    hi,
    You can checkthese tables listed below,
      T100                             Messages
      T100A                            Message IDs for T100
      T100C                            Message Control by User
      T100O                            Assignment of message to object
      T100S                            Configurable system messages
      T100SA                           Application Areas for Configurable Messages
      T100T                            Table T100A text
      T100U                            Last person to change messages
      T100V                            Assignment of messages to tables/views
      T100W                            Assign Messages to Workflow
      T100X                            Error Messages: Supplements
      T100ARBGB                    Application Area
    But The main table for storing all the message classes and their numbers are stored in table
    T100

  • End to End processes in Customer Messaging and Points card

    Dear friends
    What are the E2E business processes involved in a typical customer messaging and points card scenario for a high street retailer.
    How best can we define Customer messaging processes? And what is the right way to model these processes if they are brand new processes (i.e new processes to be added in the lifecycle). How should we map them in the first place?
    Thanks in advance,
    Jo

    Dear Johannes,
    We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
    as well as RE_RHGRENZ4 to  Set a new end date to the objects.
    At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
    Regards,
    Karina Atonaidan

  • How can I change the settings such that the phone does not vibrate when I receive a message in silent mode, but vibrates for calls?

    I'd like the phone to vibrate when I receive a call when it is in silent mode (as it already does) but I'd like it to not vibrate when I receive a text in silent mode. I know how to set both (calls and texts) to not vibrate in silent mode, or choose no vibration for texts when loud or silent, but not what I just mentioned. Thanks.

    Try this - Settings > Sounds > Text Tone > Vibration (at the top) > None.
    Edit - just read the last part of your post closer and I'm not aware of such an option.
    Message was edited by: Allan Sampson

  • Pagp and silent mode

    Hello,
    I am confused with the "silent" mode when used with PAGP "auto" and "desirable" modes.
    "CCNP BCMSN exam certification guide" book, says that "silent" is used when peer is not capable of sending Pagp frames (does not participate in pagp), so that an etherchannel is built in our side anyway.
    But everywhere(cisco's site,book), is reffered that if one peer is in "auto" mode and other in "on" mode OR one peer is in "desirable" and other in "on" mode, a channel is not formed.
    Since the default submode for both - "desirable" and "auto" - is "silent"( meaning that our side does not expect any pagp frames) why a channel can not been established?
    Thanks.

    Hello Bob Grante,
    I agree with you that the documentation is very confusing and vague about PaGP negotiation.
    From what I understand an EtherChannel will form only if one side is configured to be non-silent. I cannot confirm this because I do not have access to a etherchannel capable switch at this time.
    I quote the 3550 Software Configuration Guide 12.2(25)SE.
    "Silent Mode" (Page 31-5)
    "The silent mode is used when the switch is connected to a device that is not PAgP-capable and seldom,
    if ever, sends packets. An example of a silent partner is a file server or a packet analyzer that is not
    generating traffic. In this case, running PAgP on a physical port connected to a silent partner prevents
    that switch port from ever becoming operational; however, the silent setting allows PAgP to operate, to
    attach the interface to a channel group, and to use the interface for transmission."
    The configuration examples te
    "Configuring EtherChannels (Page 31-10)
    "non-silent -- If your switch is connected to a partner that is
    PAgP-capable, you can configure the switch interface for
    nonsilent operation. You can configure an interface with the
    non-silent keyword for use with the auto or desirable mode.
    If you do not specify non-silent with the auto or desirable
    mode, silent is assumed. The silent setting is for connections
    to file servers or packet analyzers. This setting allows PAgP
    to operate, to attach the interface to a channel group, and to
    use the interface for transmission."
    I also would like to quote Brian McGahan, CCIE #8593
    "The description of silent and non-silent is hard to extrapolate from the brief description on CCO, but this is what it means. When in "silent" mode, the switch will generate (if in "desirable" mode) PAgP and respond to PAgP (if in "auto" mode) regardless of whether the link is "silent", meaning whether or not you are recieving traffic from your neighbor.
    When in "non-silent" mode, the switch will only initiate or respond to a PAgP request if the link is "non-silent", meaning that you are receiving traffic in the interface.
    Why this is even an option I'm not really sure, but by default the switch will run PAgP regardless of whether or not traffic is being received in the interface." -- http://forum.internetworkexpert.com/ubbthreads/showflat.php?Cat=&Number=3346&Main=3256
    I think the only way to find out is to test it yourself in a lab environment. I will keep this in mind for future testing.
    Best regards,
    Leon

  • Vibration sounds and silent mode

    Recently I updated to Lollipop , and I'm not getting the options of sound, silent, and vibration mode sselections if I long press power button. Please assist how to set them?

     Check this outhttp://talk.sonymobile.com/t5/Software-Updates/Lollipop-New-Features/m-p/955490#U955490

  • Personal Services - W4/Bank Custom Messages and Badi's

    Hello Everyone,
    We are in the process of implementing ESS and have a few custom rules for certain infotypes built in to the old PA users exits. For example, we do not allow associates to have more than 3 banks, we will not allow associates to change W4 information if they have a tax levy, etc.
    Does anyone know of a way to send a message to the screen if an ESS user tries to make changes such as trying to enter more than three banks?  There is a nice Badi in the Leave Request service that allows for checks and messages to be displayed on the screen but unfortunately I am not seeing anything (a Badi to send messages) for the Personal Services W4, Bank, Address, etc.  Has anyone encountered this and if so, what did you do?
    Thanks for your help.
    Best Regards,
    Scott

    Hi Suresh,
    Ok, I do have a question for you if you don't mind me asking.  I have implemented HRPAD00INFTYUI and have tested sending messages to the ESS services and it works.  The problem I am facing is that it appears that the table PNNNN is empty, thus I can't tell in the method which infotype record is being changed.  Do you know what I must do (possibly inside the method Input Conversion) to fill PNNNN with the data that the user entered in ESS?
    Thanks,
    Scott

  • AudioServicesPlaySystemSound not woriking in [headphone & silent mode]

    Hello.
    I have some problem of AudioServicesPlaySystemSound function.
    In condition of [HEADPHONE pluged in] AND [SILENT mode] ,
    AudioServicesPlaySystemSound() does not work.
    Is this normal status?
    Do I have to use other method?
    Thank you.
    my situation :
       silent mode    headphone                situation
             OFF          REMOVE                    Sound OK
             ON            REMOVE         I can control like vibration
             OFF           PLUG-IN                    Sound OK
             ON             PLUG-IN                   Sound OFF   

    Ok, looks like I have solved my problem. After trying every thing up to a complete dump and reload back to factory new; I fixed the phone purely by accident.
    I was getting a message that said something like – this accessory is not an iPhone compatible device. Would you like to start in airplane mode to reduce the risk of external interference?
    I got that message even after restoring the phone and dumping all the data from the phone. So I was sure it was not a software thing. I loaded an iTunes song and tried to play it but the problem had not been resolved; Still no sound and no volume slider at the bottom of the screen.
    I decided I was going to take the phone to the store for possible repair. Used a can of air and blew the dust out of the data/charge port on the bottom of the phone. As soon as I did that I noticed the volume bar appeared on the screen.
    Every thing appears to be working normally now. I guess I had some foreign object in the port that was causing the phone to think an adapter was plugged in.
    Moral of my story – blow the dust and pocket lint (in this case it was my wife’s phone so it was purse lint) out of the phone ever now and then.
    Thanks for the suggestions.

  • Custom message is not getting displayed after raising do_not_save

    Hi all,
    In Order_save BADI, based some conditions, we were throwing custom messages.
    FYI., code used,
    CV_OWN_MESSAGE = 'X'.
    MESSAGE 'xxxxxxxxxxxxxx' TYPE 'W' Raising do_not_save.
    After Solman upgrade from 7.0 to 7.1, system is not displaying custom message and
    system throwing message like "The document could not be saved" only after execution of above message statement.
    How can I overwrite this system message.
    Any help would be highly appreciated.
    -Mahi

    Hi,
    Please check the below notes
    1922870 - Raising DO_NOT_SAVE event from ORDER_SAVE BADI cause dump
    1650635 - Work Center: problems when using BAdI ORDER_SAVE
    Rg,
    Karthik

  • [CLOSED]How to create a custom messages

    Hi All,
    I have a page and one save button .on press of save button, i want to show a custom message like "Applied changes are saved."
    Can anybody please elaborate how to create a custom message and how to show it through Controller.
    may i use
    OAException message = new OAException("AK",
    "FWK_TBX_T_EMP_DELETE_CONFIRM", tokens, INFORMATION, null);
    -Thanks,
    Avinash
    Message was edited by:
    user624747

    When i used the code
    OAException confirmMessage = new OAException("JTM","JTM_SAVE_SUCCESSFULL",null, OAException.CONFIRMATION,null);
    throw confirmMessage ;
    i am getting following error :
    Error :
    Application: JTM, Message Name: JTM_SAVE_SUCCESSFULL.
    I have created the message "JTM_SAVE_SUCCESSFULL" through
    Application Developer --> Application --> messages responsibility and given its type as error , application as "mobile application foundation" and then "ran the generate message" program.
    After that i checked the fnd_new_message table . the message is there.

  • Raising Customer Messages with SAP OSS on BCS issues

    Hi guys,
    I'd be keen to know everyone's opinion on raising customer messages with SAP OSS, in particular on BCS.
    Often I find that my colleagues are hesitant to raise a note with SAP because they think it either takes too long or they don't get a satisfactory answer.
    Whereas as soon as I see something fishy, that I cannot explain I will check my logic once more, check on SDN, check existing OSS notes, then raise a Customer Message immediately (while I continue to investigate/test).
    This is partly due to my experience that half the time I feel like a guinea pig in BCS, perhaps because BCS is not as widespread as other modules and i may be the first to try something so may be first to experience the problem.
    The first line response (often from Shanghai) usually tries to send the message straight back but I find with a little persistence, clear (and irrefutable) documentation , you soon get through to the experts in Germany (or is it Czech Rep?) who actually understand the issue.
    The client has paid a lot of money for the service through their SAP licensing and maintenance fees, so I have no qualms about 'reporting a product error' when I see one.
    Also, I find a lot of BCS documentation is out of date, not updated as new releases/EHPs come out, eg I recently relied on the contents of OSS note 936590, which was wrong for BCS 604. So I raised a customer message and requested that they update it, which has now been done - this is too late for me but might help someone else.
    Raising a Customer Message with OSS is not an excuse to avoid doing your job, but where there is a genuine error in BCS, I encourage others to raise OSS notes and persis with them until a satisfatcory response is received.

    Concur with TheScotsman.
    The situation is almost the same: the 1st line support (India) very often beat back the costomer message without going deep into the problem. However, if we persist and provide additional details (or when the message was made very professionally and bypassed the 1st line) the message was rerouted to consultants from Czeck Rep.). In this case the progress was significant. Since the client do not provide access to the system, in a couple of times we made a remote session: the support guy gave directions what to do in the system and where to look for some details. The problems were solved in a half an hour.

  • Messaging, mail and phone sounds in headphones with phone in silent mode

    hi,
    I just upgraded to the 3gs from the original iphone and I seem to be confused as to whether I should be getting all the different sound alerts through my headphones when my phone is in silent mode. I thought the original did that. can someone tell me if it's possible to get the sound alerts through the headphones if they're attached and the phone is in silent mode?
    thanks,

    both the new iphone and the old one both do the same way
    as long as you have the headphones plugged in you will hear it in the headphones
    there is no way to "mute" it

  • How can I do to install Patch and RDBMS using SILENT mode in a Pentium 4 ?

    I was installing the Oracle 8.1.6.0.0 in remote machines using a SILENT mode normally. But now, I`m having a problem with the Pentium 4. I need to apply a patch because of the bug number 1507768. And, after apply the patch, I don't get to install using the same response file (in a SILENT mode). How can I do to install the patch and the RDBMS using a SILENT mode in a Pentium 4?

    I've created a new domain with this command:
    $ asadmin create-domain adminport 18000 user admin dmRemineTest
    I've installed the serviceWindows with this script:
    SETLOCAL
    SET I=C:\Sun\SDK
    c:\windows\system32\sc.exe create JCAPS6U1_dmRemineTest binPath= "%I%\lib\appservService.exe \"%I%\bin\asadmin.bat start-domain dmRemineTest\" \"%I%\bin\asadmin.bat stop-domain dmRemineTest\"" start= auto DisplayName= "JCAPS6U1_dmRemineTest"
    pause
    ENDLOCAL
    like the one suggest me in this forum, and thanks for it but now i have an other problem. I've started the domain dmRemineTest and it is running:
    asadmin> list-domains
    dmRemineTest running
    domain1 not running
    Command list-domains executed successfully.
    I'm proving to access to eManager at link: http://intaliodevsrv:15000/eManager/Welcome.do
    inserting this informations required:
    Server Type: Sun Java System Application Server Domain (9.1)
    Host Name: localhost
    HTTP Administration Port: 18000
    User Name: admin
    Password: adminadmin
    I insert into HTTP Administration Port 18000 from here:
    <http-listener acceptor-threads="1" address="0.0.0.0" blocking-enabled="false" default-virtual-server="__asadmin" enabled="true" family="inet" id="admin-listener" port="18000" security-enabled="false" server-name="" xpowered-by="true"/>
    When I click on Connect to Server, eManager response with this message:
    Connection Failed. Please check the following:
    - Server Type is correct.
    - Server is running.
    - Hostname and Port number(s) are correct.
    - Server SSL configuration.
    How can I solve the problem?

  • I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate

    Hi, I have a iphone 4 with IOS 5.1.1 baseband 04.12.01 AT&T recently release me but I have presented a problem with the activation of the device, I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate hopefully help me with this problem and I have 3 months with the phone saying same message ...
    thank you very much ...

    but can not be unlocked
    If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T.  It CAN'T be used with Tigo or Movistar.
    Your post makes very little sense.  Maybe you can get some help with English. 

Maybe you are looking for

  • Remove unnecessary SD orders in SCM system

    Hello, To remove unnecessary Sales Orders regularly in SCM system I found out a program "/SAPAPO/SDORDER_DEL ". But I am unable to figure out the parameters to be used once I execute this program. Can someone please let me know, if there is a documen

  • Windowck-plugin - port of "Window Applets" for Xfce panel

    I'm releasing a new version of  windowck-plugin in collaboration with the original author Alessio Piccoli. Part of this code is based on GNOME Window Applets from  Andrej Belcijan. It's main features are: - Show the title and buttons of the maximized

  • Unable to unshare a share point due to forced drive (volume) name change.

    I just upgraded a single CPU G4 Xserve from 10.3.9 to 10.5.2. I have run into a bug that I found discussed in another thread here; the bug that two drives on the server cannot have very similar names or it leads to the File Sharing pane in Server adm

  • Asset Shut down Process

    Hi Can anyone explain the Asset Shut down process in SAP?  The business requirement is to stop depreciatin depreciation for a time period if the asset relates to product specific machine and is currently not in use.  Start depreciating the Asset agai

  • Running PSE 11 on Mac 10.8.3 but get Online Services could not be initialized, please reinstall.

    Running PSE 11 on Mac 10.8.3 but get Online Services could not be initialized, please reinstall.  Have reinstalled but get same message. Organizer WILL open but I'm wondering what I can do to fix this?