Data Flow from ODS to Cube
Hi Guys,
Need a clarification!!! Iam running a full update from an ODs to a Cube. Will the data be picked up from ODs Active Table or Change Log Table.??
Thanks
Srinivas
hi,
You should do further update from ODS ONLY after "Activate data in ODS"
This means, the data will be picked from Active table of ODS.
assign points if useful ***
Thanks,
Raj
Similar Messages
-
Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik ShahHi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank -
Updating the last date request from ODS to CUBE
Dear Friends,
Please can someone explain me.
i allways update request from ods to cube, sometime there will be 3 to 4 request in the ods which wont have the Data mart (Tick) and when i update it to the cube. i can only see 1 request which is current date request. i dont know whether the previous days request has been updated to the cube.???
but i see in the ODS that all the data mart (tick) is available for all the request.
And please can someone explain me, if i have many request in the ods, current date previous day and so on.
Is there any way to update in such a way, where i can see all the dates in the Cube instead of only 1 request with current date in the cube.
when i delete the request from the cube and remove the tick from the ods, and refresh, then suddenly the current request and all the previous request TICK will be gone...
Thanks for your help.
will assign complete points.
Thank you so so muchHi,
if you know everday how many request are getting updated in infocube as one request the you can check the added records in infocube .. it should be equal to the sum of all those request ..
but transferred can be more or equal .. also its depends on the
update rules ..designing ..
Hope this helps you ..
Regards,
shikha -
Error in Data updation From ODS TO CUBE
hello Experts
We are working on BW 3.5
for FI GL line items we are loading the data to ODS and than to Cube.
earlier there was a process chain failure 2 months back so delta were stuck for 2 months now about 10 million records have been uploaded in ODS but when i am tryint to upload these records to CUBE via delta upload its giving Error
Value 'Ã
 ABC100711396 ' (hex. 'C30DC2A04C4344313030373131333936 ') of characteristic 0REF_DOC_NO c
i would like to know how to correct this and from where this error is coming as the same data is loaded to ODS and there its OK and secondly as there is no PSA bw ODS and Cube Do i need to delete the request and upload again
what if same error appears again should i write a start routine in update rule Between ODS and CUBE for special characters
thanks for repliesHi,
Goto All Elementary Tests in RSRV
Goto Master data
Select the required test
Select your Infoobject
Execute the test
You will get the result with errors or no errors
If you get errors, then you click "Correct Error" button.
Regrds,
Suman -
Hi,
i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
spHi Srinivas,
check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
Do a Init load and then do the delta load.
hope this will help. -
No data loaded from ODS to Cube
Hi,
I am trying to do init with data transfer from 0FIAP_O03 to 0FIAP_C03...
though there is data in the ODS, nothing is loaded to the cube. It just says
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Any suggestions?
Thanks
ShaliniHi
"Info IDoc received with status 8" implies that there is no data in the source.
But as you say, that data is there in the source(ODS), then there is some inconsistency in the data source and you need to replicate the data source and reactivate that.
IDoc Status 8 signifies that there is no data in the source and its not any error.
For more info on idocs check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
Also goto sm58 and clear the idoc there.
Hope this helps
Regards
Shilpa -
Data flow from ODS to Infocube
Dear All,
in the ODS object I have a certain number of records. Each record represent a repair made on a specified vehicle. For example:
Vehicle | Repair ID | Repair Date
XYZ 1 01/01/2005
FGH 4 05/01/2005
XYZ 6 06/01/2005
What I need is to create an infocube that can provide me the information about how many DISTINCT vehicle have been repaired.
In other words what I need is to put the data into the infocube according to a "SELECT DISTINCT" from the ODS object.
I kindly ask you which is the best way to do that job.
Thank you in advance.
Regards,
R.C.Dear Roberto,
thank you for your help (I'm gonna rate it immediately).
I think the problem is a little different.
I mean starting from an ODS structure like this:
Vehicle | Repair ID | Dealer Name
XYZ 1 01/01/2005 Mario Rossi
FGH 4 05/01/2005 Paolo Bianchi
XYZ 6 06/01/2005 Mario Rossi
I would like to have an InfoCube like the following:
Dealer Name(dimension) | Distinct Assisted Vehicles (KeyFig)
Mario Rossi 1
Paolo Bianchi 1
Regards,
R.C. -
We have some data loads from ODS to Cube (Deltas)
Dear Experts,
We can see request status green in DSO but in cube it is in yellow and not available for reporting (the request got compressed)
I want to make the status to green and available for reporting but i could'nt do it as i can see some popup message saying the request is already activated and change QM status not possible.
when i run the delta again that also becomes yellow status due to the previous request's was in yello status.
please suggest me how to change the status of compressed request and why it is happening.
Thank you in advance,
Kiran.Hi,
Chk whether automatic request processing--->Set quality status Ok checked or not?
It might be in manage of cube, in the menu-->goto options somewhere
as I was not before the system ...I couln't guide u exactly...
rgds,
Edited by: Krishna Rao on Mar 30, 2010 3:47 PM -
Regarding data transfer from ods to cube
dear friends,
i am new to sap bi and could you please solve my problem.
R/3 -
DSO----
CUBE
i had a sales order full load ex A1234 100
B1453 50
AND NEXT THE SALES ORDER A1234 IS CHANGED TO 200 (R/3 TCODE ME22)
SO NOW WE DO DELTA AND THE DSO HAS
A1234 200(OVERWRITTEN)
B1453 50
BUT IN CUBE I HAVE A1234 300 (ADDED INSTEAD 100 SHOULD BE OVER WRITTEN BY 200)
COULD YOU PLEASE GIVE ME A SOLUTION.
THANKSHi there,
You have several options.
The best one is to use delta between DSO and InfoCube. This will make the difference in the InfoCube between the old value 100 and the new one 200, and would give you the right result.
Diogo. -
Error in updating data from ODS to CUBE.
Hi,
I am tryin to load data manually from ODS to CUBE in NW2004s.
This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
In the CUBE, I am trying to populate fields by using the ODS fields.
For eg.
In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
For this, I have done the coding in the Transfer Structure in the Rule Group.
The time field is gettin populated , but the date field is not getting populated.
I get an error as Eg:
<b>Value '04052007' for CHAR 0DATE is not plausible</b>
Due to this, the corresponding records is not getting displayed
Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
Please help me with a solution for this.
<b><u><i>REMOVED</i></u></b>
Thanks In Advance.
Hitesh ShettyHello Hitesh
SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
Thanks
Tripple k -
Summing up key figure in Cube - data load from ODS
Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field quantity
123 301 10
123 302 20
123 303 30
Expected record in Cube
Header-field Quantity
123 60
====================
Regards,
Pramod.Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod. -
Error while loading data from ODS to CUBE.
Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddyMight means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy -
Delta load from ODS to cube failed - Data mismatch
Hi all
We have a scenario where the data flow is like
R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
The cube has an additional field called "monthly version"
and since it is a history cube , it is supposed to hold data
snapshots of the all data in current cube for each month .
We are facing the problem that the Data for the current month
is there in the history ODS but not in the cube . In the ODS ->Manage->requests
tab i can see only 1 red request that too with 0 recs.
However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
with the current month date. Could these red requests be the reason for
data mismatch in ODS and cube .
Please guide as to how can i solve this problem .
thanks all
annieHi
Thanks for the reply.
Load to Cube is Delta and goes daily .
Load to ODS is a full on daily basis .
Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
Thanks
annie -
Error while uploading data from ODS to Cube
Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar -
Error when trying to load data from ODS to CUBE
hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......
Maybe you are looking for
-
Adobe Flash Player and Mozillia
Does Adobe Flash work with Mozillia?? Mine keeps crashing!!
-
Shake smoothCam causes image to jump to the top left.
I'm still trying to perfect this clip. I used the smoothcam node and used all of the advice that you guys have given me but I can't figure out how to fix this problem..... http://idisk.mac.com/imacdoyou86/Public/smoothcam.png What variables do you th
-
How to change mac desktop icons
I want to change my Macintosh HD icon to an icon of iMac. Where do I find this and do it? I also want to change other HD icons on desktop - how is this done in Mavericks? Thanks, Don
-
Problems with an EJB refering a class in a Resource Adapter in 8.1 to 9.2 M
Hello, I have the following problem: I got an EAR let's say application.ear, the ear has a Resource Adapter inside, adapter.rar, the adapter has some jar files inside which are used by an EJB that is deployed on the same server, but the EJB is not ab
-
Restore rman backup whitout controlfile or backup controlfile
hi, I have a rman database backup and rman archivelogs bakups but no controlfile or backup controlfile. How can restore the database? thanks