Data Source for CRM Servies item 0CRM_SRV_PROCESS_I

Hello BI Experts,
When Extracting with 0CRM_SRV_PROCESS_I
with Transaction 'RSA3' in CRM System,
I'm not always getting the Product ID even though
I can see that Product id Exists in transaction CRMD_BUS2000116 - Maintain Service Processes ,
Please advice,
kobi

Hi,
Then triggered the initialization of delta without data transfer for data source -0CRM_SRV_PROCESS_I.
Request gets loaded into the target and is activated successfully?
if you ran info pack - init without data transfer then what you loaded to target?
But when I open the scheduler -> initialization options for source system, I could see that the initialization was not successful?
Mean is there any error?
You ran info pack - init without data transfer? then whats the info pack log says?
is it green status with 0 reocrds or red?
Delete old init if exist.
Re run info pack - init without data transfer and check it.
Thanks

Similar Messages

Data source for crm table CRMD_ORDERADM_I

hi experts,
could you please tell me the standard data source for crm table CRMD_ORDERADM_I ?
Thanks a lot!

Hi,
There would be many data sources based on this table CRMD_ORDERADM_I.
Example.
Opportunity Item Attributes - 0CRM_OPPT_ATTR_I
Bids - 0BBP_TD_QUOT_1
Depends What exactly are you looking for.
Regards,
Joe

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Cannot set up data source for SQL Server 2005

Is it possible to use Microsoft's Beta 2 version of the SQL Server 2005 JDBC driver with WebLogic 9.0? I've downloaded the driver and added it to my server classpath, but when I try to create a new data source using the admin console, the drop-down list for Microsoft SQL Server only contains drivers for the 2000 version. If I select "Other" from the list and try to move on, I get a cryptic, page-long error on the admin console. If I just select the 2000 driver and try to manually modify the parameters on the next set of screens, I still get errors when I try to test the configuration. I've successfully used a third-party driver before, but this one does not seem to be working. Any help would be greatly appreciated.
Regards,
Sabrina

SabrinaL wrote:
Is it possible to use Microsoft's Beta 2 version of the SQL Server 2005 JDBC driver with WebLogic 9.0? I've downloaded the driver and added it to my server classpath, but when I try to create a new data source using the admin console, the drop-down list for Microsoft SQL Server only contains drivers for the 2000 version. If I select "Other" from the list and try to move on, I get a cryptic, page-long error on the admin console. If I just select the 2000 driver and try to manually modify the parameters
on the next set of screens, I still get errors when I try to test the configuration. I've successfully used a third-party driver before, but this one does not seem to be working. Any help would be greatly appreciated.
Regards,
SabrinaHere I describe the steps I took to bypass the console in making a new pool.
1 - Edit the script %DOMAIN_HOME%\bin\startWebLogic.cmd to add a line like this:
set CLASSPATH=%CLASSPATH%;\new_ms_driver\beta2\sqljdbc_1.0\enu\sqljdbc.jar
In other words, you have to explicitly add a third party driver's classes to
the CLASSPATH that will be in effect for the server. Just adding the driver
to your window's class path will do nothing.
2 - Go to the directory %DOMAIN_HOME%\config\jdbc, where you will find
files of the name *-jdbc.xml. Each of these represents a DataSource.
Copy one of them, perhaps either examples-demo-jdbc.xml, or
examples-demoXA-jdbc.xml depending on whether you want to make an XA
or non-XA pool. Make you new file's name like the name of the DataSource,
still ending in -jdbc.xml. Eg: MS_Beta-jdbc.xml
3 - Edit this file to change as much as would be clear for the
driver you want. Eg: change the driver class to the class you want,
the user name, URL, test table etc. Also, change the pool's initial
capacity to 0. This is so the pool can be created without making a
connection. We need that because the password is encrypted, and
there is no manual way for you to add the correct one yet.
4 - go one directory up, and edit the config.xml. Find a
jdbc-system-resource entry corresponding to the original
resource file you copied. Make a new entry in the config file,
like the original, but change the Datasource name to your new one.
5 - If this all went well, reboot your server and go to your data
source in the console, and edit it. Alter the password to what it
really should be, and you can also change whatever else you might
want.
6 - shut down again, and reboot, and you should then be able to go to
your data source in the console and test a connection.
That's it. Here is an example of a jdbc.xml file I made, and
the entry I made in the config.xml:
config/jdbc/newpool-jdbc.xml:
<?xml version='1.0' encoding='UTF-8'?>
<jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/domain.xsd">
<name>newpool</name>
<jdbc-driver-params>
<url>jdbc:sqlserver://frogger:1433</url>
<driver-name>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-name>
<properties>
<property>
<name>user</name>
<value>joe</value>
</property>
</properties>
<password-encrypted>{3DES}cPpx2Z6faqY=</password-encrypted>
</jdbc-driver-params>
<jdbc-connection-pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>5</max-capacity>
<capacity-increment>1</capacity-increment>
<shrink-frequency-seconds>900</shrink-frequency-seconds>
<test-connections-on-reserve>true</test-connections-on-reserve>
<test-table-name>SQL select 1</test-table-name>
<profile-type>0</profile-type>
</jdbc-connection-pool-params>
<jdbc-data-source-params>
<jndi-name>newpool</jndi-name>
<global-transactions-protocol>TwoPhaseCommit</global-transactions-protocol>
</jdbc-data-source-params>
<jdbc-xa-params></jdbc-xa-params>
</jdbc-data-source>
config.xml entry:
<jdbc-system-resource>
<name>newpool</name>
<target>examplesServer</target>
<descriptor-file-name>jdbc/newpool-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>

Looking suitable CRM data source for Marketing Plan & Campaign

Hi Experts,
I'm a BI guy & looking suitable CRM data source for Marketing Plan & Campaign.
and the related base tables from where it picks the data.
I saw two DS,
0CRM_MKTPL_CAUSAL                 Extraction of MDF Causal Data
0CRM_MKTPL_VO_TRANS               Vouchers Usage extraction
but not sure if it is correct one .
and also a DS 0CRM_SALES_ACT_I                  Activity Item
here business has created some test data for Market Plan & Campaign which i can see using Tcode crmd_order but could not able to see the same data in RSA3 from 0CRM_SALES_ACT_I .
Please hekp me.

got the solution!

Using Oracle BI Server as a Data Source for Third Party Tools

I have been researching how to use the Oracle BI Server as a data source for two days now. I have not yet found a solution to my problem.
We have a remote user who is pulling data from one of our Oracle databases using automated tools. This data base is essentially being replaced by Oracle Analytics. However, we do not want this user to get at the physical tables of Analytics, rather, we want the user to be able to connect to the Oracle BI Server itself, and issue Logical SQL to pull data.
Here are the requirements which I need to be fulfilled:
1) The ability for a remote user to connect to the BI Server as a data source.
2) The remote user must be able to do this on a Unix box.
3) The remote user must be able to automate the process of issuing SQL to the BI Server. (Command line interface is preferable)
4) The solution needs to be easily implementable, that is, this solution will be implemented many times over.
I found many articles explaining how to set up a Windows box to connect to the BI Server in this way. However, these articles outline how to use tools like Excel and Microsoft Query to pull data from the BI Server. Our current user is using SQLplus.
If possible, I would like the user to continue using SQLplus as the tool for connecting to and retriving information from our BI Server. I have tested using SQLplus many different ways to no avail. I have also tried using other tools, such as Oracle SQL Developer.
Is there a program out there that will fulfill the needs I have outlined above? Or, does someone know of a way to use SQLplus to connect to the Oracle BI Server as a data source? Or, is there a series of solutions which will fulfill the needs outlined above?
Edited by: user11177366 on Jun 11, 2009 11:46 AM

I agree it would be inefficient but only because you are using OBIEE for something it was not designed to do. You are basically asking for a "DB feed" and that should designed using PL/SQL, DB Links, Web Services or whatever is your entreprise standard to send data from one system to another. Using OBIEE for this seems a bad architecture decision to me.You are correct, the BI Server is not really intended to be queried like another Oracle Database remotely. However, the reason we are trying to do it this way is twofold:
1) We want to enforce data level security.
2) The BI Server has been fine tuned for high performance.
Forcing the end users to go through the BI Server rather than directly to the physical tables or other sorts of systems built on top solves both of these issues.
I think you are wrong. I don't see why SQLPlus should be able to query the BI Server. The BI Server can sit on top of many different DBs not just Oracle, even flat files etc. So you can't really expect the BI Server to able to translate all that into Oracle SQL output so you can query it using SQLPlus. The BI Server is not an Oracle RDBMS.You're right again. The BI Server isn't an Oracle RDBMS, and I have been wanting to treat it like one. From the data I have gathered SQLPlus can't query the BI Server.
However, my research has led me to realize that the BI Server supports the JDBC API. Therefore, (I should have went down this route in the first place) one can use the JDBC driver provided by Oracle (bijdbc14.jar) to interface with the BI Server. There are many programs and applications out there that support the JDBC API and let us connect to BI Server the way we want to. Furthermore, these programs are mostly platform independent, as they are mostly written in Java.
Lastly, from what I understand the NQCMD program can be installed on any platform as well (provided by Oracle). This is another option to connect to the BI Server as well.
Thanks for your help and your comments as I went through this process of discovery.

Need urgent help to generate SPL Data Sources for Line Items

Hi All,
I am trying to extract the Special Purpose Ledger Data from R/3 into BW. To do this, I am following the steps to generate the Data Sources for Totals table and Lien Items Table.
Using Transaction BW01 and BW03 on the R/3 side, I am able to generate the Totals Record-DataSource successfully.
But I am not able to generate the Line Items-DataSource. I am using the same procedure.
Can someone please help me or point me in the right direction. Are there any other settings I need to make to generate the Line Items-DataSource. Interestingly, I am able to generate the Line Items-DataSource for some other old ledgers in the System like ZZ and ZX. But I need the Line Items-DataSource from a ledger called ZP for which I am having trouble.
I would greatly appreciate if someone can get back to me ASAP.

During BW01, The Generate extract structure is fine for both Total and Line Item Table.The issue is when we run tcode bw03 where you assign the datasource to a ledger.
Here, I can assign only for the Total Records data source and NOT for the Line Items-DataSource.
I hope I could explain the issue. Looking forward for some advice.

Line Items Data Source for General Ledger

Hello everybody,
I'm trying to generate a Data Source for Line Items (new General Ledger) in transaction FAGLBW03. When I generated a Total Record-Data Source, everything was done correctly. When I try to generate a Line Item-Data Source, I receive following error message: "Extractors for general ledger documents are not yet supported". I was looking for any SAP notes that would explain this issue, but I couldn't find anything.
Could you please tell me how can I generate Data Source for Line Items? Add some SP, use some another transaction, ...?
Thank you for any help
Janule

Hi,
Can u tell me how did u solve that problem.
i m facing same.
/sachinkumar.

Apache Directory Server as data source for Portal UME?

Hi,
Has anyone tried using Apache Directory Server as a Data Source for Portal UME? We would like to try that out. If anyone has tried before I would like to get the data source configuration file. ALso would like to know more in detail about the positives and negatives.
Thanks for your help.
Regards,
Vishnupriya

try to configure as stated in the following document.
http://help.sap.com/saphelp_nw04/helpdata/en/18/5cea2296190e4cb7faf9468ad793ea/content.htm
I have seen several discussions on sdn on the same, also make a keyward search on sdn.
Also check this for pros and cons for having Apache ...
Problem while configuring the Apache Web Server as the Intermediary Server
Edited by: SJ on Aug 3, 2008 10:11 AM

SQL server as data source for OBI EE : Urgent

hi everyone,i have been using OBI EE for the past 2 months.I have been using Oracle 10g database as a data source for OBI EE and it worked just fine and now im trying to use SQL server 2005 as my data source.
My ODBC was succesful and i can import from that database but i get following errors when i try to update row count.
There was an error while updating row count for "test"."AdventureWorks"."HumanResources"."Departme nt":
[nQSError: 16001]ODBC error state: S0002 code: 208 message :[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'Department'..
[nQSError: 16015]SQL statement execution failed.
Shahzad

With Sql Server I have always problems with security
Check this first and then continue..
1.your odbc connection
2.in the administrator--> connection pool you have assign the appropriate values for sql -server(check all the options)
and check the option -->fully qualified table name
i hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

How to configure data source for MS SQL 2005 Server.

Good morning,
While creating a data source for MS SQL 2005 Server, what are the values I should use for:
Object Factory, DataSource Type, and CPDS Class Name values ?
Thanks
Seenu

seenuFour wrote:
Hi,
I am working on a web application, the backend of which is a MS SQL 2005 server. I am creating a data source on the application server to manage the connection pool.
Hence I need to give the following values while creating the data source:...
Hence you need to provide some actual detail about what the context is.
IIS runs "web applications" but your question would have no meaning in that context. On the other hand it might have some meaning if you were running Tomcat.

Configurational settings for data source in BI server

Hi Sdns,
Where can we make configurational settings for data source in BI server.
Advance thanks to replies.
karun

Go to T-code RSA13.
Search you desired BI system.
Right click on it and Display Data Source Tree.
There you can see all your datasource with BI as source system.
You can do the same for other source systems.
Double click on the datasource to see the fields and configuration.

CRM 7.0 - Enhancement of Data Sources for interactive Reporting

Hallo All,
I would like to know whether anybody has positive experience with the enhancement of CRM Data Sources for interactive Reporting. I read that the enhancement of Customer fields should be possible (Those Data Sources below the Hierarchy node /CRMBW/ROOT).
I have seen that the extract structure can be enhanced via RSA6 (as for other data sources).
Questions:
1. Which USEREXIT / BADI has to be used to fill the added fields?
2. Does it work?
Best regards

Hi!
Those DS are not meant to be enhanced manually but only by one of the following two ways:
1. Adding custom fields with the Application Enhancement Tool (AET) in the CRM UI.
2. Adding SAP fields with the Interactive Reporting Enhancement Workbench (IREW).
The AET is available since CRM 7.0. Please find more details in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     WebClient UI Framework
                         Application Enhancement Tool
The IREW is available since CRM 7.0 EhP1. More details can be found inside TX CRMD_IREW or in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     SAP Customer Relationship Management
                         Analytics
Best regards

Master Data source for sales district or Region in CRM

Dear All,
Please let me know the Master Data source for sales district or Region in CRM.
Thanks
Regards,
Sai

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

BW-CRM - Business Content Data Source for Service Ticket

We are setting up BW for CRM. We want to analyze data related to Service Ticket. I am trying to find Business Content Data Sources for Service Ticket. I could not find any thing under Interaction Center Delivered analytics. I appreciate if any of you BW Experts can guide me in the right direction. Thanks for your help in advance. I am using RSA6 to look into delivered Data Sources

Hi Nilesh,
Thanks for the update.
I can enhance 0HRPOSITION_ATTR to include Number of hours per month & Number of Hours per Week (WKAVG & MOVAG).
My last question is which object (Employee,Position,Job) do i need to enhance
for PA0007: WOSTD( Hours per week) - It will be used to calculate STAFF FTE
Thanks for the help

Data Source for CRM Servies item 0CRM_SRV_PROCESS_I

Similar Messages

Maybe you are looking for