Data migration between different ECC versions

Is there a way to migrate data between two different ECC versions?
I know that there are differences between the tables and therefore TDMS transports are not possible. But is there another way to get master data from one version (6.0 EHP 3) to another one (6.0 EHP 4)? For example a tool that can prepare the exported data for the import in a higher version?
thx

That's indeed the most feasible option we have on the table right now. Although we have a lot of Z-fields and would need to transfer them with LSMW.
The ZMATMAS has only been built for outbound...

Similar Messages

Replication between different db versions?

Can anyone tell me what limitations there might be performing data replication between different oracle database versions?
Thanks

Depends on the versions and what exactly you mean by "replication", since there are a variety of technologies that may fall under that umbrella.
You can't directly replicate data between a 7.3.4 database and a 10.1 database, for example. You can use a variety of replication technologies between a 9.2 database and a 10.1 database-- materialized views, multi-master materialized views, Streams, transportable tablesspaces-- though you cannot use things like DataGuard, which may fall under the replication umbrella in some cases.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Integration of R3 Systems(Different ECC Versions) with PI

Hi,
I have a situation where a PI system has to be integrated with R3 Systems of different ECC Version.
Please explain me what is the best practiced solution for this situation?
With Regards,
Manikandan Rajendran

Hi,
Integration of R/3 with Pi can be achieved by most frequently used communication wasy as IDOC, RFC, Proxy etc.
Now the type of communciation depends upon R/3 versions such as Proxy can be used for WAS > 6.4.
For mass data and asynchornous communciation IDOC can be good solution. In lower versions (WAS<6.4), where proxy can't be used, RFC is good option for Synchronous communciation.
Refer the similar discussion and few links as study material
Integration r/3 system with xi
Thanks
Swarup

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

Cross reference data from 2 different ecc system.

Hi Sdners,
Iam working on a scenario where i have to get data from two different Ecc system,consolidate them and send it back to their respective system.
But some refernce data in both the systems are different and when iam merging data from 2 system i have to maintain either of the reference data.But problem comes when i syndicate it back to ECC ,it cannot accept a new reference data.
Please suggest me some answere how to proceed in such case.
Its urgent.
Points will be rewarded for Genuine answeres.
Thanks in advance,
Regards,
Neethu.

Hi,
First enable keymapping property to YES for the table which you want to do
importing and syndicatig.
Create two remote systems type inbound/outbound .
Import the data from first remote system and map the corresponding fields.
Don't forget to map the remotekey field which is on the destination side.Make clone
of one of the dispaly field and map to the remote key field.
After importing you can see the records from which remote system are imported
using Edit Key Mappings option in DataManager.It shows that remotesystem
name and corresponding remote key.
Do the same for second remote system too.
After merging data in data manager , you can see the merged record and see the
two remote systems names and two remote keys by using Edit Key Mappings
option so the merged record goes back to both remote systems when you syndicate
the records.
Syndicate the data from first remote system by selecting destination properties and
output remote system property under map properties tab as your first remote
system.
Do the mapping for corresponding fields and don't forget to map the value field under
remote key .Then MDM generates remote keys for only records belongs to your
first remote system.You can see this in destination preview.It does n't genarate
remote keys for second remote system.Then check the option Suppress records
without key under map properties tab and execute the syndication.Finally we can
see the accurate records.
Do the same for second remote system too.
Hope it helps
Cheers
Narendra

How to do data migration between single node and multi node HANA systems ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Differences between different IR versions

Can you please tell me the differences between different IR versions?
Thanks

Here are the 11.1.2 specific IR changes: from the R&A Readme:
Interactive Reporting
Support for SFTP
SFTP protocol is now supported for distribution outputs generated by jobs and schedules. For more information, see the Hyperion Reporting and Analysis Framework Administrator’s Guide.
Interactive Reporting Roles
Two new roles, IR HTML Viewer and IR WebClient Viewer, have been added for Interactive Reporting. For additional information, see the EPM User and Role Security Guide.
Removal of CMC
CMC is no longer a separate web application. All functionality has been merged into the Administer module. For more information, see the Hyperion Reporting and Analysis Framework Administrator’s Guide.
There are also several Workspace changes which would could impact IR users as well, depening on your particular set up , it might be worthwhile reviewing those as well.
Cheers, Iain

Idoc data comparison between different R/3 clients.

Hi ppl ,
Is there a way idoc comparison can be done between different clients without going
by Segment by Segment comparison ?
I have a requirement wherein i have thousands of idocs in QA system and i need to
compare those with the ones in PROD system. The segments in the idocs may vary
depending on the data that flows from the third party system which will post idocs in R/3.
So, the segment wise comparison of data is also ruled out .
Do we have any standard reports which will help in achieving this purpose ?
Please let me know how the idoc data comparison can be carried out .
Regards,
Nick.

Hi Nick,
There is no standared tools available for comparing the data of two idocs.
By using beyond compare s/w you can check the data, but the thing is you have to download the idoc data to file format.
By using Idoc_xml_transform function module you can download idoc data to xml format, after you can compare.
Check this
http://download.cnet.com/Beyond-Compare/3000-2242_4-10015731.html
Regards
Ramesh

Import/Export between different Portal versions

Hi, is there any resonable argument for not allowing imp/exp between different version? The thing is a developed a Page Group on a 9i AS and now need to export it to a 10g AS. It reasonable to think that an imp/exp machanism should exist, at least, for the latest version.

Hi there,
Yes, there is a reasonable argument for that and that is that the export code will be different from the import code. This means that alterations to the code in order to be more flexible or to even fix an issue, for example, on the export won't be in-place. Now when you'll try to import with the different code this certainly will clash your system (as the problem may already be within the DMP file that you've exported).
Although your request does make sense the implementation part is not that easy to be done.
I hope it helps you to better understand the constraints...
Cheers,
Pedro.

Active Data Guard in different database versions (11.2.0.3 and 11.2.0.4)

In case of Active Data Guard can i run different database versions (11.2.0.3 and 11.2.0.4) at Primary and DR for production environment ? And will having RAC in environment make any difference?

Hi,
>>In case of Active Data Guard can i run different database versions (11.2.0.3 and 11.2.0.4) at Primary and DR for production environment ?
As per normal Data Guard requirement, Oracle 11.2 does support flexibility where Primary and Standby may have different hard wares such as CPU architecture and OS etc. but the Oracle RDBMS software version must be the same. Having said so does not mean it will not support it. Beginning with 11.1.07, a physical standby database can be used to execute a rolling database upgrade to a new Oracle Patch Set or database release by using the transient logical rolling database upgrade process. It means you can have with different database version but for how long, you need to check above documents.. For complete information you should read this note:
Data Guard Support for Heterogeneous Primary and Physical Standbys in Same Data Guard Configuration (Doc ID 413484.1) &
http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-transientlogicalrollingu-1-131927.pdf
2) >> And will having RAC in environment make any difference?
NO. You can find answer at - https://docs.oracle.com/cd/E11882_01/server.112/e41134/standby.htm#SBYDB4716
**The primary database can be a single instance database or an Oracle Real Application Clusters (Oracle RAC) database. The standby databases can be single instance databases or Oracle RAC databases.
HTH,
Pradeep

Missing photos in Iphoto Data migration between iMacs

OMG, Please help! I got my new iMac yesterday and did a data migration from my old mac. 2 hours later all my files and stuff are on the new machine.
I just went into iPhoto and it says there are 16,000 pics there, but instead of photos all I have are 16,000 blank boxes. You click on them as if you were opening a pic and all you get is a triangle with an exclamation mark in the middle.
Have I lost all my pictures??

it says iPhoto libary 129.82 GB
Sounds like the photos are there anyway.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6

Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
Yogesh

Dear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen.

Data Pump between differnt oracle versions

This is a follow on to the posting from yesterday. We have a customer database that is at 10.2.N, which we currently do not support. So they are planning on buying a new server and installing oracle at the supported version of 10.1.0.5. We are then planning on exporting the data from the 10.2 database using the schema option and then importing back into the 10.1.05 database
I thought I could use the data pump and specify the version parameter as 10.1.0.5 during the export, but according to the help that option/parameter is only valid for NETWORK_LINK and SQLFILE. I was not planning on using those options but just the default dmp file.
Am I better off just using the old export/import utilites. The schema owner has tables that contain lob elements so how does that work with SQLFILE?
Any advice is appreaciated!
thanks!

I don't think it is not supported:
C:\Documents and Settings\ATorelli>expdp system/xxxxx version=*10.1.0.1* schemas=pippo
Export: Release *10.2.0.4.0* - Production on Mercoledý, 29 Giugno, 2011 18:42:19
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connesso a: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Avvio di "SYSTEM"."SYS_EXPORT_SCHEMA_01": system/******** version=10.1.0.1 schemas=pippo
Stima in corso con il metodo BLOCKS...
Elaborazione dell'object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Stima totale con il metodo BLOCKS: 0 KB
Elaborazione dell'object type SCHEMA_EXPORT/USER
Elaborazione dell'object type SCHEMA_EXPORT/DEFAULT_ROLE
Elaborazione dell'object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Caricamento/Scaricamento della tabella principale "SYSTEM"."SYS_EXPORT_SCHEMA_01" completato
File di dump impostato per SYSTEM.SYS_EXPORT_SCHEMA_01 is:
C:\ORA\ATORELLI\APP\PRODUCT\ADMIN\MRMANREP\DPDUMP\EXPDAT.DMP
Job "SYSTEM"."SYS_EXPORT_SCHEMA_01" completato in 18:42:23
Regards

Seamless data migration between forms and other adobe products

How can I migrate data from a form to complete a pdf fillable form (such as a contract) and then send to echosign in an automated process?

Hi;
If this question is related to PDF forms created in Acrobat, and not related to FormsCentral you should post (or I can move to) the Acrobat Forms Forums: http://forums.adobe.com/community/acrobat/forms
If it is about FormsCentral, there is nothing in FormsCentral that supports automated data migration.
Thanks,
Josh

BODS code migration between different versions

Hi,
I had a code as .ATL in 12.2.2 version .I want to use this code in BODS 4.1.
Is this code is compatible with 4.1 ?
can anyone please explain clearly how can i achieve this situation?

Hi,
With respect ATL
90% compatible and again depends on which transform you are using for example Query and Validation transform 10% information you need to recheck it but not major changes.
You need to consider management console and other dependency etc..
Regards,
Manoj.

Data migration between different ECC versions

Similar Messages

Maybe you are looking for