Data load error for master data

hi
both errors i need to fix manually or any automatic is there
psa i need to edit that record and run again infopackage.
i need keep that infoobject(BIC/ZAKFZKZ ) alpha conversion at infoobject level.
Errors in values of the BOM explosion number field:
Diagnosis
Data record 5584 & with the key '001 3000000048420000 &' is invalid in
value 'BOX 55576\77 &' of the attribute/characteristic 0RT_SERIAL &.
InfoObject /BIC/ZAKFZKZ contains non-alpha compliant value 1

Hi Suneel,
I feel that the symbol '&' is cauing the issue in ur data loads..
So try to edit the same at the PSA and then load the data from PSa to the target..
Also u can use RSKC to handle these special Chars..
For more information u can search SDN..
Thanks
Hope this helps

Similar Messages

Loading Error for an Master Data Info Object!!

Hi all
I am getting this error for set od records...But actually ...there is no data in that...How it reflects as duplicate records...Pls tell me wht is the solution for this??U can chk the attachment as well as there is no data for the column PE FULL NAME..... which is the error stack in DTP..
But I can see the data in PSA for the particular data packet & record numbers...
Pls help with regard to the issue.
Error Information:
Diagnosis
There are duplicates of the data record 2 & with the key
 '000000000000000000000000000001E &' for characteristic ZPENAME &.
System Response
Procedure
If this message appears during a data load, maintain the attribute in
 the PSA maintenance screens. If this message appears in the master data
 maintenance screens, leave the transaction and call it again. This
 allows you to maintain your master data.

1).If source field length is more than target field length..Is it wrong if we do mapping like this?????
Yes it is wrong, its okay the otherwise though.
2)Do u have any idea of long text which exceeds 60???I saw the blog of eugene ,but not sure how far it works..Can u guide me with regard to it as my datasource is created by function module..
I never dealt with it...sry !!

Two load errors for a standard SRM Contract ODS

We've just installed standard business content for SRM Contract ODS. The standard InfoSource we installed is 0BBP_TD_CONTR_1. Two loading errors occur:
1st error:
No return value <> 0 allowed in update routines in transfer mode
Diagnosis
The return code was set to <> 0 in routine 'r0063_0SR_TARGVDC ', but the corresponding data field is updated with MOVE. You therefore can not prevent the update of a single data field for certain key values.
System Response
The load process is terminated.
Procedure
When you update with MOVE, you do not have to update all the data records. In this case you should use a start routine in the update rules in which you delete the data records that you do not want to update from table DATA_PACKAGE. Set the return code for all routines affecting a data field that is updated with MOVE to 0 (also the corresponding key field routines).
Procedure for System Administration
2nd error:
Error converting currency to standard currency (see long text!) RSBCTBBP
Diagnosis
Record number 1 : Error during currency conversion to standard currency.
The currency JPY of field 0OUTAGTARGT could not be determined.
Procedure
 Possible causes are listed below:
 - Could not find currency tables RSCURTRT or TCURR
 - Could not determine conversion date
 - Could not find an exchange rate for currency JPY in table TCURR
 Check the erroneous data record, currency unit, and date.If all data is
 available, check whether the standard currency was created correctly.
You can change it in transaction <rscur> by changing the settings for InfoObject 0SR_DEFCUR.
Furthermore, the global settings must be transferred from the source system in order to get the currency keys of the currencies (maintained for currency JPY in table TCURR). Use transaction <rsa1> to transfer the global settings. Select 'Source Systems' and choose the entry 'Transfer Global Settings' for the respective source system.
Note: we've transfer the global settings at currency from our SRM source system already, but we still get the same error msgs.
Any idea/solution?
Thanks

Hello All,
As I have already mentioned the condition types in SRM are identically matched to ERP condition type hence the data is flowing correctly and even the idoc has the z-condition type Z123.The IDOC in backend ERP has status 53.
On trial and error method we did unchecked the manual indicator check in the pricing schema for the relevant condition type and because of that now the Z-condiiton type can be seen in the backend ERP contract.
If the indicator was checked, this means that this condition can be maintained only manually (directly in the transaction
ME32K in ECC) and nothing can be transfer from other source.
Note: If the same condition type is being used in more than one pricing procedure then ensure that the check bok is unchecked for agianst the relevant condition type.
Thanks,
Yatin

Load Failure for Master Data object

Dear Sdns,
                    Am doing daily master data loading for VENODR_ATTR master data object.... Am loading it through DELTA Update.... I got an error in Status Tab.
rror message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
The Error Message is : - Update mode R is not supported by the extraction API.The application program for the extraction of the data was called using
update mode R . However, this is not supported by the InfoSource.
Kindly Help me if any of the Snd people might have face this kind of problem...
Answering Getz Appreciated,
Warm Regards,
Aluri

Hi Aluri,
The file might be used or being edited by some other person when you are doing the delta.
CHeck the source system connection @ AWB.activate it.
Follow these steps
1. Activate transfer rules for data source in source system.
2. Activate the ODS
3. Activate the update rules (ods to ods and also ods to cube)
5. Right-click at the ODS, choose 'Generate Export Data Source'
6. Replicate the data source
7.se38---->RS_TRANSTRU_ACTIVATE_ALL for source system .
Then start data loading again.
Hope this helps.
Assign points if useful.
Thanks & Regards,
Bindu

Webi error for master data attributes if universe is on top of BI query

Hi All,
We are using BO XI R2 SP5 integrated with SAP BI 7.0.
We have built a universe on top of a BI query and when we try to build a web intelligence report that includes master data attributes like Customer City,Customer Region etc BO throws the following error:
Error 1:
Database error: [SOFA Driver] : Error getting members for hierarchy (level=ZFI_I03/ZFI_I03_Q0003, member=[ZFI_I03___F172], opcode=[ZFI_I03___F172]) . System error in program CL_RSDM_READ_MASTER_DATA and form VALUEREAD-02- (see long text). Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
For a universe built on a different BI query with master data attributes mentioned above,a different error occuring.
Error 2:
Your Web Intelligence session has timed out. Log out and log in again to InfoView. (Error: WIJ 77778)
We have tried:
1) We have executed the function module BAPI_MDPROVIDER_GET_DIMENSIONS with necessary inputs query/cube and we got correct output, like members, optional properties, selected properties and restrictions.But, still our problem remains same.
2) Transaction u201CRSRTu201D and executed the query,transaction RSRV to check SID-tables and the related masterdata.
Above steps we performed in response to SAP tickets 541052 / 2009,541131 / 2009 based on logs generated,but still the error persists.
What is working:
If a universe is built on top af an infocube directly, then there is no problem with master data attributes in webi report.
Please let us know if you need more details to help us resolve this issue.

Hi Naresh,
based on the MDX you can identify that those are navigational attributes and thats why the issue is not happening when talking to the cube directly because when you connect to the cube directly the navigational attributes are not available.
Take a look at note : 996197
not sure if it will solve the problem because there are other notes when you search for the error message but this was most of the times the one that resolved the issue.
the issue is in the BAPI functions
Ingo

Data load error for Init.

Hello Gurus,
I am having some problme in loading Init,
In data load i am getting following error messages,
1,System error occurred (RFC call)
2,Activation of data records from ODS object ZDSALE01 terminated
3,No confirmation for request ODSR_45F46HE2FET0M7VFQUSO2EHPZ when activating the ODS object ZDSALE01
4Request REQU_45FGXRHFHIKAEMXL3D7HU6OFR , data package 000001 incorrect with status 5
5,Request REQU_45FGXRHFHIKAEMXL3D7HU6OFR , data package 000001 not correct
6,Inserted records 1- ; Changed records 1- ; Deleted records 1-
Please help me in resolving these errors.

Hi,
are you loading a flat file? If yes check if the file is available at the specified path and if you/sap has the authority to access that path/file.
regards
Siggi

Data Loading Error for cube 0TCT_C22

Dear Colleagues,
I am working on BI 7.0 / SP09.
I am loading technical content cube 0TCT_C22 from datasource 0TCT_DS22. Till PSA, there is no problem with data load. But from PSA to data target, data load fails. Went to monitor and it shows teh error "Error calling number range object 0TCTPRCSCHN for dimension D2 ( ). Message no: RSAU023".
I tried to find the SAP notes fro this, but no success. Also checked the Dump and application logs, but nothing is there.
Please advice ASAP.
Regards
PS

Hi Pank,
I just solved the very similar issue. Try what I did to see if it works for you. For each dimension in each Infocube a number range is created. For some weird reason during the activation of the Infocube the number range for the dimension giving troubles was not created. Look for it in TCODE SNRO and you should find a number range per each dimension in the cube but the one giving you error.
To solve it, (the easiest way I found) just add any characteristic to the problematic dimension. Activate the Infocube. After that, modify again you Infocube and remove the characteristic you just added to leave the dimension how you need it. Activate the Infocube again. By doing that you will force the regeneration of the dimension and with it the number range. You can chek in TCODE SNRO and the number range should be there. Try loading your data again and it should work.
One thing I don't understand is why that number range sometimes is not created during activation
Good luck, I hope you can solve it!!!
Regards,
Raimundo Alvarez

Down load error for video rental

I was downloading a rental to my ipod and lost wireless connectivity. when the problem was fixed I now get a download error. It tells me to tap to retry but that just repeats.

I just had the same problem renting a HD movie using the I-pod touch (HD version was not available to download in the i-tunes of my computer).
I could rent standard movies before and now I don't know what to do...

Error while loading data for Master dara

Dear Masters
I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to 0material_attr through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records for 100 records
"Record filtered in advance as error records with the same key exist"
Could u please help me to resolve this issue
Thanks in Advance
Raja

Hi
While loading master data im getting below error
"Record filtered in advance as error records with the same key exist".
When I clicked, above error Long Text, I am getting below error
Diagnosis
     The existing DTP requires a serialized update because fields are updated
     non-commutatively during the processing run (for example, MOVE).
     Therefore all new data records that have the same semantic key as
     incorrect records that have not yet been corrected in earlier requests
     or earlier data packages of the same request, are filtered out after the
     extraction in a special step. In this way the system ensures that
     incorrect data records are not repeated for your changes, which may not
     contain errors themselves.
System Response
     The data record is not updated but is written to an error stack.
Procedure
   Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration

BW - Delta for Master data not loading

Hello All,
I am not able to load delta for master data of vendor and material.
The initial load works fine but when I load delta it gives an error
" The extraction program does not support object 0vendor"
" ALE change pointers are not set up correctly"
Do i need to activate the change pointer in BD61. I was not sure so checking up with all experts.
Regards
Vanya

Hi Ravi,
We faced the same problem as you for 0MATERIAL_ATTR and we solved it by the following steps,
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
We have have got resolved by doing these steps and it may help for your problem as well.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

0COORDER - Delta Load Error

Hi,
We are having 0COORDER as a regular delta load. Today we are facing error message: 68 duplicate records found in the master data. I am updating data in series from PSA to data target.
Can you please let me advice, how can i correct this data load error in Master data?
Best Regards,
Venkat.

You should choose the option of ignore duplicate records to let this master data complete sucsessfully. I wouldnt recommend this until you find the root cause for the duplicate records. If you ignore the duplicate records, it is only going to load the first record and the ignore the records with the same key combination. What if the record with correct values came in after the incorrect record. This may lead to some inconsistency. So please check with functional folks and try to analyze the root cause.

Loading delta to master datasources

Hi All,
I am a begineer in SAP Bi,can anyone tell how to load delta for master data sources.i am in an implementation project and while loading master data found that some datasources have full updatet and some have init update,so my doubt is how can we load delta data to full update datasources..And i know about attribute change run,do we execute attribute change run after getting the delta load ??/
Thanks,
BI_STAR

Hello Star,
If you want to change the update of Master data datasources from FULL to DELTA, for that you need to check whether datasouce is compitable for DELTA, then only you can perform delta Loads to the corresponding master data datasources.
For Checking the Delta Compitabilty, please check this in T-Code RSA6, Once you open the Datasouce.
If you are changing it from FUll to DELTA, then please Init with out data and then it gives delta option in the Infopackage.
It really does not matterfor FULL or Delta, we should perform attribute change Run , this for Aggregates adjustment for newly created Master data.
Thanks
PT

Error handling for master data with direct update

Hi guys,
For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
Many thanks,
/ Christian

Hi Christian -
Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
hope it helps
regards
Vikash

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

Inital material master data load error

Hi experts,
We are on ecc 6.0 and gts 7.1.
While loading the initial material master data from R/3 to GTS,Transaction (/SAPSLL/MATMAS_DIRR3),I am getting the error ( for 1 material)-
Of 1 selected material(s), 0 were processed successfully
Message no. /SAPSLL/PLUGINR3112
When I try to load the required list of material, the error is same.
The RFC data distribution model is working for vendors and customers properly.
We want to use only compliance mngt and embargo functionality to block orders.
Can you give me some guidence?

Dear Milmuk,
it is hard to tell, why it is not working. There could be different reasons.
Please check if you have entered the correct data.
It could be that the relevant tables for transfer are not filled.
Please execute the following:
- BD53
- select message type (/SAPSLL/MATMAS_SLL)and edit it
- select a segment
- save
- deselect segment again
- activate
- set in trx BD60 the FM to the correct value
(/SAPSLL/MATMAS_DISTRIBUTE_R3)
You can than check with the programm: '/SAPSLL/PLUGIN_CHECK_R3' if
all 4 required tables (TBD24, TBD62, TBDA2, TBDME) are filled, or not.
If that's all fine I suggest you open a CSS ticket as then a more detailed analysis is necessary.
Christin

Data load error for master data

Similar Messages

Maybe you are looking for