DA0003: Exception CS, Unable to run the query execute
Hi all,
I try to use a stored procedure as data provider but i get this error
DA0003: Exception CS, Unable to run the query execute
I use BusObj Full Client 6.5 pointing to SQL2005.
I choose stored procedure as data providers of a new report, then choose the Oledb connection to the database in which the sproc is saved (this sproc executes some queries, all on the same db). Then I fill in the parameter of the sproc and when i click OK I get this error.
The sp works fine if executed from a query tool. Basically it queries BusObj Security Domain in order to get the documents a single user has linked (both enabled and disabled). It doesn't do nothing exceptionall except using some table variables... I tried also with this simple func:
CREATE FUNCTION [dbo].[Yesterday] (@date int)
RETURNS int AS BEGIN
DECLARE @Yesterday int
SET @yesterday = convert(varchar, DATEADD(dd, -1, convert(datetime, str(@date), 112) ), 112)
RETURN(@Yesterday)
END;
But it returns the same error!
I tried changing middleware to the DB from oleDB to ODBC but in this case it doesn't prompt me for parameters and when i click execute it fails saying the sproc expects a parameter...
I have no idea of what the cause may be... Can anybody help please?
Hi Alberto,
Could you please test the following solutions to resolve the issue.
Solution1:
Test the issue by inserting the following parameter in .SBO file.
<Parameter Name="Force SQLExecute">Always</Parameter> .
Solution2
Just put SET NOCOUNT OFF in the end of the stored procedure SQL.
If the above doesnu2019t works then please try the following solution.
Solution3
Make the new connection from the scratch using ODBC connection and test the issue.
I hope this will help you.
Regards,
Sarbhjeet Kaur
Similar Messages
-
Unable to run the local bussiness server - Error during startup of BPA
When i installed the BPA tool and started the 'LOCAL' server in oracle BPA Network. I am getting an error saying 'Unable to run the local bussiness server'. Then i checked the log and found the foolowing errors. Please suggest !
LoG File 1:-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2009-03-10 22:18:53,199 [ ARIS Server Site Startup process ]
2009-03-10 22:18:53,199
2009-03-10 22:18:53,324 Started profile Private@17057
2009-03-10 22:18:53,324 Started profile Public@17055
2009-03-10 22:18:53,324 Started profile Agent@17058
2009-03-10 22:18:53,339
2009-03-10 22:18:53,339 Starting ARIS Nameservice 10.1.3.4.271679(Public)
2009-03-10 22:18:53,339
2009-03-10 22:18:53,339 Starting ARIS Eventservice 10.1.3.4.271679(Private)
2009-03-10 22:18:53,355
2009-03-10 22:18:53,355 Starting ARIS Nameservice 10.1.3.4.271679(Private)
2009-03-10 22:18:53,355
2009-03-10 22:18:53,355 Starting DB event initialisation 10.1.3.4.271679(Private)
2009-03-10 22:18:53,417 - event channel is created
2009-03-10 22:18:53,433
2009-03-10 22:18:53,433 Starting Aris LockService 10.1.3.4.271679(Private)
2009-03-10 22:18:53,433 - using mapping 'com.idsscheer.aris.server.dl.mapimpl.ora.AMapping'
2009-03-10 22:18:53,448 - using url 'jdbc:oracle:thin:@LOCALHOST:1521:orcl'
2009-03-10 22:21:53,459 Launch of Aris LockService failed!
2009-03-10 22:21:53,459
2009-03-10 22:21:53,459 [ There have been ERRORS, ARIS Server Site is going down ... ]
2009-03-10 22:21:53,459 Terminating ARIS Server Site ...
2009-03-10 22:21:53,459 Shutting down DB event initialisation ...
2009-03-10 22:21:53,475 Shutting down ARIS Nameservice ...
2009-03-10 22:21:53,475 Shutting down ARIS Eventservice ...
2009-03-10 22:21:53,475 Shutting down ARIS Nameservice ...
2009-03-10 22:21:55,487 ARIS Server Site terminated!
2009-03-10 22:21:55,487
2009-03-10 22:21:55,487 [ ARIS Server Site is down ]
2009-03-10 22:21:55,487
2009-03-10 22:21:58,498 Terminating ARIS Server Site ...
2009-03-10 22:21:58,498 ARIS Server Site terminated!
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606 ARIS Server Site
2009-03-10 22:59:48,606 (c) 2005 IDS Scheer
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606 [ ARIS Server Site Startup process ]
2009-03-10 22:59:48,606
2009-03-10 22:59:48,762 Started profile Private@17057
2009-03-10 22:59:48,762 Started profile Public@17055
2009-03-10 22:59:48,762 Started profile Agent@17058
2009-03-10 22:59:48,762
2009-03-10 22:59:48,762 Starting ARIS Nameservice 10.1.3.4.271679(Public)
2009-03-10 22:59:48,777
2009-03-10 22:59:48,777 Starting ARIS Eventservice 10.1.3.4.271679(Private)
2009-03-10 22:59:48,793
2009-03-10 22:59:48,793 Starting ARIS Nameservice 10.1.3.4.271679(Private)
2009-03-10 22:59:48,793
2009-03-10 22:59:48,793 Starting DB event initialisation 10.1.3.4.271679(Private)
2009-03-10 22:59:48,855 - event channel is created
2009-03-10 22:59:48,855
2009-03-10 22:59:48,871 Starting Aris LockService 10.1.3.4.271679(Private)
2009-03-10 22:59:48,871 - using mapping 'com.idsscheer.aris.server.dl.mapimpl.ora.AMapping'
2009-03-10 22:59:48,887 - using url 'jdbc:oracle:thin:@LOCALHOST:1521:orcl'
2009-03-10 23:02:49,309 Launch of Aris LockService failed!
2009-03-10 23:02:49,309
2009-03-10 23:02:49,309 [ There have been ERRORS, ARIS Server Site is going down ... ]
2009-03-10 23:02:49,309 Terminating ARIS Server Site ...
2009-03-10 23:02:49,309 Shutting down DB event initialisation ...
2009-03-10 23:02:49,309 Shutting down ARIS Nameservice ...
2009-03-10 23:02:49,309 Shutting down ARIS Eventservice ...
2009-03-10 23:02:49,309 Shutting down ARIS Nameservice ...
2009-03-10 23:02:51,321 ARIS Server Site terminated!
2009-03-10 23:02:51,321
2009-03-10 23:02:51,321 [ ARIS Server Site is down ]
2009-03-10 23:02:51,321
2009-03-10 23:02:54,332 Terminating ARIS Server Site ...
2009-03-10 23:02:54,332 ARIS Server Site terminated!
Error Log 2:Exception
2009-03-10 18:19:39,019 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 18:28:52,307 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 22:21:53,459 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 23:02:49,309 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
----------------------------------------------------------------------------------------------------------------------------------------------S1:I uninstalled BPA.
S2: I installed BPA again using the default options by selecting all the default options that the BPA showed during installation. EG. I selected 'Oracle Lite' which was by default an option.
S3: After BPA installation, I also installed BPA Publisher which i had not done last time.
S4: Restated my system and it all works gr8 now.
Actually, the BPA Publisher creats a Repository area so it should have been installed along with the BPA installation. And Since a Repository area was not found it was giving this error message again and again.
Now its all fine . Hopefully, some one else will learn from my mistakes. -
No Data Shown because an error occurred while running the query
Discoverer 10gR2 using Plus on Firefox:
I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
All parameters except the extra "Model" are shared between the sheets.
When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
Booooo.
Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
Has any body run into this behavior? Is there an answer?
-- Ron Olcott, Business Intelligence Product ManagerWhat about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
John DIckey -
REP-0495: Internal Error - Unable to tokenize the query.
Hi
I am getting error when I run xml reports .
log file is as follow
Receivables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FLUNARD module: UFlex-Debtors Trial Balance
Current system time is 27-JAN-2010 13:10:22
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_START_DATE='1999/01/01 00:00:00'
P_END_DATE='31-JAN-09'
P_CHART_OF_ACCOUNTS_ID='50268'
P_ORG_ID='103'
XML_REPORTS_XENVIRONMENT is :
/applprod/oracle/prdora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /applprod/oracle/prdora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
REP-0495: Internal Error - Unable to tokenize the query.
Report Builder: Release 6.0.8.25.0 - Production on Wed Jan 27 13:10:30 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1929569.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 27-JAN-2010 13:10:49
Thanks
RahulI suggest opening a case with Cisco TAC. This could be an issue with the device itself.
Please remember to select a correct answer and rate helpful posts -
We have some custom entries in the file 'custom.ini' that are stored in
the Sybase database.
When I start a query for these custom attributes then I get the
following error message:
"Unable to process the query. Ensure that the database connection is up.
For more information, see the error message documentation at
http://www.novell.com/documentation."
The database connection is up and running because when I start a query
of a standard attributes of ZfD then I get a result.
I get this error message just on custom entries.
I have enable the debug logs, how explaned on the documentation, but
without positive results.
Any ideas?
PetePete,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Database Error while running the query.
Hi,
While running the query in webi rich client i am having a "database error IES 10901 and WIS 10901" , it is showing that the data source name not found and default driver is not specified.
I am trying to generate report from efashion universe which is in .unx format, same client version and universe is running fine on another machine (webi rich client).
PS: The above mentioned universe is running fine on my BI launch pad, the problem is with webi rich client only.
Please help!!Hi,
Which Database your are using .
As explained by Yuvraj You need to install driver for specific database .
Ask for client or (your Database ) driver from administrator .
After installation you can see your database Driver in following path
Control Panel\System and Security\Administrative Tools\Data Sources (ODBC)
See in Drivers Tab .
If you are using oracle & client is install on your system then Check TNS Names File in NETWORK folder . -
While running the query how much time it will taken, I want to see the time
Hi Folks
I would like to know ... While running the query how much time it will be taken, I want to see the time? in WEBI XI R2.....
Plz let me know the answer.......Hi Ravi,
The time a report runs is estimated based on the last time it was run. So you need to run the report once before you can see how long it will take. Also it depends on several factors... the database server could cache some queries so running it a second time immediately after the first time could be quicker. And there is the chance of changing filters to bring back different sets of data.
You could also schedule a report and then check the scheduled instance's status properties and view how long a report actually ran.
Good luck -
Index does not exist error while running the query
Hi Everone,
I am facing some problem when i try to tun the query in BEx. When i run the query, it is giving the error "Index does not exist". Please help me out.
With Regards
Pavan
Edited by: PavanRaj_S on Mar 3, 2010 4:50 AMHi,
If you facing index problem go to mange create the index and you want to know what are all the infocubes not maintained index go db02 you can find out.
Regards
sivaraju -
Problem in running the query on ODS
Hi All,
I have been trying to run the query which consists of only 25 fields and doen't contain much calculations and routines and trying to restrict even 7000 records.
That too result in system failure reporting on storage parameters somtimes giving dump as well.
Could you please suggest me the solution for this as this is urgent requirement.
Thanks
SuryamHi,
Are you using a filter / restrictions in the query,if So create a Secondary index which can be suitable(same order) to this filterations/restrictions.
You can find the order in where cluase in the sql statement used in the query execution.you can see it in SM50.
With rgds,
Anil Kumar Sharma .P -
How to run the query in screen painter
i am using the patch 36 in business one so pls give information about
how to run the query in screen painter
regard
sandip adhavHope u have reached Screen painter interface,
1. Click 'Add Grid' from tool bar.
2. Go to 'Collections' tab in 'Properties' window.
3. Choose 'Data Tables' from the Drop down list.
4. Click 'New' found at the bottom of the Properties Window(same window)
5. U'll find the place to insert ur query.
6. U can rename the table name from 'DT_0'
7. Choose type as 'Query'
8. Clear content from box 'Query'
9. Enter ur query there. Dont forget to Click 'SET'
10. Go to Preview option from tool bar.
now ur query will be displayed as table format.
Note: First try with simple query b4 going for linking option.
Regards,
Dhana. -
How i can obtain explain plan without run the query
Hello,
i need to know the result of explain of a query without run the query, it's this possible?
Thanks and best regards.explain plan for <your query>;
select * from table(dbms_xplan.display);Regards,
Rob. -
Once the aggregated cube how to run the query
hai ,
i had cube havind lot of data .
so i was used aggregation .
after that how to run query from aggragated cube
when ever i went to rrmx . but it has showing not aggregated cube.
once aggregate the cube where is stored
plz let me knowInfoCube aggregates are <b>separate database tables</b>.
Aggregates are more summarized versions of the base InfoCube. There is an aggregate fact table, e.g. /BIC/E1##### ===> /BIC/E100027. If you don't automatically compress your aggregates, there would also be an F fact table /BIC/F100027,
There are aggregate dimension tables that are also created, e.g. /BIC/D1000271. If a dimension for the aggregate is the same as the base InfoCube, then there is no aggregate dimension table for that dimension and the queries will use that dimension table from the base cube.
As long as the agggregate is active, the BW automatically will use it instead of the base cube as long as the aggregate contains all the characteristics necessary to satisfy the query.
You can verify the aggregate's usage by looking at info in table RSDDSTAT - it will show the Aggregate number if used (will not show aggregate usage for queries on a MultiProvider if you are on a more recent Svc Pack).
You can also run the query thru RSRT, using the Exec & Debug option - check the "Display aggregate found" option and it will display what aggregate(s) it found and which one(s) it used. -
Unable to run the oracle Process Manager service
Unable to run the services of
1) oracle Process Manager service(EPM_epmsystem1)
2) Oracle Process Manager (ohsInstance1649849633)
error message is displayed as below.
Error 1053 the service did not respond to the start or control request in timely fashion.
Thanks.–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM -
Run the query with previous weeks date automatically
Hi Guyz,
I need to dynamically populate the previous weeks date value every week,
i.e Run the query every Monday automatically, with previous weeks date value .
Is there any SAP Exit which I can use ??
Regards,
Ravi
Edited by: Ravi Srinivas on Aug 4, 2009 1:40 PM
Edited by: Ravi Srinivas on Aug 4, 2009 1:52 PMRavi,
If you are thinking of re-running the previous week's queries automatically in the front-end, then U. Tummers is correct. You can create new columns alongside your existing query if you so wish and use your restrictions with an offset sepending on how far back you'd like to go.
Best,
Philips -
Checking text query validity without actually running the query: ideas?
Hi,
I would like to implement a sort of function that does a preliminary check on the validity of the search string and ideally this function should work with both CTXCAT and CONTEXT indexes (and grammars).
Initially I thought that CTXQUERY.EXPLAIN function could do this for me, but, unless I am missing something, it only works with CONTEXT indexes and it doesn't accept a string containing a text query rewrite using CTXCAT grammar (it throws DRG-11119: operation is not supported by this index type).
Plan B would be to create an empty table with a CONTEXT index and then run the query either with the CONTEXT grammar or the CTXCAT grammar via query rewrite and if the query runs, returning no rows, presumably fast enough for this purpose, then the query string is assumed to be valid.
What I don't like much about plan B is the need for an additional table plus the "dummy" context indexes just to perform the parsing of the text query, but so far I didn't come up with more brilliant ideas.
Any thoughts?
Am I missing something that does the magic without hassle?
Thanks
FlavioUnder normal circumstances I wouldn't do this, as you say I'd just run the query and catch the error, but I need to do this inside a report refresh performed via AJAX (using Oracle Apex) and the catch is that when such refresh fails owing to a syntax error, the partial refresh mechanism of APEX becomes broken, so even if you amend the query and submit a new valid string, it won't show up any more.
That's why I need to be sure that the string is valid before running the query, hence the syntax checking function.
The google-style parser sounds interesting, may be I can try to implement it in a future release of my app!
Thanks
Flavio
Maybe you are looking for
-
Select words at one in Pages 5.2.2
Hi ! I can't select words from different paragraphs at one in Pages 5.2.2 I usually did it on the other version of Pages. Can somebody help me ? Thank you
-
Open a New Window when using a Jump Query
I have created a URL jump via RSBBS transaction. I have also created a Web Application that contains my query with the jump. I want the jump to open in a new window with the Address Bars and navigational bars (Back button, etc) to show. I know the
-
Connecting iPhone to credit card terminal
I would like to connect the iPhone to a credit card terminal to process payments via the 3G network. The terminal requires an Ethernet connection, how can I connected an Ethernet device to the iPhone?
-
Hello, My preview application has been acting strangely for about two weeks. PDFs scroll very sluggishly and once they finally start moving they're out of focus for about 5-10 seconds. Before, it was like flipping through a paper, now it's frustratin
-
When I try to compile my FPGA code generated from the FPGA wizard I get this error An error occurred attempting to connect to this compile server. Details: LabVIEW: An exception occurred within the external code called by a Call Library Function Node