Data Base Layout Placement??

Hi all,
Question about entering information in a database. For example, “Will” has two sets of info that need to be shown. Not all names like "Will" have two sets of infomration. How do you attach the second set of info to be displayed on the line below “Will” without duplicating the name "Will" again?
Will 4-555-5862 Kelley Oxfor Rd Atl [email protected]
Bill Briar Rd Atl [email protected]
In other words, "Bill" should be shown beneath "Kelley", "Briar" should be on the line below "Oxfor", etc.
Thanks in advance for help,
-s
iMac G4 Mac OS X (10.2.x)

Hello
If you really want that the record 1 for Will (assuming that it is named 'name') show the name while the record 2 don't show it, I think that you will have to add a complementary fields.
For instance add a checkbox field (named 'check') which will default to uncheck.
Check it only for a second or third record dedicated to the same name.
Add also a calculated field (named nameCalc) whose formula would be:
IF('check',"",'name')
Build a template to enter the datas showing 'name' and 'check'.
To get the wanted behaviour, build an other layout in which 'name' would be replaced by 'nameCalc'.
Sort the record by 'name' + 'check' so you will display the record showing the name before the one which doesn't.
I tried to be clear but I'm not sure that I match my goal.
Yvan KOENIG (from FRANCE samedi 5 août 2006 19:41:49)

Similar Messages

Data base fields in browse mode

Appleworks v 6.2.9
Have data base with 54 fields. List mode fine, but in browse mode
only first 34 are viewable and therefore available for data entry.
When tab key is punched after data entered in 34th field cursor goes
back to 1st field rather than 35th field. Command and down arrow keys
brings up next record. Is there a keyboard shortcut or any other way
to enter data in fields 34-54 in browse mode? Using list mode for
that is too confusing because 1st field identifies record name and
once past 34th field it is no longer viewable.

Hi Frank,
I'm assuming the Layout you are referring to is the default "Layout 1" that AppleWorks creates as you define the fields. This layout, or a "Standard" layout created through the New layout menu item in the Layout menu is a simple list of fields (with labels containing the field name) one above the other in a single column.
AppleWorks Database Layouts are restricted to a single page in the page size defined in Page Setup (File menu). With the default US Letter size page, at around 34 fields, the list runs into the bottom of the page, and no fields created after that are automatically inserted into the layout.
You can place more than 34 fields on a page, but you must contribute to the process.
With Layout 1 (or any other layout you wish to modify) showing, go Layout > Layout to put the document into Layout mode. (You can also do this by pressing shift-command-L.)
In Layout mode, select one or more of the fields (and labels) at the bottom of the page and drag them up and to the right into some empty space on the layout. New fields inserted onto the layout will be inserted in the space between the bottom-most field and the bottom of the layout/page, so the object of this exercise is to open up enough space at the bottom of your layout to insert the remaining 20 fields. It may take more tthan a single step to do this.
When you have all 54 fields on the page, rearrange them in the order and in the locations you want.
Note that the default tab order for a latout is from left to right then top to bottom, starting at the top left. If this order is not suitable, you can override it using the Tab Order... menu item in the Layout menu.
Regards,
Barry

How to stored data after clicking checkbox in data base table

REPORT ZT                                      .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
              smatnr FOR mseg-matnr MODIF ID m2,
              swerks FOR mard-werks MODIF ID m3,
              slgort FOR mard-lgort MODIF ID m4,
              slgpbe FOR mard-lgpbe MODIF ID m5,
              scharg FOR mseg-charg MODIF ID m6,
              sbwart FOR mseg-bwart MODIF ID m7,
              skostl FOR mseg-kostl MODIF ID m8,
              saufnr FOR mseg-aufnr MODIF ID m9,
              srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
          pse RADIOBUTTON GROUP radi,
          bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
   msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
              JOIN mkpf ON msegmblnr EQ mkpfmblnr
              WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
     t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
       w_comm    TYPE slis_formname,
       w_status TYPE slis_formname,
       x_layout TYPE slis_layout_alv,
       t_event    TYPE slis_t_event,
       t_fieldcat TYPE slis_t_fieldcat_alv,
       t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
       1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
       4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
       9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
   14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program       = V_REPID
   it_fieldcat              = t_fieldcat
   is_layout                = x_layout
   it_sort                  = t_sort
   i_callback_pf_status_set = w_status
   i_callback_user_command = w_comm
   i_save                   = 'X'
   it_events                = t_event
   i_grid_title             = w_title
TABLES
   t_outtab                 = t_data
EXCEPTIONS
   program_error            = 1
   OTHERS                   = 2.
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
     t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
       x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
     t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
     p_outputlen p_noout
     p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
     p_hotspot p_showasicon p_checkbox p_edit
     p_dosum
     t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
   wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
   wa_fieldcat-ref_tabname = p_ref_tabname.
   IF p_ref_fieldname EQ space.
     wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
   ELSE.
     wa_fieldcat-ref_fieldname =   p_ref_fieldname.
   ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
   wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
   wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
   wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
   wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
   wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
   wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
   wa_fieldcat-INPUT     = 'X'.
   wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
     i_logo             = 'TRVPICTURE04'
   it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
     rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
   IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR.                              " U CAN DELETE
SY-MSGV2 = WA-MATNR.                              " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888'          " U CAN DELETE
        WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
   INSERT ZTABLE.
   ENDIF.
endloop.
ENDCASE.
ENDFORM.                    "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.

Hi Lakshmi,
       Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

How to stored data after clicking check box save in data base table

TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
     END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
       gw_fieldcat TYPE slis_fieldcat_alv,
       gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
          mseg JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
    SORT itab BY matnr.
    PERFORM display_alv_output.
ENDIF.
*&      Form display_alv_output
      text
--> p1        text
<-- p2        text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = 'ZREPORT'
    IS_LAYOUT                         = gt_layout
    IT_FIELDCAT                       = gt_fieldcat
   TABLES
     t_outtab                          = itab
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2.
ENDFORM.                    " display_alv_output
this is mycode .
send me replay.

Hi Lakshmi,
       Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

Simple Data Base Program for Mountain Lion

Does anyone have a recommendation for a simple data base program that will import comma delimited fields from early versions of Filemaker Pro (v 3.0, v5.0)
The ability to import Filemaker Templates and Layouts would be a big plus.
I do not need the a highly sophisticated program just something with the ability to import data from several different data bases and create layouts that look like I want them to look.
Also what is the earliest version of Filemaker that will run well on Mountain Lion ?
Thanks....Ken

I suggest Bento (by Filemaker), simple database, imports Filemaker Pro files and doesn't cost very much

Can't open aperture 3, warning box comes up," warning there was an error opening the data base for the library /pictures/aperture library .aplibrary Whats up?

I have had Aperture 3 loaded on my computer for a while now. Never had any problems till tonight. Restarted my computer and went to open Aperture and a "warning" box poped up, There was an error opening the data base for the library /picture/aperture library ap library. Then a "quit" button.
What is going on and how can I open my aperture. I have pictures that need worked for clients. Help!

Have you run through the steps in Aperture 3: Troubleshooting Basics. If not that's always a good place to start.
If that doesn;t resolve the problem when you post back describe your hardware and software setup.
good luck

Failed to load Data base information

after completeing the report in crystal when ever i want to see print preview it will say
Failed to load Data base information
and whenever i will export the report to pdf it will say
Failed to load Data base information
please solve this issue

Hi Royston,
The instance that we are accessing is: https://secure-ausomxdsa.crmondemand.com.
I assume that it's a test environment. So I navigated to (https://ebusiness.siebel.com/odcustomercare/support/alerts/staging/index.asp) "Staging & Test Environments" -> "Planned Maintenance - Staging" (since there is no Testing link) and saw a calendar of downtimes which didn't quite match-up to the date when we encountered the error. We encountered the error on November 25, which was marked on the calendar as a planned 8-hour downtime. During that day we didn't encounter continuous downtime but just erratic spurs of the the error. Am I looking in the right place? Thanks

Lightroom data base files previews

I wish to be able to Remove these Lightroom 5 Data Base Preview Files that NOW show up in my libraries pictures( June 2014 ) daily folder and also the Root Thumbnail icon that is showing.
Please note all my other photos imputed from my picture library and SDHC memory card before June 2014 does NOT have these files and it seems every time I input a photo from my memory card I get another 2 icons saying this is LRPREV FILE (no image other than a box with text) with the modified date. shows up when I select my Pictures in Windows
CAN YOU PLEASE SHOW ME HOW TO STOP THESE FILES BEING IMPUTED INTO LIGHTROOM 5.
There must be a key I can press...Thank you. David
Also I did try to delete these files in the Lightroom Folder in Windows but when I input new photos in Lightroom they KEEP coming back every time.

I feel like there may be something you're not telling us, which would explain how it came to be this way in the first place (yours is a very unusual problem).
I've heard confession is good for the soul. If you have a confession, now's the time..
For example: you have some kind of auto-import running. Or, you are storing your photos in the same folder as your catalog...
If you've got no such confession to offer, then please post a screenshot of your catalog folder (in Explorer/Finder) Windows did ya say? Mac?? Lightroom 5._? (fill in the blank)
Also, a screenshot of your folders pane in Lightroom.
And, a description of the import procedure you follow: what you do, what you see, what you click...
(+any other info that might aid trouble-shooting..).
Rob

Can't search photos using more than one word. Ruined ability to data base

I've spent hundreds of hours cataloging my photos by keywords and image titles and created a data base that is critical to my business. After installing iPhoto 11 I can no longer search using multiple words. This has made my data base useless. The "Faces" and "Places" fields will not help because those are not part of the search criteria. Is there a way to make this work? If not how do I go back to the old version of iPhoto?
thanks for your help!

How were you searching previously? Adding both keywords and title text to the search box? Why can't a smart album do the trick?
You might consider using a DAM (digital asset management) application like Expression Media. It's a professional grade image management app that can be searched for any combination of keywords, description text, title text, etc.
Click to view full size
You can learn about EM and the other pro DAM apps at the The DAM Forum. I strongly suggest you consider a more robust DAM app for your professional work.

Upgrade data base from sql server 2005 to sql server2008

Hi guys,
What is the best way for upgrade my SQL Server 2005 data base to SQL 2008?

It depends on how you want migrate, in-place or side-by-side?
In-place: Run a backup of all databases and then install the new SQL Server version
Side-by-side: Install the new SQL Server, backup all database of old SQL Server and restore them on the new one. Then copy all logins from old to new server.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Jet Data Base and MDAC

I'm being told I need to repair my "Jet Data Base" and "MDAC", I think it has to with components in the OS, but I could be wrong. I'm pretty sure it doesn't have anything to do with fighter planes. I'm fairly new at
this, I'm sure it shows. But I want to learn. It's hard to tear myself away from the screen. When I do it's usually to buy upgrades for my "rig". My question is, where do I go for definitions and more importantly, where do I find repairs for things
I didn't know where broken? If my "rig" crashes I'm afraid I might have to get a life. So if someone can point me in the right direction I'll be glad to take it from there. Am I at the right place?
Thanks

See if the following helps:
http://support.microsoft.com/kb/239114
S.Sengupta, Windows Entertainment and Connected Home MVP

Data base was broken now its fixed

When I installed 2.0 I upgraded my broken data Base because I never thought I would find the broken part anyway. Well "knock on wood" after playing with it for a little while I restarted aperture to rebuild the data base expecting to find errors all over the place. None!
I know Apple worked on the data base but I didnt expect this. I have run Cocktail in between the rebuilds but I'm pretty sure that would not of done it. Apple did it right ... at least by me.
Hope others work out too
David

If you restore to an older backup, you will get the content that is in the backup. Everything on the iPhone will be erased and you will be brought back to the time that backup was made. See this document prepared by another user about syncing to a new computer https://discussions.apple.com/docs/DOC-3141

Enforcing integrity using oracle specific data base commands .v. using fron

Full subject : Enforcing integrity using oracle specific data base commands .v. using front end.
It ought to be generally accepted that it is better to enforce integrity directly in the data base using constraints, dependencies, triggers etc rather than leaving it to specific front end programmes.
In my view, the chief advantages - of enforcing integrity directly in the data base - are:
(1) No process can violate the integrity.
(2) Being server centric, these commands run on the server and so can be easily sized in one place.
(3) One time data migration (imports) into the system using Oracle tools or SQL commands would also need to conform to the integrity constraints. Thus an implementor would be assured that the basic data is alright.
I am faced with a situation where we are about to implement a new Oracle based package. During data migration, when we discovered that there are no integrity constraints built into the target data base, the package vendor asserted that it is not necessary to build in integrity into the database. This seems to be an extreme and risky view.
Further, it is argued by the package vendor that putting constraints directly in the data base would significantly increase the needed resources (RAM) on the server. In my view, this increase is trivial and anyway, hardware costs are crashing day by day.
In the absence of integrity checks in the data base, it seems to me that every program would have to extra zero value work to ensure integrity of the end user data. It will still never be complete.
I would like to know the pros and cons of implementing without integrity constraints.
OK.

AnanthaP wrote:
Full subject : Enforcing integrity using oracle specific data base commands .v. using front end.
It ought to be generally accepted that it is better to enforce integrity directly in the data base using constraints, dependencies, triggers etc rather than leaving it to specific front end programmes.
In my view, the chief advantages - of enforcing integrity directly in the data base - are:
(1) No process can violate the integrity.
(2) Being server centric, these commands run on the server and so can be easily sized in one place.
(3) One time data migration (imports) into the system using Oracle tools or SQL commands would also need to conform to the integrity constraints. Thus an implementor would be assured that the basic data is alright.
I am faced with a situation where we are about to implement a new Oracle based package. During data migration, when we discovered that there are no integrity constraints built into the target data base, the package vendor asserted that it is not necessary to build in integrity into the database. This seems to be an extreme and risky view.
Further, it is argued by the package vendor that putting constraints directly in the data base would significantly increase the needed resources (RAM) on the server. In my view, this increase is trivial and anyway, hardware costs are crashing day by day.
In the absence of integrity checks in the data base, it seems to me that every program would have to extra zero value work to ensure integrity of the end user data. It will still never be complete.
I would like to know the pros and cons of implementing without integrity constraints.
OK.It's a shame you seem to be so far into the process and committed to this vendor. I once had a vendor tell us his product would run on Oracle but they recommended MS SQL Server because "oracle can't handle more than 5 concurrent sessions." I made sure that vendor didn't make the short list.

Device in the data base getting PXE aborted --unable to find machine using Mac address /resouce iD

hi
when I deploy osd to my unknown collection iam getting PXE aborted ..earlier we used to delete machines from sccm
by searching query based on Mac address .and clear last pxe advertisement option , but iam finding certain machines getting PXE aborted shows device in data base when we search these machines using mac address /resouce iD unable to find in sccm or
sccm data base . I have found some blogs where unknown collection parameters are changed to decommissioned value from "o" to "1"
but unable to build new unknown collection , its very difficult to delete machines from SCCM console every time when pxe aborted . machines are getting pxe aborted some way its known to SCCM ,its difficult to import machines every time before machines are
image .is there any permanent solution to override pxe aborted ,even systems are known to SCCM ,we are in sccm 2012 infrastructure
hoping a positive replay from all technical leads
thanks in advance
ankith

Hi,
"is there any permanent solution to override pxe aborted ,even systems are known to SCCM ,we are in sccm 2012 infrastructure"
I think there is not a permanent solution.
It could help if you first run the configuration manager report to locate a particular MAC address.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Will PSE3 Organizer data base transfer intact to LR

Believe it or not I like the data base in PSE3. As a matter of fact I keep PSE3 on my computer just for this. I generally back up my images to a DVD, while keeping the originals on an external drive. I then upload from the DVD to PSE3 which creates thumbs of the originals. The tag system in PSE3 allows me to tag the thumbs with categories, explicit names, dates, etc. which I can search for in any method I wish later. Being able to view thumbs of images greatly assist me in locating the image I want.
I know many of you are using much more sophisticated software, but I have over 8,000 thumbs of images tagged in PSE3. I would not like to have to go back and re tag all those images.
Question is will LR allow me to import the current PSE3 file structure and continue using the same system, and view the thumbs as always? If it does, I will get LR while the discount is in place.

Hello all:
Same question for PSE5, will LR1 receive all data from edited and tagged, ranked files. I have to make a decision about moving my db to LR. I did participate in the betas, but noticed that the bets didn't have a way to back up a group of photos (shoot or collection), with all their tags, keywords, rankings, proxy viewing files, and all the file edits, whether NEF, PSD, TIFF, or JPG, (since files are edited non-destructively). My question is for non layered edits only.
(big hole in design)
I think the biggest shortcoming of a front end (library/organizer) is backing up, with choices as to what to grab (tags, keywords, rankings, proxy viewing files, and all the file edits) and marking the files or folder or shoot/collection as having been backed up and what date. I find myself looking at a folder in Windows and having to go through 4 notebooks of discs, to remind myself if I had backed the files up and what the date was. Even so, it is very difficult to decide which (new edited) files have been created/changed and not yet backed up. My workaround (at the folder level only) was to place a 00BackedUp.txt file, with the backup date, at the beginning of the folder, which still doesn't immediately tell you whether a version of a picture had been backed up, without doing some analysis.
Backing up the library (DB) is great, but for me, its about 18 DVD's (Professional + Personal Catalogs). I don't even know if lib backups grab all the above mentioned pieces.

Data Base Layout Placement??

Similar Messages

Maybe you are looking for